Tankless Water Heater – Setting the Right Temperature
Your tankless water heater has unexpectedly gone out of service, and you’re stuck with no hot water? You’re in the shower when all of a sudden the warm water is replaced with frigid! You may reach us at 281-302-6710 to get it resolved. It is possible that the temperature setting on your tankless water heater is the source of the problem. In this video, Master Plumber Bryan Graham explains why this occurs and how to correct the problem.
Summary of Setting the Temperature of Your Tankless Water Heater
Your tankless water heater has unexpectedly gone out of service, and you’re stuck without hot water? The water in your shower is abruptly changed with cold water while you’re in it! To get it fixed, call 281-302-6710. If your tankless water heater’s temperature is set too high, it might cause problems. In this video, Master Plumber Bryan Graham explains why this occurs and how to correct it.
Recommendation from Facebook Graham Plumbing Services is certified A+ by the Better Business Bureau of Houston and services consumers in Sugar Land, Missouri City, Katy, and other communities around the greater Houston region. See what our customers have to say about us by reading their reviews and testimonies.
We’re Service Plumbers Too!
Our plumbers are certified to fix and replace your water heater as well as install new ones. Changing the temperature setting on your tankless water heater might sometimes solve the problem with your tankless water heater. To get your water heater inspected, call us at 281-302-6710 or click on the icon below.
Tankless Water Heater Temperature Setting 2022 – Important Things To Consider
Take frigid or blistering hot showers, depending on your preference. Is it possible that you like lukewarm water? Many homeowners may not give much thought to their tankless water heater, yet it is an important component of your home’s plumbing system. An inefficient water heating system might be the most significant contributor to high power and water expenses. This makes scheduling regular repair and maintenance of your unit vital in order to guarantee that hard water is not hurting it and that the unit is operating within the optimal temperature range.
There are several safety and health hazards that you should be aware of.
In addition, you should make every effort to reduce your impact on the environment.
We must acknowledge that having access to these priceless possessions entails a duty of gratitude on our part.
Tankless Water Heater Temperature Setting – Things To Consider
Upon installation of a water heating equipment on your property, the temperature is set to 140 degrees Fahrenheit as a default setting. It is possible to get burnt if you take a bath with only warm water while the temperature is this high. Toddlers and the elderly are at a very high risk of suffering severe burns. Children’s skin is particularly sensitive, and elderly people’s reflexes may take a long time to recognize that the water is excessively hot.
As a result, you may be asking why the tankless water heater temperature control has been set to an excessively high setting. There are two primary reasons for this:
Bacterial Accumulation Prevention
Bacteria tend to congregate in warm, stagnant water, although it can also accumulate in cold water on occasion. However, it is most commonly seen growing in water that is between 41 and 135 degrees Fahrenheit in temperature. The temperature setting of 140 degrees Fahrenheit is somewhat higher than the risk zone limit of 130 degrees Fahrenheit. As a result, producers regulate the temperature to avoid bacterial development. Despite this, some specialists believe that a temperature of 120 degrees Fahrenheit is safe for the majority of people.
A pre-set water temperature is included with the newer units, and they also have an anti-scaling technology that delivers water to the tap at 120 degrees Fahrenheit.
It is spread in the air by inhaling filthy water droplets when bathing or taking a shower.
When companies offer you a tankless gas water heater, their first aim is to ensure that you are completely satisfied. The fact that you have energy and water bills does not worry them. They want you to be completely happy when you turn on the water faucet and receive properly warm water from the faucet. In the event that you receive just lukewarm water, the vast majority of you will conclude that the device is incapable of heating water and that your hard-earned money has been spent. The temperature of a tankless water heater may be adjusted to provide hot water with no effort.
However, it has a significant impact on sales psychology.
Nonetheless, investing in a high-quality heater will prove to be useful in the long run.
Customer satisfaction is the number one objective of the companies that provide tankless gas water heaters. They are unconcerned about your power expenses or water use. Their goal is for you to be completely happy when you turn on the water faucet and receive properly warm water from it. In the event that you only receive lukewarm water, the vast majority of you will conclude that the device is incapable of heating water and that your hard-earned money has been spent. You only need to change the temperature of your tankless water heater to obtain hot water.
The impact on sales psychology, on the other hand, is significant. As a result, the temperature of the device should not be given too much consideration because it is just a question of adjustment. Nevertheless, investing in a high-quality heater will be helpful to you in the long run.
Frequent Hot Showers
If you have a large family who takes many showers at the same time, a 20-degree temperature difference might have a significant impact on the amount of hot water available. If you take regular hot showers in your home, the 120 degrees Fahrenheit tankless water heater temperature setting is the best choice for you.
Do you have a dishwasher that is more than a decade old? Many earlier versions do not have an advanced heater, and as a result, they will not be able to wash the utensils correctly with a tankless water heater temperature change of less than 140 degrees Fahrenheit.
Kids And Elders In The House
The water temperature should be set at 120 degrees F in homes with small children and elderly residents to reduce the danger of burning or scorching at the water fixture.
How To Set The Best Temperature For Tankless Water Heater?
There are five distinct types of water heating systems available for purchase in the marketplace. Whether you have a standard tank-style or a tankless unit, we will provide extensive instructions on how to control the temperature of your unit in order to save money on your utility costs. In addition, you will learn how to regulate the temperature on a Rinnai tankless water heating system. So let’s get started.
These gadgets rely on the energy provided by the sun and therefore require solar panels to be installed on the roof. They perform admirably on bright, sunny days, but in inclement weather, you will want a backup unit to keep you safe. When it comes to energy efficiency, they are just great. However, before you can put them to use in your home, you must first obtain clearance from the government. Apart from that, it is incredibly expensive, and you will not get a return on your investment for a lengthy period of time.
Tankless Water Heaters
No container is provided as implied by the name of this group. Their operation is dependent on super-heated coils that quickly heat water anytime you use it. Because they are available in several sizes, you may choose the one that best suits your water requirements. Tankless gas water heaters perform significantly better than electric water heaters. The electric ones, without a doubt, will increase your electricity bills. The next step is to learn how to adjust the temperature of both gas and electric heaters.
The temperature control valves for tankless water heaters have a knob with different names on it, such as a, b, and c, on them.
The following is the significance of each label:
- Low temperatures range from 80 to 90 degrees Fahrenheit
- Hot temperatures range from 120 degrees Fahrenheit to 160 degrees Fahrenheit
- A temperatures range from 130 degrees Fahrenheit to 140 degrees Fahrenheit
- C temperatures range from 150 degrees Fahrenheit to 160 degrees Fahrenheit
Some machines additionally offer a “vacation” mode, in which the water is not heated but the pilot light is kept lit.
Electric Tankless Water Heater Temperature
Take control of the circuit breaker and seize control of the access panels.
Under the insulation, look for the thermostat tankless water heater temperature adjustment. Using the flat screwdriver, move the thermostat control closer to the desired temperature. Change the access panels and insulation first, and then turn on the electricity to complete the process.
Heat Pump Water Heaters
The heat from the wind and the soil is used by these gadgets to raise the temperature of the water. They just utilize electricity to transmit heat; they do not use it to generate it. Furthermore, it is equipped with a boiler that must be cleaned on a regular basis. These gadgets have the potential to save you up to 60% on your electricity expenses. They are, however, quite expensive, and their deployment necessitates a significant amount of room. The pump at the top of the tower requires around 8 feet of vertical space.
These water heaters heat the water by utilizing exhaust gas as a heat source. If you have access to a natural gas supply in your neighborhood or home, this unit would be an excellent alternative for you. Because it has a larger tank, it is an excellent choice for large families. It has a control panel that allows you to adjust the temperature.
Tank-Storage Water Heaters
Traditional water heaters are capable of heating a large volume of water quickly and efficiently. Because the tank is insulated, the water remains warm for an extended period of time. The boiler’s capacity is limited, so if you demand more hot water than the boiler can provide, you may have to wait up to an hour or more for it to refill. They are low-cost and are most typically seen in residential and commercial settings, where they provide excellent value. The main drawback is that they use a lot of energy when in use.
It is necessary to first obtain a straight screwdriver in order to manage the temperature of the device.
With the aid of the screwdriver, you may make adjustments to the thermostat.
How To Improve The Efficiency And Performance Of The Tankless Water Heater?
Water heater controller kits are now readily accessible on the market, and they are inexpensive. As a result, if you have a solid internet connection and a mobile phone or tablet, you may purchase and install it to regulate the temperature of your unit. With this kit, you will be able to operate your device from any location on the planet. Additionally, you may turn it off to conserve energy and then turn it back on when you get home.
Insulate Traditional Tank-Style Machines
Water heater controller kits are now readily accessible on the market, and they are rather inexpensive. In order to regulate the temperature of your unit from your mobile phone or tablet when connected to a solid internet connection, you may purchase and install the device. You will be able to operate your gadget from any location in the world if you purchase this package. It’s also possible to turn it off to conserve energy and then turn it back on when you get home.
Replace Out-Dated Models
If your appliance is older, or if you regularly take showers with cold water, the likelihood is that your heater is not operating efficiently.
The installation of a new gadget may provide you with a more pleasant and stress-free start to your day than previously. Because current hybrid and tankless systems are extremely energy efficient, you may save a significant amount of money on your utility costs by utilizing them.
You may have a less-than-efficient heater if your equipment is outdated or if you routinely take showers with icy water. Your day may start off much more comfortably and stress-free if you have a new device installed in your office. As a result of their excellent energy efficiency, new hybrid and tankless systems can help you save a significant amount on your utility expenses.
Decrease The Water Flow
It is possible to reduce the amount of warm water used by replacing old-fashioned showerheads and fixtures with newer models that require less water flow.
Now that you’ve finished reading this comprehensive guide, you should be fully aware that the greatest tankless water heater temperature setting is 120 degrees Fahrenheit in ideal circumstances. By using this option, you may save money on electricity while also reducing the risk of burns and other health risks. The best part is that it destroys bacteria, ensuring that you and your family remain safe and healthy. It is possible to find a variety of various water heating systems on the market. The most recent models contain a temperature control knob that allows you to quickly fine-tune the temperature to your specific tastes.
What’s The Best Water Heater Temperature Setting?
A hot shower may receive a bad name from your dermatologist since it might dry up your skin, but many people like it for its relaxing properties! In a household where hot water is fiercely competed for among family members, or even between your washing machine and dishwasher, you may be tempted to raise the temperature of your hot water heater. But at what point does it become too hot? There are differences of opinion between the Department of Energy and the industry. Scalding can occur at temperatures below 120 degrees Fahrenheit, although 140 degrees Fahrenheit is the normal default temperature.
Whatever temperature setting you choose, it’s vital to remember that the kind of pipe used, how the water is heated (gas or electric), and whether your system is tanked or tankless have no effect on the temperature you choose.
- Many people enjoy taking a hot shower, despite the fact that it is criticized by dermatologists for drying off their skin. In a household where hot water is fiercely competed for among family members, or even between your washing machine and dishwasher, you may be inclined to raise the temperature of your hot water heater to compensate. When is it too hot to be uncomfortable? Manufacturers and the Department of Energy hold opposing viewpoints. Scalding can occur at temperatures below 120 degrees Fahrenheit, although 140 degrees Fahrenheit is the standard setting. Any temperature below 120 degrees Fahrenheit, according to the majority of experts, increases the likelihood that bacteria from stagnant water, such as the bacterium legionella, which causes Legionnaire’s disease, would grow within your water heater. Whatever temperature setting you choose, it’s vital to remember that the kind of pipe used, how the water is heated (gas or electric), and whether your system is tanked or tankless have no effect on the temperature you choose to use. In order to properly adjust your thermostat, you need take into account the following factors:
But what about the expenses of energy? We get what you’re saying! Water heaters account for around 14-18 percent of the total energy consumed by a residence on a typical day. Furthermore, it may be tempting to lower the temperature in order to save money. It should be noted that a 10°F decrease in temperature is related with a 3-5 percent reduction in energy use. Legionella, on the other hand, can live at temperatures as high as 122°F. So make sure to strike a balance between your risk tolerance and your energy consumption targets!
- Many hot water heaters are equipped with a temperature control dial.
- Start with 120°F and gradually increase the temperature in small increments until you get your desired result.
- A water tank booster may be an appropriate option in houses where the requirement to maintain a greater hot water temperature for health safety must be balanced with the need to reduce the danger of scorching.
- Alternatively, you could live in a house where, no matter what temperature you select, hot water takes an inordinate amount of time to reach the faucet (or a certain tap farthest from the hot water heater).
A hot water circulating system circulates hot water gently through the pipes so that you are not forced to wait. Whatever you choose, we’re only a phone call away if you’re having issues with your hot water!
What Temperature Should I Set My Water Heater At?
Get in Touch With Us
Setting the Ideal Hot Water Heater Temperature
Are you tired of burning your hands every time you turn on the hot water in the shower? What if you’re having trouble getting a comfortable water temperature, no matter how high you turn the faucet up? These are not always indications that your water heater is malfunctioning, but rather that the temperature setting you have chosen is not optimal for your purposes. A water heater that has been installed incorrectly can have a significant influence on your life, even in areas that are not directly linked to your plumbing or heating system.
It can also have a negative influence on your health or the health of people who share your home with you.
A definitive or simple response cannot be given; rather, part of it is a matter of personal choice.
General Recommended Water Heater Temperature
Is it getting old to burn your hands every time you turn on the hot water? What if you’re having trouble getting a comfortable water temperature, no matter how high you turn the faucet? However, they are not always indications of a problem with the water heater; instead, they indicate that the temperature setting may not be appropriate for your needs. It is possible for a water heater that has been installed incorrectly to have a significant influence on your life, even in ways that are not directly linked to plumbing.
As a result, it can have a negative influence on your health as well as the health of people who share your house with you.
A definitive or unambiguous response cannot be given; rather, part of it is a matter of individual choice.
Considerations When Choosing a Water Heater Temperature Setting
Do you have any at-risk individuals residing in your home? Those who are particularly sensitive to high temperatures may suffer serious consequences if they are exposed to overly hot water. Water at 150 degrees Fahrenheit may cause third-degree burns in newborn babies in only two seconds, while water at 140 degrees can cause third-degree burns in babies in just five seconds. Temperature reduction is more safer for your infant and far more cost-effective in terms of energy use. A water heater set at no more than 130 degrees is recommended if you have a baby or any youngster under the age of three in your household.
- Those who have compromised immune systems or who suffer from respiratory ailments, on the other hand, may benefit from a hotter water temperature in order to destroy bacteria while also increasing the concentration of steam in the air when bathing.
- Do you have an appliance that is energy efficient?
- Essentially, these systems take in water and then raise the temperature to even higher levels to provide an even better and more hygienic clean, all without the need for you to raise the temperature coming from your water heater.
- If, on the other hand, it won’t be for a long time, you may wish to raise the temperature of your water heater to 140 degrees.
- How many people do you have living in your house?
- Those who like a hotter shower increase the ratio of hot to cold water in their shower.
- The temperature of the water that comes out of your water heater, on the other hand, will have an impact on this as well.
- People that use cooler water heaters will require more hot water and less cold water in order to achieve their goals.
- If you have a large home with multiple people living in it, you should raise the temperature of the water to ensure that your hot water supply lasts as long as possible.
Do you require assistance with your water heater in the Los Angeles area? Whether you want a thermostat replacement or the installation of a new water heater, contact the professionals at Moe Plumbing Services at (818) 396-8002 now.
More on Water Heaters:
- Six Common Problems with Your Home Water Heater
- What Every Homeowner Should Know About Water Heater Maintenance
- Six Common Problems with Your Home Water Heater
Ideal Water Heater Temperature Settings: Tank & Tankless
Even though you may not give your water heater much thought on a regular basis, it is an extremely important part of your home’s plumbing system and should not be overlooked. Although most people set their water heater temperature between 130 and 140 degrees Fahrenheit, according to Consumer Product Safety Commission guidelines, reducing your water heater temperature to 120 degrees Fahrenheit can save you money and avoid scorching. Keeping the temperature of your water heater lower will save you a lot of energy and money while also extending the life of the heater.
What Is Normal Water Heater Temperature?
Manufacturers of water heaters are not required to specify a specified operating temperature for their devices. Some businesses adhere to the Consumer Product Safety Commission’s advice that their heaters be set at 120 degrees. However, data indicates that at least 41% of water heaters operate at or above this temperature. Some families are quite content with it. Others, on the other hand, may be at risk for second-degree burns as a result of this. Your water heater’s working temperature typically varies between 120 and 140 degrees Fahrenheit, as we’ve already established.
- Water heaters that have a temperature indicator are available on the market.
- Choose a more exact temperature measurement to be on the safe side.
- Allow the water to flow at a variety of settings for a certain amount of time.
- However, for reasons of safety, the temperature should be set at 120 degrees Fahrenheit at all times.
What Temperature Should Your Water Tanks Be Set At?
It is recommended that you set the temperature of your water heater between 120 and 140 degrees Fahrenheit. If you drop the temperature of your water any further, you run the danger of polluting your water source with bacteria. If the temperature rises beyond 140 degrees, you run the danger of causing serious burns in your house. Temperatures of 120 degrees Fahrenheit are generally suggested for water heaters. Although you should not adjust your thermostat to this degree right away, you should consider doing so.
You should do the following steps before setting or altering the temperature of your water heater, as we’ll outline below:
Measure the Current Temperature
Temperatures between 120 and 140 degrees Fahrenheit should be used to set your water heater. It is possible that germs will be introduced into your water supply if you drop the temperature any further. The risk of serious burns in your house is increased when the temperature exceeds 140°F. Generally speaking, it is advised that you set your water heater temperature to 120 degrees Fahrenheit or higher. Although you should not adjust your thermostat to this degree immediately, you should consider doing so.
Other factors influence the choice of location that is most suitable for your family’s budget and overall health and well-being. You should do the following steps before setting or altering the temperature of your water heater, as we’ll explain further down:
Access the Thermostat
First, turn off the water heater’s power source before making any modifications to the water heater. Electric heaters are often configured with two thermostats and two heating components, which is standard practice. As a result, you’ll need to get access to the thermostats and make adjustments. Set the thermostat to the same temperature as the furnace for optimal operation. The access panels should be removed with a flat-head screwdriver or a Philips screwdriver. Remove the screws holding the panel in place in order to reveal the thermostat.
It is possible that you may need to remove insulation in order to see your thermostat clearly.
Test the Water temperature
Before making any adjustments to the water heater, consider taking some measurements of the present temperatures. Take a jar of hot water and use a kitchen thermometer to determine the temperature of the water. It will provide you with the ability to determine its current temperature. After that, you may proceed to make the necessary changes to the heater. Using a cooking thermometer, confirm that the temperature has been reached at the appropriate level. If it has, everything is in working order.
Water Heater Temperature and Saving Energy
Setting the temperature of your water heater to the proper level will help you save money on energy costs, regardless of the type of water heater you use. The following are some measures you may take to guarantee you conserve energy:
Set The Temperature to 120° F
Even if you have a tankless water heater, setting the temperature at the proper level can save you money on energy costs. The following are some measures you may take to help you save on energy consumption:
Select An Energy Efficient Appliance
Water heaters are built in a variety of ways. When shopping for a water heater, never choose for the cheapest one available. The lower-priced alternative may save you money in the short term, but it may cost you more in the long run due to increased energy use. Always choose for models that are Energy Star certified and have energy factors between 0.67 and 0.7. These models are energy-efficient, and you will save a significant amount of money on your energy bills.
Use Cold Water
Each type of water heater has its own design. A cheaper water heater should never be chosen when purchasing a water heater. The lower-priced alternative may save you money in the short term, but it may cost you more in the long run because of increased energy use. Consistently choose for models that are Energy Star certified and have energy factors of 0.67 to 0.7. As a result of their energy-efficiency, these models can help you save a lot of money on your energy bills.
How to Adjust the Water Heater Temperature On Your Unit
There are at least five different types of water heaters available on the market. Let’s go over them one by one in terms of lowering your energy bills. We’ll also go through how you can adjust the temperature of the heaters, which includes:
Storage tank Water Heaters
The majority of them are classic heaters, which heat only as much water as the tank can comfortably contain at a time. Due to the insulation, the tanks will remain warm until water is required. If you need more hot water than the tank can hold, you’ll have to wait until the tank refills. It takes around 1 to 2 hours for the water in the tank to heat up once more. These heaters are among the most popular and least expensive alternatives available.
They can, however, be made more energy efficient if you use a timer to operate them. It enables the heater to be turned off when the water reaches the desired temperature. In order to alter the temperature on the tank water heaters, follow the instructions outlined below:
- For the most part, these are typical heaters that heat the amount of water that the tank is capable of holding comfortably. Due to the insulation, the tanks will remain warm until water is required. It is necessary to wait if you demand more hot water than the tank is capable of supplying. To re-heat the water in the tank, it takes roughly 1 to 2 hours at most. Among the most frequent and least expensive choices are electric space warmers such as these: If you add a timer, however, they will be more energy efficient. Because of this, the heater may be turned off after the water has reached the desired temperature. To alter the temperature of the tank water heaters, follow the instructions outlined below.
Tankless Water Heater
These water heaters do not have a tank to store water. They feature coils that are super-heated and can heat water instantly. In order to accommodate the volume of water required, the coils are available in a variety of various diameters. Natural gas is the fuel of choice for the vast majority of tankless water heaters. The use of an electric heater will almost certainly result in an increase in your energy cost. The LED panel may be used to change the temperatures.
Heat Pump Heaters
Heat pumps use the heat from the ground and the air to raise the temperature of the water in their reservoirs. Heat pump heaters, like all other types of heaters, utilize electricity to transport heat rather than to create it. There is also a tank that has to be cleaned on a regular basis. Heat pumps are well-known for their energy-saving capabilities, which may result in savings of up to 60% on energy costs. However, they require a significant amount of room for installation and are prohibitively expensive to purchase.
Solar Powered Water Heaters
These heaters heat water by harnessing the force of the sun. If you want to get the most out of your solar panels, you should install them on your roof. When used in warm climates and on sunny days, the water heaters are useful. During the rainy season, make sure you have a backup water heater ready. Solar-powered heaters are environmentally friendly. However, unless you receive a subsidy from the government, the expense of installing them is prohibitively expensive. They are equipped with a control panel that allows you to simply alter the temperatures.
Condensing Water Heaters
Exhaust gas is used to heat the water in these water heaters. If your home is equipped with natural gas, condensing gas is the most cost-effective alternative. Because of its big tank, the water heater is very well suited for large family houses. From the control panel, you may adjust the temperature to your preference.
Does Turning Up Your Water Heater Make Hot Water Last Longer?
Increasing the temperature of your water heater is one option for dealing with the problem. The technique taken here is to utilize less hot water while the temperature of the water is still high. The likelihood is that you have ever been in a warm or hot shower that suddenly become ice cold is considerable. It is a negative sensation, regardless of whether it is part of your bedtime ritual or your morning wake-up call. The issue here is that your hot water isn’t staying hot for very long. To accomplish this, increase the temperature of your thermostat that is attached to your hot water tank.
Considerations When Selecting a Water Heater Temperature Setting
A number of factors must be taken into account when determining the appropriate temperature setting for your water heater. The following are some questions that you must be able to respond to:
Are There At-Risk People Living In Your Home?
It is possible that persons who are sensitive to high temperatures will be badly harmed if the water is really hot. For example, it would take only two seconds of exposure to hot water at 150 degrees Fahrenheit for a tiny baby to suffer third-degree burns. If a newborn is exposed to 140 degrees for only 5 seconds, the same degree of burns is also feasible. Lowering the temperature is, therefore, not only safer for your kid, but it is also more cost-effective for you. If you have a newborn in your home, we recommend that you keep your heater temps at 130 degrees or above.
They should likewise adhere to the same rules and principles as everyone else.
Temperatures of around 140 degrees are recommended for such adults, given that there are no children present in the home.
Do You Own Energy-Efficient Appliances?
It is possible for persons who are sensitive to high temperatures to be gravely harmed if the water is really hot. A small baby would only require two seconds of exposure to hot water at 150 degrees Fahrenheit to suffer third-degree burns, as an example. An infant who is exposed to 140 degrees for only 5 seconds can likewise sustain the same level of burns.’ Because of this, lowering the temperature is better for your infant as well as for your energy bills in the long run. Keeping the temperature of your heater at 130 degrees is recommended if you have a baby in your home.
Likewise, they must abide by the same regulations and principles as well.
Provided there are no children around, we propose temperatures of approximately 140 degrees for such individuals.
How Many People Stay In Your House?
Especially when it comes to taking a shower, everyone has a favorite temperature for their water heating system. With the help of the cold and hot water knobs, you can effortlessly adjust the temperature to your liking. If you want a hotter shower, increase the hot-to-cold water ratio in your shower. A lower ratio indicates a colder shower experience. The temperature of the water flowing from the water heater, on the other hand, has an impact on the results as well. Because hotter water comes from the heater, you will require less hot water and more cold water in order to get the desired temperature.
It also implies that if you set the water temperature to a lower setting, you will run out of hot water more rapidly.
Smaller dwellings with fewer occupants are able to operate at lower thermostat settings.
Health and Safety Considerations
When you purchase and install a water heater in your house, the temperature should be adjusted to 120 degrees Fahrenheit. It is the factory-set temperature for the product in this configuration. Take a shower with the water flowing at this temperature and you’ll most certainly get burnt and scalded, according to the experts. As we’ve seen, the elderly and children are the most vulnerable groups when it comes to burns. However, there are still valid reasons why the temperatures are maintained at such elevated levels:
Preventing Bacterial Growth
Set the temperature of your water heater to 120 degrees Fahrenheit when you purchase and install it in your house. It is the factory-set temperature for the product in question. If you take a shower when the water is flowing at this temperature, you will almost certainly get burnt and scalded.
Burns to the elderly and children, as we have seen, are the most common causes of death and disability. The fact that the temperatures are still set so high is due to a number of valid causes.
When a manufacturer offers a water heater, they are primarily concerned about the customer’s pleasure with the product. They are less concerned with water conservation and energy conservation than they are with making us pleased with the items. If the water coming from the heater is only somewhat warm, a client may be led to believe that the heater is not functioning properly. Many consumers are happy that the heater is performing satisfactorily since they can get hot water from the faucet. As a result, manufacturers elevate these temperatures for marketing purposes in order to give the impression that their goods are extremely effective.
As we’ve shown, determining the optimal temperature for your water heater is simple if you follow the proper procedures. Selecting the optimal temperature setting will result in lower energy expenses as well as a longer service life for the heater. The optimal water heater temperature ranges between 120 degrees and 140 degrees Fahrenheit, and you should set your equipment to this range. Nevertheless, there are a few things to bear in mind when determining the optimal water heater temperature setting.
There is a good chance that you will have sufficient instant hot water in your home.
- What is the optimum water heater temperature for your home environment
- What temperature should I set my water heater at
- What is the best water heater temperature
DISCLAIMER: The information provided on HomeInspectionInsider.com is not intended to be professional guidance. Before beginning any job, you should contact with a competent expert and verify that all necessary permits have been obtained. It is owned and operated by Hubert Miles who is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by placing advertisements and links on their websites that direct traffic to Amazon.com (hereinafter referred to as “Amazon.com” or “Amazon.com Associates Program”).
Hubert Miles receives a commission for recommending visitors and commerce to these businesses.
What Temperature Should You Set Your Hot Water Heater?
The fact that the daily temps have fallen down into the “need to put on some socks and a sweater” level also means that I’ve been increasing the warmth of my morning showers and post-workout baths into the steamy-hot triple digits. It can be difficult to distinguish between “ahh” hot and “o scorching, and the line can be separated by the smallest of eyelash width modifications. However, aside from the pleasures of soaking in a hot bath or taking a long, hot shower, the temperature at which you set your water heater may have an unanticipated and subtle impact on your health.
Unwanted visitors that you may be bringing onto your skin, into your dishwashing machine, and through your faucet are possible.
According to the World Health Organization, there is a relationship between temperature and how it impacts potential microorganisms within residential water heating systems. There are two major and diametrically opposed risks:
- It’s also meant that I’ve started turning my morning showers or post-workout baths into steaming-hot triple digits now that the day temps have plummeted into the “must put on some socks and a sweater” level. It can be difficult to distinguish between “ahh” hot and “o scorching, and the line can be as thin as the thickness of an eyelash in some instances. In addition to the pleasures of soaking in a hot bath or taking a long, soothing shower, the temperature at which you set your water heater may have an unanticipated and subtle impact on your health. You see, stagnant water within water heaters, particularly those servicing several units in apartment buildings or older split structures, and the piping system that connects the heater to the taps can serve as breeding grounds for a wide variety of viruses. Unwanted guests that you could be bringing onto your skin, into your dishwashing machine, and through your faucet are possible. As a result, it is critical to strike a balance between setting the water heater at a temperature that reduces the danger of scalding while simultaneously maintaining a temperature that is high enough to prevent sickness, most notably legionellosis (Legionnaires’ Disease). According to the World Health Organization, there is a relationship between temperature and how it impacts potential microorganisms found in residential water heating systems. There are two primary dangers that are diametrically opposed to each other:
Prevention of Legionellosis from the World Health Organization
- Legionella kills nearly rapidly when temperatures above 70 degrees Celsius (158 degrees Fahrenheit). At 60 degrees Celsius (140 degrees Fahrenheit), 90 percent of the bacteria die in 2 minutes. At 50 degrees Celsius (122 degrees Fahrenheit), 90 percent of the bacteria die in 80–124 minutes, depending on the strain. At 48 to 50 degrees Celsius (118 to 122 degrees Fahrenheit), they may live but not reproduce
- Temperatures ranging from 32 to 42 degrees Celsius (90 to 108 degrees Fahrenheit) are ideal for development.
Although some manufacturers recommend that water heater thermostats be set at 140 degrees Fahrenheit, most homes only require them to be set at 120 degrees Fahrenheit, which also helps to reduce mineral accumulation and corrosion in your water heater and pipe system. Water heated to 140 degrees Fahrenheit also offers a safety threat, since it can cause scorching. Increasing the temperature of your water heater results in two types of savings: lower standby losses (heat lost from the water heater into the surrounding basement area) and reduced usage (from water demand or use in your home).
So what’s the ideal temperature then?
The Consumer Product Safety Commission (CPSC) believes that a temperature of 120 degrees Fahrenheit (49 degrees Celsius) provides the best balance between safety and comfort. It is advised that you bathe in accordance with the following guidelines, whether you set the temperature higher or lower than recommended by the Canada Safety Council:
- Never leave a child alone in a bathtub while the water is being drawn, and always check the water temperature before placing your child in the tub
- Before taking a bath or shower, check the temperature of the water. Initially, turn on the cold water, then gradually add hot water until the desired temperature is reached. Teach youngsters to switch on the cold water first and then turn off the hot water before doing anything else.
When it comes to setting the temperature on their water heaters, most people can get away with setting it between 120oF and 130oF. To test whether the 120oF temperature setting is suitable for your needs and to save energy while lowering your monthly energy bill, set your heater to that temperature and see if that is sufficient for your needs. Try increasing the temperature by 5 degrees Fahrenheit at a time until you achieve the ideal temperature for your requirements if 120 degrees Fahrenheit isn’t quite hot enough.
What Temperature Should a Hot Water Heater Be Set At?
Previous PostNext Post Previous Post
What Temperature Should a Hot Water Heater Be Set At?
Your water heater accounts for around 18 percent of the total energy consumed by your home. If the temperature of your water heater is set too high, you will be forced to pay the price in your monthly energy bill. The converse is true: if you have your water heater set too low, your water may not get hot enough (resulting in short showers), or worse, it may get contaminated with germs. Maintain a 120-degree temperature for your water heater at all times because infections can form in the stagnant water within the water heater, notably Legionella, which is extremely deadly.
In addition to being hot enough to keep viruses at away while not being scorching hot enough to cause blistering, 120 degrees will provide adequate hot water for most small households while still being relatively energy-efficient, according to the Environmental Protection Agency.
Factors That Affect Hot Water Temperature Setting
These criteria are unaffected by the kind of piping you have (PEX, PVC, or copper), the method of heating the water (gas or electric), or even if you have a tankless hot water heater installed.
- It is recommended that homeowners who have a dishwasher that does not pre-heat the water set their water heater to 140 degrees. Elderly households or those with young children may choose to keep the thermostat set at 120 degrees Fahrenheit. BabyCenter.com states that “it takes just two seconds for a kid to acquire third-degree burns from water that is 150 degrees and five seconds if the water is 140 degrees, the temperatures at which hot water heaters frequently leave the manufacturer.” It is recommended that the hot water temperature be maintained at 140 degrees in homes with people who have a compromised immune system or respiratory problems. Because there is less demand for hot water and hence less money spent on hot water, many people who live alone prefer a lower temperature within an acceptable range. When it comes to those who live in big households, many choose a higher temperature in order to handle the increased need for hot water. In order to save money, every 10 degrees you lower the temperature of the water tank thermometer results in a 3 to 5 percent reduction in your energy bill. Are you still undecided? To begin, set the temperature to 120 degrees Fahrenheit and gradually raise it in small increments until you reach the desired shower temperature.
What’s Your Current Temperature Setting?
Check the temperature setting on the water heater (if one is available) or take a temperature reading from the faucet to determine what it is currently.
After turning on the hot water faucet, allow it to run for a few minutes before getting the temperature reading.
Solutions to Common Hot Water Tank Problems
Check the temperature setting on the water heater (if one is available) or take a temperature reading from the faucet to determine what it is currently set at. Allow for a few minutes of continuous running of the hot water tap before measuring the temperature.
Professional Plumbing Services
It’s possible that your hot water isn’t hot enough no matter what setting your water heater is set to. If you need assistance adjusting your water heater or troubleshooting any difficulties, call your local Mr. Rooter Plumbing at (855) 982-2028 or submit a request for a free estimate on our website. Not only does your water heater need to be “just perfect,” but so does everything else in your home. Find the ideal air temperature with the assistance of Aire Serv, a neighborly firm in your area.
What Temperature Should a Hot Water Heater Be Set At?
Possibly, your hot water isn’t hot enough no matter what temperature setting your water heater is set to. If you need assistance adjusting your water heater or diagnosing any difficulties, call your local Mr. Rooter Plumbing at (855) 982-2028 or submit a request for a free quote on the internet. There are several things that must be “just perfect” in your home, including your water heater. A corporation that cares about its community may assist you in finding the ideal air temperature. The preceding and next posts
Factors That Affect Hot Water Temperature Setting
These criteria are unaffected by the kind of piping you have (PEX, PVC, or copper), the method of heating the water (gas or electric), or even if you have a tankless hot water heater installed.
- In addition, the type of piping you have (PEX or PVC), how the water is heated (gas or electric), and even whether or not you have a tankless hot water heater have no effect on these variables.
Are you still undecided? To begin, set the temperature to 120 degrees Fahrenheit and gradually raise it in small increments until you reach the desired shower temperature.
What’s Your Current Temperature Setting?
Check the temperature setting on the water heater (if one is available) or take a temperature reading from the faucet to determine what it is currently. After turning on the hot water faucet, allow it to run for a few minutes before getting the temperature reading.
Solutions to Common Hot Water Tank Problems
If you’re concerned about pathogens in your hot water, as well as the possibility of scalding water, you might consider installing a hot water tank booster. This allows you to maintain your water at 140 degrees in the tank while mixing it with cold water to bring the temperature down to 120 degrees before it reaches the faucet. Having a hot water circulating system installed in your home might alleviate the problem of waiting for hot water to reach the faucet in a large household. This method circulates hot water slowly through the pipes in order to prevent it from cooling down before it reaches the faucet.
Professional Plumbing Services
It’s possible that your hot water isn’t hot enough no matter what setting your water heater is set to. If you need assistance adjusting your hot water heater or troubleshooting any difficulties, call your local Mr. Rooter Plumbing at (855) 982-2028 or submit a request for a free estimate on our website.
Not only does your hot water need to be “just perfect,” but so does everything else in your home. Aire Serv, a neighborly firm, can assist you in determining the optimal air temperature. Previous PostNext Post Previous Post
Risks Of Too High Or Too Low Water Heater Temperature
You might be wondering what temperature to put your water heater to. When you purchase a water heater unit, the temperature is typically set by the manufacturer. However, this does not rule out the possibility of having some control over its temperature. The good news is that you may set the temperature to a level that is comfortable for you while yet ensuring the safety of your family. Previous to this, we wrote an article in which we spoke about how the heat in your shower might suddenly vary.
The temperature of the device is important since it can have an impact on how well it performs.
Top Risks of setting your unit temperature too high
You might be wondering what temperature to put your water heater at. A water heater unit is normally pre-programmed when it is purchased from the manufacturer. However, this does not preclude you from being able to regulate the temperature of the machine. Good news: you have the ability to choose a comfortable temperature for your family while yet ensuring their safety. A few weeks ago, we wrote an article about how your shower’s temperature might suddenly fluctuate. For example, a malfunction with your water heater is one of the possible causes.
In this article, we will discuss the dangers of setting your water heater’s temperature too high or too low, as well as the optimal temperature for it to perform efficiently.
1. Scalding Accidents
Setting the temperature too high might result in scorching mishaps that result in burn injuries. According to the findings of a study on water heater temperature and attributes, many water heaters are frequently set at dangerously high temperatures. Several studies by the Centers for Disease Control and Prevention (CDC) have discovered that scald burns are the most common cause of injury in younger children. Every day, over 300 children between the ages of 0 and 19 are treated in emergency departments for burn-related injuries, with two of these children dying as a result of their injuries.
Accidents such as this may be prevented by allowing your water to flow for three minutes and then monitoring the temperature with a candy thermometer thereafter.
2. High electricity bill
Warning: Using a water heater with the temperature set too high will cause your energy cost to rise! According to the Department of Energy, standby heat losses from your water heater can cost you anywhere from $36 to $61 per year in energy savings.
The good news is that by lowering your thermostat, you may save anywhere from 4 percent to 22 percent on your annual energy expenditure. Lowering the temperature of your water heater can help to decrease standby heat loss, which is one of the reasons you have a high energy cost.
3. Lowers your unit’s service life
According to some sources, hot water can accelerate the accumulation of hard water mineral silt, particularly calcium carbonate, in the tank’s interior. It is possible that the buildup would cause corrosion in the water heater tank, which will result in a reduction in the estimated lifespan of the complete device. Leaks and polluted water might occur as a result of the rust accumulation in the storage tank. Another major reason for water heater failure is the deposit of rust on the interior of the heater.
We wrote an essay about why it’s important and how you can extend its lifespan.
Risk of setting your unit temperature too low
If you want to save money on energy costs, you should avoid setting the temperature of your unit too low. It is possible that you will have a health problem as a result.
1. Legionnaires disease
Every year, around 100 people in the United States are sent to hospitals due to a form of bacterial illness that can be caused by water heaters. The infections connected with the bacterium were responsible for up to 12 percent of the country’s death rates. Specifically, the Legionella bacteria are responsible for this particular kind of atypical pneumonia. It is common to find this bacterium in water at low temperatures — often between 20 and 45 degrees Celsius. You can contract the disease if you inhale small water droplets in the air that contain germs that cause it.
Evidence indicates that the majority of the bacteria’s spread occurred through the provision of drinking water in private residences.
It has been shown that the danger of contamination is significantly reduced when water heaters are set at 60°C or 140°F.
Ideal Temperature For Your Water Heater
The optimum temperature is. What several agencies have to say about the optimal temperature is summarized below: According to the Occupational Safety and Health Administration (OSHA) and the World Health Organization (WHO), water heaters kept below 60 degrees Celsius (140 degrees Fahrenheit) may promote Legionella development. This temperature, on the other hand, will almost certainly increase the likelihood of being burned by searing hot water. If you have young children at home, the Centers for Disease Control and Prevention (CDC) and the Energy Department recommend that you set your water heater’s thermostat to 120°F or lower.
This will help you keep control over the water temperature throughout your home, preventing it from being overly hot.
So, is it 120°F or 140°F?
We recommend keeping the temperature between 120 and 140 degrees Fahrenheit. However, you may regulate the temperature of your water heater between 130 and 140 degrees Fahrenheit, which is very useful for large water heaters used in hospitals and industrial settings.
In case you have little children at home, set the temperature to 120°F, which is considered safe by the majority of the population.
Your installer can help you adjust your water heater temperature.
As part of our service, our qualified specialist at SPS Plumber can assist you with setting the temperature of your water heater to the proper setting. In addition, we can do annual water heater maintenance on your unit. To schedule an appointment, please call us at 408-622-8183 (South Bay Area) or 209-597-9107 (Central Valley) right away!