Where Is The Water Heater Bypass Valve On A Rv

Where Is the Water Heater Bypass Valve On An RV?

Are you a new or beginning RVer who is curious about where the water heater bypass valve is located on an RV? You might be embarrassed that you don’t know where the bypass valve is, but be assured that you are not alone in this! It’s likely that your RV’s water heater bypass valve is tucked away somewhere in the interior of your RV. Today, we’ll assist you in locating it. Once we’ve assisted you in locating your RV water heater valve, we’ve compiled a collection of videos to demonstrate how to utilize your bypass valve in order to prepare your RV plumbing system for the winter.

Let’s get started!

Thank you very much!

Where Is the Bypass Valve In the RV Water Heater?

You’ll find the access panel for your RV water heater on the outside of your vehicle. Your RV water heater is normally housed in a square or rectangular compartment with a pull-down panel for easy access to the water heater. You will be able to get access to the front of your RV water heater from the exterior of your vehicle. Please note that this is NOT where your RV water heater bypass valve is situated! The bypass valve for your RV water heater is positioned at the rear of your water heater — on the inside of your RV.

  1. When it comes to flushing out your RV hot water heater for the winter, this is where you’ll be doing the brunt of the heavy lifting.
  2. Rather of being visible on the outside of your RV, the rear of your water heater will most likely be hidden behind your kitchen stovetop (or other appliance).
  3. As soon as you remove the paneling, you will be able to view the rear of your RV water heater – and you will be able to identify the bypass valve for your RV water heater.
  4. Remove a drawer or an adjacent panel if necessary in order to gain access to the back of your RV water heater’s cabinet.

Why Do I Need A Water Heater Bypass Valve In My RV?

The primary function of the water heater bypass valve is to prevent anti-freeze from entering the heater tank during the winterization of your RV’s water systems. It is not necessary to use anti-freeze in your RV hot water heater throughout the winterization process, both in terms of practicality and financial savings. This means that there is no danger of the tank freezing or expanding and causing harm to your water heating system. THE RV COMMUNITY IS MORE DIVERSE NOW THAN IT HAS EVER BEEN STAND BY THE SIDE OF YOUR FRIENDS AND SHOW YOUR SUPPORT FOR LGBT PRIDE MONTH!

The majority of recreational vehicles are equipped with a water heater bypass valve.

Bypassing your RV’s water heater is a more efficient and cost-effective method of winterizing your whole system.

Descale, clean, and drain your hot water system instead of putting anti-freeze in it to ensure that it is properly maintained for the winter months ahead of time We recommend that you clean and empty your RV hot water tank at least once a year in order to eliminate any limescale and other buildup that may have accumulated and may be affecting the function of your heater.

Winterizing Your RV PlumbingCleaning Your RV Water Heater

The primary function of the water heater bypass valve is to prevent antifreeze from entering the heater tank during the winterization of your RV’s water systems. It is not necessary to use anti-freeze in your RV hot water heater during the winterization process, both in terms of practicality and financial consideration. As a result, there is no danger of the tank freezing or expanding, causing harm to your water heating system. MORE PEOPLE THAN EVER BECOME PART OF THE RV COMMUNITY STAND BY THE SIDE OF YOUR FRIENDS AND SHOW YOUR SUPPORT FOR LGBT PRIDE MONTH.

There is a bypass valve built in most recreational vehicles.

When it comes to winterizing your RV, bypassing your water heater is a faster and more cost-effective method of doing so.

Descale, clean, and drain your hot water system instead of putting anti-freeze in it to ensure that it is properly prepared for the winter months ahead.

Conclusion

The information provided should assist you in finding the water heater bypass valve on an RV. Don’t be discouraged if you can’t locate it right away; you are most certainly not alone. Getting started with RVing is all about learning, and you’ll be an expert before you know it, teaching other newbies about your favorite tips and tricks! If you have any questions or comments on the placement of the RV water heater bypass valve, we’d appreciate it if you posted them in the comments section below.

Traveling is simple.

RV Hot Water Heater Bypass Valve and Drain Valve

The most frustrating type of repair is the one that might have been avoided. When it comes to winterizing your RV, be thorough. No anti-freeze should be used in the hot water heater, fresh water holding tank, grey and black water tanks since they are all drainable and large enough to expand and contract without causing any damage. It is common for the water lines in an RV to be quite narrow and have little capacity to grow. They require anti-freeze for RVs. The cold water enters the RV water heater through a water pipe located at the bottom of the unit.

If there is an intermediate pipe that joins these two lines, you have just discovered the RV’s bypass valve, which is a great accomplishment.

If, for some reason, anti-freeze gets into the heater, you’ll have to clean it out entirely before you can store any more water for bathing and other activities.

This bypass is present in the majority of recreational vehicles. Some recreational vehicles (RVs) are equipped with one, two, or three bypass valves.

  • Three-valve systemMake sure that the valves on the cold and hot water lines are turned so that they are perpendicular to the water line. Turn the bypass valve so that it is parallel to the line and the line is no longer blocked. In order to avoid the tanks, the anti-freeze will now be sent straight through the line. System with two valves Adjust the position of both valves so that they are parallel to the line. By doing so, the water will be able to bypass the heater.
  • System with a single valve. To bypass the hot water tank on a one-valve system, just turn the valve such that it is perpendicular to the line.

Before you pour anti-freeze into the system, you should also bypass or remove the filter if it is there. For a novice RV owner, the winterization process might be a confusing procedure to navigate. Although it varies significantly based on the model of the vehicle, many characteristics are common to all recreational vehicles. The bypassing of the water heater is one such procedure. RV bypass valve for the hot water heater Some water heaters are sent with a bypass valve already fitted, which makes life a whole lot easier.

  • Look for your heater. You will find it on the outside of your vehicle, and it will most likely be hidden under a huge cover with a screen on the top right-hand side
  • Activate the screen. Behind it, you’ll discover an anode, which is normally removed when the tank is drained in preparation for winterizing. The anode becomes loose as it ages, so replace it as soon as it begins to show signs of wear. To accommodate the anode rod, you’ll need a 1- 1/16-inch socket. Navigate to the interior of your vehicle to find and turn on the heating. It’s possible that you’ll have to remove a cover in order to get to it. Cold water enters at the bottom of the heater and hot water exits through the top of the heater. If your RV is equipped with a bypass valve, these two pipes will be connected directly to one another by means of a third pipe. In order for water to flow in the desired direction, the valve’s lever should be pointing in that direction. Turning it 90 degrees towards the bypass line will result in the water flowing into the bypass line rather than into the tank. Anti-freeze should not be allowed to enter the hot water tank until both the hot and cold water lines are switched off. If your heater has a fuse, you can remove it to prevent it from turning on while there is no water in it.

Winterizing entails more than merely turning off the hot water supply for the season. Install a bypass valve if your RV does not already have one in order to simplify winterization. Check valve for the hot water heater in the RV The check valve line is the point at which the RV and the municipal water first come into contact. This also necessitates the use of antifreeze. Before adding the anti-freeze, be sure that your water pump is turned off. Remove the screen that is attached to the water hook-up and put it somewhere safe.

Continue to press on the valve until all of the water in it drains out and anti-freeze begins to drip out.

Remember, if anything appears to be too complex to do, it probably is.

Thank you for reading, and please don’t forget to leave a comment!

Forest River Water Heater Bypass: Where Is The Bypass Valve?

The game of hide and seek appears to be the most popular among RV makers. That is where they conceal the critical components, and you will have to spend hours searching for them. What makes the game even worse is that the company and the owner’s manual do not always inform you where the various components are located in the game. What is the location of the water heater bypass valve? The bypass valve for your water heater may be situated under your stove in certain models. To get to it, you must first remove the panel by unscrewing the screws holding it in place.

Accessing vital components in recreational vehicles might be difficult at times, but keep reading our post since it contains some important pieces of information that will make your search simpler and faster.

Bypassing the RV Water Heater (No.

How does a Hot Water Bypass Valve Work?

This valve functions in the same way as any other valve that handles water or other liquids. It must be rotated in such a way that water may travel through it without entering the water heater itself. Alternatively, it must be closed in order for the water heater to work normally. In some models, the bypass valve is located immediately next to the water heater, while others are located behind it or outside the unit, where you must reach the bypass valve through an access panel in order to operate it.

When you have this valve open, you must also close the cold and hot water valves on your plumbing system.

Then you don’t have to rely on this valve all of the time.

Using the valve, you may drain the tank and store your RV for the winter. To re-use your RV, you just flush away the anti-freeze first, then close the bypass valve and open the other two valves so that you can have hot water once again from the system.

Why Bypass the RV Water Heater?

The solution to this question is straightforward and straightforward. Water expands as it freezes, as you may be aware. The water in your water heater will freeze and expand if it is not properly insulated throughout the winter. If you do not remove the water from your water heater and it is not properly insulated, it will harm the device. It prevents water from entering the heater, allowing you to empty it and preserve the component from any potential harm that might occur. When ice forms in the water heater, the valve helps to redirect the water supply while also ensuring that all components of the water heater are protected from harm.

There are so many of these extra activities that you must complete that you would not typically have to complete with a residential water heater or other components.

See also:  Where Should A Whole House Water Filter Be Installed

As a result, you will not neglect or ignore any of the important components that require specific attention, such as the water heater.

Where is the Water Heater Bypass Valve on an RV?

That is an excellent question. Every manufacturer has a specific location in mind for these valves, and they are not universally applicable. The location of an RV is entirely up to the discretion of the particular RV manufacturer, who has a plethora of options for hiding them. Then don’t anticipate to discover those valves in the same spot as you would have found them in a prior model you may have purchased. Because of advancements in RV production, it is possible that subsequent models may be manufactured in other regions.

  • One piece of advice: check your owner’s handbook to see whether the firm has already provided you with the location information.
  • When it comes to this issue, the second most important question is how to get access to them.
  • That means you’ll have to crawl down on your hands and knees and remove the screws before removing the panel itself.
  • Other variants may necessitate the removal of two drawers adjacent to the stove in order to get access.
  • If you’re lucky, the valves may be located outside, near other controls, making access to them a breeze.
  • In order to access those valves, one individual recommended knowing how to crawl beneath your RV, having long arms, and having enough of light available.

The position of the valves will be determined mostly by the size of your recreational vehicle. Its overall design, as well as the number of built-in functions. Access, on the other hand, is a whole other situation.

Forest River Water Heater Bypass

This is a difficult question to answer since the response is “it depends.” Forest River RV models and floor designs are available in a variety of configurations. Despite the fact that they are all manufactured by the same manufacturer, the specific position may vary across models. Those valves may be situated near the rear of the water heater in one configuration. It would be necessary to go down on your hands and knees. Then take off any panels or drawers and use your hands to navigate your way around.

  • In other Forest River vehicles, the valves are located on a manifold that can be accessed from the exterior of the vehicle.
  • You may also be the victim of a nasty trick that is perpetrated on you.
  • It is possible to spend hours searching for something that is not there.
  • RV manufacturers put their clients through a fantastic game in order to gain their business.
  • The enterprises have just a little amount of available space to operate with.

RV hot Water Heater Valve Position

This is not often a difficult situation to cope with. When it comes to the location of the bypass valve on the waterline, it should be placed prior to the water heater as shown. The issue is, what factors do RV manufacturers take into consideration when installing a water heater? This might be in front of the unit, behind the unit, or outside of the RV unit. The annoying part is that you may have to take off doors, drawers, and panels before you discover the appropriate one for your needs. When you’re finished, make a note of where you put it so you can find it more quickly the next time you need to use the bypass valve.

The valve may be of the push-button variety, in which case you must press in to engage it and then push again to disconnect it from the system.

It is closed if it is perpendicular to the line, whereas it is open if it is parallel to the line.

There are other models of Forest River, as well as other models, that you may examine to see what they did in your situation.

How do you Get a Water Heater out of Bypass Mode?

The work is straightforward and straightforward to do. Your 5-year-old should be able to do the task with little difficulty. The first step would be to close the bypass valve, which would prevent water from flowing around the waterheater in the meantime. Next, open the cold water valve that has been closed and allow the water to begin filling the heater as it has been closed. While the water is doing its thing, turn on the hot water valve to conserve energy. When the cold water has finished heating, it can be used in your shower or faucets without being restricted.

Occasionally, the bypass valve is located on the cold water line, where it connects to the bypass hose, but this is not always the case.

It has two valves, one at the cold water inlet spot and another at the bypass line, which are connected together.

It is, once again, really simple to complete. You turn the appropriate valve or valves to close the system while simultaneously re-opening the regular function of your hot water heater.

How to Bypass RV Water Pump

To avoid being overly simplistic, the most effective approach to bypass your water pump is to get a water pump bypass kit. These kits are intended to provide you with the hoses and valves you need to skirt around your water pump when the situation calls for it. The hazard of utilizing these kits is that many of them come with plastic valves, which can cause serious injury or death. While it may be less expensive to purchase and faster to install, it is also a highly ineffective method of bypassing your water pump.

Consider purchasing one of the kits that includes brass fittings, if possible.

The majority of businesses that sell RV parts and accessories will have these kits available for purchase.

Consult with your dealer or a reputable mechanic to determine the best course of action to take in this situation.

How to Bypass RV Water Filter

It is critical that a bypass system be installed in conjunction with this component. What the bypass will do is prevent any anti-freeze from accessing this area of the system that you may have pumped through your RV for winter storage. What we’ve discovered are what are referred to as bypass plates. These are simple to install and prevent the flow of anti-freeze, ensuring that the liquid travels in the direction you wish. According to the manufacturer, these plates are constructed of stainless steel and should last you a lifetime if properly cared for.

A gasket has been supplied to ensure a more secure fit.

You will only need to delete it when you wish to utilize the filter, which is rarely.

Simply said, that’s all there is to it.

How to Install RV Water Heater Bypass Kit

That is something you should take into consideration. In the event that your RV’s water heater does not have a bypass system, you should consider installing one. They can save you a lot of money on anti-freeze because it will take more gallons of the product to fill your water heater than it does with regular anti-freeze. Then you won’t have to spend money on replacing any burst or broken water pipes, or even on replacing the tank itself. If your RV does not already have a bypass system, here are two extremely compelling arguments in favor of having one installed.

  1. Fortunately, you will not be dealing with any power in this location.
  2. Following the purchase of the appropriate bypass kit, the following actions must be completed: Disconnect all of the current water lines and fittings from the water heater.
  3. Do not forget to indicate which line is cold and which line is hot on the diagram.
  4. Using Teflon tape, secure the male end of the fittings to the fittings’ female end.
  5. 3.
  6. Valve installation is straightforward, and you should make certain that the screws are tightened down sufficiently.
  7. As soon as you are finished, check to see that the bypass male ends on both valves are facing in the same direction.
  8. There is no need to use Teflon tape on the male bypass ends of the bypass cable.
  9. To properly tighten, simply crank the nut one half turn past finger tight.
  10. Reinstall the old water heater fittings and link the water lines to the water heater.
  11. When it’s time to winterize, simply shut off the valves and open the bypass valve, and you’ll have saved money.

Even though these should be universally applicable, be prepared in the event that they are not. These bypass kits should be available for purchase anywhere plumbing supplies are sold, as well as at RV accessory retailers in your area. Prices should be compared for the best deal.

Some Final Words

Owning and touring in an RV may be a great deal of enjoyment. You get to go to areas you’ve always wanted to see while saving money by not having to pay for hotel accommodations. Those same joys, on the other hand, can cause a great deal of frustration. The hassles might arise while trying to locate critical components when storing or using your recreational vehicle. The water heater bypass system is an example of this. Although it is a straightforward system, it may prove to be the most difficult component to locate.

Understanding RV Water Heater By-pass Systems

In this piece, I intended to assist RV owners in learning everything they needed to know about RV water heater bypass systems in order to make the best decision possible. Water heater bypass systems are already standard equipment on the majority of recreational vehicles sold today. In order to keep the water heater from interfering with the RV’s plumbing system, it is necessary to install a bypass system. Water heater draining and RV water system winterization may both be accomplished through the use of the bypass system.

  • That occurs because the water heater is bypassed in this situation Typically, the bypass system would be used when the RV is winterized with an anti-freeze that has been certified for use in RVs.
  • Using the water system without the water heater allows you to save the expense of filling the water heater tank with six or more gallons of RV antifreeze in order to winterize the system.
  • Are there any differences between the several types of RV water heater by-pass systems?
  • Manual valve operation is available in types 1, 23, and 24.
  • During the installation of two 2-valve systems, one valve is situated at the cold-water input and the second valve is located in the by-pass plumbing line.
  • The correct operation of each bypass system includes the following elements: The valve at the cold-water supply line should be rotated 90 degrees to the direction of the supply line in a one-valve arrangement.
  • Please keep in mind that certain bypass valves are operated by knobs rather than handles.

To bypass water from a two-valve system, turn the valves placed on the cold-water intake and hot-water output such that the handle is in direct contact with the by-pass pipe.

Please keep in mind that certain bypass valves are operated by knobs rather than handles.

The manual valves located on the cold-water inlet and hot-water outlet of a 3-valve system should be turned, just as they would be on a 2-valve system.

Please keep in mind that certain bypass valves have knobs rather than handles.

You can drain any remaining water from the tank while the valves are in these settings.

Remove pressure from the system by opening a hot water faucet and allowing the water to cool before draining.

The following are the symptoms of incorrectly positioned bypass valves: It appears that the water heater is not supplying enough hot water to the house.

Observe to check whether the by-pass valves are in the appropriate position if you are experiencing any of the symptoms listed above.

A tank that is not completely filled with water might cause harm to the water heater controls.

If it is completely full, water will flow through the valve.

If you want to learn more about RV water heater bypass systems, have a look at this video we created for Suburban water heaters.

Good luck with your camping trip.

He has a blog at markpolk.com.

See also:  How Does A Gas Hot Water Heater Work

Introducing the RV 101® Travel Trailer Ultimate Video.

E-book Travel Trailer5th Wheel TrailerBundleTravel Trailer Training Course on RV Orientation through Video Video Training Course on How to Tow Your Travel Trailer Like a Pro Tow your 5th wheel like a pro with these tips.

RV DIY® Online Video TrainingRV EssentialsRV DIY® Online Video Training A Video-Based Training Program Video Training Course on Winterizing and Storing Your Recreational Vehicle Plus, a free RV Checklist booklet with the Travel Trailer 4 video bargain set Video Bargain Set for the 5th Wheel 4 with a Free RV Checklist booklet Motorhome 4 Video Bargain Set with a Free RV Checklist booklet is available for purchase.

-– An assemblage of RV Education 101 E-Books – a nine-volume RV E-BOOK BUNDLE SET An Introduction to Recreational Vehicles Training Course in the Form of an E-book Purchasing an RV: An Insider’s Guide Training Course in the Form of a Book Owning and operating a recreational vehicle (RV) Training Course in the Form of a Book RV Checklists: The Original Checklists for RVers Training Course in the Form of a Book RV Campground Fundamentals Training Course in the Form of a Book RV Safety Considerations and Recommendations Tricks Training Course in the Form of an E-book RV Maintenance and Repair Training Course in the Form of a Book Preparing and Storing Your RV for the Winter Training Course in the Form of a Book RV Battery Maintenance and Care Training Course in the Form of a Book The Fundamentals of Trailer Towing Training Course in the Form of a Book

Don’t Bypass Important RV Water Heater Steps

Take a look at the Privacy Notice.

Privacy Notice

It is possible that the dealership will collect information about you in connection with your transaction as indicated in this notice. 1. We obtain nonpublic personal information about you from the sources listed below: In addition to the information we obtain from you on applications or other forms, we also get information about your transactions with us, our affiliates, or others, as well as information from consumer reporting agencies (e.g., credit bureau). 2. We may release all of the information we collect, as indicated above, to organizations that perform marketing services on our behalf, as well as to financial institutions with which we have joint marketing agreements, such as credit card companies.

  • If you are a customer or a former customer, we may also release nonpublic personal information about you to nonaffiliated third parties if this is authorized by law.
  • 5.
  • This application is submitted on the understanding that all information provided is true, accurate, and complete to the best of your knowledge and understanding.
  • Please keep in mind that credit is provided based on factors such as credit ratings, payment history, assets, and other factors, and that the decision is made by the bank, not us.
  • You acknowledge that you are responsible for any fees associated with your loan.
  • Your electronic signature acknowledges that you have read and understood our rules, terms, and conditions, and that you have given us permission to begin processing your loan.

Where is bypass valve – Winnebago Owners Online Community

06-22-2020, 09:08 PM 1
Winnebago WatcherJoin Date: Jun 2020Posts: 3 Where is bypass valve


Hi all, we just puchased a micro mini 2106fbs year 2016, the previous owners winterized it and we are trying to de winterized it. Followed all the steps, filled water tank, turned on pump and opened faucets, nothing. Pump is pumping but not stopping and not pumping water.was told it was probably bypassed and that bypass is on hot water tank? Well I can’t open the door to water tank as it is a flat screw that just turns and turns.,I’m at a loss! Please help! Thanks in advance

06-22-2020, 09:21 PM 2
Winnebago MasterJoin Date: Jul 2000Posts: 635 even if bypass valve is ON you should still get flow out of the faucets.that’s how the lines are winterized.by all means get that door open but by your description it sounds like your fresh water valve is still in the FILL position. you may have neglected to switch it back to ON or CITY after you filled the tank._’73,rich, n9dko2016 Itasca Suncruiser 38Q
06-22-2020, 09:26 PM 3
Winnebago WatcherJoin Date: Jun 2020Posts: 3 Where is the ON or CITY water switch located?
06-22-2020, 10:17 PM 4
Winnebago MasterJoin Date: Jul 2000Posts: 635 should be in the wet bay. you must/should have seen it when you filled your fresh water tank._’73,rich, n9dko2016 Itasca Suncruiser 38Q
06-23-2020, 09:19 AM 5
Winnebago MasterJoin Date: Jan 2020Posts: 1,354 Not sure how your model is different than the 2106DS, but on that there are two places you would need to look.The first would be in the bathroom area, removing a front panel on the cabinet to get at the water heater bypass valves.The second would be removing the bottom panel (that you set pots on, etc.) inside the cabinet under the kitchen sink.There will be a valve there for letting the pump suck in fluid from an antifreeze bottle.My guess would be that that valve was left open?If so the pump would likely just be pumping air. Not sure if there are other valves there too-I just don’t remember._2019 2106 DS2019 Colorado Duramax
06-23-2020, 10:46 AM 6
Winnebago OwnerJoin Date: Jul 2011Posts: 65 _Dave and Holly2011 Winnebago Sightseer 33c with a 2011 Honda CRV behind.
06-28-2020, 09:58 PM 7
Winnebago OwnerJoin Date: Apr 2017Location: South Central, PennsylvaniaPosts: 206Blog Entries:1 Quote:Originally Posted byAlykat7Hi all, we just puchased a micro mini 2106fbs year 2016, the previous owners winterized it and we are trying to de winterized it. Followed all the steps, filled water tank, turned on pump and opened faucets, nothing. Pump is pumping but not stopping and not pumping water.was told it was probably bypassed and that bypass is on hot water tank? Well I can’t open the door to water tank as it is a flat screw that just turns and turns.,I’m at a loss! Please help! Thanks in advanceOpen the cabinet door below the kitchen sink and remove the false floor.There should be two screws holding the false floor in place, one in the middle at the back and one in the middle at the front. When you remove the false bottom, you will find the water pump.It sounds like you have a winterizing kit installed at the pump. There will probably be a “T” on the intake side of the water pump.One side of the “T” will be connected to the water line that goes to the fresh water tank below the floor and probably has a 1/4 turn valve in-line, this valve needs to be open, from your description it is probably closed. The other side of the “T” will be connected to another line that is used to winterize the camper.This line will not be connected to anything on the other end and will also have a valve, this valve needs to be closed if it isn’t already.Opening the valve to the fresh water tank and making sure the valve on the winterizing line is closed should solve your issue.As for the water heater, you said you have a 2016 2106FBS, that should have an Atwood On-Demand tankless water heater, there is no bypass on that water heater._2016 Winnebago Micro Minnie 2106DS, 200Ah BB, 400w rooftop solar, Renogy 2000w inverter2020 Tundra SR5 DLCB TRD Off Road, 5.7L V8 w/6.5′ bed38 gal. tankBlue Ox Sway Pro w/750bars, wired RVS rear view camera, Renogy 20A DC/DC charger
06-28-2020, 11:32 PM 8
Winnebago OwnerJoin Date: May 2018Posts: 55 Quote:Originally Posted byAlykat7Hi all, we just puchased a micro mini 2106fbs year 2016, the previous owners winterized it and we are trying to de winterized it. Followed all the steps, filled water tank, turned on pump and opened faucets, nothing. Pump is pumping but not stopping and not pumping water.was told it was probably bypassed and that bypass is on hot water tank? Well I can’t open the door to water tank as it is a flat screw that just turns and turns.,I’m at a loss! Please help! Thanks in advanceYour hot water tank is located under your bathroom sink, you can access it from either above the tank or from the side of the tank.As indicated, check your water pump, under your kitchen sink, make sure the pump is not set for adding anitfreeze still.

Attached Thumbnails

Click image for larger versionName: siphon hose 1.jpg Views: 45 Size: 1.03 MB ID: 174085

Currently Active Users Viewing This Thread: 1(0 members and 1 guests)
Posting Rules
Youmay notpost new threadsYoumay notpost repliesYoumay notpost attachmentsYoumay notedit your posts


BB codeisOnSmiliesareOncode isOnHTML code isOffTrackbacksareOff PingbacksareOff RefbacksareOff


Forum Rules

Similar Threads
Thread Thread Starter Forum Replies Last Post
2018 VISTA 27PE HW Bypass Valve jcr5353 Plumbing | Systems and Fixtures 11 03-28-201905:36 PM
2008 Navion Water Heater Bypass Valve Photo BCjetta General Maintenance and Repair 0 06-08-201809:39 PM
Water heater bypass valve? PAVIN Plumbing | Systems and Fixtures 8 12-18-201509:49 PM
FAILED ELECTRONIC BYPASS VALVE PULLEY Plumbing | Systems and Fixtures 6 03-24-200706:13 PM
Auto Winterization Water Heater Bypass Valve leaking Rick Buddrus Plumbing | Systems and Fixtures 8 08-30-200512:32 PM

Where is the water heater bypass valve?

04-18-2017, 04:11 PM 1
Newbie Trailer Camper!Join Date: Feb 2017Location: North Ogden, UtahPosts: 122 Where is the water heater bypass valve?


I just bought a 2014 Forest River Evo T2850. I’m new to camping and trying to dewinterize to get ready for our first trip this weekend. It wasn’t winterized with antifreeze, previous owner just aired the lines out. I want to sanitize the fresh water system and found steps to do it, but can’t find the water heater bypass valve. I found the anode rod outside which was removed for the winter. Also found a small hot and cold water low point drains outside, and a big fresh water low point drain valve. But can’t find the water heater bypass. I can’t see a way to access the water heater from inside. It appears to be under the stove.

04-18-2017, 04:24 PM 2
Senior MemberJoin Date: Sep 2013Location: IdahoPosts: 9,839 Are there a couple of screws holding on a panel?If so remove the screws an see if the valves are there.Is the fridge next to the stove?Panel under it?_2016 F350 6.7L LB CC Reese 28K 2014 Chaparral Lite 266sab”Those who would give up essential Liberty, to purchase a little temporary Safety, deserve neither Liberty nor Safety.” 201419 days camping201517 days camping 2016 20 days camping
04-18-2017, 04:24 PM 3
Senior MemberJoin Date: Sep 2010Location: Eastern OntarioPosts: 4,130 If panels underneath stove can not be removed, then remove the two drawers next to stove and see if you can access valves._Fonzie2011 Rockwood 8319SS with ProPride 3P hitch/GoodYear Marathons/TST TPMS 5072019 F350 Ruby Red 6.7l diesel 3.31 axle electronic locker Yamaha 3000iseb generator:Progressive Ind. EMS-HW30C: Eastern OntarioNights Camped: 2014 (18) 2015 (18) 2016 (36) 2017 (32) 2018 (42) 2019 (28) 2020 (35)
04-18-2017, 04:28 PM 4
Senior MemberJoin Date: Jun 2012Posts: 10,907 Looking at one online, it looks like it’s below your stove. However, it doesn’t look like there’s direct access from there. You may have to open/remove the drawer(s) under the sink and get to it from the side.The other access route may be to remove the furnace’s return air return under the fridge and get to it from the other side. (You’re furnace is under your fridge, BTW.)_1988 Coleman Sequoia – popup (1987-2009) – outlasted 3 Dodge Grand Caravans!2012 Roo19 – hybrid (2012-2015)2016 Mini Lite 2503S – tt (2015 -?)2011 Traverse LT, 3.6L, FWD2009 Silverado 1500 Ext Cab, 5.3L, 4×4, 3.732016 Silverado 2500HD Dbl Cab, 6.0L 4×4, 4.10
04-18-2017, 04:31 PM 5
Newbie Trailer Camper!Join Date: Feb 2017Location: North Ogden, UtahPosts: 122 Yeah it does have screws in the panel under the stove. I’ll try taking that off tonight to see if I can get to it. The fridge is just to the right of the stove, so no access there.
04-18-2017, 04:35 PM 6
Senior MemberJoin Date: Sep 2013Location: IdahoPosts: 9,839 Suggested approach, belly crawl, with lots of lumens and long arms will be a big bonus._2016 F350 6.7L LB CC Reese 28K 2014 Chaparral Lite 266sab”Those who would give up essential Liberty, to purchase a little temporary Safety, deserve neither Liberty nor Safety.” 201419 days camping201517 days camping 2016 20 days camping
04-18-2017, 11:11 PM 7
Newbie Trailer Camper!Join Date: Feb 2017Location: North Ogden, UtahPosts: 122 So I was able to get to it through the acess panel under the stove. Thanks for the help there!Attached a pic to show the 3 valves, one hot, one cold, and one in between. Which valves do I open when doing dewinterizing and cleaning the fresh water system? And after its all cleaned out, which valves do I leave open to use the hot water heater all summer? Thanks again!

Attached Thumbnails

Click image for larger versionName: 0418172112.jpg Views: 2822 Size: 238.2 KB ID: 135149

04-18-2017, 11:15 PM 8
Senior MemberJoin Date: Oct 2011Location: Fort WorthPosts: 661 it’s perfect as shown. The cold supply is open, hot is open middle bypass is closed._Joe2015 Wildwood 27RKSS (now sold)2015 Silverado 2500HD Duramax
04-18-2017, 11:42 PM 9
Newbie Trailer Camper!Join Date: Feb 2017Location: North Ogden, UtahPosts: 122 I thought to clean out the fresh tank, lines, and water heater you had to close some valves though? When would you ever open the middle bypass?
04-18-2017, 11:50 PM 10
Site TeamJoin Date: Jan 2007Location: Camano Island, WashingtonPosts: 27,408 Quote:Originally Posted byonecrazyfoo4uI thought to clean out the fresh tank, lines, and water heater you had to close some valves though? When would you ever open the middle bypass?when you winterize.you open the middle and close the other two, to bypass the WH._Dan-Retired California Firefighter/EMTShawn-Musician/Entrepreneur/Wine Expertand Zoe the Wonder Dog(R.I.P.) 2016 PrimeTime TracerAIR 255, pushing a 2014 Ford F150 SCREW XTR 4×4 3.5 Ecoboost w/Max Tow Package4pt Equal-i-zer WDH and 1828lbs of payload capacity
04-19-2017, 10:39 AM 11
Newbie Trailer Camper!Join Date: Feb 2017Location: North Ogden, UtahPosts: 122 Based on this list of steps, you should bypass the water heater when doing the initial cleaning. Then open the valves to let it fill. Is that not the preferred method?1. Empty any antifreeze in your FW tank.2. Remove water heater drain plug to ensure it’s empty as well. Re install drain plug3. Fill and empty your FW tank to rinse it out.4. Fill your FW tank with a solution of 1/4 cup beach to 15 gallons of water. 5. Make sure your water heater valves are in the bypass position.6. Turn on your water pump.7. One by one, turn on each faucet until you no longer see pink then turn it off.8. Put your water heaters valves back into the normal operating position.9. Turn on any hot water valve to allow water / bleach solution to fill the water heater. Turn off one filled.10. Top off your FW tank with water. Allow bleach solution to remain in your water lines for several hours at least. Over night is preferable.11. Once soaking is complete, drain your FW tank, fill and drain again to rinse. Fill it once more.12. Open water heater drain plug until water heater is empty. Reinstall plug.13. Turn on water pump.14. One by one, turn on each faucet and let run until you no longer smell bleach.15. Fill and drain your hot water heater a couple of times to rinse.
04-19-2017, 10:32 PM 12
Newbie Trailer Camper!Join Date: Feb 2017Location: North Ogden, UtahPosts: 122 So are the steps above the right steps to follow? Bypass the WH for the first bit if flushing, then open it up to fill and clean out?
Posting Rules
Youmay notpost new threadsYoumay notpost repliesYoumay notpost attachmentsYoumay notedit your posts


BB codeisOn SmiliesareOn code isOnHTML code isOffTrackbacksareOff PingbacksareOff RefbacksareOff


Forum Rules

Disclaimer:This website is not affiliated with or endorsed by Forest River, Inc. or any of its affiliates. This is an independent, unofficial site.All times are GMT -5. The time now is03:54 AM.

Water heater bypass valve – Grand Design Owners Forums

Because of your transaction, the dealership may collect information about you that is similar to the information provided below. 1. We obtain nonpublic personal information about you from the sources listed below: 1. In addition to the information we obtain from you on applications or other forms, we also get information about your transactions with us, our affiliates, or others, as well as information we receive from consumer reporting agencies (e.g., credit bureau). 2. We may release all of the information we collect, as specified above, to organizations that perform marketing services on our behalf, as well as to financial institutions with which we have joint marketing agreements, as indicated above.

If you are a customer or a former customer, we may additionally release nonpublic personal information about you to nonaffiliated third parties in accordance with applicable law.

4.

5.

This application is submitted on the understanding that all information provided is true, accurate, and complete to the best of one’s ability.

Important: Please keep in mind that credit is provided based on factors such as credit ratings, payment history, asset value, and other factors, and that the final decision is made by the bank, not us.

It is your agreement that you will be responsible for any fees associated with the loan.

With your electronic signature, you certify that you have read and understood our rules, terms and conditions, and that you give us permission to begin processing your loan application.

Water Heater ByPass Valves – Dutchmen Owners

01-17-2021, 08:24 PM 1
Senior MemberJoin Date: Mar 2020Location: SequimPosts: 133Washington Water Heater ByPass Valves


2020 Kodiak Ultra Lite 201QB: Does anyone know how to access the bypass valves on the water heater for winterizing. I cannot find them using the outside access to the water heater. These are normally located on the back of the water heater but there is no access to the back without cutting through the paneling next to the toilet or opening up the plastic seal under the trailer; not sure going in from under the trailer would even solve the issue.Asked customer support, which is a joke; they just said to have the dealer do it. No way am I going to pay $200 plus 4 hour round trip to have $15 worth of antifreeze put into the water system._Open Road Pathfinder2020 Kodiak Ulta Lite 201QB2021 Ford F150 Twin Turbo V6Logging the miles in the USA. Adventure awaits around every corner.

01-18-2021, 04:44 PM 2
Senior MemberJoin Date: Jan 2018Location: Beaver DamPosts: 694Wisconsin There is probably a panel that is screwed on instead of being stapled on.Find the panel with screws.Otherwise you must pry the panel off.My Kodiak Cub has access inside the pass through storage compartment.It had a dozen screws holding two panels up.The antifreeze fill hose was under a bedroom cabinet and was held in place by four screws.I wish you good luck and happy trails ahead._Paul BristolDutchman Kodiak Cub KD176RD 2018Nissan Pathfinder 2015
01-18-2021, 06:05 PM 3
Senior MemberJoin Date: Mar 2020Location: SequimPosts: 133Washington Water Heater ByPass Valves


Thanks for the quick reply. My pass through storage is at the opposite end ofthe TT from the water heater. The only panel is on the left side of the toilet and has trim around it so it cannot be pried off; I may have to use my dremel or plunge saw to open it up. Just hoping for a better solution._Open Road Pathfinder2020 Kodiak Ulta Lite 201QB2021 Ford F150 Twin Turbo V6Logging the miles in the USA. Adventure awaits around every corner.

01-18-2021, 09:11 PM 4
Senior MemberJoin Date: Jan 2018Location: Beaver DamPosts: 694Wisconsin Can you reach it through the drawers?If you do decide to go through the framed panel, leave a 1 to 2 inch rim.You can cut a new panel and screw it to the rim.Mine works that way.I actually made a door mounted to the rim._Paul BristolDutchman Kodiak Cub KD176RD 2018Nissan Pathfinder 2015
01-18-2021, 09:44 PM 5
Senior MemberJoin Date: Mar 2020Location: SequimPosts: 133Washington Quote:Originally Posted bypersistentCan you reach it through the drawers?If you do decide to go through the framed panel, leave a 1 to 2 inch rim.You can cut a new panel and screw it to the rim.Mine works that way.I actually made a door mounted to the rim.Thanks for the idea of putting a “door” in. Little tight for my situation but a lift out panel would work._Open Road Pathfinder2020 Kodiak Ulta Lite 201QB2021 Ford F150 Twin Turbo V6Logging the miles in the USA. Adventure awaits around every corner.
01-19-2021, 03:15 PM 6
MemberJoin Date: Mar 2015Location: oshkoshPosts: 48Wisconsin Have you tried calling the dealer you bought it from, or any dealer that sells and services your brand?They should be able to tell you over the phone where access is located.
01-20-2021, 09:46 PM 7
Senior MemberJoin Date: Mar 2020Location: SequimPosts: 133Washington The dealer said to bring it to them and they would winterize the trailer for me._Open Road Pathfinder2020 Kodiak Ulta Lite 201QB2021 Ford F150 Twin Turbo V6Logging the miles in the USA. Adventure awaits around every corner.
01-21-2021, 12:53 PM 8
Senior MemberJoin Date: Jun 2017Location: Wesley ChapelPosts: 2,609Florida Quote:Originally Posted bykjlarsonThe dealer said to bring it to them and they would winterize the trailer for me.They would take shortcuts.Assign it to the newbie in the service department that knows less than anyone.Best to figure it out and at least be able to do it.I would definitely learn (YouTube)the winterization by air technique so you would only need to utilize antifreeze in the drains. Don�t forget the spray ports.
01-23-2021, 09:49 PM 9
Senior MemberJoin Date: Sep 2018Location: prophetstownPosts: 351Illinois Find the water heater on the outside then go inside and line up where it was on the outside,should be a panel in that horizontal line and should be behind there. At least that is where every rv I have has is the location
01-23-2021, 10:28 PM 10
New MemberJoin Date: Jul 2017Location: EstacadaPosts: 6Oregon On my trailer, the water heater is on the street side toward the head of the bed, I found my panel under the mattress (street side, on the platform the mattress sits on), unscrewed the panel and had to reach down to feel the bypass valve.
01-24-2021, 01:57 AM 11
Senior MemberJoin Date: May 2015Location: GregoryPosts: 86Michigan Your hot wster heater is probably underneath the drawers next to the toilet. That panel should have either 2 or 4 screws to remove it.
01-24-2021, 02:08 AM 12
New MemberJoin Date: Mar 2017Location: LondonPosts: 8Ontario I have a Dutchman Aerolite 195QB and has the same floor plan as your trailer.The panel under the 2 drawers in the bathroom had screws holding the panel. If you remove that, you can reach into the bypass valves on the water heater.The panel beside the furnace also has screws and the water pump is behind that.I installed bypass there to have antifreeze pumped through the system without putting it into the fresh water tank.Good luck and I hope this helps.
01-24-2021, 02:43 AM 13
New MemberJoin Date: Jul 2020Location: Granite FallsPosts: 2Washington I have the same exact trailer and am using the dry method of winterizing. In a nutshell, you simply drain your freshwater tank and water heater, open all the drain valves and faucets, attach a blowout adapter to your city water hookup and blow out any leftover water. You can get the adapter for less than $10 on Amazon and use an air compressor. I add RV antifreeze to the sinks, shower, and toilet to prevent freezing in the drain pipes. My favorite part is that when you’re ready to use the trailer, you simply close the faucets/valves and fill the tanks. No cleanup or flushing required. Easy day!
01-24-2021, 04:14 AM 14
New MemberJoin Date: Aug 2018Location: SnohomishPosts: 4Washington 201QB Water Heater Access


Quote:Originally Posted bykjlarson2020 Kodiak Ultra Lite 201QB: Does anyone know how to access the bypass valves on the water heater for winterizing. I cannot find them using the outside access to the water heater. These are normally located on the back of the water heater but there is no access to the back without cutting through the paneling next to the toilet or opening up the plastic seal under the trailer; not sure going in from under the trailer would even solve the issue.Asked customer support, which is a joke; they just said to have the dealer do it. No way am I going to pay $200 plus 4 hour round trip to have $15 worth of antifreeze put into the water system.I have a 2018 201QB. My water heater is in back driver side corner.Probably like yours. Mine has a panelwith screws under the drawers in the bathroom beside the toilet. Remove that and water heater and valves can be reached. I can also reach (barely) by removing both drawers without removing the panel.

01-24-2021, 03:57 PM 15
Senior MemberJoin Date: Sep 2018Location: prophetstownPosts: 351Illinois Glad you found it_
Posting Rules
Youmay notpost new threadsYoumay notpost repliesYoumay notpost attachmentsYoumay notedit your posts


BB codeisOnSmiliesareOncode isOnHTML code isOffTrackbacksareOff PingbacksareOff RefbacksareOff


Forum Rules

Leave a Reply

Your email address will not be published.