How To Reset Pur Water Filter Light

Why Your PUR Water Filter Light Is Not Working

The PUR water filter light is a useful indication that indicates when it is time to update or replace the filter in your PUR water system. Even though each sort of system has its own set-up, they all perform in a similar manner. But what happens if the LED on your PUR water filter suddenly stops working? After 1-3 years, the PUR water filter lights may cease to function due to the non-replaceable battery running out of power. If the filter cartridge is not properly placed, if there is debris in the filter housing, or if the reset button is jammed in, the filter light may not function properly or may continue to flash.

We’ll also go over what it means if your water filter light goes green, yellow, or red, and why it’s so important to have a properly operating water filter in your home or business.

What Kinds Of PUR Systems Have A Filter Light?

Many of the most recent filter models include a PUR water filter light as an optional feature. Alternatively, you may visit their Amazononline shop and browse through a variety of systems until you locate one that is appropriate for your needs.

Faucet System

  • PUR PLUS Faucet ChemicalPhysical Filtration System
  • PUR Faucet ChemicalPhysical Filtration System, Vertical (Amazon link)
  • PUR Faucet ChemicalPhysical Filtration System (Amazon link)
  • P The PUR PLUS Faucet ChemicalPhysical Filtration System with BluetoothTM is a chemical and physical filtration system that is attached to the faucet.

Pitcher

  • Filtration System with Chemical and Physical Filtration in an 11-cup Pitcher
  • A chemical and physical filtration system, the PUR 7-cup Pitcher (Amazon link)
  • Filtration System with Chemical and Physical Filtration (PUR PLUS 11 Cup Pitcher)
  • PUR PLUS Pitcher Chemical/Physical Filtration System with 7 Cup Capacity

Dispenser

  • PUR PLUS 30 Cup Dispenser ChemicalPhysical Filtration System
  • PUR 30 Cup Dispenser ChemicalPhysical Filtration System
  • PUR PLUS 30 Cup Dispenser ChemicalPhysical Filtration System

What Is A PUR Water Filter Light?

This mechanism, known as the PUR water filter light, illustrates the filtering process being carried out by your PUR water filter. This tool will notify you when it is time to replace your cartridge. This also alerts users of any possible problems with their system so that they may address them before they become damaging to the user’s health and safety.

Why Does My PUR Water Filter Light Not Work?

There are a variety of reasons why the PUR water filter light may not be functioning properly. Some options are as follows:

  • The non-replaceable batteries have reached the end of their life
  • The presence of a red blinking or flashing light indicates that the filter needs to be replaced. An illuminated red blinking/flashing light that appears after a new filter has been inserted may indicate that there is dirt in the filter housing. The reset button is stuck in the on position.

How Does The Filter Change Light Work?

The Filter Change Light alerts you when it is time to change your filter by detecting the amount of time the filter has been in your pitcher. Make careful to reset your filter change light after each time you change your filter. It changes color depending on how long the filter has been in operation or how much water it has filtered in a certain period of time. After 40+ gallons of water or 60+ days, the filter will reach the end of its useful life. The filter change light is powered by a non-replaceable battery, and while the battery may ultimately fail, the filter will continue to operate.

Green Light

As long as the indicator is green, your water filter is functioning properly. You shouldn’t be concerned about the water that flows through your filter because it is completely safe to drink. It is also expected that the indicator will turn green when the old filter has been replaced. It is possible to notice the green light flickering from time to time, but this is not a problem. When you first switch on your filter, the green light should blink six times, according to the manufacturer’s instructions.

The green light, on the other hand, will also flash at other times other than during the beginning phases of usage. In normal operation, the green light will illuminate when the filter is functioning properly, and it will automatically switch off to preserve energy.

Yellow Light

Depending on why your filter light is becoming yellow or flashing, it might imply one of the following:

  • As a result, if the filter is not properly positioned, there may not be enough suction for the filter to function appropriately. To correct this, tighten the screws around the perimeter of the filter, then check to be that the filter is securely attached to the base. You must prepare for the replacement of the filter.

Red Light

When the system determines that it is time to replace a cartridge, the PUR water filter light will illuminate in red on the system’s display. The PUR water filter light should turn green once all of these elements have been replaced and the system is ready to be utilized. If you observe that the red PUR water filter light is still illuminated after you’ve changed the cartridge, this indicates that either the system has not been properly engaged or that it requires a reset to function properly.

How To Reset The PUR Water Filter Light

Turn off the water supply to your faucet. Remove the PUR Filter from your PUR unit by unscrewing the lid on the PUR unit. Replace the filter with a new one – it is usual for the filter to fit loosely – and screw the lid back onto the unit again. To reset the device, press and hold the reset button for three seconds until all three lights flash simultaneously, then release it. Make certain that the reset button does not become stuck while you are holding it down. Pulling up on the button should cause it to spring back into place if it does not already.

When the filter is in use, turn on the filter lever and make sure the filter light is blinking green.

For Pitchers And Dispensers

After installing a new filter, press and hold the reset button located at the top of the pitcher or on the front of the dispenser for 5 seconds to restart the system. After that, the light will blink green.

What To Do When The Light Doesn’t Reset?

In rare circumstances, the light on all PUR units may not be able to be reset because dirt has accumulated on the filter screen. A result of this is that the system concludes that your filter is unable to work properly. To ensure that any trapped debris is removed from the filter housing, you should first rinse the whole filter housing. Following drying, reassemble the entire system and press the reset button for three seconds (for PUR faucets) or five seconds (for other faucets) (for PUR pitchers or dispensers).

What Do I Do If The Light On My Pitcher Is Out?

The light on your pitcher should illuminate each time you use it, and it should be one of three colors: green, yellow, and red, depending on where you are in the filter’s lifespan. If you want to manually test it, simply hold down the reset button for 3-5 seconds (faucet = 3 seconds; pitcher/dispenser = 5 seconds), and then release it. If nothing happens, it is probable that the non-replaceable batteries have run out of power.

What If The Green Light On My Pitcher Isn’t flashing After I Pour?

Continue to hold down the reset button for 3-5 seconds, and then release it when the green light begins to flash.

How Long Do PUR Filter Batteries Last?

PUR is a little hazy about how long the batteries in their faucet mount systems, as well as their filter pitchers and dispensers, will endure.

According to the manufacturer, the battery would ultimately run out “after years of use.” Many reviews and testimonies, on the other hand, claim that the PUR filter light batteries last between one and three years.

The Importance Of Having A Functional PUR Water Filter Light

Because it assists you in determining whether or not your PUR water filter needs to be replaced, it is useful to have the PUR water filter light operating on your system. A properly functioning PUR water filter produces clean, clear, and pleasant drinking water, making it ideal for individuals who are sensitive to particular mineral content or for those who simply want a refreshing glass of water that tastes wonderful and is good for them.

What Are The Benefits Of Having PUR Water Filters?

  • Improved senses of taste and smell PUR water filters are extremely successful at eliminating strange tastes and smells from water
  • They are also quite affordable.
  • Water that is better for you. Several studies have demonstrated that heavy metals such as lead, copper, and mercury increase the chance of developing cancer. Adsorption is the mechanism through which PUR water filters remove certain pollutants.
  • Cost-effective. When opposed to purchasing bottled water on a regular basis, using PUR water filters will save you money.
  • Environmental protection is important. The consumption of bottled water is related with an increase in environmental contamination. Worldwide, one million water bottles are sold every minute, according to the International Water Bottle Association. A little more than half of them are recycled, with the other portion ending up in bodies of water such as lakes and seas. You may save money on bottled water by using a water filter instead of buying single-use bottles.

How Long Does A New PUR Filter Last?

After two months, after the PUR filter has filtered about 40 gallons, it will need to be replaced with a new one. When the filter is nearly at its full capacity, a yellow light will illuminate on your system, signaling that it is time to replace it. When the yellow light illuminates, it indicates that you have approximately one or two gallons of fuel left. If the filter is not brand new, it is possible that it is time to change the filter.

Replacement Filters

Change your filter is simple and affordable – here are several PUR replacement filters that are now available on Amazon.com (click here). With Lead Reduction, the PUR PLUSFilter is an excellent choice. PUR BasicFilterPURBasicandClassicFaucetFilterPURBasicandClassicFaucetFilter Pur Mineral CoreFaucet Filter (PUR Mineral CoreFaucet Filter)

Why Is My PUR Water Filter Blinking Red After Filter Change?

It is possible that dirt particles trapped on the filter have caused your PUR water filter to continue to glow red even after you have changed the filter. After filtering 100 gallons of water, your PUR water filter will glow red to indicate that it has completed its task. If you have recently replaced the filter unit in your system, the blinking light is a false warning. Should you be concerned about this? That is not correct because you have only recently replaced the filter. You will be able to deal with the situation with a few simple moves.

More information about how your PUR water filter works may be found in the next sections of this article, which also includes answers to some of the questions you may have about using a PUR water filter.

You may also be interested in:

  • How to Change a Pur Water Filter | 12 Steps (with Pictures) Step-by-step instructions on how to clean a PUR water filter Recommendations for the Best Tier 1 Water Filters

How Does The PUR Water Filter Light Work?

First and foremost, a PUR water filter is intended to remove dangerous contaminants from your drinking water, therefore making it safe to consume. Lead, chlorides, mercury, iron, pesticides, iron, arsenic, and even scents are examples of such chemical substances. When your PUR water filter is in good working order, the only way to tell is by looking at the light indication on the unit. The filter will also alert you if it is no longer able to remove certain chemicals from the water it is filtering.

Green, yellow, and red are the colors that are most likely to blink on your PUR water filter; the others are blue and purple.

Green:This light informs you that your filter is in great functioning condition.

It will soon no longer be able to filter your drinking water.

Red: The color red represents danger or a faulty system. What we’re learning in this essay is exactly that. To learn more about why your PUR water filters are blinking red following a filter change, continue reading this page.

Why Is My PUR Faucet Filter Still Blinking Red?

Understand what the different colors on your PUR faucet filter indicate now that you’ve seen them all. From here on out, we’ll be concentrating on the red indication. You’re probably already aware that when appliances and other machinery flash red, it’s a warning message to pay attention. Those are the messages that your PUR faucetfilterred blinks are sending to you. It is a sign that the filter has failed to remove dangerous elements from your drinking water as intended. According to the manufacturer, the system should last 100 gallons before failing!

  • Unfortunately, it hasn’t even worked on a single gallon of water, and it’s already flashing red in the face of failure.
  • There are three possible explanations for why your PUR faucet filter continues to glow red: Your filter has traces of particles caught on it, which is causing it to malfunction and generate an incorrect alarm.
  • It is necessary to wipe the outside of the unit on a regular basis with a light dishwashing solution and a sponge for hygienic reasons.
  • In order to resolve the issue, get a replacement from a PUR retail location in your area.
  • Another cause is that the filter is not resetting when the filter is reset.
  • The technical words are not anything to be concerned about.
  • Filter mounting brackets that are vertical
  • Remove the faucet filter and replace it with a new one in the system. Manually resetting the button within the canister with your index finger is possible.
See also:  How Often To Replace Water Filter

Remove the faucet filter and replace it with a new one in your system. Manually resetting the button within the canister with your index finger

  • Remove the filter from the water
  • Using a clean, dry cloth, wipe the cap and the system
  • Replacing the filter in the system is a must.

It is necessary to press the reset button for three seconds on some versions in order for all of the lights to flash. Check to see that the reset button does not become stuck. If this is the case, raise it back to its original position.

Where Is The Reset Button On A PUR Water Filter?

Now that we’ve discussed the reset button that you must push in order to manually restore the PUR lights to their usual operating state, you’re probably wondering where you can locate it. The button may be found within the chamber on the left-hand side, near where the water comes out. It’s 12 inches long and takes only a single push to be removed and the lights reset.

How Long Do You Run Water Through A New PUR Filter?

A fresh PUR filter will need you to change it every three months. A total of 100 gallons of water will have been filtered by this device.

When your system is on the verge of hitting the maximum contamination level, a yellow light will illuminate to alert you that it is time to replace your old filter. It means that you have one or two gallons left when the yellow light turns on. Now is the time to take action!

Why Is My PUR Water Filter Light Not Working?

As we explained previously, this is a troubleshooting mistake that has to be addressed. Because the indication is in idle mode, your PUR water filter light is not functioning properly. It’s a piece of cake! Simply push and hold the button for a couple of seconds to begin. As soon as you press the button again, the light should begin to flash. PURwater filters are built to last and are simple to use. They just necessitate a few troubleshooting techniques, such as those that we have examined for you.

The most appropriate course of action is to seek the advice of a PUR technician.

If the issue is related to a unit failure, they will contact you and advise you appropriately.

You may also be interested in:

  • 51+ of the most amazing new kitchen gadgets that have been introduced this year
  • This article contains evaluations of the nine top Kuppet portable washing machines for the year 2021. This article lists the top five best direct drive washing machines for the year 2021. What Is the Function of a Bread Box?

How to Reset a PUR Water Filter without Tools Required?

After changing your water filter, you must make sure that your PUR water filter lights are properly reset. If you’re wondering how to reset a PUR water filter, don’t worry, it’s not a difficult process. It is as simple as pressing the reset button on the PUR water filter to complete the process. When it comes to pitcher filters and faucet filters, this page covers where the button is placed and how to press it in great detail. There are also suggestions on what to do if your faucet filter light stays illuminated.

How to Reset a PUR Water Filter

It would also be necessary to do a PUR filter light reset in conjunction with changing the PUR pitcher water filters that include indication lights. After changing your water filter, you should make sure that your filter lights have been reset, since the lights would keep track of the amount of time that your filter was in use during that period. The added job of resetting the filter lights is insignificant, and it may even be completed by a youngster with minimal assistance. To reset the PUR water filter light on a pitcher filter, all you have to do is push the reset button on the filter.

Then you’d have to hold it down for five seconds before letting go of the handle.

In this case, the lights on your pitcher filter have been reset.

2. Reset the PUR Faucet Water Filter Lights

The advantage of having water filter lights on your faucet filter is that you don’t have to worry about resetting the lights every time you change your filter. This would assist to guarantee that the water supply from the faucet was clean at all times. In order to reset the PUR filter light for the faucet filter, follow these instructions:

  • Remove the filter system from the faucet by unscrewing it. Unscrew the back cover of the housing to have access to it. Take the filter out of the housing and set it aside. Multiple times press on the reset button on the housing, which is situated in the bottom right corner, until it eventually appears. Replacing the filter in the housing and covering the housing with the cover are the next steps. Reconnect the filtration system to the faucet

Following the completion of the aforementioned processes, the green light will begin to flash. By that time, your faucet filter has been successfully reset.

PUR Water Filter Lights Meanings

PUR water filter lights are available in three colors: green, yellow, and red. When the indicator is green, you can rest certain that your water supply is free of contaminants and suitable for drinking, since it signifies that the filter is performing as promised by the manufacturer. In some cases, after the filter has been in use for a lengthy amount of time, you may notice that the light has changed to yellow, which indicates that the filter’s life is reaching its conclusion. While the life period of PUR filters varies depending on the kind of filter used, in general, faucet filters may filter up to 100 gallons of water for up to 3 months, while pitcher and dispenser filters can filter up to 40 gallons of water for up to 1 to 2 months.

Consequently, filter lights are quite beneficial since they allow you to identify when to change your filter with greater precision.

As soon as the indicator goes red, it indicates that the filter has reached its maximum capacity. By that time, the filter has already been clogged with pollutants and is no longer capable of filtering your water properly. This would necessitate the replacement of the filter immediately.

Why Your PUR Faucet Water Filter Still Blinks Red and How to Resolve It

It’s possible that you’re experiencing problems resetting your PUR faucet water filter for one of two reasons. These are the reasons, as well as their answers, which are listed below: If there are any remaining impurities in the system, it’s probable that they’re causing the faulty alert to be generated. In order to resolve this, you’d have to do the following:

  • Remove the filter system from the faucet by unscrewing it. Take the filter out of the water
  • Wash and rinse the filter and housing well with water, using your hands to thoroughly clean them. Allow everything to dry completely. Place the filter back into the housing once they’ve been completely dried. Reconnect the filtration system to the faucet

Circuitry that is not working properly If the circuit of your filter has been destroyed, you will need to have it changed as soon as possible. In order to resolve the issue, you can visit any PUR retail location and purchase a new circuit. In addition, you would require the assistance of a technician.

Conclusion

The PUR water filter lights are a welcome convenience for our water filtering requirements, and they significantly assist us in obtaining safe drinking water for our use. When changing your pur water filter, it’s critical that you know how to reset the pur water filter light. The process of resetting the filter lights is not difficult. Simply follow the simple instructions outlined in this post, and they would be up and running in no time at all. Furthermore, if you ever experience an issue with your faucet filter, it is not difficult to resolve.

Where is the reset button for PUR water filter?

How to Reset the PUR Water Filter Light (with Video)

  1. 1. Remove the filter and replace it with a new one when the light becomes red. The second step is to press and hold the “reset” button for 5 seconds. Step 1: Thoroughly rinse the whole filter housing. 2. Allow everything to dry completely before reinstalling anything.

Second, what is the location of the reset button on a Brita filter? Each time you replace your filter, be sure to reset your filter change indicator:

  1. To reset the indicator, click the “RESET” button (also known as the “STATUS” button on some versions) located below the lights on the indicator. When the green light begins to blink, press and hold the button for a few seconds.

Also inquired as to why my PUR water filter was not functioning. One of the most often encountered problems with the PUR water filters is that they become blocked. If your filter is draining slowly or not at all, this is an indication that the dirt that has gathered in it is blocking it and preventing it from performing its function properly. How long does a PUR filter last before it has to be replaced? a period of two to three months

How to Reset PUR Filter

It is impossible to overstate the importance of water in human life at any time. Water is one of the most important elements required for the growth and development of the body. Water is obtained from a variety of sources, the majority of which are unreliable. Given the fact that water is essential to the human body, it is imperative that it be clean and safe to consume. A slew of processes and pieces of equipment have been put in place just to ensure that we have access to safe drinking water.

PUR water filters are well-known for their ability to remove almost all industrial pollutants from water.

To ensure that the equipment may be used indefinitely, it is necessary to understand how to reset the PUR filter after each use.

How to Reset PUR Filter Meaning

What the light on your PUR water filter indicates about the cleanliness of your water is important. This is due to the fact that it is what allows you to determine whether or not the filter is performing properly. If you want to get the most out of your PUR water filtration system, you need to make sure that the light is operating properly.

If you know how to reset your filter light difficulties, you won’t have to be concerned about the quality of your water any more. There is no assurance that these issues will not manifest themselves, so you must be prepared to deal with them when they do.

PUR Water Filter Light Meaning

A light indication is included with PUR water filters. This light indicates whether or not the water is safe and healthful to consume. In this case, it serves as an indicator that your filter needs to be replaced. It will also notify you when the filter is no longer capable of producing clean water for you. Three separate lights are included with the water filter, each of which signals a different function. The color of the water filter light varies depending on how much water has been filtered.

See also:  How To Maintain Tankless Water Heater

Thus, the light indicator, which changes color when the light is turned on, aids in this process.

PUR Water Filter Green Light

The presence of a green light on the water filter indicates that the filter is operating properly. The water is devoid of bacteria and pollutants, and it is perfectly safe to drink in any situation. Once you see the green light, there is no reason to be concerned. It is expected that the indicator will turn green when you replace the filter. All in all, the green light indicates that the PUR water filter is in excellent working order. The green light, on the other hand, may flicker from time to time.

The indicator should flash the green light six times, according to the manufacturer’s specifications.

This does not necessarily imply that there is a problem with the filter.

PUR Water Filter Yellow Light

The presence of a yellow light shows that the water filter has been purifying water for a long time and is nearing the end of its serviceable lifetime. After filtering about one hundred gallons of water, your PUR filter may have reached the end of its useful life. When the light changes from green to yellow, it is an indicator that you need to replace the filter as soon as possible. You are not required to wait for the filter to become red before replacing it, as previously stated. The yellow light serves as a warning, and you should pay attention to it whenever it appears.

PUR Water Filter Red Light

According to the red light on the water filter, the filter has successfully filtered up to 100 gallons of water. It indicates that it is no longer capable of preventing pollutants and impurities from entering the water. The flashing red light is signaling that you must halt. When the indication light on the filter turns red, you should stop drinking water from the filter. At this moment, the water is not safe and healthful to drink due to contamination. It is imperative that you replace the water filter as soon as the red light appears.

How to Reset PUR Water Filter Light

According to the red light on the water filter, the filter has successfully filtered up to 100 gallons of water. Therefore, pollutants and impurities are no longer prevented from entering the water supply.

This means that you must come to a halt at the red light. It is not recommended to consume water from the filter when the indication light is red. As of right now, the water is not safe and healthful to consume. When you notice the red light, you must change the water filter right away.

  • Rinse the filter housing with water. Allowing for air drying, reassembling all of the housing units is recommended. For a few seconds, press and hold the reset button. If this restores it to its original state, you’re fine to go.

If this does not successfully reset the water filter, you should hunt for the source of the problem elsewhere. It is possible that the problem is under the filter. When you remove the filter, you will be able to see a sensor that is built into the housing of the filter. This sensor has the potential to become stuck, preventing the light from returning to its original position. If this occurs, it is a simple matter to rectify the situation. Jerk the sensor off using a tiny knife or any other sharp object, and it will be freed from its grip.

This should take care of the problem.

Why PUR Water Filter?

No matter how clean the water looks to be, there are some pollutants that are not visible to the naked eye, such as bacteria. There are toxins in the water from the spigot that are detrimental to the health. As a result, water filters are required. Filters for PUR water filters are intended to sift out any pollutants that may be present in the water being filtered. Water filters assist in the removal of contaminants from water by minimizing pollution in water via the use of chemical or physical processes.

It is equipped with an LED indication that alerts you when it is time to replace the water filter.

Why is My PUR Filter Slow?

One of the most prevalent complaints about the PUR filter is that the water filter is too sluggish to filter the water. You’ve only now noticed that your water filter is operating a little slowly. Fortunately, it is not a tough issue to resolve, and you can do it in a matter of minutes.

  • Make a big jar of water and place the filter in it. If it floats, this indicates that the problem is caused by air bubbles. a. Take the filter and smack it against a sink or a wall, but not too hard, to clear it out. Repeat this process a few times and then return to the water. By now, the filter should have begun to sink. Incorporate the filter back into the water pitcher, and the problem should be rectified
  • If the filter continues to be sluggish after completing the steps above, you may have another problem on your hands to address. This might be caused by minute particles or other materials obstructing the filter’s operation. In order to clear out anything is clogging your filter, spray water directly into it
  • After that, your filter should be up and running.

Pur water filter light reset

Make a big jar of water and place the filter in it. If it floats, this indicates that there are air bubbles in the filter. Toss the filter against a sink or a wall, but don’t strike the filter too hard. Repeat this process many times before returning to the water. By this point, the filter should have sunk. Replace the filter in the water pitcher and the problem should be cured; if the filter is still sluggish after doing the steps above, you may have another problem on your hands. A little particle or piece of substance may be clogging the filter, resulting in this problem.

Does the PUR Filter Remove Fluoride?

Fluoride is a very poisonous substance that is extremely destructive to the body’s organs. Fluoride is not removed from water by using a PUR filter. Osmosis and the distillation technique are the two methods that can remove it mechanically from the water supply.

Do PUR Filters Remove Chloramine?

Chloramines are very dangerous compounds. To remove them from water, you’ll need a carbon filter with a lot of capacity.

Can I Run Hot Water in My PUR Water Filter?

You are not permitted to use water that is hotter than 100°F in the filter. It has the potential to cause harm to the filter and affect its effectiveness.

Does the PUR Filter Remove Bacteria?

PUR filters are capable of removing up to 99 percent of microbial cysts present in water sources. As a result, they can be used in water filtering.

Conclusion

By filtering water, the PUR water filter offers you with safe and clean water. They aid in the removal of pollutants and toxins found in water, therefore making it safe for consumption. The water filter is a typical product that is readily available on the market. They are also simple to operate. There are LED indicators built into the water filter that function as a warning system. The light comprises three indicators, each of which performs a different purpose. The indicators are green, yellow, and red.

This is why it’s important to understand how to reset the PUR filter.

Why Is My PUR Water Filter Blinking Red After Filter Change?

If you have a PUR filter, you must be familiar with PUR water filter troubleshooting in order to make your life with filters easier. I get a lot of questions about why my PUR water filter is blinking red after it has been changed. When people notice a red blinking light on the PUR filtering unit shortly after replacing it, they get concerned. Take no fear, I’m here to guide you through all of this blinking and offer you a clear understanding of what each color grade in the PUR water filter indicator light implies.

What are the Best PUR Pitcher Water Filter Replacement Cartridges?

Image Name FEATURES
Top Pick

Leave a Reply

Your email address will not be published.