How To Hide A Hot Water Heater

4 Ways to Hide that Unsightly Water Heater – Decorative Cover Ideas

Please keep in mind that this content may contain affiliate links. This means that, at no additional cost to you, we may gain a small profit on purchases made via our links. It might be difficult to figure out how to conceal a water heater, but there are a number of options available for making your tank invisible.

The Three Keys of Water Heater Storage

Consider the following three aspects when selecting a concealment method: appearance, cost, and long-term dependability (durability).

Aesthetics

The more popular a room is, the more crucial it might be to make the water heater fit in with the surrounding decor and furnishings. Try to visualize how the final project will appear, and always search for materials that will blend in with the surrounding environment rather than making the tank’s position stand out like a sore thumb.

Cost

For many people, this is the most critical thing to consider. Costs might range from extremely low (curtains) to quite high (furniture) (cabinets). This component should always be addressed last since it is the sole factor that is regarded in the short term.

Durability

This component, like aesthetics, becomes increasingly significant the more popular a place becomes. A flimsy curtain would suffice for an unfinished basement or a garage that is primarily used for storage, but a finished basement or kitchen will require something that can withstand some abuse and is durable.

Water Heater Covers

There are a plethora of excellent water heater cover options available, but the most of them fall into two categories: curtains and screens. These may be used to conceal the water heater without needing extensive remodeling work, and they are particularly well suited for use in laundry rooms, partially completed basements, and garages.

Curtains

The most straightforward method of concealing your furnace and water heater is to use a sliding curtain as a partition. You will need to measure the height of the wall in order to establish the appropriate curtain length, as well as the required curtain width. Make sure to leave at least a few inches of space between the curtain and your heater. After that, rails are attached along the ceiling from which the curtain would hang. Curtains aren’t the most visually appealing window treatments for busy spaces, but they’re perfect for the garage or a partially completed or unfinished basement, for example.

Screens

When it comes to choosing a stylish water heater cover, screens are the obvious choice. These dividers can be either tall standing shutters or typical divider screens, depending on the situation. Screens are lightweight and portable due to their freestanding nature. Colored paper or paint can be applied to the structures, or the structures can be left in their natural state.

Water Heater Enclosures

You should consider installing a full enclosure around your water heater if you want to conceal it in a finished basement, kitchen, or busy laundry area.

Using closets and cabinets to conceal the heater is a great approach to do it in a more permanent and aesthetically pleasing manner.

Cabinets

When you want to conceal your water heater in a completed basement, kitchen, or busy laundry area, it’s usually best to build a complete enclosure around it. Using closets and cabinets to conceal the heater is a great approach to do it in a more permanent and visually appealing manner.

Closets

When you want to conceal your water heater in a completed basement, kitchen, or busy laundry area, it’s frequently better to build a complete enclosure around it. Closets and cabinets are wonderful options for concealing a heater in a more permanent and aesthetically pleasing manner.

Comparing Closet Hiding Methods

Hiding Method Durability Best Rooms Worst Rooms
Cabinet High Basement (finished)Garage (workspace)Kitchen Unfinished BasementGarage (storage-only)
Closet High Basement (finished)Bedroom/OtherGarage (workspace)Kitchen Garage (storage-only)
Curtain Low Basement (unfinished) Basement (finished)Kitchen
Screen Low/Moderate Basement (unfinished)Garage (storage-only) Kitchen

When you want to conceal your water heater in a completed basement, kitchen, or busy laundry area, it’s frequently better to build a whole enclosure around it. Closets and cabinets are wonderful options for concealing the heater in a more permanent and aesthetically pleasing manner.

How to Hide Your Ugly Water Heater

Please note that the water heater featured in this post is electric. It has been brought to my attention that this might cause a fire hazard with gas water heaters. I’m not familiar with gas water heaters or the safety measures that should be taken while using one of these appliances. As a result, before embarking on this project, seek expert advice to determine whether it is appropriate for your particular use. Compliments are always appreciated, don’t you think? They have the ability to completely alter the course of events.

  • “Who do you think I am?
  • *flips it around the back of my neck* * Why, thank you very much!
  • Has anybody ever expressed appreciation for your hot water heater?
  • Really?
  • Do you think it’s because it’s a tiny bit little sort of possibly.um.UGLY, or something else?
  • I mean, it’s simply in the nature of the beast.
  • The fact is, neither I nor you have a very attractive one.

(Even though the tankless ones are far more appealing than the huge ones with tanks.they are also significantly more expensive.) As a matter of fact, my middle name is “cheap.” No, not in the traditional sense.

However, it could as well be inexpensive.) Despite their obnoxious appearance, we must take a moment to appreciate what a water heater is capable of accomplishing.

That’s a big thing, to be honest.

Most people didn’t have access to electricity, and the ground was completely coated in ice.

After three days, I’d had enough and needed to take a shower regardless of whether or not there was hot water available.

That’ll make you love your water heater even more.

We can’t just throw them away because they’re unattractive.

Moreover, guess what?

Here’s how to create a water heater cover from scratch.

It’s easily detachable for rapid access in the event of a leak that requires immediate attention.

I’m afraid I won’t be able to provide you specific measurements because everything will depend on your individual application.

My water heater is a tall and slender figure.

The images below were taken during the time I produced that particular piece.

First, I cut four 1x4s for the “legs” of the structure.

After that, I cut four short pieces of 14-inch plywood.

Using your Kreg Jig –affiliate link–, you will need to drill pocket holes in them, just like the photo below illustrates.

After that, I grabbed some luan (which is essentially inexpensive 1″ plywood) and cut two pieces to fit inside the frames using a miter saw.

It is necessary to have some overlap in order to staple or nail them down.

If you choose, you can substitute cloth for the luan if you so desire.

Either option is acceptable for concealing the heater.

I used pocket screws to attach the two panels together on the wall.

At this moment, you have two choices in front of you.

However, if you have the room for an additional leg, I would recommend putting it in for support.

To make the extra leg, I cut another 14 that was the same length as the other legs, as well as a shorter 14 that was the same length as the frames.

You may now finish by adding the top.

Use plywood or boards to support the extra leg if you were successful in doing so.

For the top, I used a nail to secure them in place.

It’s now ready to be painted or stained, or you can simply leave it unfinished.

Everything is as simple as setting it in position.

By simply placing it in position, it makes it simple to remove in the event that you need to get to your heater.

(PS: If you like what you see here, make sure to check out my whole laundry room renovation).

As a matter of fact, it’s become one of my favorite spaces in the house. Then, what exactly are you waiting for?! Get into the building—you’ve got a water heater to conceal! Do not forget to save this for later!

4 Ways to Hide Your Water Heater (& 3 Outdoor Options)

Disclaimer: The electric water heater seen in this post is not included in the price of the item. With gas water heaters, I’ve been advised that this might be a fire danger. Water heaters that run on natural gas are unfamiliar to me, nor are the safety measures that must be taken while using them. In order to determine if this project is safe for your particular use, please consult a specialist before proceeding. It’s always wonderful to receive compliments, isn’t it. These people have the ability to completely alter the course of history.

  • “Who do you think you are?
  • Isn’t that gorgeous hair?” she says.
  • When was the last time you received a praise on your hot water heater?
  • Really?
  • Do you think it’s because it’s a tiny bit maybe sort of possibly.um.UGLY, or is it something else entirely?
  • Just the way things are with beasts.
  • Despite their functionality, water heaters are unsightly items to have around.

A “beautiful” water heater is not something that anybody possesses.

(Despite the fact that the tankless models are far more appealing than the huge models with tanks.they are also significantly more expensive.

That isn’t entirely true, either.

Nonetheless, it may as well be inexpensive.

That is to say, it warms up our water supply.

The state of West Kentucky (where I grew up) was hit hard by an ice storm some years ago, when I was still in school.

For days, we were without hot water (due to a power outage).

Ever had a shower so cold you could see your breath after getting out of it.

All of this is to suggest that our water heaters perform a critical function in our lives.

However, we have the ability to hide them.

You’re right.

A water heater cover can be made in the following way: Another surprise is that there is a third surprise as well.

Danny would have to double-check that this was an absolute must.

You will need to examine the amount of space you have around your heater as well as the size of your heater.

We refurbished our laundry room last year, and I didn’t take any photographs of myself creating it, but I recently created one for a friend, and hers was a short, fat water heater.

In order to construct the “legs,” I first cut four 1x4s.

Afterwards, I chopped four 14-inch sections into four short ones.

Using your Kreg Jig (affiliate link), you will need to drill pocket holes in them, as seen in the image below.

Afterwards, I cut two pieces of luan (which is essentially inexpensive 1″ plywood) to fit inside the frames using a miter saw.

It is necessary to have some overlap in order to staple or nail them on properly.

Fabric can be used for luan if it is what you like.

To conceal the heater, any option is sufficient.

A pair of pocket screws were used to join two panels together.

It is at this time that you must choose between two courses of action.

However, if you have the space for an additional leg, I would recommend putting it in for support.

A 14-inch piece of wood the same length as the other legs and a shorter 14-inch piece of wood the same length as the frames were cut to make the additional leg.

Add the top now if you’d like.

Use plywood or planks if you were successful in adding an additional leg.

For the top, I used a nail to secure them.

It’s now ready to be painted, stained, or left unfinished if you want.

It’s as simple as putting it in place.

When you simply sit it in position, you make it simple to remove in the event that you require access to the heat source.

See also:  How Much Does It Cost To Have A Water Heater Installed

(PS: If you like what you see here, make sure to check out my whole laundry room renovation) As a matter of fact, it’s now one of my favorite rooms in the house.

So, what exactly are you waiting for? Hurry up and go into the building–you have a water heater to conceal! Do not forget to pin this for later use.

  • Install a decorative screen or room divider to conceal it
  • Place your water heater in a closet
  • Or construct a cabinet enclosure to conceal it.

The size of the water heater will determine which option you will select. They may contain anything from 20 to 120 gallons of water, with the majority of houses having a 50-gallon water heater. You will learn how to conceal your water heater in the next sections of this article.

How to Enclose a Water Heater?

When it comes to enclosing your water heater, you must decide whether you want a total enclosure or whether you prefer a partial or moderate amount of coverage.

1. Curtains are a Budget-Friendly Option

A curtain is still the most straightforward and straightforward method of concealing your water heater. The curtain serves as a separator and has the ability to be moved to the side. All you’ll need is a long curtain, a curtain pole, and curtain hooks to complete the look. In most circumstances, you can complete this task for less than $20. Depending on your interior design, the curtain can be either ornamental or basic. Some folks even opt for a plain piece of clean cloth as a substitute. It is necessary for the curtain to run from top to bottom in order to function properly, but it cannot be flush against the heater.

Choosing to do so is an option if you live in a rental flat because it may be taken down when you relocate.

2. Incorporate a Screen or Room Divider

Due to the fact that they do not completely surround the water heater, these solutions are more like coverings. Generally speaking, there are two types of water heater covers. Curtains or screens are used to cover the windows. A simple screen may do wonders in terms of keeping the water heater out of sight from the general public. Because ornamental displays might draw attention, you might choose a more straightforward screen. Contrary to curtains, which people associate with seclusion, elegant screens draw attention and compel others to examine them since they appear to be a part of the furniture itself.

Room dividers and screens are simple to install and reasonably priced.

3. Build a Closet

Because they do not completely surround the water heater, these choices function more like coverings. Generally speaking, there are two types of water heater covers: Curtains or screens are used to separate rooms. In order to keep the water heater out of sight, a simple screen may do wonders. Because ornamental displays might draw attention, you may choose a more straightforward screen. While curtains are associated with privacy, elegant screens draw attention and compel people to examine them since they appear to be an integral part of the furnishings.

It is preferable to set screens or room dividers in areas with low human activity, such as the laundry room or the basement, in order to make them effective. They’re simple to put together and are rather inexpensive. And they’re more durable than curtains, which is a plus.

4. Build a Custom Cabinet

Cabinets are more discrete than closets since they are smaller. They become a little more adaptable in terms of where they may be placed without being an eyesore as a result. An unfinished basement or a kitchen are both suitable locations for cabinets, which can be either recessed or freestanding. Although a hardwood cabinet is available for purchase, many individuals choose to utilize an all-metal unit instead. They are long-lasting, and they make greater use of available space. You may even build a water heater cabinet that you can store in a closet for further security and safety.

Other Options to Make Your Water Heater Less Noticeable

It is possible to install the water heater outside. However, you will have to pay for the construction of the structure that will contain the water heater. You will be responsible for the cost of the plumbing and piping system that will connect the outside heating enclosure to the house. Decorative outdoor water heater enclosures may be placed on your patio, deck, or garden as a focal point. The good news is that having the outdoor structure allows you to free up a significant amount of floor space within your home.

  • Tank water heaters should only be used indoors, not outside.
  • Steel Enclosure for the Outdoors It is possible to have the heater incorporated into the wall in order to keep it out of sight.
  • This is a notion that is recognizable to those who work in commercial buildings or hotels.
  • The primary difficulty with this scenario is that any damage to the heater might cause the wall to become unstable without you even realizing it.
  • Consider this a reverse closet, in which the water heater is housed in an internal closet but the door is located on the exterior of the building.
  • Outdoor tankless water heaters operate on a gas-fueled burner system that heats water immediately when the faucet is turned on.
  • Consequently, cold water enters the tank by a dip tube, where it is heated and stored until the hot water tap is turned on.

With a tankless water heater, you can have hot water on demand rather than having to wait for it to be heated in the tank. A tankless water heater is an excellent choice for a small area. Tankless water heaters are available in a range of configurations, including electric and gas.

What to Consider When Hiding Your Water Heater

When it comes to concealing an unattractive water heater, it’s always vital to think about the aesthetics of the situation first. You should take care to verify that the enclosure is not visible, poor, or untidy before using it.

2. Safety

Check to verify that the enclosure is safe before entering. No sharp edges or corners should be present, as they might be dangerous in the workplace. In addition, if the enclosure is going to be outside, it should be weatherproofed. The materials that you employ in the enclosure’s construction should not come into contact with the water heater and should allow for easy access to maintain it. In order to ensure proper clearance between the heater and the enclosure, a 12-inch space should be maintained.

The water heater is almost always located in the basement of the house where it was built.

For gas water heaters, outdoor steel enclosures are a popular choice since they are weather resistant and provide access to the vent flue from the top of the enclosure.

3. Plumbing

Perform sure that the pipes going to the water heater are disguised but yet easily accessible in case you need to make plumbing repairs if you decide to create a bespoke enclosure.

4. Cost

Choose a pre-fabricated enclosure that is strong enough to resist the weather if you do not want to build one from scratch. Outdoor enclosures are often more expensive than interior enclosures, mostly due to the fact that the materials used to construct the enclosure must be weather-resistant. The good news is that concealing an unsightly water heater does not have to be a costly endeavor. Choose a curtain or screen rather than an enclosure and you will save a significant amount of money on your project costs.

You can build a screen at a reasonable price using inexpensive panels.

A closet or cabinet does not have to be expensive to be functional.

5. Accessibility

When concealing a water heater, it is vital that it be easily accessible. In the event that you are without hot water, you should be able to get to it for water heater maintenance or to make repairs.

6. Location

Another significant element to consider is the location of the business. A water heater may not be permitted to be installed within a condominium complex, for example. Because most condominiums do not require huge tanks, low-boy design tanks are commonly used. Low-boy type units may also be used in kitchens and laundry rooms since they fit under the cabinetry.

Choose a position that is close to the kitchen and bathrooms so that hot water can be delivered to these areas as quickly as possible. The greater the distance traveled by the hot water, the longer it will take for the tap to get hot.

7. Durability

The material you chose should provide you with a reasonable number of years of service. That is one of the reasons why most homeowners prefer outside steel enclosures. It is recommended that you use treated or decay-resistant wood when constructing an outdoor wood enclosure, as well as to paint the enclosure.

Conclusion

Keeping the water heater hidden It’s acceptable if you do it with the proper materials, in the proper location, and with the assistance of a professional. However, because many people do not adhere to construction code standards or utilize low-cost materials, the procedure is frequently viewed as a curse by others. When some people decide to take on a DIY project, they often end up ruining it and being stuck with an eyesore of a cabinet or closet in the most visible locations. It is generally recommended that you hire a professional to correctly enclose your water heaters.

Sources: Some Practical Guidelines for Hiding Your Water Heater in Your Home How to Install a Water Heater Enclosure DISCLAIMER: The information provided on HomeInspectionInsider.com is not intended to be professional advice.

It is owned and operated by Hubert Miles who is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by placing advertisements and links on their websites that direct traffic to Amazon.com (hereinafter referred to as “Amazon.com” or “Amazon.com Associates Program”).

Hubert Miles receives a commission for recommending visitors and commerce to these businesses.

DIY Ways to Hide Your Ugly Water Heater

Yes, it is true that your water heater is not the most visually appealing item in your home. Your family, on the other hand, is really grateful for it when it comes to its utilization. Why not look for methods to make the room more visually attractive while also eliminating the eyesore? There are a plethora of do-it-yourself options for concealing your unsightly water heater! Keep in mind that items should never be placed too near to water heaters, as this can block ventilation and create a potential fire hazard.

Curtain Covers

You can cover your unsightly water heater with this simple solution that takes only a few minutes to complete. Simply install a curtain rod and a curtain that is long enough to reach from floor to ceiling and touch. If servicing is required, you won’t have to worry about being unable to use your computer because of this rapid patch.

Faux Cabinets

If you already have cabinetry near your water heater, you can simply add a few false cabinets to extend the length of the cabinetry past the water heater.

This will allow for optimal mobility throughout your room and will also eliminate the eye ache completely! Even if you don’t already have cabinets nearby, it’s simple to construct a fictitious cabinet to go around it. You may stain or paint the cabinet to fit the color scheme of the space!

Room Dividers

Room dividers are an extremely simple and virtually painless option to conceal an unsightly water heater. Simply installing a stylish room divider can do the trick in minutes. The items mentioned above may be found at practically any home or design store. Simple as taking the divider out of the box and putting it up on its own, voila! It’s simple and painless!

Plantation Shutters

Plantation shutters are a simple and inexpensive method to add texture and beauty to any room in your home. Shutters can be hinged and custom-built to fit certain openings. The use of hinged shutters also ensures that the space remains conveniently accessible. In addition to ensuring that the space is still accessible, the gaps in the shutters will also ensure that sufficient air movement is maintained.

See also:  How To Raise Temperature On Water Heater

Pallets

Pallet this and pallet that are now popular on Pinterest. So why not use a little bit of it to cover over an unsightly water heater? In terms of hiding this enormous piece of equipment, there are several pallet solutions available on Pinterest. A beautiful shelf and other creative items, such as those seen in the image below, can be added as well. Hopefully, after seeing a few different DIY water heater concealment options, you’ll feel more confidence in implementing some of them in your own house!

BELOMAN has been in business in the Metro East for more than 60 years.

In Illinois, we are the most trusted name in home comfort.

Hide An Unsightly Water Heater

When I was planning my laundry room redesign, there was one thing that was at the top of my priority list: a new sink. Hide a water heater that is unattractive. I suppose you could say that while we were building our house, we could have done a better job of planning ahead of time. We had this unsightly tankless water heater hanging out in the center of the wall before we even realized it. My laundry room was filled with nothing but that awful stuff every time I glanced in there. I suppose I should be happy that it was a tankless water heater rather than a traditional one.

Hide an unsightly water heater:

In the course of planning my laundry room renovation, there was one thing that was at the top of my priority list. Make a water heater that is unattractive more discrete. When it came to building our home, I suppose you could argue that we could have done a better job of planning ahead. We had this unsightly tankless water heater smack dab in the center of the wall before we even realized it. Everything in my laundry room reminded me of that nefarious creature every time I went in there. Perhaps I should be thankful that it was a tankless water heater rather than a traditional one.

GET YOUR FREE GUIDE to 30 DIY projects that can be done over the weekend!

By subscribing, you will receive instant access to my FREE guide, which contains 30 DIY projects that can be completed in a single day or over the course of a weekend!

In addition, you will receive a weekly email with some of my favorite design tips, tactics, and inspiration.

How to Hide a Water Heater

Documentation Download Documentation Download Documentation There are several methods to conceal a water heater if it is visible from the rest of your room, but there are a few that are very attractive. In the case of a straightforward solution, a room divider may easily be used to obscure your view of the water heater. Curtains draped from your ceiling can also serve as a light and inexpensive alternative to blinds. Building a cabinet around your water heater not only helps to keep it hidden, but it also provides you with an additional shelf of storage.

  1. 1 Take the height of your water heater into consideration. Start at the bottom of your water heater and stretch your measuring tape all the way up to the top of the water heater to get the whole height of the water heater. If you wish to conceal any pipes that reach up and out from the top of the water heater, make sure to include the height of those pipes as well. To ensure that you do not forget your measurement, write it down as soon as it is taken.
  • Additionally, you may measure the width and depth of the water heater, although these measures are not as critical as the height because you can modify the length of a room divider.
  • 2 Purchase a room divider that allows you to totally conceal your water heater. Find multi-panel room dividers that are the right size for your area by visiting a local home goods store or shopping online. Look for a cabinet that is tall enough to cover the water heater and has the ability to wrap around the edges of the cabinet. Make an effort to pick a separator that complements the style of the rest of the room so that it does not stick out or appear out of place in your space.
  • If you are unable to locate a room divider that is large enough to entirely conceal the water heater, you may need to purchase more than one. Room dividers may be constructed from a variety of materials and in a variety of styles. Choose the one that best suits your needs and available space.
  1. In the event that you are unsuccessful in your search for a room divider that can fully conceal the water heater, you may be forced to purchase more than one unit. They are available in a variety of materials and may be customized to suit your needs. Make a decision on which one best suits your needs and space.
  1. 1 Take measurements for the water heater’s width and depth. A tape measure should be extended from one wall until it reaches the outer border of the heater. (See illustration.) Measure the distance between the curtain and the water heater and add around 4 to 5 inches (10–13 cm) to it so that the curtain has some room between it and the heater. Take the depth measurement from the second wall behind the heater to the point where it reaches the furthest out from the wall. A buffer of 4–5 inches (10–13 cm) should be added to the measurement to account for errors.
  • Install your curtain so that it does not come into direct contact with the water heater, since this might provide a fire threat.
  • Calculate the height of your ceiling in steps two and three. To measure from the floor near your water heater to the ceiling, start at the bottom of the tape measure and draw it straight up. Make certain that the measuring tape is absolutely vertical, otherwise your measurement will be incorrect. Make a note of your measurement so that you don’t forget it and so that you know how long your curtain should be. 3 Purchase ceiling curtain track that is the same length as the combined width and depth of the room’s windows. With a curtain track, you may hang a curtain from the ceiling, and it is made of metal. Purchase a piece of track to be installed directly on your ceiling that is the same length and breadth as the measurements you measured before. To have your drape completely wrap around the water heater, make sure to purchase angled corner portions of track as well.
  • Curtain tracks can be purchased at home improvement stores or online. If you are unable to get the precise length that you want, you can cut the track to size with a hacksaw.
  • 4Another option is to screw a piece of curtain track to the ceiling. Placing the end of the first track portion against the wall such that it stretches out past your water heater will be the most effective solution. Check to see that the track on the ceiling is not misaligned before inserting screws into the holes along its length. Make use of an electric screwdriver to tighten the screws and ensure that the track remains in position. When screwing into drywall, use anchors first to prevent the track from falling out of position
  • Otherwise, use screws to hold the track in place. 5 Attach the curtain hooks to the first piece of track by sliding them on. Make certain that the curtain glider hooks you use are the same width as your track. Push the hook’s round end into the track and slide them all the way to the finish. Immediately attach as many curtain hooks as you require for your curtain, as it becomes more difficult to attach hooks to track after you finish the remainder of the track.
  • Curtain glider hooks can be purchased at home improvement stores or on the internet. Hooks are available in a variety of sizes and designs. Purchase hooks that are the same color as the hardware in the rest of your room so that they don’t stick out as much.
  • 6 Complete the installation of the remaining curtain track. Ensure that the tracks on the ceiling completely encircle your water heater before installing them. Hold the track pieces up against the ceiling and insert screws into the holes along their whole lengths to complete the installation. Before using your electric screwdriver to secure the ends of the track in place, make sure they are aligned with the component you previously placed.
  • In the event that your curtain needs to wrap around a corner, you may need to utilize an angled piece of track.
  • 7 From the curtain hooks, hang a floor-length curtain. Purchase a curtain that is the same height as your ceiling so that you can conceal the entire water heater unit from view. Make sure that the hooks are positioned at the upper border of the curtain and that it is stretched out along the track. Following the installation of all of the hooks, move the curtain along the track to cover your water heater.
  • Purchase a curtain that is complementary to the other types in your space so that it does not stick out or clash
  • Even if your curtain is a little bit taller than you require, it is quite OK since you can reduce it using hem tape.
  1. To avoid standing out or clashing, choose a curtain that fits the other styles in your space. Even if your curtain is somewhat taller than you require, it is acceptable since you may reduce it with hem tape.
  • Using the example above, if the cabinet’s measurements are 50 by 18 by 18 inches (127 by 46 cm), you’ll need 5 parts that are 50 inches (130 cm) long, 3 pieces that are 18 inches (46 cm), and 2 pieces that are 18 inches (46 cm)
  • This cabinet is intended for use in conjunction with a water heater that is located in the corner. If your water heater isn’t in a corner, you’ll need 6 pieces that are the same height as the water heater, 4 pieces that are the same width as the water heater, and 2 pieces that are the same depth as the water heater.
  • 3 Assemble the boards into two rectangular frames for your cabinet using the glue and nails. 2 boards for the height of your cabinet and 2 boards for the width of your cabinet should be laid out perpendicularly between them. Check to see that the length of the top board is flush with the end of the board on the side of the table. The second board should be 3–4 inches (7.6–10.2 cm) apart from the bottom of the side pieces when they are assembled. To construct a rectangle frame with two legs protruding from the bottom, screw the components together with a screwdriver. Carry on using same procedure for the other frame piece.
  • If you’re using a gas water heater, make sure there’s enough space between the bottom of the board and the floor
  • Otherwise, a buildup of hazardous gas might occur. These frames are designed to fit around a water heater that is located in the corner of a room. If your water heater isn’t in a corner, you’ll need to create three frames instead.
  • 4 Plywood should be used to cover the broad central part. After you’ve finished assembling the frame, measure the inner window of each panel and add 1 inch (2.5 cm) to each side of the measurement. Using a handsaw or an atable saw, cut pieces of 1 4 inch (0.64 cm) plywood to the desired size. Place the panel on one side of the frame and staple it to the plywood along the perimeter of the panel. Maintain the integrity of the edge by placing staples every 2 inches (5.1 cm) throughout the length of the edge
  • If you want your cabinet to have a more beautiful appearance, you may also use fabric.
  • 5 Using the corner screws, join the frames together to form an L-shape. Placing the frames upright on their legs and arranging them so that they create a straight angle is the first step. To ensure that the wood parts do not move, clamp them together using clamps and then screw them together. A screw should be placed every 4–5 inches (10–13 cm) to ensure that the cabinet doesn’t come apart.
  • If your water heater is not in a corner, you may build a U-shape out of your cabinet by adding a third frame to it.
  • Make use of pocket holes if you don’t want the screws to be visible once the project is completed. 6 Add a rear support leg to the back of your cabinet. Install an angle bracket to the top corner of the cabinet and clamp the final short piece to it to keep it in place. The last long piece of wood you cut is used to attach itself to the end of the short piece of wood so that it is secured in place. When the cabinet is constructed, the second leg will provide more stability, allowing you to place greater weight on top of it.
  • Even if you don’t want to use an additional leg, you should avoid storing heavy objects on top of the cabinet. If you’re building a cabinet with three sides, you don’t need to include an additional support leg.
  • Even if you don’t want to add an additional leg, you should avoid storing heavy objects on top of the cabinet. If you’re building a cabinet with three sides, you shouldn’t include an additional support leg.
  • Make certain that the top of your cabinet does not come into contact with any pipes, otherwise it may not fit well in the area.
  • 8 To conceal your water heater, slide the cabinet over it from above. Make sure the open end of the cabinet is towards the water heater and that the two paneled sides of the cabinet are facing out. Continue to slowly lift your cabinet over the water heater. The boards or plywood you placed on top of the cabinet may be used to create a shelf to hold goods in the room
  • Consider the following scenario: if your water heater cabinet is in the laundry area, you might want to place detergents and washing supplies on the top shelf.
See also:  How Much Is A Gas Hot Water Heater

Inquire about something There are 200 characters remaining. Include your email address so that you may be notified when this question has been resolved. SubmitAdvertisement Thank you for submitting a suggestion for consideration!

  • It is not recommended to totally shut off a gas water heater since this might result in a buildup of dangerous gas. To avoid any potential fire concerns, avoid placing a room divider or curtain directly against a water heater.

Advertisement

Things You’ll Need

  • Cutting tape
  • Ceiling curtain track
  • Electric screwdriver
  • Curtain hooks
  • Floor-length curtain
  • Measuring tape
  • Measurement tape, ceiling curtain track, electric screwdriver, curtain hooks, and a floor-length curtain

About This Article

Measuring tape; ceiling curtain track; electric screwdriver; curtain hooks; floor-length curtain

Did this article help you?

You’ve grown tired of staring at your obnoxious water heater. Do you think it detracts from the overall look of your home? Water heaters are a fantastic piece of engineering. Water heaters, on the other hand, do not have a fashionable appearance, unlike many other modern equipment. It was 1868 that the first water heater was invented, and the aesthetics haven’t altered much since then. The environment in which we live should be pleasing to the eye and comfortable to inhabit. However, because we are unable to prevent the installation of an unsightly but necessary water heater, our best alternative is to conceal it.

Five Different DIY Water Heater Covers

We’ve gathered all of the knowledge you’ll need to protect your water heater both successfully and stylishly in our research. The following are the most widely used and successful remedies.

1.Curtains

  • Basements or garages that are exclusively used for storage work best in this situation.
  • Kitchens, completed basements, and bedrooms are the worst places to get mold.

Kitchens, completed basements, and bedrooms are the worst places to live.

2.Room Dividers

  • It works well in: unfinished basements or a garage that is only used for storage.

Another inexpensive and extremely simple technique for concealing your water heater is to use a room divider. The only thing you have to do is pick the one you want and set it up; everything else is taken care of. The majority of them are imported from Asia, and the variety appears to be limitless. There are many different materials to pick from, including wood, cloth, and glass. In addition, there are portable, fixed, collapsible, and even hanging and roll-up models available to choose from.

Room dividers are inexpensive, but you may not want to put them on display.

3.Pallets

It is due to their extraordinary versatility that pallets have grown increasingly popular in recent years. They can be used as tables, shelves, or organizers, depending on their size. They may, however, also be used to cover a water heater if necessary. Because pallets are constructed of wood, you’ll need to utilize the boards that came with them to construct your cover. Then, using a hammer, pound the boards together to form a barrier in the place you want to conceal. It will have the appearance of a rustic room divider, but it will be far less expensive because pallets may be discovered as free scrap material.

You should avoid placing your pallet screen in the most heavily used areas of the house unless you can find a method to incorporate it with the existing furnishings. Pallets are in the middle of the road in terms of appearance and durability, and they are certainly the most affordable option.

4.Faux Cabinet or Closet

  • Finished basements, bedrooms, kitchens, or a garage that doubles as a work space are the best places to put this.
  • The worst places to have a leak are unfinished basements or garages that are solely utilized for storage.

A false cabinet or closet is one of the most popular solutions since it is both functional and attractive. If you already have a structure in place, such as a closet, adding an extra door will seem natural. No one will suspect that it is being used to conceal a water heater. If you wish to develop your own version of this solution, you will need some technical knowledge. If you enjoy working with wood, you should give it a shot. It is also a more permanent solution when compared to other options such as curtains or room partitions.

Therefore, you may think of it as a one-time investment.

While imitation cabinets or closets are more attractive and durable than real cabinets or closets, they are more expensive.

5.Plantation Shutters

  • Finished basements, bedrooms, kitchens, or a garage that doubles as a work space are the best places to put this.
  • The worst places to have a leak are unfinished basements or garages that are solely utilized for storage.

Unfinished basements or garages used just for storage are the worst places to have a flood.

We’ve Got You Covered

The worst places to have it: unfinished basements or garages that are primarily used for storage.

Some Useful Tips For Hiding Water Heater In your Home

If we are talking about our homes, water heaters are without a doubt an absolute necessity. These facilities supply hot and clean water for a variety of applications throughout the harsh winter months. When installing a concealed water heater, there are a few considerations that must be taken into consideration. They have the potential to become a major eyesore and detract from the overall attractiveness of your property. Spending hundreds or even thousands of dollars on your finest tankless water heater will be wasted if they wind up being an eyesore in your home.

  • The procedure, however, must be carried out with care so that the efficiency and functioning of the water heaters are not adversely affected.
  • Getting the Fundamentals Right When it comes to concealing your water heater, it’s critical that you get the fundamentals right the first time.
  • Before you purchase a water heater, you should ask yourself a few simple questions.
  • This will assist you in devising the most appropriate strategy for concealing the water heater from plain sight without impairing its efficiency or undermining the reason for which it is being employed.
  • This is something that should be considered before to the construction of the house.
  • A Cloth or a Pegboard Screen Can Be Used If you take a look around, you may find a variety of choices for concealing the water heater.
  • Your approach for hiding the water heater should be failsafe, practical, and workable from an overall perspective over time.

However, in the majority of situations, these suggestions are at best temporary solutions.

A closet might be used for this purpose.

This might be covered in shiplap to make it more in keeping with the general theme of the room.

It may have the appearance of a covert hiding place that youngsters could utilize while they were playing.

Choosing a Tankless Water Heater The next best choice could be to invest in a tankless water heater instead.

Also necessary would be the installation of a cabinet door, without which the space would continue to seem shabby.

This is something you may learn from manyrinnai tankless water heater reviews to help you have a better understanding of.

If at all possible, keep it outside the house.

Even though this may be a costly idea, it may be worthwhile to give it some serious consideration.

The pipe and plumbing system will very definitely require more expenditures, but once completed, the kitchen or bathroom will almost certainly be a considerably more attractive location to be in terms of appearance.

You will, however, need to select the appropriate technology and determine whether you want to use an infrared sauna or a regular sauna as a treatment option.

Make an attempt to construct it within the walls.

However, you might be astonished to find hot water gushing out of the numerous faucets as you go about the house.

This, however, is done with care to guarantee that the heaters may be removed as and when they are required for repairs or even replacement as necessary.

They could have camouflaged walls put on wooden doors, and the finish would be so beautiful that it would be hard to tell that this is the location where the water heater has been repaired with the naked eye.

Keep the following points in mind as you go about your attempt to achieve this goal: It is necessary to be cost-effective as well as practical, and it must not compromise the efficiency of the performance of these water heaters at the end of the day, failing which the primary goal of such camouflaging activities will be defeated.

Every situation is different, and the advantages and disadvantages must be carefully weighed against one another.

Her writing and research interests include a variety of do-it-yourself issues such as home improvement/interior design, health/fitness, and other related topics.

She is also working on her PhD thesis, which focuses on the theme of intelligent houses. A home decor designer who also blogs and has an online home décor business where she sells one-of-a-kind products created by local craftsmen and artists from nations along the old Silk Route.

Leave a Reply

Your email address will not be published.