Replace the water filter in your Samsung refrigerator
There are three different types of Samsung water filters, so you’ll want to be sure you’re getting the right one for your refrigerator before purchasing one. Replacement filters are available for purchase on ouraccessories page if needed. To begin, identify the filter in your refrigerator’s model. You should refer to your user handbook if you are unclear about the location. Then, on the filter itself, look for the model number printed on it. This will inform you of which of the following filter types you will require for your application.
If you’re not sure whether or not you need to replace the filter, look for an indication light on your refrigerator.
If you are about to replace the filter, the light will become purple to indicate that it is time.
You should alter the filter as soon as possible at this point.
- After turning off the water, identify the filter and clean it as needed. If you are unclear of where it is, please refer to your user handbook for assistance. Once you have unlocked the old water filter, remove its lid and swivel it counterclockwise to reinstall it. Afterwards, just pull it straight out of the filter housing to remove it. Prior to placing the new filter in the system, remove the protective cover from the top of the existing filter. Afterwards, insert it directly into the filter housing and turn it counter-clockwise
- Examine to ensure that the lock symbol corresponds to the indication line.
Types of HAFCU1 filters include:
- After turning off the water, identify the filter and clean it as needed. If you are unclear of where it is, please refer to your user handbook for assistance. Using a left-handed twist, you can remove the old filter. This will allow you to access it
- Afterwards, pull it downward to remove it from the filter housing. The replacement filter should be inserted by pushing it up into the filter housing and then turning it to the right. Check to ensure that the notch at the top of the filter corresponds to the arrow on the filter’s housing. Replace your filter and then flush it thoroughly with a few liters of water to wash out any contaminants or air that may have gotten into it. Then, make sure that the water filter light on your refrigerator is turned back on. Please refer to the following sections for further information.
After turning off the water, locate the filter and clean it as necessary. You should reference your user manual if you are unclear of where it is located. Using a left-hand twist, you may remove the old filter. Upon doing so, it will be unlocked. Afterwards, pull it down to release it from the filter housing. Using your fingers, press the new filter upwards and then to the right; this will ensure that it is properly installed. To avoid clogging the filter, make sure it has a notch at the top that matches the arrow on the housing.
Then, make sure that the water filter light on your refrigerator is turned off and back on again.
- Turn off the water supply first, and then look for the filter. If you are unclear of where it is, please refer to your user handbook for guidance. By twisting it to the left, you may remove the old filter. This will allow you to access it. then pull it all the way out of the filter housing
- The replacement filter should be inserted by pushing it up into the filter housing and then turning it to the right
- Check that the notch on the top of the filter corresponds to the arrow on the filter housing. Replace your filter and then flush it thoroughly with a few liters of water to wash out any contaminants or air that may have accumulated. After that, make sure to turn off the water filter light on your refrigerator. More information may be found in the following areas
Please keep in mind that some models may require you to press two buttons at the same time in order to reset the light. Touch screen models will instead make use of on-screen menus. Consult your refrigerator’s owner’s handbook for detailed operating instructions. The water filter light and timer on your Family Hub refrigerator may be reset by following the instructions outlined below.
- Please keep in mind that some models may require you to press two buttons at the same time in order to reset the lamp. The on-screen menus will be used in place of buttons on touch screen devices. Consult your refrigerator’s owner’s handbook for detailed instructions. With the following procedures, you may reset the water filter light and timer on your Family Hub refrigerator.
On models RF4289 and RSG309, you may also reset the filter light by pressing the reset button.
- Then, at the bottom of the screen, navigate to and pick theSettingsicon, and then tapWater Filter to begin. As soon as the Water Filter menu appears, press Next three times in the lower right corner of the screen until you reach page 4/4 of the Water Filter menu. Hold the object with your fingertips. Remove and reinstall the water filter until it changes its status, which may be done in the middle of the display. After the message “Filter Replaced” appears and disappears from the screen, tapSave in the lower right corner of the screen.
In order to define what is filtered by a water filter, the National Sanitation Foundation (NSF) and the American National Standards Institute (ANSI) have developed a variety of standards. Samsung’s water filters are Carbon Filters that meet the requirements of the NSF/ANSI 42, NSF/ANSI 53, and NSF/ANSI 401 standards, among other requirements. NSF/ANSI 42 is a standard for food safety and sanitation.
- Filtered to decrease the presence of aesthetically objectionable contaminants like as chlorine and taste/odor
NSF/ANSI 53 is a standard that specifies how a product should be designed, manufactured, and tested.
- Certified to decrease a pollutant that has a negative impact on health. The following substances have been identified as having negative health effects by the United States Environmental Protection Agency (EPA) and Health Canada: Asbestos, Atrazine, Benzene, 2, 4-D, Carbofuran, Chlorbenzene, Cyst (99.99 percent), Endrin, Ethylbenzene, Lead, Lindane, Mercury, O-Dichlorobenzene, P-Dichlorobenzene, Tetrachloroethylene, Toxaphene
NSF/ANSI 401 is a standard for food safety and sanitation.
- It has been proven to lower one or more of the 15 emerging pollutants in drinking water by at least 50%. Pharmaceuticals and chemicals that are not yet controlled by the Environmental Protection Agency or Health Canada include: atenolol, bisphenol A, carbamazepine, DEET, estrone, linduron, nonylphenol, phenytoin, trimethoprim, and trimethoprim sodium.
Check out our troubleshooting guide for assistance if you are having difficulties installing the water filter in your refrigerator.
How to replace the water purifier filter for my refrigerator?
If you are experiencing difficulty installing the water filter in your refrigerator, please refer to ourtroubleshooting guide for further assistance.
When the water filter indicator is lit on the display panel
When the water filter indicator light reaches five months or 450 gallons, it is programmed to become orange, and when it reaches six months or 500 gallons, it is set to turn red. To reset the water filter indication, remove the filter and then reset the function on the control panel. Replace the filter and try again. The color of the light might vary depending on the type. Green or blue lights are common. Note:
- Based on the model that you own, the actual design of the display panel may change. Despite the fact that this image is a reference in English, it is also accessible in the language of your choice.
How to replace the water purifier filter
Based on the model that you have, the actual design of the display screen may change. This graphic serves as a reference in English, but it is also accessible in the language of your choice; nonetheless,
- This picture is only a sample in English, and the image is also available in the language of your choice
- When removing the filter cartridge, make sure to keep it horizontal.
Reset the filter indicator light after replacement
Immediately following the replacement of the old filter with a new one, the filter replacement cycle must be reset by pushing and holding the alarm button for three seconds. This ensures that the product performs well and that replacement cycles are followed. When the filter indication is reset, the color of the indicator changes from red to green (or the words Replace Filter will disappear). Please keep in mind that this image is only a preview in English and that the full version is available in the language of your choice.
To determine which filter has to be replaced, look for the serial numbers that relate to each filter for your refrigerator model.
- The serial number may be easily seen by opening the upper left door on the front or the lower left door on the side
- Both doors are located in the top left corner. The label for your refrigerator contains the model name and serial number of your refrigerator
If you open the top left door on the front or the bottom left side, you will be able to quickly see the serial number. The label for your refrigerator contains the model name as well as the serial number;
Thank you for your feedback!
Please respond to all of the questions.
Contact Us
There are a variety of various ways to get in touch with us, including Live Chat, Email, Whatsapp, and other methods.
Call
Speak with a member of our knowledgeable and devoted staff.
Face to face Support
Find the Samsung Service Centers in your region that are the most convenient for you.
How to Change the Water Filter on a Samsung Refrigerator
Find the Samsung Service Centers that are closest to you.
Step-by-Step: How to Change the Water Filter on a Samsung Refrigerator
If you don’t have technical skills, changing your water filter is a breeze thanks to a Samsung design. You can begin by following the steps outlined in this document.
Step 1: Purchase the Correct Samsung Water Filter
If you do not have technical skills, Samsung has made it simple to replace your water filter. You can begin by following the steps outlined in this guide.
Step 2: Verify you have the right part!
Refrigerator water filters are model number specific, which means that you must use the exact filter for your refrigerator and not just any water filter. WARNING: Before opening the package, double-check that you have the appropriate filter. It is not possible to return the water filter once it has been installed. The water filter component number DA29-00020B (shown below) is used in the majority of Samsung french door, four flex, and side-by-side refrigerators; nevertheless, it is important to check the refrigerator model number to ensure that you are purchasing the proper filter for your product.
It is recommended that you replace your Samsung water filter after 300 gallons or 6 months. See the following specifications for further information: Your Samsung water filter will be sent with a new water filter, an instruction manual, and sticker reminders for the filter’s expiration date.
Step 3: Locate the Samsung Water Filter on Your Refrigerator.
Refrigerator water filters are model number specific, which means that you must use the proper filter for your refrigerator–not just any water filter will suffice here. Caution: Before opening the packet, double-check that you have the appropriate filter. You will be unable to get your money back if you install the water filter. The water filter component number DA29-00020B (shown below) is used in the majority of Samsung french door, four flex, and side-by-side refrigerators; however, you should check the refrigerator model number to ensure that you are purchasing the proper filter for your device.
Below are some further technical specifications.
Step 4: Prepare the Filter for Installation
Simple removal of the plastic wrapping and removal of the top cap are all that is required to ready the filter for installation. A well designed filter will look something like this.
Step 5: Install the Samsung Water Filter
Installing the water filter is accomplished by turning the filter knob to the left. It takes approximately 1/4 turn to unlock the filter. If possible, you should be able to remove the filter without having to switch off the water supply. To release the filter, slowly move the refrigerator forward and switch off the main water supply. In order to install the replacement filter, screw it into place with a quarter-clockwise turn. When the filter is locked in place, you may hear a pressure noise, which is completely normal.
Step 6: Purge 1 Gallon of Water
1 gallon of water should be sent through the filter. For the first 3-5 seconds, you may hear some air in the lines. This is quite normal. Remove the water from the container. It’s now time to put your water dispenser to work!
Step 7: Reset the Change Water Filter Indicator
By pressing and holding the Crushed Ice button for three seconds, you may reset the Change Water Filter Indicator light. Do you need assistance with the water dispenser or ice maker on your Samsung refrigerator? For Samsung Certified Care on your refrigerator, get in touch with Unique Repair Services.
How to Change Water Filter on Samsung Refrigerator
Purchasing the proper water filter for your Samsung refrigerator can be a difficult task, and you may be unclear of how to go about installing the filter correctly. Change your Samsung Water filter at least once every six months in order to ensure the health of you and your family members. Is it difficult for you to understand how to change the filter on your Samsung refrigerator? You will no longer be perplexed by the situation. Want to know “how to change a Samsung water filter”? Look no further!
A full explanation of “how to change a water filter on a Samsung refrigerator?” has been provided by Swift Green Filters.
Additionally, we’ll explain all you need to know about replacing the water filter on a Samsung refrigerator before you purchase aSamsung Refrigerator Water Filter Replacement in this blog post.
Find the Correct Samsung Refrigerator WaterFilter Part Number for your Samsung Refrigerator
When it comes to replacing the Samsung water filter, the first and most important step is to identify the exact filter part number for your Samsung refrigerator. In order to accommodate different Samsung refrigerator models, several types of water filters are used. Samsung refrigerator water filters are divided into several groups based on their sizes and forms. Among these categories are: It is necessary to first identify the right water filter for your Samsung refrigerator before attempting to replace the water filter on the Samsung refrigerator.
Alternatively, if you are unfamiliar with any of these terms, you may quickly locate your appropriate Samsung refrigerator water filter by visiting this page:
Step by Step Solution to Learn How to Change the Water Filter on your Samsung Refrigerator
Swift Green Filters has simplified the process for you if you are faced with the question of “how to change Samsung water filter.” In order to make things as simple as possible for you, we will walk you through the process of locating the Samsung refrigerator water filter, removing the Samsung refrigerator water filter, and finally installing the Samsung water filter. You don’t need any technological knowledge to complete this task on your own.
- The following is the right replacement filter for your Samsung refrigerator: You may choose from a variety of appropriate water filters on the market that are designed to work with your Samsung refrigerator. While making a purchase, you may search for a certain filter part number or refrigerator model number. Make certain that you are selecting the appropriate filter for your Samsung refrigerator. Find the finest replacement water filter for your Samsung refrigerator. Examine your part to ensure you have the correct one: Each Samsung Refrigerator may utilize a unique model numberfilter part number. It implies that you must have the proper water filter for your refrigerator–not just any water filter will suffice
- And Locate the Samsung Water Filter on your refrigerator by following these steps: Finding the position of the Samsung refrigerator water filter is not a difficult task, but it might range from one Samsung refrigerator to another depending on the design
- Nonetheless, Prepare the filter for installation by doing the following: The following stage in the installation of a Samsung water filter is to prepare the filter for installation. To do this, you must first remove the plastic wrapping from the bottle and then unscrew the top cap. Make careful to switch off the water supply before removing the old Samsung refrigerator water filter so that the pressure does not become a hindrance during the removal process. Depending on the filter model you’re using, you’ll need to spin it counterclockwise, clockwise, or pull it straight out of the housing. Replacement of Samsung Water Filter: When replacing the old filter with a new one, make sure you follow the instructions in the handbook exactly. Simply pressing and holding down the water selector switch for three seconds will reset the Change Water Filter Indicator.
The following is a list of the most popular replacements for Samsung Refrigerator Water Filters that we sell. If you are currently using one of the refrigerator water filters listed below and would want to replace it, purchase the water filter that is most suitable with your Samsung refrigerator. In addition to DA2900020B,RF4287HARS,RF263BEAESR, HAFCIN, DA2900003B, DA29-00003F, and DA29-0002B, DA97-06317A, ES-1, and 9101 are also included in the list of DA2900020AH. ere, we’ve attempted to clarify all of the stages in a straightforward manner.
If you are still having difficulties replacing the water filter in your Samsung refrigerator, please do not hesitate to contact Swift Green Filters for more assistance or advice.
Shop By Category
Swift Green Filters provides a large selection of filtering products. This product is a suitable Replacement Water Filter for your existing water filter. The above-mentioned brands have neither commissioned or supported the development of this filter. Swift does not represent any of the brands mentioned above. All of the brand names and part numbers that have been mentioned have been used solely for the purpose of reference. Swift Green Filters is an independently owned and operated company.
The maximum liability is equal to two times the cost of the goods.
How to Change a Water Filter on a Samsung Refrigerator
swiftgreenfilters.com provides a large selection of filtering products A suitable Replacement Water Filter, such as this one, is available. The above-mentioned brands have not commissioned or supported the development or implementation of this filter. Swift is not affiliated with any of the brands listed above. It is just for reference purposes that all of the brands and part numbers have been mentioned. swiftgreenfilters.com is an independently owned and operated corporation.
Liability Exclusions and Restriction Swift disclaims any liability for losses or damages resulting from improper installation or malfunctioning equipment. It is possible to be held liable for up to double the cost of the goods.
- Swift Green Filters provides a diverse range of filtering products. This item is a suitable Replacement Water Filter for the item already purchased. This filter was not created by or sponsored by any of the businesses listed above. Swift does not represent any of the brands listed above. All of the mentioned brand names and part numbers have been included solely for the purpose of reference. Swift Green Filters is a privately held company. Liability Restrictions Swift is not liable for any damage caused by incorrect installation or malfunctioning equipment. The maximum liability is equal to double the cost of the goods.
The Drip Cap
- A water filter is included in a number of Samsung refrigerator models. Dispensing the filtered water from the water dispenser is the first step. Water may be turned back on by turning the shut-off valve to the right (see illustration).
Samsung Fridge Filters: Easy-Guide to Replacing, Resetting and Changing.
Samsung is one of the most successful corporations in the world today. The South Korean technology corporation, which has its headquarters in Seoul’s Samsung Town, was initially started as a trade company, but it entered the electronics sector in the 1970s after expanding into other markets. Samsung declared in 2015 that it intended to surpass General Electric as the world’s largest appliance manufacturer. To achieve this, as you might expect, the company had to outperform numerous well-known global corporations, like Whirlpool, Bosch, and Electrolux, among others.
- Samsung’s collection of home appliances will feature refrigerators that supplied sparkling as well as still, filtered drinking water, making them far more sophisticated than anything else that other household manufacturers were manufacturing at the time.
- Samsung is unquestionably one of the world’s biggest appliance manufacturers, despite the fact that they are not exactly at the top of the scoreboard that has just been established.
- One of the reasons water tastes so much better when it comes out of a Samsung refrigerator is due to the superior filtering system that the refrigerator has installed.
- It is critical that you update your Samsung water filter on a regular basis if you want to continue drinking wonderful water at home.
- This will result in terrible tasting drinks that you will be embarrassed to give your friends and family.
1. How to replace RSG5UCRS Samsung Fridge Filter:
When it comes to replacing your RSG5UCRS Samsung Fridge Filter, we have some good news for you: it’s more simpler than you would imagine. When the filter indicator light becomes orange or pink, it indicates that a new filter should be purchased. When the filter indicator becomes red, it is time to replace it. If six months have passed and the indication light has not gone red, we nonetheless recommend that you replace the filter in order to preserve the excellent quality of your drinking water at all times.
An inbuilt water filter is found in around 90 percent of American-style refrigerators and freezers. Only internal filters should be replaced according to the procedures provided below. Instructions on how to change an external filter may be found further down the page.
- The old water filter may be removed by turning it 45 degrees to the left to open it
- At this point, gently remove the old water filter and toss it away
- The water will stop off automatically at this time. Insert the new water filter into the available area and rotate it 45 degrees to the right
- If the padlock symbol on the filter corresponds to the sign on the filter, the filter is in the proper position. Immediately following the installation of the new filter, push the water filter reset button for three seconds to reset the light indicator.
Twist it 45 degrees to the left to open it, and then remove the old water filter. Gently remove the old water filter and throw it away; the water will cut off on its own at this point, so be careful. The replacement water filter should be pushed into the available area and turned 45 degrees to the right; A lock sign that corresponds to a symbol on a filter indicates that a lock has been placed in the proper location. Immediately following the installation of the replacement filter, push the water filter reset button for three seconds to reset the light indicator;
- Immediately turn off the water supply
- Remove the old cartridge from the system and dispose of it properly
- The water filter should be positioned such that it flows in the direction of the refrigerator
- The inlet and exit tubing should be connected to the proper end of the filter by firmly inserting the tube all the way into the filter until it is snugly shut
- Check to see that the tube is square and free of scratches – you may trim it if required. The filter clip should be installed according to the directions in the installation manual. Make sure there are no leaks in the filter by turning on the water. Re-do the installation processes and check again whether there are any leaks. If the leaks continue, remove the filter and contact customer service. Allow water to circulate through the filter for five minutes in order to clean the entire system.
2.How to Replace a DA29-00003F Water Filter
The DA29-00003F water filter is a replacement for the DA29-00003G, DA29-00003B, and DA29-00003A water filters, among others. In no way is it a substitute for the superior DA29-00003G filter, nor is it compatible with that more sophisticated filter. The replacement of an internalDA29-00003F water filter is described in the following instructions.
- The old water filter may be removed by turning it 45 degrees to the left to open it
- Gently take it out and throw it away — this will cause the water to cut off automatically
- To install the replacement water filter, insert it and rotate it 45 degrees to the right to secure it in place
- If the padlock sign on the water filter corresponds to the symbol on the water filter, you have completed the task successfully. To reset the water filter indication, press and hold the water filter reset button for three seconds.
Suggestions for improvement In the event that you are having difficulty removing the water filter, it is possible that there is excessive water pressure behind the filter. Remove the top two refrigerator shelves and use a stronger pull on the filter to get it out. If you are unable to squeeze the new filter into the available area, turn off the water supply valve and dispense a little amount of water. As a result, the pressure will be reduced, making it easier to install the new filter.
3. How to Reset the Water Filter Indicator Light on a Samsung Fridge
In addition to the water filter, every Samsung refrigerator that has one features a water filter indicator that tells you when it’s time to replace the water cartridge. The filter should be replaced once every six months regardless of whether or not the light changes color. This will ensure that you continue to drink the high-quality water that you have come to like. If you don’t change your water filter on a regular basis, it won’t function properly. Instead of drinking great-tasting, clean water, you’ll be forced to drink strange-tasting water that may include unwelcome toxins.
- Blue indicates that your water filter is performing properly.
- Red:Your water filter has reached the end of its useful life and it is time to replace it with a new one.
- By pushing and holding the “Alarm / Hold for 3 seconds to Reset Filter” button for three seconds, you may reset the indicator light.
- This will return the indicator light to its original blue state.
4. How to Replace a DA29-00003G Samsung Fridge Filter
Instructions for internal filters are provided in the next section.
The Samsung DA29-00003G water filter is always installed from inside the device itself.
- To remove the old water filter, twist it a quarter turn to the left to free it
- Then lift it out. Gently remove the old water filter and throw it away
- This will cause the water to be switched off automatically. Insert the new water filter and rotate it by a quarter turn to the right until it is secure. If the padlock sign on the water filter corresponds to the symbol on the water filter, you have successfully installed it. The water filter indication should be reset after installation by pressing the water filter reset button for three seconds after completion.
Suggestions for improvement In the event that you are having difficulty removing the water filter, it is possible that there is excessive water pressure behind the filter. Remove the top two refrigerator shelves and use a stronger pull on the filter to get it out. If you are unable to squeeze the new filter into the available area, turn off the water supply valve and dispense a little amount of water. As a result, the pressure will be reduced, making it easier to install the new filter.
5. Why You Need to Change Your Fridge Filter Every 6 Months
You might believe that you only need to change your refrigerator filter when the indicator light indicates that you should – but this is not the case. In some cases, waiting until the light goes red might be harmful to your health. A water filter prevents pollutants from flowing through the pipes and into your drinking water supply. When the water filter is no longer functional, all of the impurities that have been caught can now pass through into your drinking water, making it even worse than if you had not used a water filter at all.
Each Samsung water filter contains activated carbon filter material that has been approved for usage with a specific amount of water before the cartridge has to be replaced.
By absorbing impurities from water, activated carbon serves as a filter for such contaminants.
This occurs when there is no more surface area available for the absorption of additional pollutants and the filter’s capacity has been achieved.
How To Change Your Samsung Fridge Water Filter
Samsung refrigerators are among the most popular models on the Australian market. Homeowners like the built-in usefulness of their cabinets because of the diverse selection of functions and styles available. On a daily basis, the Samsung refrigerator filter supplies your family with clean, fresh, filtered water and ice. Each Samsung water filter has a lifespan of around six months, however some may need to be replaced sooner if they are used often or if the water is exceptionally harsh. The fact that your Samsung refrigerator’s filter indication light has begun to illuminate indicates that it is time for you to replace your old filter with a new one.
Where Is the Water Filter on My Samsung Fridge?
In order to purchase a new Samsung water filter, you must first determine the model of Samsung water filter you currently own. You will be able to purchase the appropriate replacement because of this. Discount Fridge Filters assists clients in locating the appropriate filter for their refrigerators depending on the model number of the refrigerator. Other brands of refrigerator filters may be used to replace the filter in a Samsung refrigerator and perform just as well; however, you must know the model number of your refrigerator in order to obtain suitable fridge filters.
If you are having trouble identifying the model number of your Samsung water filter, you may watch the video below.
It is possible for your water filter to be installed in three different locations.
In some versions, the water filter will be located on the top right inside or at the back of the refrigerator. If you are unable to locate your water filter or identify the model number of your refrigerator, you can always get in touch with us at Discount Fridge Filters for assistance.
Do You Have To Turn Water Off To Change Your Samsung Refrigerator Filter?
Samsung refrigerators with internal filters are equipped with an auto shut off valve, which eliminates the need to turn off the water to change the filter. Because customers have experienced installation issues as a result of shutting off the water, causing air locks and other issues, we do not recommend shutting off the water supply. When customers turn the water supply back on, they may experience sputtering water or even no water coming out of the faucet. Samsung refrigerators with external filters, on the other hand, nearly usually require the water to be turned off before the filters can be swapped out or replaced.
If this is the filter you require, turning off the water supply is a critical step in ensuring that you do not have a flood of water from this connection when changing your filter.
However, reducing pressure by dispensing some water is usually always a preferable choice.
How To Change An Internal Water Filter on a Samsung Refrigerator
Determine the placement of the water filter in your refrigerator. 2. Remove the old filter by lifting the protective cover (if your filter type has one) and turning it counter-clockwise to dislodge it. Alternatively, if it is difficult to lift, it is possible that pressure has built up; dispense some water and try to relax it before tugging it again. 3. Take your new filter out of the packing and remove the protective cover from it. 4. Press in the new filter and spin it clockwise until its lock symbol is aligned with the arrow.
- Replace the old filter.
- Replace the filter cap, if your filter type has one, and run several litres of water to confirm that the water has been adequately filtered and that any air has been drained out of the line.
- This assures that there will be no leaks in the future.
- Reset the filter-indicator light on the inside of your refrigerator.
- The indicator light should return to its original state of green.
- You may also go to the user manual that came with your Samsung refrigerator for complete instructions on how to change the water filter and reset the indication light on the refrigerator.
How To Change An External Water Filter on a Samsung Refrigerator
1. Locate the isolation valve, which should be situated somewhere along the water supply line to the refrigerator. Turn it off if it’s on. Using the water outlet located near the refrigerator, depressurize the system by drawing a large glass of water. 2. Have a bucket and a towel handy in case there is a tiny amount of water spilled throughout the operation. The old filter should be removed by depressing the locking collars at either end of the filter with your thumb nail (or something similar) while simultaneously pulling out the water supply line from the filter.
- It is possible to hold down the locking collar with your fingers or with a solid edged item, which will allow the hose to slip out with relative ease.
- We recommend that you use a sharp object, such as a Stanley knife.
- 4.
- For this, you may either place the filter under a running faucet and let the water to flow directly into a sink, or you can submerge the filter in a bucket or other container of water.
- 5.
- The line will go in approximately 5 – 10mm and you will be able to fully put the filter into place.
- After you’ve placed the filter in the bucket, switch on the water supply and allow approximately 5 litres of water to run through the filter and into the container.
After you have turned off the water supply, connect the line that flows into the refrigerator.
7.
8.
If the filter light on your Samsung refrigerator does not come back on, press and hold the “Ice Type” or “Moisture Control” buttons as well as the Child Lock button for three seconds.
Avoid holding the buttons for an excessive amount of time, since this may force the procedure to restart, requiring you to release all of the buttons and hold them again until the light changes to green again.
You may also go to the user manual that came with your Samsung refrigerator for complete instructions on how to change the water filter and reset the indication light on the refrigerator.
Can I Run My Samsung Refrigerator Without the Water Filter?
Water filters are designed to eliminate toxins such as lead, mercury, chlorine, and other contaminants from your drinking water and ice, among other things. The majority of Samsung refrigerators may still work well even if they do not have a water filter installed. In spite of the fact that rotary valves in your refrigerator may bypass the water filter and provide you with water even when there isn’t a water filter installed, this does not imply that you should continue to use your Samsung refrigerator in this manner.
At first, you may be unsure about how to replace your water filter.
In the event that you do not change your old filter after 6 months, you may face mineral buildup, which may result in your refrigerator experiencing costly malfunctions.
Tips on How to Change Your Samsung 3G 3F Filter Head Alignment
A misaligned head of a Samsung 3G 3F water filter might cause difficulties if the filter is used. If you have a Samsung 3G 3F water filter, you may face problems if the head gets misaligned. We have covered the basics of this straightforward repair procedure in a few steps. You may quickly correct the alignment of your water filter by watching the video provided below.
Where Can I Buy a Samsung Refrigerator Water Filter?
At Discount Fridge Filters, we can assist you in selecting the appropriate filter and ensuring that it is compatible with the Samsung refrigerator model that you have purchased. On the market, there are many different types of water filters to choose from, and you can save money by selecting one from our extensive inventory. Please do not hesitate to contact us at any time if you want assistance in selecting the appropriate water filter. We would be pleased to answer any questions you may have and to provide you with guidance on how to go about installing it.