How Long Water Heater To Heat Up

Water Heater Recovery Heat Up Times Comparison Chart

Recovery of Waste Water from Water Heaters Heat Up Times Compared to One Another Time Required for Water Heater to Come to Temperature There isn’t much that can ruin your day quite as quickly as taking an ice cold shower, and if you have the wrong hot water heater, this might become your new normal very soon. In the event that your current heating unit fails on you, don’t let your stress over the situation lead you to make the wrong choice for a replacement. Prior to selecting a hot water heater, take into consideration how long it will take for the water heater of your choice to heat up completely.

The question is, how long does it take a hot water heater to reheat water once it has been depleted?

Water Heater Type Time to Heat Back Up
Gas – Conventional Tank 30-45 mins
Gas Tankless 0 mins
Electric – Conventional Tank 60-80 mins
Electric Tankless 0 mins

Water Heaters Powered by Natural Gas Specifications for a Gas Conventional Water Heater Once the water is in the tank, the normal gas tank water heater will take 30 to 40 minutes to heat it up to the desired temperature. When new water from your water supply is fed into the tank, this early heat up occurs as a result of the incoming water. Some mathematical calculations are required to provide a more specific explanation of why this takes 30 minutes. The size of the heater’s tank is obviously important, since more water will take longer to heat than a smaller tank.

  1. In simple terms, a BTU is the amount of heat required to elevate one pound of water by one degree Fahrenheit in temperature.
  2. For example, the typical hot water heating unit tank holds 40 gallons of water.
  3. Thirty-five gallons times 8.3 pounds per gallon is 330 pounds of water.
  4. For the sake of not having to get into full-blown thermodynamics calculations, we may simplify and say that a 40,000 BTU system with a 40-gallon tank needs half a minute to heat each gallon, which results in a half-hour heat up time.
  5. For those with larger tanks or lower BTU ratings, on the other hand, it will take longer to heat their tanks.
  6. Likewise, keep in mind that this is the amount of time it takes for new cold water to be heated in your tank, so plan accordingly.

When all of the warm water in the tank has been consumed, the length of time it takes to warm up additional water is taken into consideration. It will be necessary to restart the gas tank water heater at that point in order to heat new water from the entering groundwater temperature level.

A gas tank hot water heater will take roughly 40 minutes to warm up new inbound water for the very first time.

Water Heaters Powered by Gas Exact Specifications for a Gas Conventional Water Heater Once the water is in the tank, the normal gas tank water heater will take 30 to 40 minutes to heat it up. When new water from your water supply is put into the tank, this preliminary heat up occurs, as described above. Mathematical calculations are required for a more specific explanation of why this takes 30 minutes. Naturally, the size of the heater’s tank is an important consideration, since more water will require more time to heat.

  1. In its most basic form, a BTU is the amount of heat required to elevate one pound of water by one degree Fahrenheit in temperature.
  2. In the case of hot water heating units, the typical tank capacity is 40 gallons.
  3. Thirty-four gallons times 8.3 pounds per gallon is 330 pounds of water.
  4. For the sake of not having to get into full-blown thermodynamics calculations, we may simplify and say that a 40,000 BTU system with a 40-gallon tank takes half a minute to heat each gallon, which results in a half-hour heat up time.
  5. For those with larger tanks or lower BTU ratings, on the other hand, it will take longer to heat up their tanks.
  6. It’s also important to remember that this is the amount of time it takes for new cold water to be warmed in your storage tank.
  7. When all of the warm water in the tank has been consumed, the length of time it takes to heat up additional water is taken into consideration.
  • Temperature of the incoming water-For both tankless and tank-style hot water heaters, the temperature of the incoming water will determine how long it takes for the water to heat up to the desired temperature. Due to the fact that tank heating systems conserve water while still maintaining a constant temperature, the incoming temperature should not have a significant impact. Tankless heating systems, on the other hand, supply incoming water as needed only a few seconds before it is released from the faucet. This suggests that if the groundwater temperature level is really low, the water may not heat up as quickly as it otherwise would. When the ambient temperature in the room or area where the heaters are housed is excessively cold, both types of heaters might be adversely affected. Water heater settings-Although water heaters appear to be relatively simple when compared to other household mechanicals, they often require more effort to operate properly. Whether your heating unit isn’t operating properly, a professional may be required to inspect it and determine if any settings or calibrations have been altered that are negatively impacting its performance. Issues with age and maintenance are similar. If your heating system is like any other mechanical equipment, the age and quality of your system might have an influence on its efficiency, including the amount of time it takes to warm up. In addition, a lack of simple maintenance, such as interrupting work to wipe out silt that may have accumulated in the pipes, might result in decreased efficiency. Those who live in areas with hard water are more likely to encounter pipeline sediment. While it’s easy for the end user to forget, hot water travels from the ground to your home’s plumbing system, where it passes through the heating unit and pipes before reaching the faucet. When your bathroom is located a considerable distance away from the heating system, it is possible that the warm water may take longer to reach there. This should be represented by a knowledgeable technician while setting your system, so it should not be a source of undue anxiety. Along with the length of piping, the width of your pipes may also have an impact on how long it takes your water heater to heat up properly. In that it can carry more water, a larger pipe is advantageous, but it will take more water to be heated before the pressure rises up sufficiently to allow it to push through the remainder of the pipeline system.

In conclusion, there is a heater that is suitable for any situation. Consider your requirements before selecting a storage tank, whether traditional or tankless in design. Please remember that South End Plumbing provides all plumbing services and that we are only a mouse click away.

We also specialize in tankless water heaters; please contact us for more information. South End Plumbing is one of the few organizations that will provide you with a no-obligation quote. To book a visit, please call us at 704-919-1722 or complete the online form.

How Long Does a Water Heater take to Recover?

Take a wonderful, warm shower when the water suddenly becomes ice cold, which is a really unpleasant sensation to experience. When will your hot water be able to be accessed again? Alternatively, perhaps this is a recurring trend, and you are perplexed as to what is causing it. It all relies on the recovery rate of your water heater, which is the amount of time it takes to reheat the water tank once it has been depleted. On average, it might take anywhere from 1-2 hours for an 80-gallon tank water heater to recover from a power failure.

Several factors will be discussed in this article to assist you in making a more specific estimate of how long your water heater will need to recover.

  • Recovery timings for a typical water heater
  • Key elements that impact recovery times for a typical water heater
  • Common difficulties that cause recovery times to be delayed

Is your water heater taking an excessive amount of time to recover? Red Cap PlumbingAir can provide you with a water heater repair that is both rapid and efficient. We promise that our skilled plumbers will arrive on time, and in most situations, we will be able to repair your water heater the same day that we identify the problem!

Average Water Heater Recovery Times

Consider the typical recovery time for a water heater and what is considered a “fast” recovery time for a water heater. You will be able to tell immediately if yours is taking substantially longer than normal. An 80-gallon tank with entering water temperature of 62 degrees, for example, will typically recover in the following amount of time:

  • 60-70 minutes (for a gas tank water heater)
  • 120 minutes (for an electric tank water heater)
  • 60-70 minutes (for an electric tank water heater).

If you have a gas tank water heater, it will take 60-70 minutes. If you have an electric tank water heater, it will take 120 minutes.

Key Factors That Influence Water Heater Recovery Times

The recovery time of your water heater will be greatly influenced by several aspects, including the tank size, first hour rating, fuel type, and temperature increase. Let’s take a closer look at each of these elements in greater depth below.

1. Tank size

Water heater recovery time is greatly influenced by several parameters, including the tank size, first-hour rating, fuel type, and temperature increase. Below, we’ll take a closer look at each of these elements.

2. First hour rating

The “first hour rating” of any tank water heater is based on the fact that the tank is continually renewing its water supply. This rating informs you how many gallons of water the unit can supply in one hour when it starts with a full tank of hot water. The first hour ratings are based on a variety of criteria, including your heating source, burner size, and others. In general, though, the higher your first-hour rating, the faster you may anticipate your water heater to recover from the damage it has sustained.

Examine the label on your water heater that says “Energy Guide.”

3. Fuel type

When compared to gas water heaters, electric water heaters take nearly twice as long to restore their heating capacity. Why? Because gas water heaters use gas burners, which can achieve greater temperatures more quickly than electric heating coils, they are more energy efficient. Despite the fact that it is more expensive to install, a gas water heater is extremely energy-efficient, and you will not be without hot water for lengthy periods of time. If you want hot water quickly, it may be worthwhile to make the expenditure.

If you already have gas lines in place, you will save money on installation charges. Additionally, gas water heaters are less expensive to maintain since natural gas is more economical as a fuel than electricity, especially in Florida, which is one of the top natural gas producers in the country.

4. Temperature rise

The temperature rise is influenced by the hot water temperature you like. The temperature of the water in your location will vary depending on where you live and what kind of climate you have. As a result, while estimating the recovery of your water heater, it is critical to account for “temperature rise.” The difference between the temperature of the entering water and the temperature you want your water to be is referred to as the temperature increase. The greater the disparity between the two, the longer it will take for the water heater to recover.

If you are a homeowner in the Tampa region, you should know the following:

  • It is estimated that your incoming water temperature will be around 72 degrees
  • Your targeted hot water temperature is 120 degrees
  • And

If the intended temperature is 120 degrees and the arriving temperature is 72 degrees, the temperature rises by 48 degrees. According to the math, your temperature would have increased by 48 degrees Fahrenheit. Let us suppose you live in the state of New Hampshire:

  • Temperature increase of 48 degrees (from target temperature to arriving temperature) = 120 degrees minus 72 degrees You would have experienced a 48-degree increase in temperature, according to the equation. Suppose you live in New Hampshire and want to learn more about the state.

According to our calculations, the temperature would climb by 73 degrees Fahrenheit. When compared to the Tampa example, this is nearly a twofold increase in temperature, which means the New Hampshire homeowner’s water heater will have to work twice as hard to heat their water as before.

Common Problems That Slow Down Recovery Time

When sediment accumulates at the bottom of your water heater, contact a plumber to have it flushed thoroughly. / Image courtesy of St. Cloud State University Even if you have the most energy-efficient water heater available, you may still experience difficulties that cause the heater to take longer to recover from. The following are examples of common issues:

Sediment buildup:

It is necessary to get your water heater flushed when sediment accumulates at the bottom. St. Cloud State University If you have the most energy-efficient water heater available, you may still experience difficulties that cause the heater to take longer to warm up after being shut off. These are some of the most common issues:

Broken dip tube:

A plumber should be called if sludge accumulates at the bottom of your water heater. / Image courtesy of St. Cloud Gov. Even if you have the most energy-efficient water heater available, you may still experience difficulties that cause it to take longer to recover. The following are examples of common problems:

Worn heating elements:

Depending on the cause of the failure (normal wear and tear or damage), your tank water heater may have difficulty regaining its previous performance.

Incorrect sizing:

If your water heater has consistently taken an excessive amount of time to reheat, your water heater is most likely too small for your requirements. The tank will never catch up and fully recover if the water heater is too small for your household’s or heating demands. This is because you are drawing too much water from the tank and it will fast empty.

Contact a professional plumber to examine and flush your unit if you are experiencing any of the difficulties listed above with your hot water heater. It may be necessary to fix or replace it, depending on its state of repair.

Water Heater Taking Too Long To Recover? Call Red Cap PlumbingAir.

This indicates that your water heater is likely to be too small for your requirements if it has always taken too long to warm. It is possible to deplete a water heater that is too small for your home or heating requirements, which means the tank will never catch up and fully recover since you are pulling too much water from the tank. Any of the following problems with your water heater should be addressed by calling a professional plumber to check and flush the device. It may be necessary to repair or replace it, depending on its state.

How Long Will It Take a Water Heater to Heat Up?

If your water heater has consistently taken an excessive amount of time to warm, your water heater is most likely too small for your needs. The tank will never catch up and fully recover if the water heater is too small for your household’s or heating demands. This is because you are drawing too much water from the tank. If you are experiencing any of the problems listed above with your water heater, call a professional plumber to examine and flush your unit. They may need to repair or replace it, depending on its condition.

  • Temperature increase
  • Energy source for the water heater
  • Water heater size
  • First hour rating
See also:  What Is A Low Nox Water Heater

Before purchasing a new water heater, take the time to conduct thorough research. If having hot water as quickly as possible is essential to you, continue reading to understand how the type of water heater you choose can effect how quickly you will have hot water.

How Long Does It Take for Hot Water to Come Back with Certain Types of Water Heaters?

Time required to heat water varies; it may take as little as a few seconds or as long as 60–80 minutes. Whatever sort of water heater you have will determine how much heat you will receive. Here are some typical heat-up times for different types of water heaters, assuming that the equipment are new and appropriately sized for the home: 1.

  • Heater time for an electric storage tank water heater is 60–80 minutes
  • Propane heater time is 30–40 minutes
  • And propane tankless water heater time is zero minutes.

Keep in mind that these are the lengths of time it takes to heat new cold water that is introduced into the water heater’s storage tank. Storage tank water heaters are self-contained appliances that regularly replenish themselves and heat water for when they are needed. However, if you use up all of the hot water (for example, after a busy morning with many showers), you’ll be kept waiting for additional hot water as your appliance refills from the tank’s empty position. Without a propane tankless water heater, which warms water on demand, it’s possible that you’ll be without hot water during high usage periods.

Conventional Gas Tank Water Heater

When starting with an empty tank, a standard gas tank water heater, such as one fueled by propane, can take up to 30–40 minutes to heat the water to the desired temperature.

Gas Tankless Water Heater

When it comes to households with moderate to high hot water consumption, propane tankless water heaters are a popular choice. When properly sized and placed, they have the ability to quickly heat water on demand, delivering hot water in a matter of seconds when needed.

Conventional Electric Storage Tank Water Heater

One of these appliances might take up to 60–80 minutes to heat water, depending on the model.

The use of electricity to heat water is not as efficient as the use of propane, thus it is only a viable choice for small households with low water heating requirements.

Electric Tankless Water Heater

These systems, like propane tankless water heaters, heat water on demand, allowing for quicker supply of hot water than storage tank units. However, they will still take a little longer to heat up than propane does.

Solar Water Heater

The installation of solar panels, which gather energy and may later be used to power a water heater, is a popular choice among homeowners. However, unless you live in a place that receives enough of sunshine throughout the year, you’ll most likely need to supplement the solar system with another water heater that runs on gas or electricity in order to have enough hot water.

Other Factors That Can Affect Water Heater Recovery Time

Homeowners who want to collect energy to use to run a water heater may opt to put solar panels on their roofs. However, unless you live in a place that receives enough of sunshine throughout the year, you’ll most likely need to supplement the solar system with another water heater that runs on gas or electricity in order to achieve adequate hot water.

  • Water heater size: If you regularly find yourself without enough hot water in your home, it is possible that your water heater is too small for your requirements. Be sure to learn about how to size a water heater while you’re researching which water heater is best for your needs. Rating for the first hour: This is the maximum number of gallons of hot water that a unit can deliver each hour, starting with a completely full tank of water. Check the water heater’s manufacturer’s information to ensure that the first-hour rating of the water heater will suit your demands during peak consumption periods. Dimensions of the house: If your water heater is located a great distance away from the appliances or fixtures that require hot water, it may take longer for the hot water to reach those appliances or fixtures as it travels through the pipes. Pipe diameter (inches): Smaller pipes are incapable of transporting as much hot water as larger pipes. The water heater’s age and condition are as follows: Over time, the efficiency of water heaters decreases. Considering that one year for you is equivalent to ten for your water heater, it’s possible that yours is older and less efficient than you believe, and that it’s delivering less hot water than it should be. How long has your water heater been in service?

If Your Water Heater Heats Water Too Slowly

Do you live in a house where you have to wait an inordinate amount of time to receive hot water when you need it? It might be caused by any of the difficulties listed above, or it could be the result of a condition that requires expert treatment. Consult with a knowledgeable specialist, such as a plumber or a propane provider, about your circumstances to ensure that you have enough hot water to keep yourself comfortable.

Keep Reading More

It’s critical to understand how to properly size a water heater before making a purchase to ensure that you never run out of hot water. Are you interested in having hot water available on demand? Learn more about the advantages of tankless water heaters by reading the following article.

How Long Does It Take for a Water Heater to Heat Up?

You have arrived to the following page: How Long Does It Take for a Water Heater to Heat Up? Do you have a question about how long it takes for a water heater to heat up? No need to look any farther – our comprehensive guide provides answers to this and many other questions. Continue reading to find out all you need to know.

Jump to:
  • Greetings, and welcome to the site: Where do I begin? Home/Homeowners/Systems/How Long Does It Take for a Water Heater to Heat Up? ‘How long does it take for a water heater to heat up?’ you might be thinking. Do not waste any more time looking for an answer to this and other questions. Continue reading to find out all you require.

You’ve arrived to the following page: How Long Does it Take for a Water Heater to Heat Up? “How long does it take for a water heater to heat up?” you might be thinking. No need to look any farther – our comprehensive guide will answer this and many other questions. Continue reading to learn all you need to know.

How Long Does It Take for a Water Heater to Heat Up?

A storage water heater (one with a tank) requires some time to heat up the water in the tank before it is ready to use. When it comes to water heaters, though, how long does it take for them to heat up? You should be aware of this whether you have recently installed a new water heater or simply want to determine whether your current water heater is operating as it should. After filling the tank, you should be able to anticipate hot water within 30 minutes (gas) to around an hour and 20 minutes (electric) after doing so.

However, there are a few things at play in this situation. The size of your water heater, the power source, the First-Hour Delivery rate, and the recovery rate are all factors that influence how long you’ll have to wait for hot water. Read on for the next section:Gas versus Electric Water Heaters

How Long Does It Take a Gas Water Heater to Heat Up?

A storage water heater (one with a tank) requires some time to heat up the water in the tank before it can be used. When it comes to water heaters, though, how long does it take for them to warm up? It’s important to understand this whether you’ve recently had a new water heater installed or if you’re just curious about how well your current water heater is working. After filling the tank, you should be able to expect hot water within 30 minutes (gas) to around an hour and 20 minutes (electric).

There are several factors that influence how long you will have to wait for hot water, including the size of your water heater, the power source, the First-Hour Delivery rate, and the recovery rate.

Continue reading.

  • A storage water heater (one with a tank) requires some time to heat up the water in the tank before you can use it. But, how long does it take for a water heater to come to a boiling temperature? You should be aware of this whether you have recently had a new water heater installed or simply want to determine whether your current water heater is operating as it should. After filling the tank, you should be able to anticipate hot water within 30 minutes (gas) to around an hour and 20 minutes (electric) of doing so. However, there are a number of elements at play here. The size of the water heater, the power source, the First-Hour Delivery rate, and the recovery rate are all factors that influence how long you’ll have to wait for hot water. Continue reading:Gas vs. Electric Water Heaters

The average gas water heater holds around 40 gallons of water and takes approximately 30 to 40 minutes to heat water from 40 degrees to 120 degrees. It will take around 40 to 50 minutes to heat up a 50-gallon unit. It takes around 60 to 70 minutes for a big 80-gallon gas water heater to reach operating temperature. Of course, this is only a rough estimate, and actual costs may vary depending on the age and model of the vehicle.

How Long Does It Take an Electric Water Heater to Heat Up?

When heating 40-degree water to 120 degrees, the average gas water heater holds around 40 gallons and takes approximately 30-40 minutes to do it. It will take around 40 to 50 minutes for a 50-gallon unit to reach its operating temperature. It takes around 60 to 70 minutes to heat an 80-gallon gas water heater. It should be noted that this is only a rough estimate that will vary depending on the age and model of the vehicle.

  • 40-gallon electric water heaters take 60-80 minutes to heat water
  • 50-gallon electric water heaters take 145-150 minutes to heat water
  • 80-gallon electric water heaters take 120-130 minutes to heat water.

If you have a 40-gallon electric water heater that uses 5500 watts and is set to 120 degrees, it will take around an hour to an hour and 20 minutes to heat the water. It will take around an hour and 45 minutes to an hour and 50 minutes to heat a 50-gallon electric unit. It will take around 2 hours for a big, 80-gallon electric water heater to reach the desired temperature.

6 Factors That Affect Water Heating Time

We’ll look at the elements that influence how long it takes to heat water heaters now that you’ve seen that they may take anything from half an hour to more than 2 hours to heat up.

First-Hour Delivery Rate

A rating for first-hour delivery (FHD) is given to all water heaters. When the water heater is fully charged, the FHD tells how many gallons of hot water it can deliver in an hour. The flow rates for FHD are provided in gallons per hour (GPH). A high FHD rate indicates that you will receive more hot water more quickly than you would from a unit with a lower FHD rate, which means you will save time and money. A FHD rate of around 60 to 80 GPH is appropriate for a 50-gallon container.

Recovery Rate

A rating for first-hour delivery (FHD) is given to all water heater models. When the heater is fully charged, the FHD tells how many gallons of hot water it can produce in an hour.

A rate in gallons per hour is specified for FHD (GPH). You’ll get more hot water sooner if your unit has a higher FHD rate than if your unit has a lower FHD rate. It is recommended that an FHD rate of 60 to 80 GPH be used for a 50-gallon container.

Power Source

The power source of a water heater (gas or electricity) has a significant impact on the amount of time it takes to heat water. Electric water heaters are notorious for taking a long time to heat the water. This is due to the fact that using electrical heating components rather than gas burners is less efficient. A typical 50-gallon gas water heater may have a flow rate of 80 to 90 GPH, but an average 50-gallon electric water heater may have a flow rate of 58 to 66 GPH, depending on the model.

Water Heater Type

Those with tanks that store and heat water are referred to as storage water heaters. Tankless water heaters do not have storage tanks and heat the water as soon as it is drawn from the faucet, saving energy. These two types of water heaters have a significant variation in the amount of time required to heat water. It might take anything from 30 minutes to an hour and a half for a storage water heater to reach operating temperature. A tankless water heater, on the other hand, makes hot water accessible almost immediately.

Continue reading: The Best Tankless Water Heaters

Water Heater Size

Those with tanks that keep and heat water are referred to as storage water heaters. There are no storage tanks with tankless water heaters, so the water is heated just before it is drawn from the faucet. These two types of water heaters heat water in very different amounts of time. It might take anywhere from 30 minutes to an hour and a half for a storage water heater to heat up completely and reach its operating temperature. An instantaneous hot water supply is often provided by a tankless water heater.

Best Tankless Water Heaters (Continue Reading)

Original Water Temperature

The temperature of the starting water has a significant impact on the amount of time it takes for a unit to heat it up. If the water temperature at the input is low, the water heater will have to work harder to increase the water temperature to the setting you’ve selected. Temperatures in cooler areas are typically about 40 degrees Fahrenheit for the water entering the system. In warmer areas, the temperature is around 50 degrees. It takes some time for the water heater to heat the water from 40-50 degrees to 140 degrees.

To assist you in locating local plumbers in your region, we have teamed with Networx. To receive a no-obligation estimate, please complete the form below. Find a Plumber in your area. We may receive a commission if you click on this link, but there is no additional cost to you.

So, How Long Does It Take for a Water Heater to Heat Up?

In most cases, if you have a gas water heater set to 120 degrees and the incoming water is about 50 degrees, you should not have to wait more than 30 to 50 minutes for hot water (in 40 and 50-gallon units). A 5500-watt electric water heater set to 120 degrees will provide hot water after about 50 minutes if the incoming water temperature is roughly 50 degrees. This will require a little longer wait time. It will take around one hour to one hour and forty-five minutes (in 40 and 50-gallon units).

If your water heater takes longer than around 2 hours to heat up, you should contact a professional to inspect it.

See also:  Why My Water Heater Keeps Turning Off
You Might Also like:
  • In most cases, if you have a gas water heater set to 120 degrees and the incoming water is about 50 degrees, you should not have to wait more than 30-50 minutes for hot water (in 40 and 50-gallon units). A 5500-watt electric water heater set to 120 degrees will provide hot water after around 50 minutes of waiting if the incoming water temperature is approximately 50 degrees. A total of one hour and forty-five minutes will be needed (in 40 and 50-gallon units). No matter what sort of water heater you have, you should be able to have hot water in less than 2 hours in most situations. A professional should be contacted if your water heater takes longer than about 2 hours to heat up.

How Long Should a 50-Gallon Water Heater Take to Heat Up?

If you have a gas water heater set to 120 degrees and the incoming water is roughly 50 degrees, you shouldn’t have to wait more than 30-50 minutes for hot water (in 40 and 50-gallon units). A 5500-watt electric water heater set to 120 degrees will provide hot water after about 50 minutes of waiting if the incoming water temperature is roughly 50 degrees. It will take around one hour to one hour and forty-five minutes to complete (in 40 and 50-gallon units). In general, no matter what sort of water heater you have, you should have hot water in less than 2 hours.

Draw Efficiency

If you have a gas water heater set to 120 degrees and the incoming water is roughly 50 degrees, you should not have to wait more than 30-50 minutes for hot water (in 40 and 50-gallon units). If you have a 5500-watt electric water heater set to 120 degrees and the incoming water temperature is around 50 degrees, you will get hot water after a little longer wait. It will take around an hour to an hour and 45 minutes (in 40 and 50-gallon units). Generally speaking, you should have hot water in less than 2 hours, regardless of the sort of water heater you have.

First-Hour Rating

In most cases, if you have a gas water heater set to 120 degrees and the incoming water is about 50 degrees, you should not have to wait more than 30 to 50 minutes for hot water (in 40 and 50-gallon units). A 5500-watt electric water heater set to 120 degrees will provide hot water after about 50 minutes if the incoming water temperature is roughly 50 degrees. This will require a little longer wait time. It will take around one hour to one hour and forty-five minutes (in 40 and 50-gallon units).

If your water heater takes longer than around 2 hours to heat up, you should contact a professional to inspect it.

Recovery Rating

The quantity of electricity that the device receives is what determines its recovery rating. Gas hot water heaters are more energy efficient than electric hot water heaters, taking approximately half the time to heat up.

A 50-gallon hot water heater’s heating time is determined by the temperature of the water entering the machine and the temperature setting used to heat the water, both of which are controlled by the power supply.

Electric Hot Water Heater Recovery

It takes approximately 1 hour and 20 minutes for a 50-gallon hot water heater with 5,500-watt elements set to 120 degrees to heat water that comes into the unit at a temperature of 60 degrees. In contrast, when the water entering this same tank is 40 degrees, it takes 1 hour and 47 minutes to heat it to the desired temperature. It takes 1 hour, 6 minutes for water that is 70 degrees when it enters the tank to reach its maximum temperature of 120 degrees.

Gas Hot Water Heater Recovery

When calculating the recovery time for an electric hot-water heater, reduce the results by two to get the recovery time for a gas unit. Water entering a 50-gallon tank at 40 degrees Fahrenheit heats up in about 53 1/2 minutes to 120 degrees Fahrenheit. In the case of 60-degree water entering the tank, the time it takes for the water to reach the 120-degree temperature is around 40 minutes. It would take 33 minutes for water that was 70 degrees.

How Long Does it Take for a Water Heater to Heat Up?

Please keep in mind that this content may contain affiliate links. This means that, at no additional cost to you, we may gain a small profit on purchases made via our links. Briefly stated, less water warms more rapidly than more water; hence, the volume of water you are heating, as well as the temperature at which it is heated, influences how soon you will get it.

Does Your Hot Water Flow Seem Too Slow?

Hot water heater flow rates may be determined with the use of a simple formula that only requires two variables to be entered into the computer. One possible version of the formula is as follows: Available hot water is determined by the size of the hot water tank and the rate of heat input. Hot WaterIn layman’s terms, the volume of water you are heating, together with the amount of heat you apply to it, affects how soon you will have warm water. Consider a tiny point-of-use water heater or a water heater for a recreational vehicle.

  1. To determine whether or not your water heater’s recovery rate is slow, do certain basic measures that are often utilized by many plumbers in the industry.
  2. to 9 a.m.
  3. The peak use reflects the greatest amount of water that the water heater can handle.
  4. If it is capable of managing peak hours, it is capable of fulfilling the remainder of your requirements.
  5. Add extra 20 gallons to accommodate two more baths for a household of four people.
  6. The entire amount of water is 90 gallons.
  7. Any unit’s maximum draw capacity is around 70% of its total capacity.
  8. That implies that with a 50-gallon water heater, there is always 35 gallons of hot water accessible at all moment.
  9. In accordance with this prediction, bathing while also washing dishes and clothing at the same time will result in running out of hot water very rapidly.

Either don’t do it, get a higher capacity hot water heater, or replace your tank-style hot water heater with a tankless water heater is the Einsteinian answer to this enormous planet-destroying problem. Who would have thought it!?

Recovery Efficiency

Another element to consider while scaling is the amount of time it takes to recover. While gas heaters heat water more quickly, their recovery efficiency is lower than that of electric heaters. For gas water heaters, the efficiency is 75%, whereas for electric water heaters, the efficiency is 100%. Gas hot water heaters, on the other hand, even at lower recovery efficiency, generate more hot water and do it much more quickly than their electrically powered equivalents. Gas heaters with a 30,000 BTU burner create 27.3 gallons per hour at 75 percent recovery efficiency, but electric heaters with a 750-watt heating element produce 3.1 gallons per hour at 75 percent recovery efficiency.

The output of an electrical hot water heater rises with the addition of more heating elements and the use of greater wattages.

One hour’s worth of heating with an electrical heating element results in 20.5 gallons of 100 percent increase when using a 4,500 watt electrical heating element.

The 20,000 BTU burner has a 33 percent lower BTU output than the 30,000 BTU burner (BTU example).

What is a Good Water Heater Recovery Rate?

If the water heater has a capacity of 40 to 50 gallons per hour, anything above 40 gallons per hour would be considered an excellent recovery rate. The higher the BTU rating of the burner, the better it is for recovery in general. An average 50-gallon electric water heater with twin heating elements has a recovery rate of 20 gallons per hour, which is satisfactory for most applications. Single element water heaters will, of course, have a lesser recovery rate than their two-element counterparts.

The Major Factor

The image is courtesy of HotWater.com. Don’t get yourself mixed up. The amount of water being heated, the method by which it is heated, and the amount of water being utilized are the elements that determine how long it takes the water heater to heat up. The amount of water heated each hour is specified in the heating rates. The capacity of the storage tank indicates how much hot water is immediately accessible when you turn on the faucet. You might consider upgrading to a larger tank if your family is large, has several bathrooms, and has several hot water-consuming activities occurring at the same time on a frequent basis.

Greater tank capacities are designed for homes who require a big volume of hot water in a short period of time.

As a result, a 40-gallon tank will meet your demands, and you will save money by not purchasing a larger 50-gallon tank that you will not need.

See the water heater recovery table in the preceding section.

When using an electric water heater, increase the time by half to 1.5 hours. It goes without saying that you will never have to be concerned about the recovery rate with a tankless water heater. Another point to consider in the discussion over whether to use a tank or not.

How long does it take a new water heater to heat up?

Alisande, I’ll have to acknowledge that when more evidence comes to light, it causes some rethinking in my own way about some things. However, based on what you’ve said thus far, I believe you’re in good health for the time being. It appears that air in the system was the source of your initial problem, as mentioned by the others. However, based only on your description and the absence of any technical data, it appeared to take longer to bring the water up to the temperature you were comfortable with.

  • My opinion is that your relative did not raise the water temperature to the same level as you.
  • In my opinion, a 50 gallon tank is a reasonable capacity for one person, and I believe that if you keep the temperature at 115-120 degrees, you will not run out of hot water provided everything is functioning properly.
  • At this time, my recommendation is mostly in accord with your point of view.
  • Please notify us if anything new occurs; the more information you can provide up front, the greater the quality of the responses you will receive.
  • You’ll soon become known as the “hot water guru” in your neighborhood.
  • Making a livelihood these days necessitates the acquisition of a job and the participation in as many hustles as one is capable of.
  • Many are sold, many are processed for use in the perfume business, and many are used in the production of medical Oris Root products.
  • Someone mentioned another topic in one of the forums, and I assumed they must have recognized who I was talking about.
  • I just pi$$ them off every now and then when I come over and start messing with with things since, to me, these are recreational activities.

How Long Does it Take for Electric & Gas Water Heaters to Heat Up?

An ice cold shower is one of the few things that can completely derail your day, and if you have the improper water heater, this might become your new normal. If your present heater is on its last legs, don’t allow the stress of the circumstance push you into making the wrong decision about your new heater. Before you purchase a water heater, take into consideration how long it will take for your water heater of choice to reach operating temperature. If you want to run a large amount of hot water at the same time, you’ll need a more powerful system than if you merely want to take a hot shower on a consistent basis.

When water reaches the water heater, how long does it take for it to heat up? In spite of the numerous variables that might influence the time required, the chart below illustrates the average time required for each kind of water heater to heat up.

How Long It Takes A Water Heater to Heat Up For The First Time

Water Heater Type Time Takes to Heat Up
Gas Tank 30-40 minutes
Gas Tankless 0 minutes *
Electric Tank 60-80 minutes
Electric Tankless 0 minutes *

*If the tankless water heater is appropriately designed and placed, it may offer practically immediate heat. Source of the graph

How Long Does it Take for a Gas Water Heater to Heat Up?

Once the water has entered the tank, the normal gas tank heater will take around 30 to 40 minutes to heat it. When you first fill the tank with water from your plumbing supply, the tank will heat up for a few minutes. A more detailed explanation of why this takes 30 minutes necessitates the use of mathematics. The size of the heater’s tank is obviously important, since more water will take longer to heat than a smaller tank. The BTU (or British Thermal Unit) rating of the heater is the next most important consideration.

  • A heater with a higher BTU rating will heat water more quickly.
  • Each gallon of water contains around 8.3 pounds of water; as a result, our sample tank has approximately 330 pounds of water to heat.
  • If the water is at 60 degrees and you want to bring it up to 120 degrees, you will need to raise the temperature by 60 degrees to do this.
  • Because of the lower tank size and greater BTU rating, your hot water heater’s warm-up time will be significantly reduced.
  • You will need to keep the following criteria in mind if you want a high-efficiency water heater that will heat your water in the period of time you specify (after it has run out of hot water) and hold a significant volume of hot water.
  • The first time you switch on the hot water after your tank has been holding hot water for a while, you should get hot water in a matter of minutes because tanks store pre-heated water, not minutes or hours.
  • That’s when the gas tank water heater will have to start heating new water from the temperature of the entering groundwater again, which will take longer.

How Long Does it Take an Electric Hot Water Heater to Heat Up?

When compared to its gas equivalents, electric tank water heaters often need double the length of time to heat water. Despite the fact that electric components are often more cost-effective, they cannot match with the great performance of gas-fired systems. It would take approximately one hour for an electric water heater to heat the 40-gallon tank indicated above from the moment new water is introduced. As a result, residences with higher water needs are more likely to choose for a whole-house gas tank water heater rather than an electric type.

Electric variants are ideal for those who live in smaller houses with lower water needs. When it comes to heating water, an electric tank water heater takes 60-80 minutes, compared to 30 minutes for a gas tank water heater.

How Long Does it Take a Tankless Gas Heater To Warm Up?

Tankless water heaters heat your water on demand, which means that the distance between your heater and the device you are using is the only factor that defines how long it will take for you to obtain hot water from your faucet. Ideally, this should not take more than a few seconds with a typical-sized house if the system is functioning properly. It may take a few extra seconds for the water to travel through the water pipes and reach appliances that are located further away from the heater in a large home.

How Long Does it Take a Tankless Electric Heater To Warm Up?

Tankless electric water heaters work in a similar way to tankless gas water heaters in that they only begin to heat your water when an item requires it. This means that unless you turn on the dishwasher or turn on the faucet, the water will not be warmed. The majority of the time, an electric tankless heater will give hot water in a matter of seconds, but they can take a fraction of the time that gas systems do owing to the greater strength of gas heat. Because a tankless electric heater warms water instantaneously, it should only take a few seconds for the hot water to flow through your pipes and into your fixture once it has been heated.

See also:  How Long Does A New Water Heater Take To Heat Up

Factors That Affect Heat Up Time

Apart from the variables we’ve already covered, such as tank size and BTU rating, there are a variety of other elements that might influence how long it takes your water heater to heat water for the first time.

  • Temperature of the incoming water– For both tankless and tank-style water heaters, the temperature of the incoming water will play a role in determining the amount of time it takes to heat up. Because tank heaters retain water and maintain a constant temperature, the entering temperature should have little effect on them. Instead than storing water in tanks, tankless heaters deliver incoming water on demand, only minutes before it flows out of your faucet. In other words, if the groundwater temperature is really low, the water may not heat up as quickly as it could otherwise. Neither kind of heater is impervious to the effects of extremely cold ambient temperatures in the room or area where they are housed
  • Nevertheless, the former is more vulnerable. Water heater settings– Although water heaters appear to be rather basic when compared to other household mechanicals, they frequently have a number of additional features. Whether your heater isn’t operating properly, a professional may be required to inspect it and determine if any settings or calibrations have been altered that are negatively effecting its performance. Maintenance / Expenditure Issues– In the same way that any other mechanical equipment ages and degrades over time, the age and condition of your heater may eventually impact its performance, including how long it takes to heat up. A lack of routine maintenance, particularly a failure to wipe out silt that may have accumulated in the pipes, might also result in performance problems. Those who live in places with hard water are more prone to encounter pipe sediment. When it comes to distance from the appliance, it’s easy for the end user to forget that your hot water is going from the ground to your heater and via the pipes in your home before it reaches the item you are now using. The greater the distance between your appliance and the water heater, the longer it may take for the hot water to reach it. This should be taken into consideration by a knowledgeable installation when setting up your system, so it should not be a significant problem. Pipe Diameter– In addition to the length of the piping, the width of your water pipes may have an impact on how long it takes for the water heater to heat up completely. The use of a broader pipe is advantageous because it can carry more water
  • But, it will take more water to be heated before the pressure is high enough to force the water through the remaining pipe system.

It is important to note that the temperature of the incoming water, for both tankless and tank-style water heaters, will play a role in determining how long it takes to heat up. Given that tank heaters hold water and maintain their temperature, the entering temperature should have little effect on them. Instead of storing water in tanks, tankless heaters deliver incoming water on demand, only minutes before it is released from the faucet. In other words, if the groundwater temperature is really low, the water may not heat up as quickly.

  • When compared to other household mechanical devices, water heaters appear to be quite simple, yet they can have a variety of features.
  • Condition of the vehicle / upkeep Issues– The age and quality of your heater, just like any other mechanical equipment, can have an impact on its performance over time, including how long it takes to heat up completely.
  • Those who live in places with hard water are more prone to have pipe sediment.
  • The greater the distance between your appliance and the heater, the longer it is possible for the hot water to take to reach your appliance.
  • Pipe Diameter– In addition to the length of the piping, the width of your water pipes may have an impact on how long it takes for the water heater to heat up properly.

Because it can carry more water, a larger pipe is advantageous; nevertheless, it will take more water to be heated before the pressure is high enough for the water to flow through the remaining pipe system.

How Long Does It Take a Water Heater to Heat Up?

Are you in the market for a new water heater but are unsure of how to select the most appropriate model for your requirements? Do you regularly run out of hot water in the middle of a shower and wonder what you can do to fix the problem? Let’s have a look at how long it takes a water heater to heat up in real life. In every family, water heaters serve a crucial function; without them, we wouldn’t have enough hot water for our everyday activities. However, they are not magic machines that can produce an unlimited supply of water, and the rate at which they heat up is dependent on a variety of factors.

How Long Does It Take a Water Heater to Heat Up

In terms of water heaters, there is a tremendous range of sizes, styles, and fuel or power sources to choose from. All of these factors have an impact on the time it takes for the water heater to heat up.

Gas Water Heaters

Natural gas boilers are one of the most efficient and long-standing methods of heating water in a household. For a long time, gas has been a popular source of energy. One of the advantages is that energy expenses are kept to a minimum. As an alternative to employing electric components, they heat the water with gas burners that are located at the bottom of the storage tank. As a result, their recuperation period is much shorter. Generally speaking, a standard gas water heater does not take long to heat a full tank of water, however the time may vary depending on the size.

Electric Water Heaters

Natural gas boilers are one of the most efficient and long-standing methods of heating water in a home. Historically, natural gas has been a popular source of energy. Low energy expenses are one of the advantages. The water is heated by gas burners located at the bottom of the tank, rather than electric components, as is the case with most homes. As a result, their recuperation period is noticeably shorter than others. However, this is dependent on the size of the tank. The usual gas water heater does not take long to heat a full tank.

Solar Water Heaters

No other source of energy besides the sun provides electricity for solar water heaters (1). However, because we can’t rely on him to be there at all times, they are frequently backed up by a normal electric water heater. It follows that they require approximately the same length of time as an electric unit. Having said that, there are solar units on the market that are solely powered by solar energy. On overcast days, you should expect a lengthy wait time if this is the case. On really rainy and dreary days, there may be no hot water at all.

  • However, instead of directly creating heat, they make use of the incoming power to circulate the heat, so boosting their efficiency (2).
  • This is often comprised of a hybrid mode as well as a high-demand mode.
  • In hybrid mode, the waiting period for hot water might be up to two hours, depending on the size of the water storage tank used.
  • If you’re searching for a water heater that requires little to no waiting time, a tankless water heater is the best option.
  • They do not have a tank, which means that the water is brought in on demand and is heated as it circulates through the system (3).

There are a variety of sizes available, with the majority of them intended for use as a point-of-use device. Having said that, the average waiting time is less than a minute in most cases.

Factors That Influence Heating Time

The anticipated waiting time is merely a best-guess estimate at this point. Water heaters are impacted by a variety of factors, all of which can have an impact on how long it takes for them to heat up. Some are ubiquitous across all sorts, but others are more specialized to a single type only.

1.First Hour Rating

It is indicated by the first hour rating that the water heater can supply a certain number of gallons within the first hour of operation. It displays the water heater’s capacity to return a full tank to the proper temperature once it has recovered from a power failure (4). A high ranking for the first hour indicates a lower waiting time. In order to determine this value, we need to know the fuel source, tank capacity, and size of the heating components or burners (5).

2.Size of Water Heater

The size of your water heater is another element that might affect how long it takes to heat water. As you can see from our previous samples, a greater tank size requires more time to heat up. This is simply due to the fact that there is more water to heat. Larger tanks would often feature two heating elements or a huge burner to reduce the amount of time it takes to heat up. Despite this, a smaller tank will heat up more quickly. Having said that, the smaller tank will almost certainly run out of fuel sooner than the bigger ones.

3.Inlet Water Temperature

An other aspect that might influence the heating time is the size of your water heater. Because of the bigger tank capacity, it takes longer to reach the desired temperature, as seen in our previous instances. Because there is more water to heat, the temperature has increased. A big burner or two heating elements will be used in larger tanks to reduce the amount of time it takes to heat them. Despite this, a smaller tank will heat up more quickly than a larger tank. Having said that, it is probable that the smaller tank will run out of fuel more quickly than the bigger one.

4.Fuel Type

As you can see from our previous examples, the kind of fuel makes a significant impact in recovery time. When it comes to heating water, gas water heaters are significantly faster than their electric counterparts. This is due to the fact that gas burners attain temperatures that are far greater than those of electric heating components.

Why Is It Suddenly Taking Longer?

Over time, it is likely that your water heater may take longer to heat up. However, if it occurs too soon, keep the following in mind:

1.Sediment Buildup

Sediment accumulation is the most likely cause of your water heater’s unexpected inability to heat water quickly. This is a frequent problem that occurs over time as your machine becomes older. Although it is possible that it will occur sooner if you have hard input water or if you ignore upkeep. When the minerals contained in the water begin to settle on the inside of the tank, this is referred to as sediment building. The phenomenon can occur even with soft water that is low in minerals, although it will often take a bit longer before it becomes evident.

These are located on the tank’s walls and around the heating components, where they can severely impair the tank’s capacity to heat the water in it. The following are the three most obvious indications of a buildup:

  • There is a good chance that sediment accumulation is to blame for your water heater taking longer to heat up. Over time, as your unit becomes older, this is a frequent problem that will arise. Although it is possible that it will occur sooner if you have hard input water or ignore upkeep. Whenever the minerals contained in the water begin to settle on the interior of a tank, this is referred to as sediment building. The problem can develop even with soft water that is low in minerals, although it will often take a bit longer before it becomes obvious. Dissolved elements such as magnesium and calcium are found in the sediment accumulation of a body of water. It is possible that these may accumulate on the tank’s walls and on the heating components, which will significantly reduce the tank’s ability to heat water. When there is a buildup, there are three key symptoms to look for:

The most effective method of resolving this problem is to cleanse the tank on a regular basis. If, on the other hand, you have an electric unit and the heating elements are broken beyond repair, you will need to have them replaced.

2.Needs Troubleshooting

If sediment accumulation isn’t the problem, it’s possible that the heating components or the thermostat need to be checked out for problems. If you have an electric heater, this is a rather simple technique; but, if you have a gas heater, you’ll need some prior knowledge. This is also one of the reasons why we advocate consulting with a professional. If your unit is powered by electricity, the following is a basic description of how to troubleshoot:

  • Turn off the electricity: Before you handle any electrical components, make sure the breaker is in the “Off” position. To gain access to the thermostat, follow these steps: Using a screwdriver, remove the access panel from the wall. Afterwards, carefully remove the insulation to reveal the upper thermostat. Check the battery’s capacity: Make use of a multimeter to check for indicators of voltage on the cables. Before you proceed, make sure that they all have a reading of zero. Adjust the temperature as follows: To adjust the temperature, use a flat-bladed screwdriver to turn the arrow displaying the temperature. Reduce the temperature by a few degrees to see if it helps. To sum it up: Insulation and the access panel should be replaced. When you’re ready, switch on the breaker to bring your water heater back to life.

Deactivate all electrical devices: Before handling any electrical components, make sure the breaker is in the “Off” position. the following steps are required in order to access the thermostat A screwdriver is used to remove the access panel. After that, remove the insulation to reveal the upper thermostat; and Ensure that the electricity is sufficient. Apply voltage to the wires with a voltmeter to ensure they are not faulty. Before you proceed, make sure that they all have a reading of zero: The temperature should be adjusted as follows: Turn the arrow that indicates the temperature using a flat-blade screwdriver.

Lastly, consider the following.

As soon as you’re ready, switch on the breaker to bring your water heater back to life.

This Took a While…

The amount of time it takes for a water heater to heat up is dependent on a number of things. Generalization: Gas-powered devices are substantially faster than electric-powered ones. On the other hand, it is possible that the recovery time abruptly rises, which might be an indication of silt accumulation. If this is the case, flush the tank or contact a professional for assistance with a new system. How long does it take your water heater to get to temperature? We’d love to read your responses, as well as any additional questions you may have.

Leave a Reply

Your email address will not be published.