How Much Is A Water Filter

Learn how much it costs to Install a Water Treatment & Purification System.

On February 14, 2022, the information was updated. HomeAdvisor has contributed to this article.

Whole House Water Filtration System Cost

It is estimated that the average cost of a water treatment and filtration system is $2,016, while individual households may pay anywhere from $993 and $3,078 based on a variety of circumstances.

Type Average Cost Range
Whole house systems $1,000-$4,200+
Reverse osmosis systems $200-$4,200
Under sink systems $200-$1,300
Countertop machines $60 – $500

Water Treatment System Cost Calculator

Let’s run some numbers to see what the costs are. What part of the world are you in? What part of the world are you in?

National Average $2,016
Typical Range $993 – $3,078
Low End – High End $193 – $5,000

The cost information in this report is based on real project costs submitted by 6,422 HomeAdvisor users.

Whole House Water Filter Installation Cost

The cost of installing a whole-house water filter ranges from $600 to $4,200. Purchase and installation of commercial-grade equipment costs between $5,000 and $14,000. Most units cost between $300 to $3,500, depending on the kind, the number of stages of filtration, and the amount of gallons they can handle. Labor and supplies add another $300 to the total cost of $700. These are installed near the point at which water enters the home, which is referred to as the Point-of-Entry (POE). This sort of system is sometimes referred to as a POE system (Point of Entry).

Multistage filtration systems feature numerous filters, which are installed in the following order:

  1. Sediment filter: This filter removes suspended particles from the water. Carbon filter: Removes chlorine from the water to aid in the protection of the RO filter. Enhances the sense of taste In addition to removing chemicals, the reverse osmosis membrane also decreases total dissolved solid contaminants by a significant amount. Deionization filter: This filter removes the majority of the residual dissolved particles. UV light: The final phase in systems that are equipped with it, and it is responsible for sterilizing the water of any remaining live organisms.
Find Local Water Treatment Pros

Well water filtration systems are the same price as any whole-house treatment system, ranging from $1,000 to $4,000 or more. They are, however, far more specific depending on the challenges that each well is experiencing. To provide an example, one water source may have a lot of sediment yet be perfectly safe to drink, whilst another may be crystal clear but contain bacteria or heavy metals.

Reverse Osmosis Systems

Reverse osmosis systems range in price from $250 to $4,000. The majority of individuals choose for under-sink, faucet-based reverse osmosis systems, which range in price from $250 to $1,300. The cost of a general full home type ranges from $1,000 to $4,000 dollars. Reverse osmosis systems require frequent filter replacements in order to function properly, increasing the overall cost of the system over time.

Under Sink Water Filter Installation Cost

Depending on the manufacturer, reverse osmosis systems range in price from $250 to $4,000. Under-sink, faucet-based reverse osmosis systems are most popular, with prices ranging from $250 to $1,300 per system. The cost of a general entire home type ranges between $1,000 and $4,000 dollars. Keeping reverse osmosis systems operating efficiently requires frequent filter replacement, which increases the overall cost of ownership over time, as shown below.

Compare Quotes From Water Treatment Pros Near You
Purification Method Unit Price Labor
Ultraviolet (UV) Light $200 – $1,000 $300 – $500
Water Distiller $50 – $4,000 $300 – $500
Chemical Injector $300 – $1,000 $300 – $500

UV Light Water Treatment Cost

The cost of UV light water treatment ranges from $500 to $1,500 or more. It is intended for usage in conjunction with other treatment system installations rather than as a stand-alone device.

All it does is neutralize live organisms, like as bacteria, while leaving chemicals and heavy metals in the environment untouched. Ultraviolet light works best in pure water, so you should filter out any pollutants before using it to sterilize your water.

Talk to Local Water Treatment System Installers
Countertop $50 – $1,500
Commercial Grade $1,000 – $4,000

People who just want clean-tasting drinking and cooking water can benefit from distillers, which are available for purchase for between $150 and $1,500 or more for household use and depending on capacity. Commercial-grade devices can cost upwards of $5,000. This is one of the most effective methods of removing toxins such as heavy metals, fluoride, and microorganisms from the environment. Although distillers do not remove all of the pollutants, they do extract minerals and potentially hazardous heavy metals.

Chemical Injector Water Purification Cost

Installing chemical injectors for chlorine purification might cost between $600 and $1,500. They filter rainwater or well water by injecting chlorine and optional colors into the water. Because there are alternative techniques of removing contaminants that are less expensive than this procedure, it is not frequently employed.

Rainwater Filtration System Cost

Depending on the size of the system and the components you want, complete rainwater post-collection filtering systems can cost anywhere from $200 to $10,000 or more! For most households, a complete collection and filtration system, which includes storage as well as pre and post collection filtering, costs between $1,000 to $30,000 or more. Because rain falls in a refined and drinkable condition, the most expensive part of the process is collecting and storing it. In rare instances, it may be able to take up airborne pollutants, although the amount is tiny.

The majority of the pollution caused by rainfall is caused by the collecting process, during which it takes up particles such as sand, dirt, and other pollutants.

  • Complete rainwater post-collection filtering systems range in price from $200 to $10,000 or more, depending on the size of the system and the components that are required. System costs for most houses range from $1,000 to $30,000 or more, depending on the size of the system and how much storage space is required. The cost of collecting and storing rain is the most expensive since rainwater is cleaned and drinkable. The device may occasionally take up airborne pollutants, although the amount picked up is negligible. A basic filtering device is usually all that’s required. When precipitation collects, it gathers up material such as sand, dirt, and other pollutants, which leads to the majority of the pollution in the water supply. These are the steps that are often used in a system:
Get Quotes From Local Water Treatment Installation Pros

The pricing variables for water filtration and purification may be divided into two categories:

  • The system’s overall size. How much filtration do you require? Drinking water implies that you just need one or two point-of-service (or point-of-use) devices positioned beneath a sink to provide adequate protection. You’ll need a whole-house system to accommodate the addition of showers and laundry
  • Number of phases. The fee increases proportionally to the number of stages you obtain. From a 2 stage under sink mount for $50 to a commercial grade 10 stage system for $5,000 or more, there is something for everyone.

DIY Water Filter Installation vs. Hire a Pro

For point-of-use installations, there are a variety of DIY installation kits available. It generally consists of screwing a few of connectors onto the pipes of your sink. You may also hire a professional to install them for you if you like. Because they connect directly to your home’s plumbing, the majority of whole-home models require expert installation. The best approach to ensure that your water filtration system is functioning properly is to engage a local water filtration specialist. You can trust them to not only ensure that it is properly installed, but they will also guide you through your selections and explain why they believe they are the best appropriate for your house.

FAQs

Select a water filtration system that is designed to address the specific concerns that are present in your drinking water. Purchase an analysis kit for $30 to $100 to get started on your own. Some homes may have mineral concerns, while others may have excessive quantities of chlorine in the air. Others may merely require sedimentation and sterilizing at this point. Have a professional test done to determine what is best for your condition.

Are whole house water filtration systems worth it?

When you consider that the average person spends $400 to $1,000 a year on bottled water, it’s probably a good financial investment.

Additionally, by eliminating chlorine and other impurities, you may have peace of mind as well as potential health advantages.

How much does it cost to maintain a whole house water filter?

It can cost $50 to $300 per year to maintain a whole home filter, depending on how many stages you have, the types of filters you use, and whether you do it yourself or employ a professional.

Still Have Questions About Water Purification Systems?

Image courtesy of the manufacturer A Quick Look at the Costs of a Water Filtration System

  • Average overall cost: $2,000. Carbon filter systems range from $50 to $500
  • UV disinfection systems range from $800 to $2,000
  • Ionization systems range from $1,000 to $2,000
  • And reverse osmosis systems range from $1,400 to $1,500. Installation of a filtration system costs on average $500
  • The range is $100-$2,000.

Do you only drink bottled water? If so, what kind? Perhaps you have one of those filter pitchers in your refrigerator. It’s possible that you’ll benefit from installing a water filtration system in your house in either case. In addition to making water more pleasant, filtered water may improve the health of your skin and the efficiency of your appliances. This Might Also Be of Interest to You: I’m wondering how much a water softener will set you back. A whole-house water filtration system appears to be a costly investment — but depending on the sort of system you choose, it may be less expensive than you expect.

What Is a Whole-House Water Filtration System?

The water that comes out of your faucets may include contaminants such as rust, silt, and minerals, depending on where you reside and the source of your water. Impurities are removed from water before it reaches your home using a whole-house filtration system. In addition to using UV purifiers and carbon filters, water is filtered in other ways as well.

What Are the Benefits of a Water Filtration System?

Given that these systems filter all of the water that enters your house, the benefits extend beyond simply providing healthier drinking water. Here are some of the most compelling arguments in favor of installing a whole-house filtration system:

Environmentally Friendly

For those who want to avoid the water that comes out of their tap, installing a water-filtration system may allow you to cease relying on bottled water entirely. This will help to decrease plastic waste while also potentially save you money.

Cleaner Clothes and Dishes

Water that has not been filtered may include minerals that are capable of breaking down soap. Consequently, clothing or dishes that are not as clean as they may be are produced. Your clothes washer and dishwasher will clean your clothing and dishes better if you use a water filter.

Kinder to Sensitive Skin

The abrasive minerals contained in unfiltered water can aggravate skin diseases such as eczema and psoriasis, among other things. Filtered water is generally considered to be gentler on the skin and hair.

Cleaner Pipes, Faucets and Showers

Dermatological diseases such as eczema and psoriasis can be made worse by the harsh minerals present in unfiltered water. When it comes to the skin and hair, filtered water might be more kind.

Test Your Water

Test your water before making the choice to install a whole-house water filtration system to ensure that such a system will be beneficial to your household. In the case of those who do not have access to well water, a filtering system is not always required. Testing your water can also assist you in determining which sort of system is most appropriate for your needs. Water testing kits are available for purchase on the internet. Water testing is available in some areas via the use of local laboratories.

See also:  How Much Electricity Does A Water Heater Use

How Much Does a Water Filtration System Cost?

Installing a filter system will cost you around $2,000 in total, including labor and supplies.

The cost of the system you pick is determined by the kind and complexity of the system you choose. Simpler systems may be purchased for less than $1,000, although more complete systems can cost upwards of $5,000.

Types of Water Filtration Systems

You’ll want to select a system based on the amount of water filtration you’ll require. Consult with local specialists before building a water filtration system since the water in your location may demand a unique type of filtration system. Some of the most prevalent whole-house water filtration systems include the following:

Reverse Osmosis

Reverse osmosis systems filter water by forcing it through a membrane with the help of the water pressure already present in your home. It has the capability of removing silt, minerals, bacteria, and heavy metals from water sources. It is then collected and stored in an underground tank for later use. A reverse osmosis system, on the other hand, wastes a significant amount of water. Up to 25 gallons of water are wasted for every gallon of filtered water. The price of these systems is between $1,400 and $1,500.

Carbon Filters

This is most likely the most extensively utilized way of purifying water in the world today. Water runs through the carbon filters, which are designed to gather minerals and sediments as it does so. Activated carbon filters are available in two different varieties: block and granular. Both of these devices feature filter cartridges that must be updated on a yearly basis. Granular carbon filters are formed of organic materials and are used to filter out impurities. Installation for both systems is between $50 and $500.

Ionization

Ionization systems ionize water by delivering a low-frequency electromagnetic pulse to the water. This causes the charge of minerals in the water to be reversed, and the minerals are then eliminated. These systems range in price from $1,000 to $2,000.

UV Disinfection

When water flows through this sort of water purification system, it is exposed to ultraviolet lamps, which destroy bacteria and other pathogens. When it comes to eliminating silt from water, a UV disinfection system is ineffective. Expect to pay between $800 and $2,000 for this service. More Articles that are related:

  • Prevent frozen-pipe problems by being familiar with the following information
  • How to Repair Common Plumbing Leaks
  • Best Water Leak Detectors for 2020
  • How to Repair Common Plumbing Leaks Allow it to Flow: Increasing the low water pressure in the shower
  • Put an end to flushing money down the drain: Reduce the flow rate

Should I Hire a Professional?

The quick answer is: most likely. For those just concerned with the quality of their drinking water, several of these systems — notably activated carbon systems — may be put right at the faucet. Most are less than $100 and are designed to be installed over the faucet to filter water as it is released. For an additional $200 to $400, you might invest in a more complicated under-the-sink or countertop device that has advanced filtration. All of them are excellent do-it-yourself options. In contrast, if you have your heart set on a whole-house system, you’ll almost certainly want to have it installed by a certified expert.

The cost of installation is determined on the difficulty of the job.

It is possible that a reverse-osmosis system may need to be installed by a plumber if your present plumbing does not have a mechanism to flush wastewater.

How Long Does a Whole-House Water Filtration System Last?

The sort of system you have, as well as how much water you use on a daily basis, will determine how long it will last. Reverse osmosis and ionization systems can survive for many years if they are properly maintained. Replace the carbon filters in your vehicle once a year. Because we are spending more time at home than ever before, it is critical to be prepared for unexpected home repairs with a plan from HomeServe.

The knowledge that you can easily call our 24-hour repair hotline in the event of a covered breakdown provides you with peace of mind. Explore the options that are available in your community.

How Much Does a Water Filter Cost?

Faucet-Mounted Filter: $15-$50 Under-Sink Filter: $100-$600+ Whole-House System: $500-$10,000+
Household water filtration systems typically use a filtration process (the water passes through a barrier that traps larger undesirable particles) and/or reverse osmosis (pressurized water is squeezed through a special selective membrane). The Maine Department of Health and Human Services provides an overview.Typical costs:
  • A domestic water filter can be as basic as a pitcher that holds 5 cups of water or as complex as a system that filters the whole household water supply. Consumer Reports describes the various types of water filters available. A 5-10-cup pitcher holding or an 18-23-cup dispenser with a spigot, both of which use a carbon filter to remove bad tastes and odors from a small quantity of water, can cost between $7 and $50, depending on capacity, style, and features such as a “replace filter” indicator, are examples of the types of water filters available to consumers. For example, the Clear2O Original Water Pitcher CWS 100A holds nine cups of water, connects directly to a kitchen faucet for filling, fills/filters in 34 seconds, and costs between $10 and $24
  • The ZeroWater ZD-023 23-Cup Water Dispenser and Filtration System costs between $38 and $40
  • And the Clear2O Original Water Pitcher CWS 100A holds nine cups of water, connects directly to a kitchen faucet for filling, fills/ A faucet-mounted water filter, which employs a filtering technique, normally costs between $15 and $50. However, depending on the brand and features like as several filters (two-stage or three-stage) and infusing fruit tastes into the filtered water, some can cost as much as $100 or even more. The Pur FM-9400B 3-Stage Horizontal Mount Faucet Water Filter with an electronic filter indicator has a suggested retail price of $32-$40 dollars. Although they may not fit all faucets, most faucet-mount filters are quite straightforward to install on a regular kitchen faucet
  • A countertop type connects directly to a typical kitchen faucet, but the filtering unit is located on the counter. These normally range in price from $30 to $300, depending on the number of filters and the amount of water they hold. For example, the Aquasana Countertop Water Filter AQ-4000with dual filter cartridges filters up to 30 gallons per hour and costs $100
  • Under-sink water filters can cost anywhere from $100 to $600 or more, depending on the capacity, the number of contaminants they remove, and the type of contaminants they remove. With an under-sink filtration system, the filtration device is concealed in a cabinet beneath the sink, out of sight. They purify water using a filter or reverse osmosis process, and their installation often necessitates cutting into the existing plumbing lines. Water is processed at a rate of up to 30 gallons per hour by the Aqua-Pure DWS100 Compact Undersink Drinking Water System, which has dual-stage filtration as well as a filter indicator and costs between $290 and $300. Professional installation can add $100-$300 to the entire cost
  • However, some sellers include installation in their prices, and this can also be a do-it-yourself operation if you have the necessary skills. Using basic to intermediate plumbing abilities, including soldering pipe connections, ThisOldHouse.com describes how to install an under-sink water filter, predicting that it will take two to four hours and two to four hours. A whole-house water filtration system, also known as a point-of-entry system, filters the water as it enters the house through the main supply pipe or other entry point. Systems that combine both filtration and reverse osmosis, as well as a water softener, a tankless water heater, and other water treatment or distribution devices, can range in price from $400 to $1,500 for a single unit to $10,000 or more for an entire system. Unless otherwise specified, professional installation (plumbing and electrical) is often necessary and can add $100-$500 or more to the total cost of the system, depending on the extent of the work required. The installation of its EQ-300 water filter, for example, is estimated to take one to two hours and cost between $100 and $200 (and the warranty requires installation by a licensed plumber)
  • While Remco Engineering in California estimates that the cost of installing a complete household reverse osmosis system ranges between $300 and $400 on average
Related articles:Water Testing and Treatment,Water Softener,Plumber,Handyman
Additional costs:
  • The cost of testing water samples to determine whether or not home water should be filtered ranges from a modest price at government or university laboratories to $50-$500 or more at commercial labs, depending on the amount and kind of chemicals analyzed. Purchasing replacement filters or cartridges can be expensive, with prices ranging from $3-$20 per cartridge or pitcher for faucet-mount devices to $100-$300 per cartridge or pitcher for whole-house systems.
  • The cost of testing water samples to determine whether or not the home water requires filtration ranges from a modest price at government or university laboratories to $50-$500 or more at commercial labs, depending on the amount and kind of chemicals analyzed. Purchasing replacement filters or cartridges can be expensive, with prices ranging from $3-$20 per cartridge or pitcher for faucet-mount devices to $100-$300 per cartridge or pitcher for whole-home systems.
CostHelper News
What People Are Paying – Recent Comments
Posted by:Caulin in Sarasota, FL. Posted:September 10th, 2020 06:09AM
Type of Water Filter:Whole House Brand:SpringWell Water
Store: Great system and was easy to install with their installation kit
Posted by:Patricia McCormick in Dallas, TX. Posted:April 13th, 2019 02:04PM
Type of Water Filter:EWS Brand:EWS
Store:internet
plumbers charged 3500 to install ews system that cost 2000
Posted by:totally frustrated in palm beach, FL. Posted:April 29th, 2016 08:04AM
Type of Water Filter:whole house/well Brand:aquasana
Store:the makers
wasted money the system was installed in september and by november i had to change filters and there is rust and rotten egg scent.
External Resources:

More Articles on the Subject of the Home and Garden

Check Out All Costs for Home and Garden How Much Does Pressure Washing Cost? How Much Does a Central Air Conditioner Cost? How Much Does a Deck Cost?
CostHelper is based in Silicon Valley and provides consumers with unbiased price information about thousands of goods and services. Our writers are experienced journalists who adhere to our stricteditorial ethics policy.

Whole House Water Filter & Installation Costs

Most households spend between $1,400 and $2,100 to have a water filtration system professionally installed. Prices range from around $360 for a basic DIY system to more than $3,500 for a professionally fitted system that includes sophisticated filtration technologies, among other things.

Average Cost of Home Water Filtration System Installation

Having a professional water filtration system professionally installed for your entire home would cost around $1,765. It covers the cost of an initial water test performed by a local contractor, the cost of the water filtration system, the cost of installation labor, and all materials required to finish the job. Average The cost of doing it yourself is $360. The average cost of a contractor’s installation is $1,765. Installed costs range from $1,400 to $2,100 on average. The most recent update was made on Wednesday, January 12, 2022.

Overview of Whole House Water Filtering Systems

Impurities in drinking water range from iron, which stains fixtures and is little more than a nuisance, to PFAS and PFOS, which are toxic chemicals that can cause major health problems if consumed in large quantities. Because of increased public awareness of the dangers of drinking contaminated water, installing a whole-house filtration system has become one of the most popular interior home renovation projects. In addition to cost variables and retail costs, this whole home water filtration system cost estimate also incorporates pricing estimates from additional credible cost sources.

Expenses reported by homeowners are included — and you are asked to return and share the costs of your improvement as well.

Product and Installation Supplies Cost Details

Among other things, the sort of whole-house water filter system you pick will influence the cost.

  • Systems of many types are available. Sediment filters are the least expensive, but they are not intended to remove microscopic particles or harmful chemicals like as PFAS or arsenic. When water is examined for impurities, reverse osmosis systems($$-$$$) are often advised if major pollutants are discovered during the testing process. When used in conjunction with other filter types, activated carbon filters ($$-$$$) are the top sellers, with the broadest variety of cost available based on the capacity and functions they provide. They are effective in removing a wide variety of pollutants. Systems that include a salt-free water softening component ($$$-$$$$$) are the most expensive, but they also deliver the greatest water treatment. How Effectively Does It Work? Filters – Sediment (silt, dirt, rust, minerals) is assessed according to the size of the particles it removes, measured in microns. Chemical filters are measured in parts per million, or ppm, of the contaminants they remove. The higher the expense of filtration, the better the filtration
  • The Use of a Pre-filter — Many systems employ paper filters, which are sometimes referred to as pre-filters when used in conjunction with a carbon or reverse osmosis (RO) filter system. System Capacity –The capacity of a system is measured in gallons that can be filtered before the filter needs to be changed. Typical system capacities are in the 50,000 to 150,000 gallon range. They are also evaluated according to the number of gallons per minute (GPM) that they can filter. A residential water filtration system filters between 8 and 15 GPM of water. Three filters are the most frequent configuration for a filter. Typical systems include a polypropylene filter to remove big debris, an activated carbon filter to remove chlorine and other undesired chemicals, and a filter intended to remove heavy metals from the water. These systems are the most expensive, especially when the amount of filtering is considerable. Who Installs the System — Most homeowners hire a professional to do this, however some systems may be installed by someone with minimal plumbing knowledge. For more information, see our Do It Yourself or Not section below, or look at alternative plumbing repair project costs. Where you live is important. Installation labor costs are greater in big metropolitan areas, particularly on the coasts, than they are in small towns and rural regions
  • This is especially true for new construction. Whether or not water testing is included in the price – Testing kits range in price from $15 for do-it-yourselfers to $200 or more for professionals. Obviously, the greater the number of pollutants tested for, the higher the expense. However, you will get additional knowledge that you may put to use in order to select the most appropriate filter for the impurities in your water. Some local water agencies provide testing at no cost or at a discounted cost. For example, several water filtration system vendors such as Culligan and Kinetico will provide free water testing services. Expect the findings of the tests to be accompanied by a persuasive sales pitch for their expensive water filtration equipment.

Note on “Free” Water Testing: Home Depot and other home improvement retailers occasionally provide “Free” water test kits to customers. You fill a little vile with water from your house and mail it to the lab with the postage already paid. It is common for these tests to merely check for hardness and not for any impurities – albeit the box may not explicitly say this. You will receive a phone call from a local water filtration firm within a few weeks of submitting your water sample. The company will attempt to sell you a water filtration system.

Here’s a helpful article on how to decide which water tests to order: How to Decide Which Water Tests to Order.

Cost of Water Filter Installation Supplies

In order to determine pricing for water filtration systems, we conducted a survey. The cost of installation is discussed in the next section. The following are the retail prices for whole-house water filters.

  • A paper or polypropylene filter (pre-filter) with housing cost $50 to $115, whereas single carbon filters cost $350 to $2,500, with a carbon main filter costing $350 to $2,500. Carbon and Sediment Filters for metals such as iron and manganese range in price from $400 to $850. $800 – $1,200 |Reverse Osmosis Systems
  • $20 – $100 |Replacement Filters or Filter Cartridges composed of paper ($), polypropylene ($-$$), or carbon ($$)
  • $800 – $1,200 |Reverse Osmosis Systems
  • $800 – $1,200 |Reverse Osmosis

Consider the cost of replacement filters when evaluating the cost of a whole-house water filtration system, as a rule of thumb.

The frequency with which you change filters is determined by the volume rating of the filter, the amount of water you use, and the quantity of contaminants in the water. It is normal practice to replace filters on a monthly to annual basis.

About Water Filter Systems

You have a plethora of possibilities at your disposal. The majority of whole-house water filtration systems are equipped with several filters. The following are the most often encountered kinds in single-filter and combination systems:

  • Paper and polypropylene are two of the most often used materials. In order to prevent big sediment from clogging and shortening the life of more expensive filters, pre-filters($) are employed to remove it from the water. These filters can be put individually or in multiple-filter systems
  • They can also be combined to form larger systems. Sediment filters are used to remove silt and tiny particles of sediment ($-$$)
  • Filter with Carbon Make use of activated carbon granules and/or carbon block to remove chlorine, which is widespread in municipal water sources, along with other sediment, silt, and pollutants such as volatile organic compounds (VOCs) and herbicides, which can produce odor and foul taste ($-). Using Ultraviolet Lights to destroy bacteria and cleanse water can cost between $$ and $$$. The combination of filtration and water softening devices is appropriate for hard water – water that has a high concentration of minerals. These are systems that are used in conjunction with one another. Systems that remove common pollutants such as nitrate, iron, and arsenic ($$-$$$) are known as reverse osmosis systems. These systems do not normally employ many filters
  • Instead, they employ a single filter.

In the majority of situations, homeowners first have their water tested and then select a filter system that is intended to eliminate the toxins and amounts of contaminants detected in their water supply.

Top Whole House Water Filter Brands

There are firms who make water filtration systems, and then there are companies like Culligan and Kinetico that sell you the entire package, including the installation. This is a list of companies that make products. You purchase the system and then either do it yourself or hire a professional to install it.

  • Apec Top Tier filtering systems are a collection of several components. The most modern systems comprise a reverse osmosis membrane, poly or paper pre-filters, and carbon filters
  • Aquasanahas systems for both city water and well water
  • And Aquasanahas systems for both city water and well water. Its filters can be used in conjunction with one another. Example: If you start with a basic carbon filter, you can expand the system to include a UV lamp or a salt-free softer
  • If you start with a basic carbon filter, you can upgrade to a salt-free softener
  • Express Water is a competitor in the market for combination filters. Many of its filter systems include a KDF – kinetic degradation fluxion – filter made from copper/zinc alloys to remove heavy metals, microorganisms, and scale
  • ISpringsells combination filter systems, which are typically comprised of a polypropylene 5-micron sediment filter and carbon block or granular carbon filters
  • And iSpringsells single-stage filter systems, which are comprised of a polypropylene 5-micron sediment filter and a Affordable combination systems and high-end, high-capacity residential water filtration systems are produced by Pelican for use in highly contaminated water systems in residential settings. Pentek is a market leader in single paper and poly filters in plastic housings that are reasonably priced. They are excellent at removing minerals, but they are ineffective in removing extremely small particles, chemicals, and volatile organic compounds (VOCs).

Permits, Inspection, Related Costs and Installation Time

  • Installing a whole-house water filtration system does not necessitate the acquisition of a permit.

Related Costs and Installation Time

  • Installation of a whole-house water filtration system takes 1.5 to 3 hours.

DIY or Hire a Pro?

These filtration systems are intended to be installed quickly and simply by a professional in a few of hours. The most difficult part of doing it yourself is soldering the fittings together for a strong connection, as demonstrated in a This Old House video. Watch the video, and if you already possess the talents exhibited or are determined to learn them, give it a try. Otherwise, professional installation is a cost-effective option, and we encourage that you use it.

Water Filters Prices: How Much Does a Whole House Water System Cost?

What is the price of a water filtering system in dollars? The quick answer is that it is dependent on the situation. For less than $100, you can acquire a high-quality under-sink filter that will last for years. On the other hand, a full house water filter might cost anywhere between $500 and $3,000 dollars. Despite the high cost, don’t let it dissuade you. Finally, water filtration systems are a very cost-effective buy, as we shall demonstrate below. Domestic water filters utilize a mix of physical and chemical methods to remove or minimize impurities present in water, however some need an upfront financial outlay of some sort.

The cost of a water filter is determined by the following factors:

  • Installation and maintenance costs
  • Cost of the filtration system
  • And other costs.

These considerations will be further complicated by the sort of system being installed, the specifics of the installation procedure, and the type of maintenance that will be necessary.

Water Filtration System Price Breakdown

We must take into account the kind of filtering system in order to obtain an appropriate representation of the pricing. Water filters are available in a variety of configurations, but they are first divided into two categories: point-of-use and point-of-entry.

Point-of-Use (POU) vs Point-of-Entry (POE)

Point-of-use systems are designed to deliver filtered drinking water to a single place. A POU system, for example, is a countertop or under-sink water filter. A Point-of-Entry system distributes filtered water throughout your whole home or building. POE filtration is obviously more expensive than POU filtration, owing to the fact that they are larger and produce more. Because they require a greater volume of filtering material, as well as more extensive installation and maintenance, they are more expensive than POU filters.

Filtration Types

Point-of-use systems are designed to deliver filtered drinking water to a single point of usage. Example of a POU system is a countertop or under-sink filter. Water is delivered to your whole home using a Point-of-Entry system.

It goes without saying that because POE filtering is bigger and produces more output than POU, it is more costly. They need a greater volume of filtering medium, and their installation and maintenance are more involved than those of POU filters, which are more straightforward.

Are Whole House Water Filtration Systems Worth It?

In the event that you are concerned about the contaminants in your water and it tastes or smells funny, a whole home water filter may be the solution for you. There are several advantages to using a whole-house water filter, including:

  • You may benefit from a whole home water filter if you are concerned about the contaminants in your water and it tastes or smells funny. Whole home water filters provide several advantages, including the following:

Here are a few disadvantages of installing a whole-house system:

  • It is more expensive in terms of cost and installation than other filtering technologies
  • It is possible that there is a lack of available space.

In comparison to other filtering technologies, the cost and installation are more expensive; It is possible that there is a shortage of space.

Two Top Brands: SpringWell and Aquasana Price Comparison

SpringWell and Aquasana are two of the most well-known names in the water filtering business. Let’s take a closer look at each company’s whole-house filter to see how the advantages and disadvantages compare.

SpringWell’s Whole House Water Filter System

Water filtration company SpringWell has more than 20 years of expertise in the industry and is dedicated to its aim of providing every household with the purest water possible at the most affordable pricing. In addition to being a 1,000,000-gallon system, the Whole House Water Filter makes use of certified tanks and media to successfully filter typical impurities from city water while causing no reduction in water pressure. Filtration of water: Utilizing high-quality catalytic coconut shell carbon and certified KDF media, SpringWell’s four-stage filtering method eliminates up to 99.6 percent of pollutants, including but not limited to the following:

  • Sediment, chlorine, and heavy metals are all contaminants. Organic pollutants such as volatile organic compounds (VOCs), pesticides, and herbicides
  • The optional add-on UV system effectively eliminates 99 percent of dangerous germs, bacteria, and viruses.

This system provides for the greatest contact time with any water system on the market, providing you with several lines of defense to filter and purify your water to the highest possible quality level. This filter not only removes hazardous particles, but it also eliminates odors and enhances the flavor of the water. It should be possible to install this filter for anyone who have some basic plumbing knowledge. SpringWell includes a comprehensive installation guide as well as instructional videos to walk you through the process.

  1. Once installed, this system has a one million gallon capacity and is expected to survive for around 10 years.
  2. The Whole House Water Filter System retails for $1643.00 at the time of publication.
  3. At the time of this writing, they have cut the price by more than half, to just $793.60!
  4. If you want to completely eliminate all germs and viruses, this is an optional add-on that is well worth the money.
  5. All of these benefits should be taken into consideration when calculating the entire cost.

Consider whether or not you will need to employ a professional to complete the installation. Replacement of the 5-micron pre-filter should be done every 6-9 months. When purchased through SpringWell, a two-pack of these costs $39.95. Pros:

  • Designed to filter water up to 1,000,000 gallons while maintaining water pressure between 9 and 20 gpm. Removes microorganisms, pollutants, and heavy metals from the environment
  • Compared to any other device on the market, it provides the maximum interaction time. Low maintenance requirements
  • Six-month money-back guarantee and a lifetime warranty are included.
  • It is possible that you may need to employ a plumber to install this system. There is no replacement filter included in this package.

Aquasana Whole House Filter: “1,000,000 Gallon Rhino”

Founded in 1997 in Austin, Texas, Aquasana is a water filtration company that takes pleasure in offering high-quality water filtration systems at competitive pricing. Aquasana’s Whole House Filter System, the 1,000,000 Gallon Rhino, works in a similar way as SpringWell in that it distributes great-tasting, healthful water throughout your house for up to a million gallons or 10 years. Filtration of water: The 1,000,000 Gallon Rhino is equipped with a sediment pre-filter, a copper-zinc mineral stone, an activated carbon filter, and a post-filter to effectively remove impurities such as those listed below:

  • The sediment contains 97 percent chlorine, heavy metals such as lead and mercury, herbicides and pesticides, volatile organic compounds (VOCs), and organic pollutants.

Also available as optional add-ons for this system are the following features: The UV filter, which protects against extra germs and viruses and has been certified by the National Sanitation Foundation (NSF) to remove up to 97 percent of chlorine. In order to prevent minerals from bonding together and forming scale build-up in your pipes and appliances, the salt-free conditioner system makes use of Scale Control Media (SCM). Installation and upkeep are two separate tasks. Although you may install the 1,000,000 Gallon Rhino on your own, a registered plumbing professional will be required to do it in order to ensure that the 10-year guarantee is valid.

  • Depending on how much water is used, the 10″ pre-filters will last 1-3 months and the 20″ filters will last 2-3 months.
  • It is usual for filtration systems to see a slight decrease in pressure, with the average being 6-7 GPM.
  • It costs $1598.00 to purchase a 1,000,000 Gallon Rhino at the retail level.
  • Currently, this system is available for $799.00, which is a 50 percent savings.
  • The Pro Upgrade Install Kit is another consideration.
  • For example, the pre-filters that are provided are 20 inches in length rather than the typical 10 inches.
  • Free delivery is provided by Aquasana, as is a 30-day money-back guarantee as well as a ten-year warranty.
  • In order to qualify for the ten-year guarantee, you will almost certainly need to include in the expense of expert installation when purchasing this system, which is not cheap.

Finally, a four-pack of 20-inch filters will set you back $29.95. These filters should be updated every 2-3 months, if not more frequently. Pros:

  • 1,000,000 gal/ten years capacity
  • Removes 97% of chlorine as well as other dangerous contaminants
  • 1,000,000 gal/ten years capacity
  • Combination system with filter and salt-free conditioner is included. System that requires less maintenance
  • Money-back guarantee for the first 90 days
  • It is possible that the water flow rate will decrease. A professional must do the installation in order to trigger the ten-year guarantee.

Cost Breakdown

Let us have a look at an estimate of the complete cost breakdown of the whole house filtration systems offered by SpringWell and Aquasana. Both of them filter a million gallons of water every year. Both have filter media that is equivalent. Both techniques are incredibly effective in their respective fields. The cost is approximated based on the retail price. Both firms have regular sales, so you’re likely to be able to acquire them for a far lower price. SpringWell:

  • $1643.00 for the filter
  • Two replacement filters for $39.95 each
  • Change every 3-6 months
  • Shipping is included. Tanks and valves are covered by a 6-month money-back guarantee as well as a lifetime warranty. The cost of expert installation ranges from $872 to $2,768 depending on the parameters involved.
  • Replacement filters are available for $29.95 per set of four
  • They should be replaced every 2-3 months. Shipping is included. Warranty: 3-month money-back guarantee/lifetime warranty on the system if it is installed by a professional
  • The cost of expert installation ranges from $872 to $2,768 depending on the parameters involved.

Replacement filters are available for $29.95 per set of four (change every 2-3 months); shipping is included. Warranty: 3-month money-back guarantee/lifetime warranty on the system if it is installed by a qualified expert. A professional installation will cost between $872 and $2,768 depending on the conditions involved.

Where Do I Buy a Water Filter System?

Those seeking for a high-quality whole-house filter might consider theSpringWell Whole House Water Filter System, which we believe is a great choice. You may read our review at the top. Are you unsure if you require a whole-house filter system? Check out the WaterDrop Reverse Osmosis Filter WD-G3-W if you have a similar issue. Its tankless design, seven stages of filtration, and 400 gallons per day capacity make it an excellent choice for sink water filtering applications. The AquaTru Reverse Osmosis Countertop Water System is a fantastic countertop reverse osmosis system.

Its sleek, contemporary design is a great complement to any kitchen counter.

Amazon is an excellent location to check around, read reviews, and analyze the advantages and disadvantages of various water filtration systems before making a decision.

  • Is it Really Effective to Use Alkaline Water Pitchers? The Best Guide to Alkaline Water Pitchers

How Much Do Water Filters Cost

Alkaline Water Pitchers: Do They Really Work? The Best Guide to Alkaline Water Pitchers

Water Filter Cost Breakdown

The cost of a water filter varies depending on a variety of factors. Some of these considerations include which sorts of water filters you intend to install and how much alteration to your current plumbing will be required in order to install your chosen system. Additionally, most water filtration systems require some level of continuous maintenance, which should be added into the total cost as part of the overall calculation.

Type of System

There are several elements that influence the price of a water filter. Among these considerations are the sorts of water filters you intend to install as well as the amount of plumbing alteration that will be required to accommodate your new system’s installation. Aside from that, the majority of water filtration systems require some level of continuous maintenance, which should be incorporated into the overall cost.

Complexity of Installation

The cost of a water filter varies depending on a variety of factors. Some of these considerations include which sorts of water filters you intend to install and how much alteration to your current plumbing will be required in order to install your desired system.

Furthermore, most water filtration systems require some level of continuous maintenance, which should be incorporated into the overall cost.

Ongoing Expenses

Take into account any continuing expenditures associated with your water filtration system as part of your decision. Many reverse osmosis systems will require you to change the filtration media in the system on a regular basis in order for it to continue to run at full efficiency. The frequency with which you must change filters in your water filtration system will be determined by the type of system you are using and the type of home water filtration media that is included inside it. Pre-installation research should include a thorough grasp of how often you will need to change the water filters and how much each of them will cost.

Pre-filters remove big particles and silt from the water, followed by a semipermeable membrane that eliminates the bulk of impurities and an activated carbon filter that removes chemicals such as chlorine and disinfectants that cause tap water to taste and smell foul.

Final Thoughts

Despite the fact that it is hard to offer a thorough analysis of how much reverse osmosis filters cost, there are a few major aspects that can impact the price of reverse osmosis filters. The first factor to consider is the size and complexity of the system. For the most part, a complete house water filtration system will cost more than a system that is only intended to give clean water at one specific faucet or faucets in your home. Regardless of the option you pick, you can be assured that your water supply will be pure and free of any unpleasant taste or odor.

The installation of a smaller point-of-use system might be difficult in some situations due to space restrictions.

Our filtration systems, on the other hand, should be installed by a Rayne specialist if possible.

Last but not least, remember to factor in the continuous expenses of system maintenance.

Take the time to learn about your system’s maintenance plan, as well as the cost of any new filters that may be required.

To receive an exact estimate of the cost of a clean water filtration system, it is important to seek a quote from a reputable company. To learn more about our RO systems and to receive a free estimate for a water filtration system, please contactRayne Watertoday. Sources:

Leave a Reply

Your email address will not be published.