Where Is The Water Filter For Samsung Refrigerator? - ERNIEGRAVES

Replace the water filter in your Samsung refrigerator

You’ll need a clean water filter if you want to drink clean, filtered water.Every six months, we recommend that you update the water filter in your home.Water filter light on the refrigerator will alert you when those six months are up and should be reset once the filter has been replaced or replaced with another one.

Please keep in mind that only Samsung Genuine Filters that are intended to operate with your Samsung refrigerator should be used.It is possible to purchase them immediately from our website.Third-party water filters should not be used since they may leak and cause damage to the refrigerator.

There are three different types of Samsung water filters, so you’ll want to be sure you’re getting the right one for your refrigerator before purchasing one.
To begin, identify the filter in your refrigerator’s model.
If you’re confused about where to look, see your model’s user manual.

Then, on the filter itself, look for the model number printed on it.This will inform you of which of the following filter types you will require for your application.The process of replacing your water filter is straightforward and should take no more than a few minutes.

If you’re not sure whether or not you need to replace the filter, look for an indication light on your refrigerator.After six months, the indication will be replaced by another.On certain models, it will illuminate when it has not previously done so, while on others, it will become red.You should alter the filter as soon as possible at this point.

The HAF-CIN and HAF-QIN filter types are as follows:

After turning off the water, identify the filter and clean it as needed. If you are unclear of where it is, please refer to your user handbook for assistance.
After you’ve opened the water filter cover, spin the old filter counterclockwise to unlock it.
Afterwards, just pull it straight out of the filter housing to remove it.
Prior to placing the new filter in the system, remove the protective cover from the top of the existing filter. Afterwards, insert it directly into the filter housing and rotate it clockwise.
Double-check to see that the lock symbol corresponds to the indication line.

HAFCU1 filter types:

After turning off the water, identify the filter and clean it as needed. If you are unclear of where it is, please refer to your user handbook for assistance.
Using a left-handed twist, you can remove the old filter. It will be unlocked as a result of this.
Then, using your fingers, lift it up and away from the filter housing.
The replacement filter should be inserted by pushing it up into the filter housing and then turning it to the right.
Check to ensure that the notch at the top of the filter corresponds to the arrow on the filter housing. •
Replace your filter and then flush it thoroughly with a few liters of water to wash out any contaminants or air that may have gotten into it. Then, make sure that the water filter light on your refrigerator is turned back on. Please refer to the following sections for further information.

On your refrigerator, the water filter light is controlled by a timer, and it will illuminate after 6 months of inactivity.When the indicator is constantly on, it will turn red after 6 months for models with this feature.If the water in your location is of poor quality, or if you dispense a large volume of water, you may need to change the filter more frequently than the light indicates.

To determine if a new filter is required, dispense water with the filter installed first, followed by water with the filter removed second.If the rate at which the water is dispensed differs considerably from the normal rate, you should replace the filter regardless of whether the indicator is illuminated.You may reset the filter light by following the procedures outlined below:

If the Filter Reset button is accessible on the control panel, locate it and press it. It is occasionally used as a supplemental purpose for another button on the control panel.
Once you’ve found the proper button, press and hold it for three seconds to bring the light back on.
When the filter icon is reset, it will either turn off or revert back to its original color depending on the setting. This restarts the timer for the next six months.

Please keep in mind that some models may require you to press two buttons at the same time in order to reset the light. Touch screen models will instead make use of on-screen menus. Consult your refrigerator’s owner’s handbook for detailed operating instructions.. The water filter light and timer on your Family Hub refrigerator may be reset by doing the following steps:

Fridge Manager can be accessed from the Home screen by selecting Apps and then Fridge Manager.
Water Filter should be selected first, followed by Reset and then Proceed. This will reset the filter light and the timer on the filter.
If you require a Samsung water filter, you may purchase one by hitting the Buy Filter button after tapping the water filter symbol.

On models RF4289 and RSG309, you may also reset the filter light by pressing the reset button.

Tap Water Filter once you’ve navigated to the Settings icon at the bottom of the screen and selected it.
As soon as the Water Filter menu appears, press Next three times in the lower right corner of the screen until you reach page 4/4 of the Water Filter menu.
Using your finger, press and hold ″Reset the water filter″ in the centre of the display until the filter’s state changes.
After the message ″Filter Replaced″ appears and disappears from the screen, select Save in the bottom right corner of the display.

In order to define what is filtered by a water filter, the National Sanitation Foundation (NSF) and the American National Standards Institute (ANSI) have developed a variety of standards.Samsung’s water filters are Carbon Filters that meet the requirements of the NSF/ANSI 42, NSF/ANSI 53, and NSF/ANSI 401 standards, among other requirements.Aesthetic impurities such as chlorine and taste/odor are reduced using the NSF/ANSI 42 filtering system.

NSF/ANSI 53 is a standard that specifies how a product should be designed, manufactured, and tested. Certified to decrease a pollutant that has a negative impact on health. This standard specifies the health consequences that are controlled by the Environmental Protection Agency (EPA) of the United States and Health Canada.
Lead, Lindane, Mercury, O-Dichlorobenzene and P-Dichlorobenzene
Tetrachloroethylene
Toxaphene
Turbidity
Asbestos
Atrazine
Benzene
2, 4-D
Carbofuran
Chlorbenzene
Endrin
Ethylbenzene
Lead
Endrin
Ethylbenzene
Lead
Endrin
Ethylbenzene
Lead

Verified to decrease one or more of the 15 emerging pollutants from drinking water according to NSF/ANSI 401. These emerging contaminants can be pharmaceuticals or chemicals that are not yet regulated by the Environmental Protection Agency or Health Canada. Examples include: atenolol, bisphenol A, carbamazepine, DEET, Estrone, Linuron, nonylphenol, phenytoin, trimethoprim
atenolol, bisphenol A, carbamazepine, DEET, Estrone, Linuron, nonylphenol, phenytoin,

If you are experiencing difficulty installing the new water filter in your refrigerator, despite the fact that the last one was successful, please refer to our troubleshooting guide for assistance.

How can I find out which filter to use with my Samsung refrigerator?

The type of filter that you will need for your refrigerator may vary based on the model that you have.The model number of your refrigerator may be found in two locations on the appliance.On the exterior of your device, on the bottom left side, there is a sticker with the model and serial number of your device.

Another sticker may be found inside your fridge, on the wall above the top shelf, near the door.Once you’ve identified your model number, follow the procedures outlined below to determine the filter you’ll need.2 Enter your model number into the search box located at the top right of the page.

3 Continue to scroll down the list of components until you find the filter that you require for your device.
4 If you are unable to locate your device or want more assistance, please contact Samsung Support.
Please keep in mind that you should only use Samsung official or Samsung certified components, otherwise you run the risk of electric shocks and device damage.

Thank you for your feedback!

Please respond to all of the questions.

Contact Info

Online

There are a variety of various methods to get in touch with us, including Live Chat, Email, and more.

Call

Speak with a member of our knowledgeable and devoted staff.

Face to face Support

Whether your product is still under warranty or has expired, we are here to assist you.

How to clean Samsung fridge water dispenser?

Refrigerators have made significant advancements in recent years, and the numerous functions that are now available make them a must-have in any modern kitchen.The total cost of the refrigerator has also reduced significantly over the previous several years, making it a more economical investment for you to make.When purchasing a refrigerator, there are several factors to consider, such as amenities such as a water and ice dispenser, which will make the refrigerator much more easy to use on a daily basis at your home or office.

Let’s take a closer look at the water and ice dispenser functionality.It is particularly useful during hot summer days when you need to get a cold drink of water without having to go through any hoops or go through a lot of effort.It allows you to enjoy clean drinking water fast and conveniently, providing you with a refreshing break throughout a hectic day.

The water dispenser in the refrigerator is really convenient, and one of the most essential aspects is that it provides you with filtered water, which is extremely vital.
It removes all of the pollutants, including as lime and lead, that may be present in your drinking water supply.
Aside from that, some water dispensers are equipped with an ice dispenser that can be used to dispense ice cubes anytime you require them.

Despite the fact that this function is only available on higher-end refrigerators, it is well worth the price.When cleaning the kitchen or the refrigerator, it is easy to ignore the most crucial aspect of the refrigerator.In the course of regular usage, the hot water dispenser in your refrigerator will grow unclean and eventually cease to provide you with clean drinking water for consumption.

The majority of us consider this to be a tough undertaking and hence leave them filthy.Although this is true in certain circumstances, cleaning a water dispenser will need you to put in some effort, it is necessary so that you may enjoy clean and bacteria-free water.Cleaning a non-plumbed water dispenser is much easier than cleaning a piped water dispenser, but you may clean the plumbed water dispenser that comes with the Samsung American fridge freezer by following the proper procedure.If you’ve been seeking for the best way to clean the water dispenser in your Samsung refrigerator, you’ve come to the correct spot.

The following instructions will assist you in quickly and easily cleaning the water dispenser on your kitchen counter top.If you want to understand more about it, we’ve provided a step-by-step tutorial that you can follow through the whole text.

Why should you clean the water dispenser?

Any equipment that comes into contact with water should be thoroughly cleaned after a time.You may have observed that a water bottle begins to grow certain things at the bottom, as well as that the color of the bottle begins to change.As a result, you decide to clean the water bottles once a month, and you should also clean the water dispensers on the same schedule.

Additionally, if you have hard water available in your location, it can cause calcium to build up inside of your water dispenser over time, which can slow down the flow of water as well as impair the chilling function.It will ensure that you receive clean drinking water and that the dispenser is clear of bacteria if it is cleaned regularly.You should also clean the filter that is attached to the water dispenser, which should be done at the same time.

These are simply removable, and you can quickly get a new one from the market to use in place of the old one..

How often should you clean the water dispenser?

The frequency with which you use the water dispenser has a significant impact on how often you must clean it.The frequency with which you use it to have a glass of cold water or ice cubes in your drink will determine how often you have to clean it.If you do not use water and instead use a filter linked to your refrigerator’s water supply, you need clean it more frequently.

Cleaning the water dispenser once every two months will be sufficient to maintain it clean, and you may clean the water filter on a quarterly basis if necessary.

Cleaning the Exterior

Starting with the outside, you may gently wash the digital panel and the other components with a clean piece of cloth to get them clean.In addition, the surface of the door, including the handles, can be cleaned, and the cabinets, which are constructed of stainless steel, are simple to clean.When cleaning the surface, avoid using any chemicals like as thinner, bleach, or benzene since they may cause damage to the outside and even a fire if used improperly.

Let’s have a look at how you can clean the water dispenser from the inside out now.

Cleaning the Interior

Starting from the inside out, we can simply flush out the water cooling system with distilled vinegar, which will dissolve the majority of the calcium buildup inside and disinfect it.
However, before we can do this, we must first turn off the water dispenser’s power and disconnect the pipe that is connected to the water tank.
It is possible to remove the pipe by unscrewing the nut and sliding the pipe out.
Using a tiny funnel, carefully fill the tube with three to four cups of distilled vinegar after removing the power supply and tube from the circuit breaker box.
Vinegar will run out of the tube and into the water reservoir as the tube is closed.

Make sure to keep the tube upright so that all of the vinegar may be absorbed.
If your water dispenser also has an ice dispenser function, be sure to turn that feature on so that the vinegar may pass through it and clean the system while you’re drinking.
The next stage would be to flush the vinegar out of the system, which would take some time.
This may be accomplished simply keeping the faucet open until all of the vinegar has been released.
Using a little brush, wipe the aperture of the tap with the same vinegar that you used to clean the tap itself.
Now that you have completed the aforementioned processes, we must wipe out all of the vinegar that has accumulated inside the water dispenser.

Replace the water supply pipe that was disconnected and screw it back into place to complete the connection.
Now, activate the function and pour at least 10 to 12 glasses of water out of the dispenser until there is no longer any odor of vinegar left to smell.
Make the same adjustments to the ice dispenser, and you can verify this by tasting the water that comes out of it.

Conclusion

Despite the fact that there are other cleaning substances available on the market, we found this to be the most convenient.
Almost everyone has one of these laying around in their kitchen, and we use it to clean the water dispenser anytime we need.
If you have any questions or encounter any difficulties while following the procedures we have outlined, please let us know so that we can assist you.

How to Change the Water Filter on a Samsung Refrigerator

You’ve been ignoring the Change Water Filter Indicator on your Samsung refrigerator for a little bit longer than you should have.
If this is the case, don’t waste any more time!
Follow these simple step-by-step directions to learn how to replace the water filter in your Samsung refrigerator.
Replace your Samsung water filter on a regular basis to ensure the health of your family and the longevity of your refrigerator!
A clean water filter installed in your Samsung french door, four flex, or side-by-side refrigerator may make a significant impact in the quality of your drinking water and food preparation.

Aside from that, keeping a clean water filter minimizes sediment accumulation, which can result in a water dispenser or ice machine repair issue down the line.

Step-by-Step: How to Change the Water Filter on a Samsung Refrigerator

If you don’t have technical skills, changing your water filter is a breeze thanks to a Samsung design. You can begin by following the steps outlined in this document.

Step 1: Purchase the Correct Samsung Water Filter

We strongly advise you to get the Samsung Factory Water Filter.
If at all possible, stay away from knock-off brands.
Although they are less expensive, the quality is not similar.
The Samsung Factory Water Filter may be ordered online through Amazon, where it is often delivered the following day via standard Prime or the next day with Free 2-hour delivery via Prime Now.
We encourage that you sign up for the Amazon Subscribe and Save program in order to save money on future purchases.

To ensure that you never have an out-of-date water filter again, schedule your water filter to be delivered automatically every five months.
You may also check local retailers such as Lowe’s, Home Depot, or an appliance parts store in your area for replacement components.

Step 2: Verify you have the right part!

Refrigerator water filters are model number specific, which means that you must use the exact filter for your refrigerator and not just any water filter.
WARNING: Before opening the package, double-check that you have the appropriate filter.
It is not possible to return the water filter once it has been installed.
The water filter component number DA29-00020B (shown below) is used in the majority of Samsung french door, four flex, and side-by-side refrigerators; however, you should check the refrigerator model number to ensure that you are purchasing the proper filter for your product before completing the purchase.
Filters from Samsung are valid for 300 gallons or six months, whichever comes first.

See the following specifications for further information: Your Samsung water filter will be sent with a new water filter, an instruction manual, and sticker reminders for the filter’s expiration date.

Step 3: Locate the Samsung Water Filter on Your Refrigerator.

The position of the water filter is determined by the setup of your Samsung refrigerator.
The water filter on French Doors and Four Flex models is positioned between the produce drawers in the fresh food part of the french door refrigerator (as pictured below).
Located on the fresh food side of the bottom drawer on the right-hand side of a Samsung side-by-side refrigerator, the water filter removes contaminants from the water.

Step 4: Prepare the Filter for Installation

Simple removal of the plastic wrapping and removal of the top cap are all that is required to ready the filter for installation. A well designed filter will look something like this…

Step 5: Install the Samsung Water Filter

Installing the water filter is accomplished by turning the filter knob to the left.
It takes approximately 1/4 turn to unlock the filter.
If possible, you should be able to remove the filter without having to switch off the water supply.
To release the filter, slowly move the refrigerator forward and switch off the main water supply.
In order to install the replacement filter, screw it into place with a quarter-clockwise turn.

When the filter is locked in place, you may hear a pressure noise, which is completely normal.
Count forward six months and place the appropriate sticker on the filter handle to remind you when the filter needs to be replaced, as shown in the illustration below.

Step 6: Purge 1 Gallon of Water

1 gallon of water should be sent through the filter. For the first 3-5 seconds, you may hear some air in the lines. This is quite normal. Remove the water from the container. It’s now time to put your water dispenser to work!

Step 7: Reset the Change Water Filter Indicator

By pressing and holding the Crushed Ice button for three seconds, you may reset the Change Water Filter Indicator light. Do you need assistance with the water dispenser or ice maker on your Samsung refrigerator? In order to receive Samsung Certified Care on your refrigerator, please contact Unique Repair Services.

Samsung refrigerator filter reset step by step (rf28r7351sr, rf23j9011sr, rf28k9070sr, rf28r7201sr, rf22k9381sr, rf28k9380sr/aa, rf28r7351sg)

Make sure you have the correct filter for your Samsung refrigerator.
Discover where on the fridge a filter has been fitted and mark it.
Replace the old filter with a new one after removing the old one.
Fill reservoirs with one gallon of water each and purify the water via a filter to remove any contaminants.
Finally, the indication for changing the water filter should be reset.

How to Reset the Samsung Refrigerator Filter in Step by Step Instructions Please follow the steps in this instruction to methodically reset the refrigerator filter and to begin using the filter in normal circumstances.
After your refrigerator’s indicator light begins to flicker, you should follow the steps outlined below.
In most cases, the indication or notification system is mounted on the refrigerator’s front door or on the side of the refrigerator.
Check to see whether it has an indicator that it needs to be replaced, such as a red light flashing consistently and emitting an alarm sound.
Step 1: Locate the previous filter.
It is often positioned at the bottom layer of the refrigerator cabinet, within the cabinet’s interior.

Find the location and carefully study the instructions on the handle that are written on the door.
Turn the old filter tube in the direction that has been advised and gently remove it outside.
Step 2: Replace the existing filter.
Now, remove the old filter and replace it with a new one, and then put a new filter in its place.
Check to see that you have purchased the correct model of filter for your refrigerator.
Insert the filter into the filter compartment and spin the lock to secure the filter in place.

Step 3: Reset the button’s settings.When you have finished with the filter replacement operation, proceed to the front entrance of the filter.Locate the button that says ″Reset filter option.″ Please push and hold the button for a few seconds after pressing it carefully.It is normal for the indicator to return to zero after three seconds.Please continue to hold the button down until the notification light goes out and your filter indicates that the reset has been completed.Step 4: Fill the container with one gallon of water.

Fill the reservoir with one gallon of water and turn on the machine to let the water to filter itself.Please do not drink this water; instead, pour it into the plant.The infection would have been contained in the first few drinks.Drinking water that has been poisoned might result in significant health consequences.

As a result, refrain from consuming it and instead wait for the water to become clean.You have now completed the process of resetting the water filter in your Samsung refrigerator.The water filter will last approximately six months after it has been replaced.If the water quality in your area is poor, certain filters may be quickly depleted and need to be replaced.Do not avoid alarm noises at any costs.

Hard water has a high concentration of minerals and other compounds that become stuck in the filter, causing clogging inside the membrane.
Once the blockage has grown to a significant size, the water filter will no longer be able to flow the water through it.
As a result, you will not have enough filtered water to go around.
In addition, it alters the flavor of water and causes water to smell foul after a while.
If you are experiencing problems with the water in your refrigerator, it is time to replace the old water filter with a new one and reset the refrigerator water filter to activate.

Do not avoid alarm noises at any costs.It is possible that the refrigerator has identified a problem with the filter.If you just press the button again without changing the filter, there is a chance that the filter will begin to send polluted water through it again.It is not advisable to consume contaminated water.It will have a negative influence on the wellness of your body.According on the Samsung refrigerator model you have at home, some of the processes may be somewhat different from those outlined here.

If necessary, consult the instructions.Reset options are available on all Samsung refrigerators through a single button press.Some may require you to complete extra steps before you may reset the button.Most of the time, though, everything is the same and functions completely great.

How to process Samsung refrigerator filter reset rf28r7351sr?

The Samsung refrigerator filter has an automated mechanism that allows consumers to reset the system with a single touch of a button on the side of the refrigerator.
The reset button may be found on the refrigerator’s front panel, with the other settings, near the ice maker.
It signifies that the filter has been reset, and you will be able to begin using the filter once more after clicking on it.
The notice will be turned off if you locate and hold down the reset button for three consecutive seconds.
The reset procedure has now been completed, and the notification has been restored to regular operation.

How to proceed to Samsung refrigerator filter reset rf23j9011sr?

The filter indication light on the Samsung refrigerator will turn orange when the filter has reached the end of its useful life.
Most of the time, the orange light means that your filter is about to expire shortly.
After five months or 450 gallons of filtering, the light changes to an orange color.
The color red is the ultimate indication that it is time to change the filtering media.
If you continue to use the filter after the refrigerator’s red light has flashed, the water will be detrimental to your health and should be avoided.

The refrigerator’s light indication is either green or blue, depending on the model number.
On the front of the refrigerator, you’ll see a button that says ″reset.″ Please push and hold the button for a few seconds until the lights turn green.

How to conduct a Samsung refrigerator filter reset rf28k9070sr?

When the filter begins to display a message on a screen suggesting that a reset is required, it is important to replace the filter completely in order to maintain your refrigerator operating properly.
For the best results, please push and hold the button located on the front screen of the refrigerator for a few seconds, as stated on the display.
Soon, your refrigerator’s filter will be reset, and you will be able to begin drinking the filtered water it has produced.

How to perform Samsung refrigerator filter reset rf28r7201sr?

To begin, obtain a replacement filter depending on the model number. Locate the spot where the filter is installed, gently turn the lock mechanism to unlock the filter, and then remove the filter from the system. Now, replace the old filter with the new filter and re-set the indication to the previous setting. You have completed the filter reset process.

What is needed for Samsung refrigerator filter reset rf22k9381sr?

It is simple to replace the filter with a few simple steps.
Navigate to the filter settings and delete the previous filter before replacing it with the newly created one.
The new filter will be ready to be reset after it has been installed.
Locate the display in front of the refrigerator at this point.
On the screen, you’ll see a button that says ″auto-reset option.″ Find the button and hold it down for a few seconds.

It will be reset, and you will be able to use the filter to drink pure water once more after that.

Ways to Samsung refrigerator filter reset rf28k9380sr/aa?

You will be prompted to reset the Samsung refrigerator after about six months.
To determine the state of the filter, look at the water indicator.
If you receive a message that the filter has to be reset, download the new filter and replace it with an existing one.
Locate the reset button and push and hold it for a few seconds—for a short period of time after you have secured the new filter in place.
The filter will be ready to use at this point.

Why do you need to perform a Samsung refrigerator filter reset rf28r7351sg?

It would be preferable if you had a filter model that was appropriate for the situation. Remove the old filter from the refrigerator and replace it with the new one. The technique for resetting is straightforward. After you have finished replacing the filter, go to the settings menu and select the reset option. The filter will then be ready to be used.

How do you reset a Samsung filter indicator?

Locate the multi-functional button on the refrigerator’s control panel. Keep pressing the button for a few seconds until the red light goes off. After that, the filter will be reset, and you will be able to begin using the Samsung filter water immediately after that.

What to do when you see a Samsung refrigerator filter reset the light?

The notice serves as a signal that the Samsung filter has been reset. When you see the light, it is time to turn off the filter and turn it back on. After changing the filter, press and hold the refrigerator filter reset button for 3 seconds after replacing the filter. Once this is done, the water filter can once again be used. Resetting the filter is simple.

How many times can you reset the refrigerator filter?

The majority of refrigerator filters are designed to last for six months or more.
Some filters, on the other hand, may lose their effectiveness prematurely if they are subjected to an excessive amount of hard water passing through them.
As a result, the filter would need to be replaced sooner rather than later.
Choose a replacement water based on the taste and smell of the water.
In most cases, an indicator will also display a notification that the filter needs to be replaced.

In order to avoid unpleasant water taste, follow the instructions and get your filter replaced and reset as soon as possible.

How do you reset a refrigerator after changing the water filter?

Modern refrigerator water filters are fitted with a simple reset mechanism that is simple to use. Press the notification button that reads ″Reset the water filter″ after you have replaced the water filter with a new one once you have done so. The water filter will be reset in three seconds, and you will be able to use the filter once more after that time.

What to do when you cannot reset the refrigerator water filter indicator light?

It becomes a problem if the refrigerator’s water filter indication is not working properly.
If the indication is still flashing, press and hold the filter reset button for 3 seconds, then release it after the notice has stopped blinking.
It is possible that the surgery will not be successful in some instances.
Test whether the system is unlocked using the ice maker reset procedure.
Press and hold the ice maker’s reset button for a few seconds, then release it when the notice indicates that it has been reset.

Both of the indicators may have been reset by now, and you will be able to utilize the Samsung water filter in ordinary condition once more in the future.
If the problem consists, it suggests that the reset mechanism of a filter has failed and has to be replaced.
It is possible that you may be required to do the repair.
In such case, contact the support center and request that a specialist reset the Samsung filter.

How To Reset The Filter Light On Your Samsung Refrigerator

The majority of Samsung refrigerators are equipped with filter light indications, which alert the user when the water filter needs to be changed.
It also implies that after replacing the filter in the Samsung refrigerator, you will need to reset the filter light in the appliance.
But why is this the case?
Generally speaking, the maximum number of months that a water filter may be used is six.
However, depending on the type of water that passes through the waterline, it may be necessary to replace the waterline.

Consider that if the water is hard in your area, you may need to replace the filter within 3 to 4 months of installing it.
You will not be able to determine that your filter needs to be replaced until you notice a difference in flavor, which you would not notice without the filter light.

How Samsung Water Filter Indicator Works

When the water filter is still in good working order, the Samsung water filter displays a blue or green hue, depending on the type you have installed.
When it has been in the water for 5 months or 450 gallons, the color turns to orange or light pink.
This color shift is frequently an indicator that it is time to replace the water filtration system.
Your water filter indicator will turn red after 6 months or 500 gallons of water have been used.
When you notice this red light, it’s time to replace the water filter.

The longer you wait, the more likely it is that you may see particles in your drinking water.
However, you will need to replace your water filter sooner than 6 months if you live in a region where there is an excessive amount of limescale in the water.
Amazon has the 2-Pack Samsung DA29-00020B Refrigerator Water Filter available for purchase.
Click here to view and purchase the filter.

How to Reset the Filter Light on Your Samsung Refrigerator

The following are some methods for resetting the filter light on your Samsung refrigerator: Option 1: Press and hold the Alarm button on your Samsung refrigerator for 3 to 5 seconds until the alarm sounds.
Option 2: Press and hold the Ice Type/Water button for 3 to 5 seconds to activate the ice type/water feature.
The third option is to press and hold the Ice/Water button for 3 to 5 seconds.
Option 4: Press and hold down both the Ice Type and Child lock buttons for 3 to 5 seconds to unlock the device.
The fifth option is to press and hold the Crushed Ice button for three to five seconds.

Following any of the aforementioned actions should result in the filter light being reset and reverted to its factory settings.
That’s all there is to it when it comes to understanding how to reset the filter light on your refrigerator.
To understand more about filter light reset, check out this blog article from Samsung, which includes step-by-step directions for resetting filter lights on the Samsung RF4289 and RSG309 refrigerators, among other things.
Also, if the present water filter in your Samsung refrigerator has exceeded its filtering capacity or has been in use for an extended period of time, you may want to learn more about how to replace the water filter.
To learn more about how to reset your Samsung refrigerator, see this article: How To Reset Your Samsung Refrigerator for a comprehensive reference on the subject.
Alternatively, you may watch the video below to find out more information:

Video: How To Reset Filter Light On Samsung Refrigerator

Take a look at these other in-depth articles and reviews…
How Much Propane Does a Recreational Vehicle Refrigerator Consume?
Detailed Review of the ARB 12V Weatherproof Fridge/Freezer with Electronic Lock Review of the Kalamera 18-Bottle Wine Cooler in Detailed What to Do When Transporting a Refrigerator When it comes to the price of a Sub-Zero refrigerator, it is hard to beat the competition.
A Comprehensive Review of the Whynter 34-Bottle Wine Cooler

Get Instant Help — Ask An Experienced Verified Appliance Technician

Do you require professional assistance? If you need to speak with a verified appliance technician right now, click here to use the chat box on this page. There is no need for costly in-home service visits. There are no appointments. There is no waiting.

How to Repair a Clogged Defrost Drain Tube

If you do not have a copy of your owner’s manual, you may obtain one by visiting the manufacturer’s website or contacting their customer service department.
Attempt to arrange your refrigerator so that it is slightly tilted up and back against the wall when you are putting it back in its original position.
This will aid in the prevention of jams and blockages by ensuring that the water in the defrost drip pan flows smoothly down into the freezer drain hole during the freezing process.
Credit for the image goes to Jupiterimages/Photos.com/Getty Images Clogged defrost drain tubes might be indicated by the presence of water under your refrigerator’s fruit and vegetable bin, frozen ice in the bottom of your freezer, or standing water underneath your refrigerator.
A self-defrosting refrigerator uses this tube to transport the water created during a defrost cycle out of the refrigerator and into a pan at the bottom of the refrigerator where it is evaporatively evaporated.

When the tube becomes blocked, it might cause leaks to appear in the system.
In most cases, if a homeowner knows the brand and model of their refrigerator, as well as a few basic pieces of equipment, they can fix a blocked defrost drain tube without the need for expert assistance.

Step 1

Removing your refrigerator from the power socket and sliding it a few feet away from the wall will allow you to have access to the rear of the appliance if necessary. Take frozen foods out of the freezer and store them in a cooler to keep them fresh.

Step 2

Consult your refrigerator’s owner’s handbook to learn where the defrost drain tube is located within the unit. It is possible that this tube will be positioned behind the fruit and vegetable bins, at the rear of the refrigerator, or running down the bottom of the freezer section, depending on the brand and type of refrigerator you own.

Step 3

Check the drain for ice or other debris (such as food particles) that may be obstructing it. To melt any ice, use a low-temperature hair drier or a heat gun on a low setting.

Step 4

Fill the drain tube with a screwdriver or a small length of 14-inch flexible tubing and insert it into the drain tube to clear out any residual blockages and/or to force the clog into the drip pan.

Step 5

Using a turkey baster mixed with a solution of hot water and bleach, thoroughly clean the drain.

Step 6

Remove and empty the drip pan (found beneath the refrigerator), since this pan is frequently filled with water as a result of a clogged drain tube, which can cause it to overflow and cause damage to your flooring. Remove and empty the drip pan (placed beneath the refrigerator).

Where is the filter located on my Samsung refrigerator?

Asked in the following category: General The most recent update was made on May 28th, 2020.
Located on the fresh food side of the bottom drawer on the right-hand side of a Samsung side-by-side refrigerator, the water filter removes contaminants from the water.
The great majority of refrigerator filters may be found in one of two places: in the grille at the bottom of the refrigerator or in the rear upper-right corner of your refrigerator, depending on the model.
In either position, you’ll find a knob or a button that allows you to effortlessly release the filter and remove it from the system.
Also, is it possible to use my Samsung refrigerator without the water filter installed?

The majority of Samsung water and ice dispensers will function well even if an AquaPure water filter is not fitted.
Because the water filter housings are constructed as rotating valves, when there is no filter in place or when the filter is not secured, water can circumvent the filter and flow through to the next stage.
What is the proper way to reset the filter on a Samsung 4 door refrigerator in light of this?
Navigate to and choose Fridge Manager from the Home screen, then pick Fridge Settings from the Fridge Manager menu.
To reset the filter, select Reset > Proceed from the filter icon.
The water filter light on your refrigerator will be reset in a matter of seconds.

Note: After selecting the water filter symbol, you will have the option to purchase a Samsung water filter by selecting Buy Filter.
Is it necessary to switch off the water when changing the refrigerator filter?
Probably the most advantageous feature of most refrigerator water filters currently in use is that, after the filter has been removed, the water supply is immediately switched off.
This eliminates the need for you to search for a shutoff valve to switch off the water supply to the refrigerator.

Where is the water filter on a Samsung side by side refrigerator?

Located on the fresh food side of the bottom drawer on the right-hand side of a Samsung side-by-side refrigerator, the water filter removes contaminants from the water. The quickest and most straightforward method of determining the appropriate filter for your refrigerator is as follows:

Do not forget to remove the filter from your refrigerator (don’t worry, the water will cut off automatically)
Look for the component number that is written on the filter.
Fill up the search box in the top right corner with your information and press Enter

Second, do you have to cut off the water in order to replace the refrigerator filter?
Probably the most advantageous feature of most refrigerator water filters currently in use is that, after the filter has been removed, the water supply is immediately switched off.
This eliminates the need for you to search for a shutoff valve to switch off the water supply to the refrigerator.
Also, what kind of water filter does my Samsung refrigerator employ?
It is utilized in some Samsung French door and side-by-side refrigerators that provide access to the water filter through a door in the refrigerator.

It is possible to use the Samsung DA29-00020B water filter in the system for Model: DA97-08006A-B.
This filter is compatible with the following models: RS267, RFS265, RS263, RS261, RFG293, RF4287.
Is it possible to use my Samsung refrigerator without using the water filter?
The majority of Samsung water and ice dispensers will function well even if an AquaPure water filter is not fitted.
Because the water filter housings are constructed as rotating valves, when there is no filter in place or when the filter is not secured, water can circumvent the filter and flow through to the next stage.

Refrigerator Water Filters & Replacements

Make certain that your family has access to pure, clean, and delicious water. With a genuine Samsung water filter, you can eliminate toxins in your household.

Our filters are NSF* certified to remove many contaminants.

You should be aware that Samsung filters out herbicides, pesticides, lead, mercury, asbestos, and even drugs such as ibuprofen, carbamazepine, and a whole host of other difficult-to-pronounce compounds. in order for you to be able to rest (and drink easy).

Why your filter choice matters

Samsung filters out up to 80 percent more pollutants than other major private label products, according to the manufacturer. Not only will you be able to enjoy fresher and cleaner water, but choosing a Samsung filter will also ensure that you will not have to struggle with water leakage and other difficulties that might occur when using a different brand of filter.

Easy to install. Easy to use.

The last thing you want is to have to deal with a difficult water filter installation.
Our water filters are specifically designed for Samsung refrigerators, making them simple to install.
– Samsung customer’s artwork Genuine Samsung water filters are available at a discounted rate of $15 per filter for subscribers.
A 6-month auto renewal guarantees that you receive the best fit every time you purchase.
You may make changes to your subscription from your account at any time.

Subscribe and save

Now is the time to subscribe to save 30% a year on water filters and to receive an automated replacement every 6 months—as well as free Samsung assistance throughout your 1-year warranty period.

Support topics

How do I replace my Samsung water filter?

DISCOVER MORE 1 A non-genuine Samsung filter will void the warranty of Samsung and will not be covered under the company’s policy. *NSF 42, 53, and 401 certified