2022 Cost to Replace a 50-Gallon Water Heater
Water heaters are essential components of any household. They provide you with the hot water you require for bathing, cooking, cleaning, and washing your clothing. A variety of types and models of water heaters are available, with the tank-style heater being one of the most popular and least expensive to install. An electric tank-style heater allows you to store a specific volume of water that can be utilized whenever you need it. Hot water heaters with a capacity of 50 gallons are intended to hold 50 gallons of hot water and dispense it as needed.
These heaters can be powered by electricity, natural gas, or liquid propane, and they can be put in a variety of locations within your home.
The cheap cost of this repair is $620 for the replacement of a 50-gallon electric hot water heater in an open and easily accessible location.
50-Gallon Water Heater Cost Calculator
Water heaters are essential components of any household. These facilities provide you with the hot water you require for bathing, cooking, cleaning, and laundry. Various models and designs of water heater exist, with tank-style heaters being the most popular and least expensive to install among them. An electric tank-style heater allows you to store a specific volume of water that may be used as needed. Hot water heaters with a capacity of 50 gallons are intended to retain and provide hot water as needed.
Heaters such as this may be used in a variety of locations throughout your house and are powered by electricity, gas, or liquid propane.
It will only cost you $620 to replace a 50-gallon electric hot water heater in an open and easily accessible section of your home.
| 50-Gallon Water Heater CostsZip CodeGallons | |||
|---|---|---|---|
| Basic | Standard | Best Quality | |
| 50-Gallon Water Heater Cost (Material Only) | $350 – $600 | $700 – $1,700 | $1,800 – $2,300 |
| 50-Gallon Water Heater Installation Cost (Labor Only) | $270 – $350 | $400 – $600 | $600 – $1,500 |
| Total Costs | $620 – $950 | $1,100 – $2,300 | $2,400 – $3,800 |
| 50-Gallon Water Heater Cost per Gallon | $12.40 – $19.00 | $22.00 – $46.00 | $48.00 – $76.00 |
Electric hot water heaters are often the least expensive to purchase and install, but they might be more expensive to operate in the long run due to their higher energy consumption. Gas and propane heaters are less expensive to operate than electric heaters, but they may be more expensive to install. Gas and propane heaters are also available in a variety of efficiencies, which increases their initial setup costs while simultaneously cutting their long-term expenditures.
Additionally, the ease with which the area may be installed and whether or not alterations are required have an influence on the final project expenses. Installers of 50-gallon water heaters in my area are competing for your business.
Additional Considerations and Costs
- Manufacturers of repute. 50-gallon hot water heaters are quite widespread and are manufactured by a large number of companies. Rheem, Bosch, Reliant, and Bradford White are among the manufacturers.
- Lifespan. Typically, a tank-style hot water heater has a lifespan of 10 to 15 years, while some can survive much longer. Maintenance. Hot water heater maintenance is relatively straightforward, and it just needs periodic draining of the tank to clear out any particles that have accumulated at the bottom. Mounting. 50-gallon hot water heaters are large enough that they must be installed on a concrete floor2. This implies that you will want floor space for the installation. Piping. A permit may be required if you require more pipe to transport hot water from your heater to your residence. The cost of new plumbing is between $8 and $10 per linear foot
- In most regions, no permits are required for the installation of hot water heaters. This varies from municipality to municipality, so always double-check with your plumber or your local government for the most up-to-date information.
FAQs
- What is the approximate cost of replacing a 50-gallon water heater?
Replace a 50-gallon hot water heater on average can cost between $800 and $2,500, depending on the fuel type and how efficient the system is. The average 50-gallon hot water heater has a lifespan of between 10 and 15 years, with some models lasting up to 20 years.
- The average 50-gallon hot water heater has a lifespan of 10 to 15 years, with some models lasting much longer.
The average 50-gallon hot water heater has a lifespan of between 10 and 15 years, with some models lasting up to 30 years.
- Is a 50-gallon hot water heater sufficient for a household of four people?
Yes, as long as you just require a reasonable amount of hot water. When installing a performance shower or jetted tub, it is possible that you may require a bigger hot water heater.
- Is a 50-gallon water heater preferable than a 40-gallon water heater
A water heater with a capacity of 50 gallons is not always superior, but it will give more hot water. If you find yourself running out of hot water on a regular basis, upgrading to a 50-gallon tank may be beneficial.
Remodeling Terms Cheat Sheet
Definitions in layman’s words, cost considerations, illustrations, and other information you should be aware of. See the whole cheat sheet. 1Propane is a hydrocarbon gas that is commonly employed as a fuel source. 2Mounting: A structure to which something is fastened or hung. 3Mounting: A structure to which something is affixed or hung.
Hot Water Heater Costs & Installation Prices
The average cost of purchasing a water heater is $1,190 dollars. Get quotations from as many as three professionals! Enter your zip code below to get matched with top-rated professionals in your area. Water heater installation, often known as hot water heater installation or just water heater installation, is one of the most popular (and vital!) house modifications. Hot water heater replacement costs can range from $810 to $1,570, and the cost is determined by whether you are performing a straightforward one-for-one exchange or a more involved upgrade to a tankless system.
How Much Does It Cost to Buy a Hot Water Heater?
It costs an average of $1,190 to purchase a water heater in the United States. Get bids from as many as three professionals at the same time. To find top-rated professionals in your area, enter your zip code below. Water heater installation, whether referred to as a hot water heater or just a water heater, is one of the most popular (and vital!) types of home repair projects to do. Depending on whether you want a straightforward one-for-one exchange or a more involved upgrade to a tankless system, hot water heater replacement expenses might range from $810 to $1,570.
The Average Cost of Hot Water Heaters With Installation
- 900 dollars for a 40- to 50-gallon tank
- 3,000 dollars for a tankless system
Additional Hot Water Heater Costs
Assuming all goes smoothly, all you’ll need is a simple water heater exchange—out with the old, in with the new. Some households, however, will require additional services in order to complete the changeover appropriately. The requirements for residential water heaters change from time to time, necessitating frequent modifications. But try not to be concerned about these code upgrades; they are strictly for safety reasons. Your plumber will inform you of the code requirements (and may direct you to other local specialists such as an electrician), which is especially important if you want to convert from a gas to an electric water heater or if you want to relocate the water heater.
For the services of hot water tank installation that you may require for your project, the following are the typical costs:
- Electricians charge between $50 and $100 per hour
- Additional wiring costs between $550 and $2,200
- New gas lines cost between $250 and $800
- New water lines cost between $350 and $1,900
- Required permits cost between $100 and $1,500
- Wall framing costs between $200 and $400
- Drywall installation costs between $1,000 and $2,900
- Water heater removal costs between $100 and $500
How Much Does It Cost to Buy a Hot Water Heater Near You?
Electricians charge between $50 and $100 per hour; additional wiring costs between $550 and $2,200; new gas lines cost between $250 and $800; new water lines cost between $350 and $1,900; required permits cost between $100 and $1,500; wall framing costs between $200 and $400; drywall installation costs between $1,000 and $2,900; water heater removal costs between $100 and $500.
The City or State Average Cost Range
- $750–$1,250
- Dallas:$950–$1,675
- Denver:$985–$1,900
- Houston:$950–$1,600
- Minneapolis:$715–$1,300
- San Diego:$935–$1,600
- San Francisco:$1,050–$1,850
- Seattle:$1,050–$1,700
- Atlanta:$775–$1,350
- Austin, TX:$850–$1,650
- Atlantic City, N.J.:$1,129
How Much Does It Cost to Buy a Hot Water Heater by Type?
Tank and tankless water heaters are the two types of water heaters available. Both types of water heaters generate hot water using either natural gas (natural gas or propane) or electricity. It’s not uncommon for a classic tank water heater to have a huge storage tank that may contain anywhere from 30 to 80 gallons of water. 90 percent of families have a tank hot water heater that is hidden away in a basement or laundry room, and you are not alone. A tankless water heater is about the size of a compact suitcase, and it heats water using a coil system instead of a tank.
As with a heating zone, indirect-fired heaters employ a coil within the tank that is connected to a boiler through pipework.
These tanks are more costly (about $1,000 to $1,500) than typical gas or electric tanks, and they take between four and eight hours to install on average.”
Gas Water Heater Costs vs. Electric Water Heater Costs
Natural gas units, on average, cost $100 to $200 more than electric units and operate at a lower efficiency than electric units. However, if your city’s electric rates are high, the gas alternative will be a more cost-effective option in the long run. In an apartment or a compact area, electric water heaters (both tank and tankless) are the most efficient option since they do not require various types of venting.
Gas Water Heater
- Over a 12-year period, the cost is $5,000. The device ranges in price from $250 to $1,800.
Electric Water Heater
- A total of $5,000 will be spent during a 12-year period. Approximately $250–1,800 for the unit
| Type | Cost |
|---|---|
| Gas Water Heater | $250 – $1,800 |
| Electric Water Heater | $200 – $2,880 |
Average Cost of a High-Efficiency Water Heater
Despite the fact that you use your water heater on a regular basis, you may not be aware that it is the second-highest source of energy usage in your house (an HVAC ranks first). Investing in a high-efficiency water heater is both a cost-effective and ecologically responsible decision. High-efficiency water heaters typically cost between $1,000 and $3,000, including the equipment and installation labor. Their energy efficiency ranges from 100 percent to 300 percent more than that of typical water heaters, and they include features such as high-quality insulation, plastic tanks, and sophisticated controls that detect leaks.
Tankless Hot Water Heater Costs
If you decide that the expense of a tankless water heater is a suitable long-term investment, you’ll spend more up front (about $1,000 to $3,000), but you’ll make up for it in energy savings during the heater’s 20-year life span. Tankless heaters have an additional benefit: they provide on-demand hot water with no waiting time, which is ideal after a chilly day of skiing. But keep in mind that this is not a do-it-yourself job. Because of the gas lines, electrical, and venting involved, it is advisable to leave the installation of a tankless water heater to local experienced installers.
A reasonably easy activity that will assist to extend the life of your heater while also ensuring that your warranty is not canceled.
Tankless heaters are extremely energy efficient, but they are also quite prone to damage if they are not properly maintained. Make sure you speak with your heating contractor about establishing a preventative maintenance schedule for your heater.”
Solar Water Heater Costs
You’ll see a solar water system on any “off the grid” home-building show if you pay attention. The owners save money over time as a result of this technology, although the initial investment is substantial. It costs between $1,800 and $5,500 to install a solar water heater; however, the price can rise to as much as $13,000 depending on the product, installation fees, maintenance expenses, and the availability of a qualified contractor.
Hybrid Heat Pump Water Heaters Costs
If you don’t care about saving space or money, a hybrid heat pump water heater is the best option for your home. This is the most costly choice, with prices ranging from $1,200 to $3,500. However, hybrid water heaters are the most energy-efficient, thus they are the most expensive. However, small dwellings (sorry, tiny-house people) are not the ideal prospects since the water heater requires 7 feet of space from the floor to the ceiling, as well as 1,000 cubic feet of surrounding air to function properly.
Indirect Water Heater Installation Costs
Indirect water heaters range in price from $800 to $1,500 and are a versatile and efficient option. This function is the most popular since it allows you to use a variety of energy sources from a local source. These include gas, oil, propane, electric, solar, or any combination of these. Indirect water heaters generate heat by heating water in a coil within the tank’s interior. Even though the water used to heat that water may be heated by a direct fuel source such as natural gas, oil, or propane, that water that is used to heat the water distributed to your fixtures is heated by the internal water coil (which is typically made of copper, stainless steel, or nickel-plated copper), not by a direct fuel source (hence the term “indirect” heater).
| Type | Cost |
|---|---|
| High-Efficiency Hot Water Heater | $1,000 – $3,000 |
| Tankless Hot Water Heater | $1,000 – $3,000 |
| Solar Water Heater | $1,800 – $13,000 |
| Hybrid Heat Pump Water Heater | $1,200 – $3,500 |
| Indirect Water Heater | $800 – $1,500 |
What Factors Influence the Cost of a Hot Water Heater?
Hot water heaters require a lot of space in order to function properly. If you’ve been thinking about having a yard sale to clear out the basement, there’s no better time than now to do it in order to create way for an upgraded water heater. The gallon size is another element that determines the cost of the unit and the installation.
Location of the Hot Water Heater
Most homeowners purchase a new water heater only after their current one fails, and this usually occurs at an inconvenient time—for example, when you have houseguests who love hot showers. A hot water heater upgrade or a relocation of your hot water heater is most likely in order. The position of the hot water heater might be changed by homeowners in order to conserve space or make way for additional changes. If you choose for a tankless unit, the position of the installation may be altered as well.
Water Heater Sizes
Water heaters are typically purchased when an existing one fails, and most often at an inconvenient time—for example, when you have houseguests who enjoy warm showers. A hot water heater upgrade or a relocation of your hot water heater are both likely. In order to conserve space or create place for additional repairs, some homeowners prefer to relocate their hot water heater.
It’s possible that the installation position will vary if you pick a tankless unit. If the water heater is not properly housed, it may necessitate the installation of new venting, piping, and modest carpentry work.
Tank Water Heater Measured by Gallons
- 1 person need 20–30 gallons
- 2–3 people require 30–40 gallons
- 4–5 people require 40–50 gallons
- And 6 or more people require 55 gallons or more.
Tankless Water Heaters Measured by Gallons Per Minute
- For one individual, 20–30 gallons of water will be used in 2–3 minutes. 2–3 people: 30–40 gallons in 3–5 minutes
- 4–5 people: 40–50 gallons in 4–6 minutes
- 6+ people: 55 gallons in 5–6 minutes
Getty Images photo by brizmaker from the iStock collection.
FAQs About Water Heater Costs
Even though most people wait until the last minute, you should consider purchasing a hot water heater if you begin to see the telltale indications of approaching failure. Keep in mind that the lifespan of a normal tank water heater is eight to twelve years, depending on the model. Here are a few red flags to look out for:
- Metallic aftertaste water that is rusty or stained
- Water does not heat sufficiently, but just warms
- Pops and cracks that make a lot of noise
- Leaks
How can I extend the life of my water heater?
Tastes metallic; Drinking water that is rusted or discolored Water only heats and does not heat sufficiently; Pops and cracks that make a lot of noise. Leaks;
How do I find a professional to install my hot water heater?
a metallic flavor; water that is rusted or stained Water does not heat sufficiently, but rather just warms; Pops and cracks that make a lot of noise Leaks;
50 gallon gas water heater
Ships to the Netherlands are available. There are only 2 left in stock, so act quickly. extremely well-liked sponsored | based on the number of customer ratings and the number of stars Sketch was used to create this design. Sponsored Shipping is $109.62. This item is currently out of stock. Ships to the Netherlands are available. Order quickly as there are only 5 left in stock. Ships to the Netherlands are available. Only 11 of these items are left in stock – purchase soon. A $59.00 discount was applied at the time of purchase.
- Ships to the Netherlands are available.
- Ships to the Netherlands are available.
- A 5% discount is applied at the time of purchase.
- At the time of purchase, a $10.00 discount was applied.
- Ships to the Netherlands are available.
- It’s yours.
- With the coupon, you may save $10.00.
With the coupon, you may save $10.00.
There are only 13 items left in stock (more on the way).
With the coupon, you may save $10.00.
With the coupon, you may save $10.00.
Only 15 of these items are left in stock – purchase soon.
How Much Does Water Heater Installation And Replacement Cost?
Note from the editors: We receive a commission from affiliate links on Forbes Advisor. The thoughts and ratings of our editors are not influenced by commissions.
Water Heater Costs
Replacement of a water heater typically costs $1200, which includes both the cost of the new unit and the cost of labor. As cheap as $815 might be obtained by bargain hunters who are looking for a good deal. High-end systems can cost upwards of $10,000 or more, depending on the type of water heater used, the location of the installation, and other factors that we’ll discuss in further detail later. Additionally, you may be interested in the tankless water heaters available at Home Depot. Testimonials from customers Exceptionally well-written Performance Platinum 9.5 GPM Liquid Propane Water Heater by Rheem Performance Platinum 9.5 GPM Liquid Propane Water Heater by Rheem 3Rinnai RU199iP RU Model Series 3Rinnai RU199iP RU Model Series 3Rinnai RU199iP RU Model Series 3Rinnai RU199iP RU Model Series 3Rinnai RU199iP RU Model Series Testimonials from customers Exceptionally well-written 3Rinnai RU199iP RU Model Series 3Rinnai RU199iP RU Model Series 3Rinnai RU199iP RU Model Series 3Rinnai RU199iP RU Model Series 3Rinnai RU199iP RU Model Series 4Rinnai V53DeP V Model Series 4Rinnai V53DeP V Model Series 4Rinnai V53DeP V Model Series 4Rinnai V53DeP V Model Series Model Series: Rinnai RL75eP RL Model Rinnai RL75eP Testimonials from customers Exceptionally well-written Model Series: Rinnai RL75eP RL Model Rinnai RL75eP If you’re considering purchasing a propane tankless water heater, you may feel overwhelmed by the number of options available.
Price, customer rating, maximum GPM, heating capacity (in BTUs), and Energy Star certification were all taken into consideration while compiling this top-five ranking.
Hot Water Heater Installation Prices
Replace a water heater entails a number of elements that all influence the ultimate project cost, starting with the size and kind of unit that is used and progressing from there.
Tank vs. Tankless
The cost of replacing a water heater is influenced by a number of factors, the first of which is the size and kind of unit being replaced.
Tank Size or Tankless Water Heating Capacity
The size of the water heater has an impact on the cost as well. Typical tank-style heaters have storage capacities ranging from 20 to more than 80 gallons, with most households opting for a 40 or 50-gallon capacity. The size of a tankless water heater is measured in gallons per minute, with a flow rate ranging between two and six gallons per minute (gpm). For the majority of households, a greater flow rate of four to six gpm is advised. Make certain that the replacement unit you purchase will provide adequate hot water for the amount of people who will be living in the house.
Gas vs. Electric
Depending on the model, water heaters are powered by gas (natural gas or propane) or electricity. Heat is given either by a gas flame or by an electric coil, depending on the application. Compared to gas water heaters, electric water heaters cost between $100 and $200 less. Nonetheless, because of the greater cost of electricity and the lower cost of natural gas and propane in many parts of the nation, gas water heaters are frequently more cheap over the course of the unit’s useful life. Electric water heaters are still an excellent solution for tiny or limited spaces since they do not require any venting to function properly.
Direct Vent vs. Power Vent
Gas water heaters create exhaust that must be vented either directly overhead through a vent flue or through a power vent blower to provide proper ventilation. Unlike indirect vent water heaters, direct vent water heaters exhaust through a flue pipe located above the device. You should budget an additional $500 to $1,000 to build the vent pipe if you are replacing an electric water heater with a direct vent natural gas water heater. Power vent water heaters employ a fan to blast exhaust out through vent pipes, which is a more environmentally friendly option.
When compared to a direct vent system, this method provides greater flexibility in terms of where the unit may be installed while also being more energy efficient.
Labor Cost to Install a Hot Water Heater
In addition to the cost of the device, the labor fee accounts for a significant amount of the total installation cost.
Prices for labor might range from $150 to $1,000 or even more per hour. They vary depending on the hourly rate of the installer, the size and kind of water heater being installed, and the location of the installation.
Cost Per Hour
Along with the cost of the unit, labor charges account for a significant amount of the total installation cost. Prices for labor might range from $150 to $1,000 or even more each day. They differ depending on the hourly rate of the installer, the size and kind of water heater being installed, and the location of the installation site.
Average Hours Per Water Heater Type
Replacement of tank-type water heaters, whether gas or electric, takes around three hours in most cases. The installation of a tankless water heater will take between eight and ten hours. If you are switching from a gas to an electric water heater, or vice versa, or if you are moving the water heater to a new location in the house, this can significantly increase the length of the job and may even necessitate the hiring of additional types of labor, such as carpenters or drywall installers, to complete the project.
Additional Water Heater Replacement Cost Factors
In addition to the cost of the appliance and the work of the installation, there may be other fees associated with replacing a water heater. Included in this are permit fees, the installation of an expansion tank, the removal and disposal of the old water heater, the installation of water or gas lines, electrical or carpentry work, and the price of materials and labor.
Permit
A plumbing permit is usually required when replacing a hot water heater in most areas. The permit is necessary so that an inspection may be carried out to check that the work was completed in accordance with current safety and quality standards and regulations. Depending on the specifics of the project, many permissions may be necessary, with total permit charges ranging between $50 and $500, and perhaps as high as $1,500.
Expansion Tank
When it comes to replacing a hot water heater, the majority of municipalities require a plumbing permit. In order to confirm that the work was carried out in accordance with current safety and quality requirements, a permit is necessary for the job to be completed. Depending on the specifics of the project, many permissions may be necessary, with total permit charges ranging from $50 to $500, and perhaps as high as $1,500, depending on the total number of permits.
Tank Removal
The old tank must be removed in order for the new one to be installed. The cost of removing the old tank will range from $100 to $500, depending on the contractor’s rate, the size of the tank, and the ease with which it can be reached. Expect to pay more if the object is large and difficult to remove.
Relocating the Unit or Fuel Conversion
Moving a water heater to a different place in the house, switching from one fuel type to another, or even upgrading to a larger tank can all increase the cost of installation dramatically. Water line rerouting ($350 to $1,700), framing a wall ($200-$400), installing drywall ($800-$2,500), adding a gas line ($250 to $800), or extending electrical wiring ($500 to $1,500) are all possible requirements for your project. You should consult with your installer if you are considering anything other than a direct replacement.
Materials
In addition to incidental materials such as solder and pipe thread compound, replacing a water heater may necessitate the purchase of other things such as venting pipes, connectors, water or gas piping, pipe fittings, and other related products. Depending on the specifics of the project, these elements might represent anything from a little to a major increase in expenses. Replacing a water heater is not a do-it-yourself activity, and it is slightly more expensive than replacing other equipment.
There are numerous variables that influence the time it takes to complete the installation, including the cost of materials and labor, the availability of permits, the labor of a licensed plumber, the removal of an old unit, the ease of access, and other factors that may prolong the time it takes to complete the job.
Compare Quotes From Top-rated Water Heater Installers
Estimates are provided without obligation.
Frequently Asked Questions (FAQs)
Traditional tank-style water heaters have a lifetime of eight to thirteen years. They are not energy efficient. Tankless water heaters have a lifespan of 20 years or longer.
Can I install a water heater myself?
It is conceivable for an experienced, highly-skilled DIYer to obtain the necessary licenses from the local authorities and install a water heater in their own house, but making mistakes may be both costly and potentially deadly. The expense of cleanup and repairs, if anything goes wrong, can rapidly become more expensive than the cost of hiring a professional in the first place.
Should I buy a water heater from a plumber?
It’s common to be offered a labor warranty when working with an experienced plumber. An additional guarantee offered by the plumber, in addition to any parts or equipment warranty provided by the appliance’s manufacturer, may cover the cost of any repairs necessary as a result of incorrect installation work.
What are the signs your hot water heater is going out?
The majority of people will wait until their water heater has fully failed before they replace it. Avoiding this tension by arranging an inspection or replacement when any of these symptoms appear can help to alleviate it.
- The water heater has reached or is nearing the end of its expected service life
- The hot water is rapidly depleted. The temperature of your shower is uneven
- It appears that water is seeping from the tank. Water that is discolored comes from the faucets. The pressure of the water has reduced
- The water does not get heated
- Instead, it remains cool. Noises emanating from the heater, such as loud cracks or pops, for example
Why do water heaters fail?
Premature failure of a water heater can occur for a variety of causes that can be avoided. Keep an eye out for these concerns and be prepared to take action if they develop.
- Internal corrosion as a result of a worn-out anode rod Check the anode rod once a year and replace it if it appears to be worn
- Because of the high mineral concentration of the water, sediment accumulates inside the tank. Annual tank cleaning is recommended to prevent sediment accumulation. Excessive water pressure can cause damage to the water heater as well as other components of the water system. If the pressure of the water entering the home is more than 80 psi, the pressure release valve should be adjusted or replaced. A water heater that is not properly sized will be overworked, leading components to wear out sooner than they should. Install a new hot water heater that is appropriate for the number of people living in the house
- And
How Much Does Water Heater Installation Cost?
Water heaters are one of the most often used household appliances in households all over the world, especially in developing countries. In the winter, having a running water heater is nothing short of a gift. When planning a water heater installation project, one of the factors to take into consideration is the cost of the installation. It costs $400 to $900 to install a 40-50 gallon water heater with a tank, depending on the size of the unit. The cost of installing a tankless water heater typically ranges between $1,470 and $2,500 in most cases.
Tank vs. Tankless Systems
Even though some plumbing contractors in Alpharetta feel that tankless heaters are more energy efficient than traditional heaters, many people believe that they are not as advantageous as they are promoted. A tankless water heater might cost as much as $2500 to install, depending on the model. A tank water heater is reasonably affordable (up to $900 installed), and it can be installed quickly. Tankless systems are quite tough to keep up to date. Despite the fact that homes that utilize these systems claim savings of $70-$80 per year, it takes such households several years to recuperate the difference in the original investment.
These heaters are generally simple to maintain, and they offer hot water more rapidly than their tankless counterparts, saving you time and money.
Labor
Even though some plumbing contractors in Alpharetta feel that tankless heaters are more energy efficient than traditional heaters, many people believe that they are not as advantageous as they are advertised. An installed tankless water heater might cost you up to $2500, depending on the model you choose. It is quite affordable to install a tank water heater (up to $900). Maintaining a tankless system is a demanding task. Despite the fact that homes that utilize these systems report savings of $70-$80 per year, it takes such households many years to recuperate the difference in the original costs.
You might consider utilizing a tank water heater if you wish to use your heater for more than one duty at once. When compared to tankless water heaters, these heaters are less complicated to maintain and deliver hot water more rapidly.
Type of Water Heater
Natural gas water heaters, propane water heaters, electric water heaters, and solar water heater systems are some of the most common types of water heater systems available on the market. Natural gas systems are well-known for being affordable ($500-$700 per system). For a natural gas water heater replacement in Alpharetta, you should budget between $400 and $550 dollars. Installing a new natural gas water heater system can cost you between $1,500 and $2,300 on average, depending on your location.
Although the average cost of installing an electric water heater is between $350 and $450, the initial cost might reach $500 if the installation is complicated due to structural issues.
Additional Considerations
If you wish to replace an old water heater, you should budget an additional $500 to the entire cost. Purchasing new piping will be necessary if your existing water heater pipe is broken or not compatible with the new system. New piping will cost between $8 and $10 per linear foot. Check with your plumbing contractor in Alpharetta to see whether you are required to obtain permits for a new water heater installation. Fletch Barney is the final stop in your hunt for a plumbing specialist. We have earned a reputation as one of the most dependable plumbing companies in Alpharetta.
Call us at 770-333-3031 if you’d like to speak with a professional about your project.
ProLine® 50-Gallon Electric Water Heater
You should budget an additional $500 to cover the expense of replacing an old water heater. Purchasing new piping (at an average cost of $8-$10 per linear foot) is necessary if your existing water heater pipe is broken or not compatible with the new system. Ask your plumbing contractor in Alpharetta if you need to get any permits for a new water heater before you proceed. Fletch Barney is the conclusion of your hunt for a plumbing specialist. Plumbers in Alpharetta know that we are one of the most dependable companies in the city.
Call us at 770-333-3031 if you want to talk about your project with a professional.
State products are available through independent plumbing contractors.
To find a local installer, enter your city and state, or zip code, in the search box below. Find
Certifications
Product Specifications increase the uniform energy factor to 0.92.
- Product Specifications increase the uniform energy factor by 0.92.
- 59″ in height, 20 1/2″ in diameter, 20 1/2″ in width, 20 1/2″ in depth, and 125 pounds in product weight and shipping weight, respectively.
Commercial-Grade Heating Elements
Dual 4500-watt elements for speedier recovery and more dependable performance are included. Lower element made of stainless steel for longer life.
Self Cleaning Dip Tube
It aids in the reduction of lime and sediment accumulation as well as the maximization of hot water flow. PEX cross-linked polymer is used to create this long-lasting product.
High Uniform Energy Factors
Eco-friendly non-CFC foam insulation, heat traps, and other features combine to provide a greater Uniform Energy Factor, which allows for the greatest possible savings on running expenses while minimizing environmental impact.
Coregard™ Anode Rod
Our anode rods include a stainless steel core that allows them to last far longer than normal anode rods, providing exceptional tank protection for significantly longer periods of time.
,
Change the location or Advanced Settings if necessary. The actual performance of a water heater is influenced by a variety of elements. However, actual performance may differ based on circumstances that are beyond our control or ability to predict, such as the weather. You may examine or modify our assumptions about the most prevalent factors that influence the performance of this product in, by going to the advanced options. Annual Various factors, including the energy efficiency of each water heater, the estimated hot water usage set temperature for your household, the average groundwater temperature for your location, and residential energy prices for your location as reported by the Department of Energy and Energy Information Administration, are used to calculate estimated energy costs.
Commercial-Grade Heating Elements
Dual 4500-watt elements for speedier recovery and more dependable performance are included. Lower element made of stainless steel for longer life.
Self Cleaning Dip Tube
Featuring two 4500-watt elements for faster recovery and more dependable operation Elements with a longer lifespan are made of stainless steel.
High Uniform Energy Factors
Dual 4500-watt elements for faster recovery and more dependable performance. Lower part made of stainless steel to survive longer.
Coregard™ Anode Rod
Our anode rods include a stainless steel core that allows them to last far longer than normal anode rods, providing exceptional tank protection for significantly longer periods of time.
| Nominal Capacity:? Nominal Capacity is a representative number provided by a manufacturer for comparison purposes. The actual rated storage volume of our water heaters may be found on the product details page on our website. | 50 |
| Rated Storage Volume? Rated Storage Volume is the measured storage volume defined by the Department of Energy. | 46 |
| UEF | 0.92 |
| Recovery Gallons: | 21 |
| First Hour Rating: | 62 |
| Upper Element Wattage: | 4500 |
| Lower Element Wattage: | 4500 |
| Max Wattage: | 6000 |
| Voltage: | 240 |
| Minimum Voltage Required: | 208 |
| Limited Tank Warranty: | 6 Years |
| Limited Parts Warranty: | 6 Years |
| Anode: | Coregard™ Sacrificial Anode |
| Self Cleaning: | Yes |
| Water Connection Location: | Top |
| Water Connection Size: | 3/4″ |
| Type: | Tall |
| Height: | 59″ |
| Diameter: | 20 1/2″ |
| Width: | 20 1/2″ |
| Depth: | 20 1/2″ |
| Product Weight: | 125 |
| Shipping Weight: | 125 |
A. O. Smith water heaters are accessible from your local plumbing specialist and have a uniform energy factor of 0.92.
Literature
To find a local installer, enter your city and state or zip code into the search box. Description of the Product It is the dependable choice when you want to increase your hot water production while also reducing standby heat loss. The Select® Standard electric water heater is built with environmentally friendly insulation to prevent standby heat loss. This unit, which has a 50-gallon tank and a 6,000-watt generator, has an hourly rating of 69 gallon and an hourly recovery rate of 21 gallon, according to the manufacturer.
It comes with a limited tank guarantee of six years.
FindHide Search is a search engine that helps you find things.
State products are available through independent plumbing contractors.
To find a local installer, enter your city and state, or zip code, in the search box below. Product Specifications may be found by clicking here.
- Capacity in Nominal:? The Nominal Capacity is a typical number offered by a manufacturer for the purpose of comparison between different products. The actual rated storage volume of our water heaters may be found on the product details page of our website under the product description. 50
- Recovery Gallons: 21
- First Hour Rating: 73
- Total Gallons: 50 4500W for the upper element, 4500W for the lower element, 6000W for the maximum element, and 240V for the voltage. The bare minimum voltage required is 208 volts. Tank warranty is limited to six years, and parts warranty is also limited to six years. Anode:CoregardTM Sacrificial Anode is used as an anode. Yes, self-cleaning is available. Water connection location: on the top
- Water connection size: 34 inch
- TALL, 60″ in height, 22″ in diameter, 20 1/2″ in width, 22″ in depth, 134 pounds in shipping weight
Commercial-Grade Heating Elements
TALL, 60″ in height, 22″ in diameter, 20 1/2″ in width, 22″ in depth, 134 lbs in shipping weight.
Self Cleaning Dip Tube
It aids in the reduction of lime and sediment accumulation as well as the maximization of hot water flow. PEX cross-linked polymer is used to create this long-lasting product.
High Uniform Energy Factors
Eco-friendly non-CFC foam insulation, heat traps, and other features combine to provide a greater Uniform Energy Factor, which allows for the greatest possible savings on running expenses while minimizing environmental impact.
Coregard™ Anode Rod
Our anode rods include a stainless steel core that allows them to last far longer than normal anode rods, providing exceptional tank protection for significantly longer periods of time.
,
With a stainless steel core, our anode rods have a longer life span and provide excellent tank protection for a longer period of time than regular anode rods do.
Commercial-Grade Heating Elements
Dual 4500-watt elements for speedier recovery and more dependable performance are included. Lower element made of stainless steel for longer life.
Self Cleaning Dip Tube
It aids in the reduction of lime and sediment accumulation as well as the maximization of hot water flow. PEX cross-linked polymer is used to create this long-lasting product.
High Uniform Energy Factors
Designed to aid in the reduction of lime and sediment accumulation as well as the maximization of hot water production. A cross-linked polymer that has a long shelf life.
Coregard™ Anode Rod
Our anode rods include a stainless steel core that allows them to last far longer than normal anode rods, providing exceptional tank protection for significantly longer periods of time.
| Nominal Capacity:? Nominal Capacity is a representative number provided by a manufacturer for comparison purposes. The actual rated storage volume of our water heaters may be found on the product details page on our website. | 50 |
| Recovery Gallons: | 21 |
| First Hour Rating: | 73 |
| Upper Element Wattage: | 4500 |
| Lower Element Wattage: | 4500 |
| Max Wattage: | 6000 |
| Voltage: | 240 |
| Minimum Voltage Required: | 208 |
| Limited Tank Warranty: | 6 Years |
| Limited Parts Warranty: | 6 Years |
| Anode: | Coregard™ Sacrificial Anode |
| Self Cleaning: | Yes |
| Water Connection Location: | Top |
| Water Connection Size: | 3/4″ |
| Type: | Tall |
| Height: | 60″ |
| Diameter: | 22″ |
| Width: | 20 1/2″ |
| Depth: | 22″ |
| Shipping Weight: | 134 lbs |
With a stainless steel core, our anode rods have a longer life span and provide excellent tank protection for a longer period of time than regular anode rods do.
Literature
Our anode rods include a stainless steel core, which allows them to last far longer than normal anode rods, providing exceptional tank protection for significantly longer periods of time.
Where to Buy
Products from A.O. Smith are offered through independent plumbing contractors in the United States. To find a local installer, enter your city and state, or zip code, in the search box below.
Certifications
Limited guarantee of eight years 0.64Uniform Energy FactorAdditional Product SpecificationsTechnical Specifications
- Capacity in Nominal:? The nominal capacity of a water heater is the representative figure used in the process of obtaining a safety standard certification for the heater. 50
- What is the rated storage volume? Rated Storage Volume = The measured storage volume prescribed by the Department of Energy is referred to as the “rated storage volume.” 48
- UEF0.64
- Maximum BTUs:50,000
- 48
- Natural gas is used as a fuel
- The tank has an 8-year limited warranty, and the parts have an 8-year limited warranty. Anode:CoregardTM Sacrificial Anode
- T P Relief Valve:Yes
- Anode:CoregardTM Sacrificial Anode The water connection is located at the top of the building. The water connection size is 3/4″
- The NOx emissions are ultra-low. Rating during the first hour: 84
DimensionsVenting
- Type:Tall
- Height:60 3/4″
- Height with Draft Hood:60″
- Diameter:22″
- Width:22″
- Depth:22″
- Type:Tall
- Height with Draft Hood:60″ Standard Vent is the most common type of vent.
Intelligent Control Logic
To increase performance, the onboard microprocessor provides better operating settings and narrower differentials for accurate sensing, as well as quicker heating response to improve responsiveness. It generates the electricity required to run the electronic gas control without the requirement for an external power source by means of a thermopile. The electronic gas control is equipped with an LED status indicator, which keeps track of the system’s performance and servicing diagnostics, among other things.
DynaClean™ Diffuser Dip Tube
Aids in the reduction of lime and sediment accumulation, as well as the maximization of hot water supply. Made from a long-lasting cross-linked polymer called PEX.
High Uniform Energy Factors
Eco-friendly non-CFC foam insulation, heat traps, and a specifically built combustion chamber work together to generate a high Uniform Energy Factor, allowing for the greatest possible savings on running expenses while minimizing environmental impact.
Green Choice® Gas Burner
Nox emissions can be reduced by up to 33% thanks to a patented eco-friendly burner design that meets Low-NOx emission limits of less than 40 ng/J. How It Works (instructions) Gas water heaters heat water by utilizing either natural gas or liquid propane as fuel (propane). Gas water heaters require an air supply and must be properly vented in order to function effectively. Cold water is introduced into the water heater by an internal “dip tube,” which drives the cold water to the bottom of the tank and forces the hot water out through the output connector.
- A pilot light is used by the vast majority of gas water heaters.
- When cold water is introduced into the tank, the temperature sensor on the gas control sends a signal to the main gas valve, which opens the main gas valve.
- Room where the water heater is situated provides the air that is necessary to operate the burner.
- When the required temperature has been attained, the main gas valve is cut off to prevent further damage.
- It is meant to open if the internal temperature or pressure of the tank exceeds specific restrictions.
- It is important that water heaters have the capacity to deliver enough hot water even when temperatures are cold and household demand is high.
- Consumers who purchase appliances that meet particular energy efficiency criteria are eligible for rebates and incentive programs, which offer cash back to them.
The Cash for Appliances program is intended to encourage consumers to purchase energy-efficient appliances. Consumers who purchase appliances that are ENERGY STAR ®certified or CEE approved may be eligible for cash incentives. The majority of states are giving refunds ranging from $50 to $250.
Is this enough hot water?
Info The number of minutes you can take a shower before the hot water runs out. The flow rate is assumed to be 2.2 GPM. Is it necessary to examine or alter our assumptions? Obtain access to the advanced options. closeinfominutessingle shower lengthinformation about closing There is a limit to the number of consecutive showers you can take before running out of hot water. This calculation assumes a 2.2 GPM flow rate and an 8-minute shower duration. Is it necessary to examine or alter our assumptions?
- Closeinfoshowersback-to-backinfo Approximately the number of showers you may take at the same time before running out of hot water This calculation assumes a 2.2 GPM flow rate and an 8-minute shower duration.
- Obtain access to the advanced options.
- This calculation assumes a flow rate of 5.0 GPM and a fill level of 67 percent.
- Obtain access to the advanced options.
- This calculation assumes a flow rate of 5.0 GPM and a fill level of 67 percent.
- Obtain access to the advanced options.
- Is it necessary to examine or alter our assumptions?
- Close info Estimated energy costs in dollars The actual performance of a water heater is influenced by a variety of elements.
- Please see the advanced options if you want to see or change our assumptions about the most prevalent elements that influence the performance of this product based on the US National Average.
- A.
- Smith water heaters can be purchased from a plumbing specialist in your area.
Product FeaturesOptions
Info The number of minutes you can take a shower before the hot water runs out. 2.2 GPM flow rate is assumed in this calculation. Are our assumptions in need of reexamination or revision? Advanced options can be accessed. infominuteslength of a single shower lengthinfo The number of showers you can take back-to-back without running out of hot water in a 24-hour period Based on a flow rate of 2.2 GPM and a shower duration of eight minutes, Are our assumptions in need of reexamination or revision?
- Closeinfoshowersback-to-backinfo Approximately the number of showers you can take at the same time before running out of hot water.
- Advanced options can be accessed.
- Advanced options can be accessed.
- Based on a flow rate of 5 GPM and a fill level of 67 percent, the following equation can be used: Are our assumptions in need of reexamination or revision?
- Infominutestime to refill the bathtubInfo Estimated yearly operating costs for this water heater are as follows: Are our assumptions in need of reexamination or revision?
- Close info Energy costs are projected at $.
- Our best estimate of your probable experience with this water heater based on the US National Average is shown above, but your actual experience may differ depending on circumstances that are beyond our control or estimation.
- Annual energy expenditures are calculated based on the energy efficiency of each water heater, the expected water use temperature for your household, the typical groundwater temperature for your locality, and residential energy prices as provided by the Department of Energy.
AO Smith water heaters can be purchased from a plumbing specialist in your area.
DynaClean™ Diffuser Dip Tube
Aids in the reduction of lime and sediment accumulation, as well as the maximization of hot water supply. Made from a long-lasting cross-linked polymer called PEX.
High Uniform Energy Factors
Eco-friendly non-CFC foam insulation, heat traps, and a specifically built combustion chamber work together to generate a high Uniform Energy Factor, allowing for the greatest possible savings on running expenses while minimizing environmental impact.
Green Choice® Gas Burner
Nox emissions can be reduced by up to 33% thanks to a patented eco-friendly burner design that meets Low-NOx emission limits of less than 40 ng/J.
How it Works
Gas water heaters heat water by utilizing either natural gas or liquid propane as fuel (propane). Gas water heaters require an air supply and must be properly vented in order to function effectively. Cold water is introduced into the water heater by an internal “dip tube,” which drives the cold water to the bottom of the tank and forces the hot water out through the output connector. This configuration gives the most amount of hot water for a given tank capacity. A pilot light is used by the vast majority of gas water heaters.
- When cold water is introduced into the tank, the temperature sensor on the gas control sends a signal to the main gas valve, which opens the main gas valve.
- Room where the water heater is situated provides the air that is necessary to operate the burner.
- When the required temperature has been attained, the main gas valve is cut off to prevent further damage.
- It is meant to open if the internal temperature or pressure of the tank exceeds specific restrictions.
- It is important that water heaters have the capacity to deliver enough hot water even when temperatures are cold and household demand is high.
Certifications
The uniform energy factor is 0.64.
Product Specifications
| Tech Specs | |
|---|---|
| Nominal Capacity:? Nominal capacity is the representative number pursuant to the safety standard certification process for water heaters | 50 |
| Rated Storage Volume? Rated Storage Volume = Rated storage volume is the measured storage volume defined by the Department of Energy. | 48 |
| UEF | 0.64 |
| Maximum BTUs: | 50,000 |
| Power Source: | Natural Gas |
| Limited Tank Warranty: | 8 Years |
| Limited Parts Warranty: | 8 Years |
| Anode: | Coregard™ Sacrificial Anode |
| T P Relief Valve: | Yes |
| Water Connection Location: | Top |
| Water Connection Size: | 3/4″ |
| Emissions: | Ultra-Low NOx |
| First Hour Rating: | 84 |
| DimensionsVenting | |
|---|---|
| Type: | Tall |
| Height: | 60 3/4″ |
| Height w/Draft Hood: | 60″ |
| Diameter: | 22″ |
| Width: | 22″ |
| Depth: | 22″ |
| Vent Type: | Standard Vent |
Incentives
Consumers who purchase appliances that meet particular energy efficiency criteria are eligible for rebates and incentive programs, which offer cash back to them. Frequently, these criteria are linked to the ENERGY STAR ®certification program, which is a voluntary initiative. The Cash for Appliances program is intended to encourage consumers to purchase energy-efficient appliances. The purchase of Energy Star® certified or CEE approved appliances might result in cash rewards for the purchasers.
Photos
Please click here to view and download the high-resolution photographs.
Need More Hot Water?
The fact that you are out of hot water is not a reason to be concerned.
When deciding if the HUR-50 will supply enough hot water for your need, consider the following: