How To Replace Kenmore Elite Water Filter

Kenmore Elite Refrigerator Water Filter – How To Replace

Written by Todd Fratzelon Kitchens,Maintanence UPDATE: A large number of comments have been submitted in the comment area from people who have reported having problems with their water dispensers after installing the new water filter. Please see below for more information. For example, the following are some options for troubleshooting the issue:

  • Make careful to REMOVE the filter end caps from the old water filter before installing the new one. In this case, these are two red pieces of plastic that cover the two ports on the end of the water filter
  • The instructions are extremely detailed on how to purge air from the system after the filter replacement has been completed
  • Once the new filter has been installed, it is necessary to purge the water from the dispenser with a big container. Follow the manufacturer’s instructions, which are as follows: Hold the water dispenser lever down for 5 seconds with a sturdy container, then release the lever for another 5 seconds with the same robust container. Continue until the water starts to flow. Continue pressing and releasing the dispenser lever for an additional 2 minutes after the water starts to flow (5 seconds on, 5 seconds off). This will remove any air that has accumulated in the filter and water dispensing system. In some cases, additional flushing may be required
  • If none of these methods are successful, it is possible that you have one of the following problems: a faulty water valve, a frozen water line (the water line actually travels from the bottom of the refrigerator up through the freezer door! ), or faulty electronic components. These are the kind of scenarios in which a skilled repairman is required

Kenmore Elite Water Filter Replacement

Remember to REMOVE the filter end caps before you begin installing the new water filter. As seen in this illustration, these are red pieces of plastic that cover the two ports at the end of the water filter; the instructions are extremely clear on how to expel air from the system following the filter change. To purge the water from the dispenser once the new filter has been installed, you will need a big container. In accordance with the manufacturer’s recommendations, Hold the water dispenser lever down for 5 seconds with a strong container, then release the lever for another 5 seconds.

Maintain constant pressure on the dispenser lever (five seconds on, five seconds off) for an additional two minutes after the water starts to flow.

In some cases, additional flushing may be required; if none of these methods are successful, it is possible that you have one of the following problems: a faulty water valve, a frozen water line (the water line actually travels from the bottom of the refrigerator up through the freezer door!

Such circumstances necessitate the use of a skilled repairman.

How To Replace Kenmore Refrigerator Water Filter

  1. Remove the new water filter from its packaging and remove the two red shipping caps that are attached to the end of the filter
  2. As seen in the photographs, the water filter is positioned on the front panel, near the floor. Release the water filter by pressing the release button, which is situated close to the left of the water filter. Remove the grille cap, which will allow the filter to be released. Counterclockwise twisting the grille cap away from the filter will do this. Ensure that the grille cap on the new water filter is securely fastened. Organize your refrigerator by placing the new water filter in it and ensuring sure all of its phrases are facing the right way up
  3. To install the water filter, push it in until it snaps into place.

Flush Water After Installing New Filter

Please make certain that you flush the water from the new filter once it has been replaced! Many readers are experiencing difficulties with airlocks because they have skipped this crucial step. The manufacturer of Kenmore suggests that you run the water out of the water dispenser and ice maker for a few minutes to flush out the new filter. This also aids in the removal of air bubbles from within the system. Unless you do this, it is conceivable that the water dispenser will not function correctly as a result of a buildup of air.

This particular water filter claims to reduce:

  • Cysts and turbidity – both of which are associated with gastrointestinal issues
  • Lead
  • Chlorine – improves the flavor and odor of water, resulting in better-tasting water
  • For cleaner water, sediment is used. o-Dichlorobenzene – has been related to an increased risk of liver, renal, and circulatory system issues. Benzene has been associated with an increased risk of cancer and anemia.

I seriously doubt that any of our town’s water systems are seeing any trouble with these concerns. However, we have noticed that the water tastes significantly better once it has been filtered, therefore we will continue to change the filter on a regular basis.

How to Change a Water Filter in a Kenmore Refrigerator

Documentation Download Documentation Download Documentation In order to keep your water and ice dispensers fresh, refrigerators feature filters that remove impurities from the water and ice dispensers. These filters should be replaced every six months. Kenmore refrigerators are either equipped with an internal filter located towards the top of the machine or with an external filter located at the bottom of the machine under the doors.

Both types of filters require just a little amount of maintenance; just make sure you choose a replacement filter that is compatible with your refrigerator model.

  1. Read More About ItRead More About It In order to keep your water and ice dispensers fresh, refrigerators feature filters that remove impurities from the water and ice. These filters should be replaced every six months. Kemmore refrigerators are either equipped with a filter located inside of the refrigerator towards the top of the machine or with a filter located on the bottom of the refrigerator under the doors. Just make sure you have a replacement filter that is compatible with your refrigerator model before you begin. Both types of filters require very little maintenance.
  • It is possible to purchase filters for your refrigerator either online or through a local appliance store. Refrigerator filters are typically priced between $25 and $30 USD.
  • 2 Look inside your refrigerator for the filter container. You won’t even need to consult your refrigerator’s user manual for this, because it’s virtually always feasible to estimate the placement of the filter based on the following basic information:
  • All of the smart refrigerators have the following features: Corner of the upper left (often hidden below the top shelf)
  • French door refrigerators (which have two refrigerator doors and a bottom freezer): In the lowest section of the refrigerator’s door, within the lowest compartment
  • Fridge/freezers that are side-by-side (with two full-length doors): For the majority of models, it is located in the upper right corner. Examine the base compartment of some models (such as the Kenmore 5175x series)
  • If you don’t notice the filter compartment in any of these locations, look for a little dial near the crisper drawers
  • If you don’t see it there, look for it elsewhere.
  • Advertisement
  • s3 To open the filter compartment, push or pull the tab on the side of the container. Look for a button or tab on the end of the cylinder that is closest to your position on the cylinder. Pulling or pushing the tab will open the compartment and show the old filter
  • 4 removing the old filter Remove the filter by turning it counterclockwise and pulling it out. Holding the main body of the filter in your hand, turn it counterclockwise to loosen it. In order to remove the filter, rotate it by a quarter turn and carefully pull it toward you to remove it. This is because, if your filter does not twist when rotated, it may just pull straight out of the container when you attempt to rotate it. Once the filter has been removed, it may either be thrown away or recycled.
  • Placing a small hand towel below the filter is recommended since it may leak water when you remove it.
  • Removing the replacement filter’s seal from its end is step 5. To begin, remove the replacement filter from its packaging and locate the cap on one end. Remove the lid from the new filter in order to reveal the port that connects to your refrigerator. Some filters may additionally include a piece of foil covering the end, which is common in the industry. If your filter is covered with foil, make sure to remove it before reinstalling the filter in your refrigerator
  • 6 Insert the replacement filter into the container by screwing it in clockwise. Feed the filter end with the port into the hole in the filter compartment by inserting it through the hole in the filter compartment. Maintain the horizontal position of the filter so that you can simply align the threads to screw it in. To secure the filter in place, rotate the filter clockwise by a quarter turn to the right. Once the filter has been installed, shut the chamber to ensure that it is completely sealed.
  • 5Unscrew the rubber seal at the end of the replacement filter. Remove the new filter from its packaging and look for the cover on one end. Remove the cap off the new filter to reveal the port that attaches to your refrigerator. Replace the cap on the new filter. Some filters may additionally include a piece of foil covering the end, which is common in the pharmaceutical industry. When reinstalling the filter in your refrigerator, make sure to remove any foil that may have been attached to it. Then, insert the replacement filter into the compartment by screwing it in counter-clockwise. The filter compartment should have a hole in it where you may feed in the filter’s port. Maintain the horizontal position of the filter so that you can easily align the threads when screwing it in. To secure the filter in place, rotate the filter clockwise by a quarter turn. The container should be sealed when the filter has been fitted.
  • 7 If the light above the “Filter Reset” button is yellow or red, press the “Filter Reset” button. When you change your water filter, the “Filter Reset” button near your water dispenser may illuminate in yellow or red to indicate that it has been reset. Once the new filter has been installed, press and hold the button for about 3 seconds to ensure that your refrigerator recognizes the new filter. Either the light will go out or it will change color to a blue or green tint
  • If the buttons are not visible on the outside of your refrigerator door, they may be on the inside. If the light does not change colors after you remove the filter, try pulling it out and putting it back in again.
  1. 1 Purchase a new filter that is compatible with your refrigerator’s model. Check the model number on your refrigerator, which may be found either in the user manual or on the interior of the refrigerator. Make a note of the model number so you don’t lose track of it. If your fridge has a filter, look for one that is compatible with it online or at appliance stores
  2. Otherwise, the filter will not fit or function correctly.
  • As long as the filter is compatible with your refrigerator, you may use a Kenmore filter or purchase one from a third-party vendor. Filters are around $30 USD apiece, however you may be able to save money by purchasing numerous filters at the same time.
  • 2 To remove the fridge from the cabinet, turn the dial on the bottom of the cabinet counterclockwise. Locate the filter dial that is related to the grill that is located underneath your refrigerator doors. Then, using a quarter-turn counterclockwise, disengage the dial from its lock position and immediately pull the filter straight out of your refrigerator until it is entirely gone
  • Set down a little hand towel beneath the filter chamber in case any water leaks out when you remove the filter
  • Helpful hint: If the filter does not twist in either direction, release the filter by pushing the button located beside the dial. Three things must be done: 1 press the button to detach the filter and 2 pull it out to remove it. Slide the dial handle onto the new filter by squeezing the handle. Check which direction the dial slides on the end of your old filter glides, and then push or pull the dial perpendicular to the filter to remove it from the filter. Make sure that the edges of your new filter’s end are aligned with the slot on the dial and then slide it into place until it is secure. When you’re through with it, you may either toss it away or recycle it.
  • Pulling the dial until it pops off the filter may be necessary if the dial won’t fall off on its own. Then, at the end of the new filter, turn the slider to the right.
  • 4 Reinstall the new filter in your refrigerator and turn the knob clockwise. Using your fingers, gently push the end of the filter that attaches to your refrigerator into the filter compartment until it snaps into place. To put the dial back in its original position, rotate it one quarter turn clockwise. The water dispenser and ice cube maker in your refrigerator will be operational once the filter has been replaced.
  • If you removed the old filter by pressing a button, push the new filter in until it fixes itself in place.
  • 5 If the “Filter Reset” button shows an orange or yellow light, press and hold it for three seconds. If your refrigerator detects that the filter has been replaced, it may display an error message. The “Filter Reset” button should be located near your water dispenser. Press and hold the button for 3 seconds to reset the filter. The light will transition from yellow or orange to green or blue as the day progresses.
  • Modern refrigerators may contain a touchscreen menu that may be used to reset the filter. If the light does not change colors after you remove the filter, try removing it and re-installing it.
See also:  Why Is My Heat Pump Leaking Water Outside

Create a new question

  • Question What should I do if the knob that is used to install or remove the filter has become disconnected from the filter? That’s what occurred when I was attempting to remove the old filter. Continue to press the left button while using a closed pair of scissors (or a screwdriver) to slowly wedge out the old filter with the right. The knob is quite inconvenient! Afterwards, you may get an appropriate replacement knob
  • Nevertheless, it is advised that you consider purchasing a second knob as well, because the little tab is prone to breaking off
  • And Question Will the water be usable if it is not filtered? In the majority of situations, yes. If you do not use a filter, it is possible that the water is not safe to drink. Question What is causing my filter light to remain illuminated after I have replaced the filter? In order for the filter sensor to reset, you’ll need to completely unplug the refrigerator for one minute. Question Is it acceptable not to update the water filter if we aren’t going to use it? Yes, as long as you don’t use any water or ice, you’re OK
  • Question Is it necessary to grease the filter tip on my refrigerator when it is replaced? No. You don’t want to put any things into the water that may end up contaminating it. Question Following the installation of a new filter, how much water should I run through it? According to the instructions we received, we were supposed to run three gallons through the system before utilizing the water. Question What is the best way to locate a video tutorial on how to alter my filter? James Snow is an American actor and director. Community Answer Go to YouTube and look for various videos that will walk you through the process of removing the old filter and replacing it with a new one
  • Simply search for the brand of your refrigerator and the stock number for your filter and a video on how to change it should appear

Inquire about something There are 200 characters remaining. Include your email address so that you may be notified when this question has been resolved. SubmitAdvertisement

  • Replace your refrigerator filter every six months to ensure that your water and ice continue to taste great.

Advertisement

About This Article

Summary of the ArticleX All you need to replace a water filter in a Kenmore refrigerator is a replacement that is compatible with the refrigerator’s model number. If the water filter is positioned on the interior of the refrigerator, it should be placed in one of the top two corners of the refrigerator. To remove it, just twist it in the opposite direction as the clock. Place the replacement filter into the compartment and twist it clockwise to ensure that it is securely fastened in place. Once the filter has been replaced, press and hold the “Filter Reset” button located near the water dispenser for three seconds to ensure that the system recognizes the change.

  1. Removing the filter is accomplished by turning the dial counterclockwise.
  2. Place the filter back into the grill in the refrigerator and tighten the lid with a clockwise rotation to keep it in place.
  3. Continue reading for additional information on how to replace a water filter in a Kenmore refrigerator, including what to deal with your old filter.
  4. The writers of this page have together authored a page that has been read 266,490 times.

Did this article help you?

Is it past time to change the water filter in your Kenmore refrigerator? Filterswell provides a variety of high-quality inline water filters from leading manufacturers to satisfy your filtration requirements. The use of water filters prevents impurities such as iron, chlorine, and rust from entering your drinking water supply. It is not only healthful but also beneficial to the environment to filter your water using a water filter. In order to achieve high-pressure purification, you need investigate what a reverse osmosis water filter is capable of accomplishing.

How to Change the Water Filter in a Sears Kenmore Refrigerator.

  • Unplugthefridgefromthewalloutlet
  • Spreadasmalltowelonthefloorinfrontofthefridgetocatchanywaterfrom
  • Grabthefilterhandleprotrudingthroughthegrillalongthebottomofthefridge
  • Pulltheoldfilterfromtherefrigerator. Slidethehandleoffthebackoftheoldfilter

Every drop water filters model:EDR1RXD1 water filters for kenmore refrigerators below the line of sight Kenmore 04609930000 (Kenmore 04609930000) Kenmore 10650029210 Water Filter (OEM) Kenmore 10650043710 Water Filter (OEM) Kenmore 10650029210 Water Filter (OEM) Kenmore 10650043710 Water Filter (OEM) Kenmore 10650029210 Water Filter (OEM) Kenmore 10650043710 Water Filter (OEM) Kenmore 10650043710 (OEM) A water filter from Kenmore, model number 10651123210.

(OEM) kenmore 10651123211 water filter Kenmore Water Filter (OEM) Kenmore 10651129212 Kenmore 10651129212 Filter for drinking water (OEM) Kenmore 10651132213 (Kenmore 10651132213) Filter for drinking water (OEM) Kenmore 10651133213 Water Filter (OEM) Kenmore 10651134210 Water Filter (OEM) Kenmore 10651133213 Water Filter (OEM) Kenmore 10651133213 Water Filter (OEM) Kenmore 10651133213 Water Filter (OEM) (OEM) Kenmore 10651759710 Water Filter is a Kenmore product (OEM) Kenmore 10651782410 (Kenmore 10651782410) Filter for drinking water (OEM) Kenmore 10651782412 (Kennedy) Filter for drinking water (OEM) Kenmore 46-9930 – Kenmore 46-9930 Filter for drinking water (OEM) Kenmore 9081 Water Filtration System (OEM) Kenmore 9930 Water Filtration System (OEM) Kenmore 9930P is a washing machine manufactured by Kenmore Corporation.

Filter for drinking water (OEM) Kenmore Elite model number 10641163310.

(OEM) Kenmore Elite 10651335710 Water Filter (Kenmore Elite 10651335710) (OEM) Kenmore Elite 10651339710 Water Filter (Kenmore Elite 10651339710) (OEM) Kenmore Elite 10651712411 Water Filter (Kenmore Elite 10651712411 Water Filter) (OEM) Kenmore Elite 10651713411 (Kenmore Elite) Filter for drinking water (OEM) Kenmore Elite 10651719413 Water Filter (Kenmore Elite 10651719413 Water Filter) (OEM) Kenmore Elite 10651723410 Water Filter (Kenmore Elite 10651723410 Water Filter) (OEM) Kenmore Elite 10651752710 Water Filter (Kenmore Elite 10651752710 Water Filter) (OEM) Kenmore Elite 10651753710 Water Filter (Kenmore Elite 10651753710 Water Filter) (OEM) Kenmore Elite 10651762510 (Kenmore Elite) Filter for drinking water (OEM) 10651762511 Water Filter for Kenmore Elite 10651762511 (OEM) 10651763510 Water Filter for Kenmore Elite 10651763510 (OEM) Kenmore Elite 10651769510 Water Filter (Kenmore Elite 10651769510) (OEM) Kenmore Elite 10651772510 Water Filter (Kenmore Elite 10651772510) (OEM) Kenmore Elite 10651783410 Water Filter (Kenmore Elite 10651783410) (OEM) Kenmore Elite 10651783412 Water Filter (OEM) Kenmore Elite 10651783413 Water Filter (OEM) Kenmore Elite 10651783414 Water Filter (OEM) Kenmore Elite 10651789410 Water Filter (Kenmore Elite 10651789410) (OEM) Kenmore Elite 10651789413 Water Filter (Kenmore Elite 10651789413 Water Filter) (OEM) 10651792410 Water Filter Kenmore Elite 10651792410 Water Filter (OEM) Kenmore Elite 10651792411 Water Filter (OEM) Kenmore Elite 10651792412 Water Filter (OEM) Kenmore Elite 10651793410 Water Filter (OEM) Kenmore Elite 10651793412 Water Filter (OEM) Kenmore Elite 10651793410 Water Filter (OEM) Kenmore Elite 10651793412 Water Filter (OEM) Kenmore Elite 10651799413 Water Filter (Kenmore Elite 10651799413 Water Filter) (OEM) Kenmore Elite 10673002511 Water Filter is a high-performance water filter (OEM) Kenmore P4RFKB2 Water Filter (OEM) Kenmore P8RFKB2L Water Filter Kenmore P4RFKB2L Water Filter (OEM) Kenmore W10394044 (W10394044) Kenmore W10743248 Water Filter (Original Equipment Manufacturer) (OEM)

See also:  Why The Water Heater Is Not Working

Kenmore Elite Refrigerator Water Filter

At the time of purchase, a $3.00 discount was applied. With the coupon, you may save $3.00. Sketch was used to create this design. Sponsored

ICEPURE ADQ36006101 Replacement for LG LT700P, Kenmore Elite 9690, ADQ36006102, RFC 1200A, 46-9690 469690, ADQ36006101-S, LFXS30766S, WSL-3, FML-3, Refrigerator Water and LT120F Fresh Air Filte,3Combo

Amazon’s Featured Product Products that are highly rated and reasonably priced

  1. Kenmore SubscribeSave allows you to save even more money. Get it as soon as Monday, March 14 for $9.43 shipping
  2. PURELINE GOLDEN ICEPURE is available as soon as Monday, March 14 for $9.80 delivery. At the time of purchase, a $3.00 discount was applied. With the coupon, you may save $3.00. Get it as soon as possible. Posted on Monday, March 14 for $9.93 shipping
  3. PUREPLUS At checkout, a ten percent discount is applied. With the voucher, you may save 10%. You may get it as soon as Monday, March 14 for $10.60 shipping.

At checkout, a ten percent discount is applied. With the voucher, you may save 10%. SubscribeSave allows you to save more money. SubscribeSave allows you to save money. A 5% discount is applied at the time of purchase. With the coupon, you may save 5 percent. Subscribe to save even more money. SubscribeSave members save $47.59 on their subscription. SubscribeSaveShips to the Netherlands allows you to save even more money. Order quickly as there are only 5 left in stock.

PUREPLUS 469690 LT700P Filter Replacement for LG Kenmore Elite 9690, ADQ36006102, ADQ36006101, LFXS30766S, LFX28968ST, LFX31925ST, LFX31945ST, RWF1052, LT120F, Refrigerator Water and Air Filter, 2Pack

A 5% discount is applied at the time of purchase. With the coupon, you may save 5 percent. Subscribe to save even more money. Save A 5% discount is applied at the time of purchase. With the coupon, you may save 5 percent. With the SubscribeSave discount, the price is $42.47.

PUREPLUS 469690 LT700P Replacement for LG Kenmore Elite 9690, ADQ36006102, ADQ36006101, LFXS30766S, LFX28968ST, LFX31925ST, LFX31945ST, RWF1052, LT120F, Refrigerator Water and Air Filter Combo, 3Pack

A 5% discount is applied at the time of purchase. With the coupon, you may save 5 percent. SponsoredSponsored This advertisement is being displayed to you because the product is relevant to your search query.

FilterLogic 5231JA2002A Refrigerator Water Filter, Replacement for LG® LT500P®, GEN11042FR-08, ADQ72910911, ADQ72910901, Kenmore 9890, 46-9890, LFX25974ST, LMX25964ST, LSC27925ST, 3 Filters

At checkout, a ten percent discount is applied. Brands that are connected to your search that you may save 10% with coupon

Water filters for Kenmore Elite refrigerators

Kenmore water filters for Kenmore Elite refrigerators have been approved by the National Sanitation Foundation (NSF) to eliminate chlorine taste and odor (NSF standard 42). The removal of lead and cysts (NSF standard 53) is another feature of many Kenmore Elite water filters, and some have passed further NSF certification tests and are certified to remove volatile organic compounds, medicines, and certain pesticides, among other contaminants (NSF standard 401). More information on NSF certification may be found here.

Alternatively, we may mail you a replacement Kenmore Pro water filter without you having to remember to do so.

Not sure which filter to use in your refrigerator?

Use ourRefrigerator Water Filter Finder to choose the right filter for your refrigerator.

Do I need to insert a water filter bypass plug in my refrigerator when I remove the water filter?

It is necessary to place a water filter bypass plug into the water filter housing of some refrigerators while removing the water filter to avoid water leaks. This is done to prevent water leaks. Some water filter systems are equipped with an automatic bypass, which prevents water from escaping when the filter is removed from the system and the water is used. When the water filter is removed from your refrigerator, check your owner’s handbook to discover if your refrigerator requires a bypass for the water filter.

Here are common water filter bypass devices for Kenmore Elite refrigerators.

Water filter 9130 is used by Kenmore Elite refrigerators with model numbers that begin with 111 or above (also known as 04609131000). 60199-0006802-00 is a replacement for the earlier filters 04609131000, 46-1173152-3, and 60199-0006802-00. Filter 9130 is compatible with the following Kenmore Elite refrigerator models: 11173315120, 11173332220, 11173312120, 11172699120, 11172692120, 11173319120, 11173335220, 11173339220, and 11172695120.

Kenmore Elite refrigerator models: 11173315120, 11173332220, 11173312120, 11172699120, 11172692120, 11172692120, 11

How do I find the replacement water filter for my Kenmore Elite fridge?

Enter the model number of your Kenmore Elite refrigerator into the search box at the top of the page, and the water filter for your refrigerator will appear in the parts list diagram at the bottom of the page. If you have a refrigerator owner’s handbook, you may also check for the part number for the new filter in it.

Here are the common Kenmore water filters used in Kenmore Elite refrigerators

  • It is compatible with some Kenmore Elite 795-series French door refrigerators. Kenmore refrigerator water filter 9690 (part number AGF80300801) Filter 9690 is a replacement for the LG water filter LT700P and can be found under the part numbers AGF80300801, ADQ36006101, ADQ36006102, ADQ36006106, ADQ36006114, and ADQ36006113. Filter 9690 is equivalent to the LG water filter LT700P and can be found under the part numbers AGF80300801, ADQ36006101, ADQ36006102, ADQ36006106, ADQ Kenmore filter 9690 is typically found in the top left corner of the refrigerator section
  • Kenmore refrigerator water filter 9083 is located in the bottom front grille of Kenmore Elite 106-series side-by-side refrigerators. Kenmore refrigerator water filter 9083 is typically found in the top left corner of the refrigerator section. The exterior end of filter 9083 is embellished with a beautiful cap. Alternatively, you may get a black filter replacement cap WP2260518B or a white filter replacement cap WP2260502W if the cap is missing or broken. Kenmore refrigerator water filter 9081 fits select Kenmore Elite side-by-side refrigerators and replaces Kenmore filters 9020, 9020B, 9030, 9030B, EDR3RXD1, 9920, 9953, 4396710, 4396711, 4396841, 4396842, 8212650, 4396710B, 4396841B, W10121145, W10121146, W10754687, and W10776411
  • Kenmore refrigerator Filter 9081 is positioned in the upper right corner of the refrigerator area, on the left side of the door. Filter 9081 is a replacement for the Whirlpool EveryDrop refrigerator water filter EDR1RXD1 (sold separately). In addition, Kenmore filter 9081 replaces the following current and prior water filter models: WHR1RXD1, 9900, 9981, FILTER1, W10217316, W10295370A, W10295370, W10295370B, W10569758, W10569760, W10569761, W10735398, WHR1RXV2P, 9930, W10394044, and W10743248
  • W10217316, W10295370A

Fridge Water Filter – Kenmore and LG Compatible (1 Pack)

High-end generic refrigerator water filters with ultimate filtering are manufactured by PURELINE. These filters are capable of reducing chlorine as well as particles, heavy metals, and big sediments. After your water has passed through our filters, all that is left is clean, delicious-tasting, and safe to drink water. With the PURELINE 9690 and LT700P replacement water filters, you can enjoy the clean, refreshing flavor of your water and ice. The 9690 and LT700P Replacement Water Filters from PURELINE are simple and straightforward to install.

LG and Kenmore 3-door, 4-door, Side-by-Side, and French Door refrigerators with the PURELINE 9690 and LT700P water filters were developed to be perfectly compatible with each other as well as the models listed below.

  • Triple Action Filtration: Pureline filters make use of advanced active coconut carbon blocks that remove contaminants from your drinking water in three stages: first, the impurities are removed, then the impurities are removed again. The water first passes through the pores of the filter, which reduces the amount of big particulates and metals present. Mechanical filtering is the term used to describe this process. The water is then further filtered via two independent steps of ionization filtering that take place when the water travels through the carbon block on its way to your refrigerator
  • And Pureline removes 99 percent of the chlorine, odor, and particles from your water, resulting in clean and great-tasting drinking water for your family. All that is left once your water has passed through our filters is clean, great-tasting, and safe water for drinking
  • Exceptional Filtration: Pureline carbon blocks have been independently evaluated for their ability to remove heavy metals, big sediments, and any other potentially harmful pollutants and toxins from your water. Premium Materials: Pureline filters are entirely constructed of lead-free, BPA-free, and food-grade materials, as evidenced by our NSF 372 Certification. Certification: Pureline filters have been tested and certified by the National Sanitation Foundation, the World Quality Association, and the International Association of Pest Management Organizations. Filters built to the same designs and specifications of the original brand name filter to ensure easy installation and flawless compatibility
  • There is no leakage and the filters are 100 percent compatible. The following Kenmore filter models are compatible: 9690, 46-9690-9690, Kenmoreclear 9690, Kenmore Elite 9690
  • The Pureline filters employ advanced active coconut carbon blocks that remove contaminants from your drinking water in three stages: first, the impurities are removed from your drinking water, and then the impurities are removed from your drinking water again. First, the water passes through the pores of the filter, which reduces the amount of big sediments and metals present in the water stream. Mechano-filtering is the term used to describe this process. The water is then further filtered through two independent phases of ionization filtration that take place when the water travels through the carbon block on its way to your refrigerator. Pureline removes 99 percent of the chlorine, odor, and particles from your water, resulting in clean and great-tasting drinking water for you. You are left with clean, delicious-tasting, and safe water to drink once your water has passed through our filters. Exceptional Filtration: Pureline carbon blocks have been independently evaluated for their ability to remove heavy metals, big sediments, and any other potentially hazardous impurities and pollutants from your water. Premium Materials: Pureline filters are totally constructed of lead-free, BPA-free, and food-grade materials, as demonstrated by our NSF 372 Certification. Testing and certification: Pureline filters have been tested and certified by the National Sanitation Foundation, the World Quality Association, and the International Association of Pest Management Organizations. Filters built to the same designs and specifications of the original brand name filter to ensure easy installation and full compatibility
  • There is no leakage and the filters are completely interchangeable. The following Kenmore filter models are compatible: 9690, 46-9690-9690, Kenmoreclear 9690, Kenmore Elite 9690.
See also:  Which Is The Best Water Filter Pitcher

Compatible LG Water Filter Models: LT700P, LT700PC, ADQ36006101, ADQ36006101-S, ADQ36006101S, ADQ36006102, ADQ36006102-S, ADQ36006102S, ADQ36006102-S, ADQ36006102S, ADQ36006102-S, ADQ36006102S, ADQ36006102-S, ADQ36006102S, ADQ36006102-S, Kenmore Water Filter Models 9690, 469690, 46-9690 that are compatible Models of Refrigerators that are compatible The following are examples of LFCS31626S: LFD20786SB; LFD22786SB; LFX21976ST; LFX25976SB; LFX25978SB; LFX25991ST; LFX25992ST; LFX28968D; LFX28995ST; LFX29927SB; LFX29937ST; LFX29945ST; LFX3 The minimum working temperature is 0.6 degrees Celsius / 33 degrees Fahrenheit.

  1. 32 degrees Celsius/100 degree Fahrenheit maximum working temperature 207 kPa / 30 psi is the operating pressure in inches.
  2. 1,137 liters / 300 gallons is the maximum capacity.
  3. Compared to regular carbon blocks, advanced carbon blocks are more expensive.
  4. Mechanical filtration is the only way of filtering pollutants used by these filters, and it is the only method used by these filters.
  5. PURELINE and the original equipment manufacturer (OEM) employ sophisticated carbon blocks.
  6. Mechanical filtration is the most common approach.

Activated coconut is used in the production of advanced carbon blocks, which allows the carbon block to produce a positive ion charge that attracts and pulls contaminants out of water via their negative ions. Physical adsorption is used to remove any leftover contaminants.

Kenmore Appliances for Kitchen, Laundry & Home

SIX ADDITIONAL REASONS TO APPRECIATE YOUR NEW KENMORE APPLIANCE Read on to find out more THERE ARE THINGS THAT HAPPEN. MAKE A PLAN FOR IT. Take pleasure in the peace of mind that comes from knowing that your strategy will deliver on its promises.

Warranty Information

WARRANTY STATEMENTS FROM KENMORE On December 23, 2020, the document was revised. NOTE: In order to be eligible for appliance warranty coverage, you must produce evidence of purchase from Sears, Kmart, or another Transfor store.

Accessories Finder

When Is It Time to Replace Your Water Filter? Look for a replacement that is compatible with your refrigerator model. Unfortunately, the model number you entered did not match any existing models. Try inputting your model year (for example, 2000).

Kenmore EnergyGuide Specification

Specifications for the Kenmore EnergyGuide This page is designed to allow customers to search for and download suitable EnergyGuide resources from the United States Government. These resources are available for you to use.

Kenmore Elite® Smart Room Air Conditioner

Technical Specifications for the Kenmore EnergyGuide Users of this page can search for and download appropriate EnergyGuide materials from the United States Government. It is possible to obtain these materials.

Kenmore Pro

Take a look at the display of ranges and wall ovens and cooktops and refrigerators and dishwashers and microwaves and hoods and warming drawers, as well as ovens that truly know what a frittata is. Our Kenmore PRO front-control has a digital display.

History

Take a look at the display of ranges and wall ovens and cooktops and refrigerators and dishwashers and microwaves and hoods and warming drawers, as well as ovens that understand what a frittata is. Kenmore PRO front-control with a touch screen.

Features Refrigeration CleanFlow

Take a look at the display of ranges and wall ovens and cooktops and refrigerators and dishwashers and microwaves and hoods and warming drawers, as well as ovens that know what a frittata is. Our Kenmore PRO front-control has a touch screen.

test banner

Here are two additional reasons to choose Kenmore®: “Highest in Customer Satisfaction with French Door Refrigerators and Clothes Dryers” by J.D. Power shop dryers shop french door ref. Kenmore® “Highest in Customer Satisfaction with French Door Refrigerators and Clothe Dryers” by J.D. Power

Black Stainless Steel

Listed below are two additional reasons to choose Kenmore®: “Highest in Customer Satisfaction with French Door Refrigerators and Clothes Dryers” according to a J.D. Power survey; and “Highest in Customer Satisfaction with French Door Refrigerators and Clothe Dryers” according to an independent survey

Features Dishwashers MicroClean

Listed below are two more reasons to choose Kenmore®: “Highest in Customer Satisfaction with French Door Refrigerators and Clothes Dryers” according to the J.D. Power and Associates survey shop dryers shop french door ref.

DIY: How to Change a Refrigerator Water Filter

Step 1: Discard the Outdated Cartridge. Water filter cartridge cap is located in the front base grille, below the freezer compartment door, on the left side of the refrigerator. Exit via the base grille after rotating the cap counterclockwise to a vertical position. Remove the cap and filter cartridge from the filter cartridge housing. In the cartridge, there will be some water. It is possible that some spillage will occur. By slipping the cartridge cap off the end of the old cartridge, you can get it out of the way.

  1. Please do not throw away the cap.
  2. Replace the cartridge cap on the fresh cartridge with the help of a screwdriver.
  3. Rotate the cartridge cap in a clockwise direction until it is horizontal.
  4. Continue to put water through the refrigerator’s water dispenser until it consistently runs clean and clear consistently.
  5. The water will clean the system and eliminate any air pockets that may have formed in the lines.

If air pockets are present, you will see small bursts of air coming from the water dispenser when the water is turned on. It is possible that more flushing will be necessary. Step 4: Determine when it is necessary to replace your filter again.

  • Base grille indicators are available on models with base grille indicator lights. A water filter status light is situated at the top of the refrigerator compartment and will alert you when it is time to replace your water filter cartridge in the future. When the light is about to be changed, the color of the light will shift from green to yellow (when approximately 90 percent of the filter life has been used). Be prepared to change the filter when the light goes yellow
  • However, you do not necessarily need to replace the filter until the indicator turns red or if water flow has been considerably reduced before doing so. After changing the water filter cartridge, press and hold theRESET button for 2-5 seconds to bring the water filter status light back to normal operation. Whenever the system is rebooted, the status light will change from red to green.
  • Models without water filter status indicators – If your refrigerator does not have a water filter status indication, you should plan to replace the water filter cartridge every 6 to 9 months, depending on how much water you consume. Water filter cartridges should be replaced at least once every six months if the water flow to the water dispenser or ice maker considerably drops before six months have passed.

Note: Do not use with water that is microbiologically dangerous or of uncertain quality unless it has received proper disinfection before or after it has passed through the filter system. It is permissible to utilize cyst reduction systems that have been approved for use on disinfected waters that may include filterable cysts.

Kenmore ELITE W10215709A – Manual (Page 13)

To lock the dispenser, press and hold the LOCK button for three seconds. To unlock the dispenser, press and hold the LOCK button a second time. When the dispenser is locked, a message appears on the display screen. In the filter, there will be water present. It is possible that some spillage will occur. six-locked, one-unlocked UNLOCKED LOCKED LOCKED Water filter status lights will assist you in determining when it is necessary to replace your current water filter. This indicates that it is about time to replace the water filter cartridge when the water filter status display changes from “GOOD” to “ORDER.” When the water filter status indicator switches to “REPLACE,” it is time to replace the water filter cartridge.

Depending on the quality of your water and how much you use it, you should replace your filter at least once every six months.

INDICATOR: CURRENT STATUS:NEW or GOOD (green) A new filter has been fitted.

Water filter should be replaced.

When the system is rebooted, the status light will change from Replace (red) to New/Good (green), and vice versa.

ORDER mm REPLACE ORDER mm It is not recommended to use with water that is microbiologically dangerous or of unknown quality without first disinfecting the water before and after the filter system.

Changing the Filter for the Water The water filter is positioned in the base grille below the freezer compartment door, on the left side of the refrigerator.

Pulling straight out on the filter cap after hitting the eject button will allow you to easily remove the filter.

If this occurs, remove the cap and pull the filter straight out of the filter housing.

B.

B.

B A.

B.

IMPORTANT: Do not toss the cap away.

Keep the cap in case you need to use it with a replacement filter.

A B is an abbreviation for A B is an abbreviation for A.

The O-ring 4.Reattach the cover to the replacement filter (which was removed in Step 2).

Continue to turn the cap counter-clockwise until it snaps into place.

A.

Arrow on filter C.

Eject button B Insert the new filter into the opening in the base grille by pushing it in from the side.

When the filter is fully engaged, the ejectbutton will pop back out of the way. Gently pull on the cap to ensure that the filter is firmly in place before using. Ensure that the water system is flushed. See “Flushing the Water System After Changing the Filter” for further information. 13

Leave a Reply

Your email address will not be published.