How To Reset Samsung Water Filter

Replace the water filter in your Samsung refrigerator

There are three different types of Samsung water filters, so you’ll want to be sure you’re getting the right one for your refrigerator before purchasing one. Replacement filters are available for purchase on ouraccessories page if needed. To begin, identify the filter in your refrigerator’s model. You should refer to your user handbook if you are unclear about the location. Then, on the filter itself, look for the model number printed on it. This will inform you of which of the following filter types you will require for your application.

If you’re not sure whether or not you need to replace the filter, look for an indication light on your refrigerator.

If you are about to replace the filter, the light will become purple to indicate that it is time.

You should alter the filter as soon as possible at this point.

  1. After turning off the water, identify the filter and clean it as needed. If you are unclear of where it is, please refer to your user handbook for assistance. Once you have unlocked the old water filter, remove its lid and swivel it counterclockwise to reinstall it. Afterwards, just pull it straight out of the filter housing to remove it. Prior to placing the new filter in the system, remove the protective cover from the top of the existing filter. Afterwards, insert it directly into the filter housing and turn it counter-clockwise
  2. Examine to ensure that the lock symbol corresponds to the indication line.

After turning off the water, locate the filter and clean it as necessary. You should reference your user manual if you are unclear of where it is located. Firstly, remove the water filter cover and then spin the old filter counterclockwise to unlock it. Afterwards, just pull it straight out of the filter housing to free it. Prior to placing the new filter in the system, remove the protective cover from the top of the old one. Afterwards, insert it directly into the filter housing and turn it counter-clockwise.

  1. After turning off the water, identify the filter and clean it as needed. If you are unclear of where it is, please refer to your user handbook for assistance. Using a left-handed twist, you can remove the old filter. This will allow you to access it
  2. Afterwards, pull it downward to remove it from the filter housing. The replacement filter should be inserted by pushing it up into the filter housing and then turning it to the right. Check to ensure that the notch at the top of the filter corresponds to the arrow on the filter’s housing. Replace your filter and then flush it thoroughly with a few liters of water to wash out any contaminants or air that may have gotten into it. Then, make sure that the water filter light on your refrigerator is turned back on. Please refer to the following sections for further information.

After turning off the water, locate the filter and clean it as necessary. You should reference your user manual if you are unclear of where it is located. Using a left-hand twist, you may remove the old filter. Upon doing so, it will be unlocked. Afterwards, pull it down to release it from the filter housing. Using your fingers, press the new filter upwards and then to the right; this will ensure that it is properly installed. To avoid clogging the filter, make sure it has a notch at the top that matches the arrow on the housing.

Then, make sure that the water filter light on your refrigerator is turned off and back on again.

  1. If theFilter Resetbutton is accessible on the control panel, locate it and press it. In some cases, it is a secondary function of another button on the panel
  2. Once identified, press and hold the proper button for 3 seconds until the light turns out
  3. The filter symbol will either turn off or return to its usual color when the light is turned off. This restarts the timer for the next six months.

Please keep in mind that some models may require you to press two buttons at the same time in order to reset the light.

Touch screen models will instead make use of on-screen menus. Consult your refrigerator’s owner’s handbook for detailed operating instructions. The water filter light and timer on your Family Hub refrigerator may be reset by following the instructions outlined below.

  1. Start by selecting Apps from the Home screen, followed by Fridge Manager
  2. Then choose Water Filter from the Home screen, followed by Reset and then Proceed. The filter light and timer will be reset as a result of this. If you require a Samsung water filter, you may purchase one by pressing the Buy Filter button after tapping the water filter symbol.

On models RF4289 and RSG309, you may also reset the filter light by pressing the reset button.

  1. Then, at the bottom of the screen, navigate to and pick theSettingsicon, and then tapWater Filter to begin. As soon as the Water Filter menu appears, press Next three times in the lower right corner of the screen until you reach page 4/4 of the Water Filter menu. Hold the object with your fingertips. Remove and reinstall the water filter until it changes its status, which may be done in the middle of the display. After the message “Filter Replaced” appears and disappears from the screen, tapSave in the lower right corner of the screen.

In order to define what is filtered by a water filter, the National Sanitation Foundation (NSF) and the American National Standards Institute (ANSI) have developed a variety of standards. Samsung’s water filters are Carbon Filters that meet the requirements of the NSF/ANSI 42, NSF/ANSI 53, and NSF/ANSI 401 standards, among other requirements. NSF/ANSI 42 is a standard for food safety and sanitation.

  • Filtered to decrease the presence of aesthetically objectionable contaminants like as chlorine and taste/odor

Aesthetic impurities such as chlorine and taste/odor are reduced with filtration.

  • Certified to decrease a pollutant that has a negative impact on health. The following substances have been identified as having negative health effects by the United States Environmental Protection Agency (EPA) and Health Canada: Asbestos, Atrazine, Benzene, 2, 4-D, Carbofuran, Chlorbenzene, Cyst (99.99 percent), Endrin, Ethylbenzene, Lead, Lindane, Mercury, O-Dichlorobenzene, P-Dichlorobenzene, Tetrachloroethylene, Toxaphene

NSF/ANSI 401 is a standard for food safety and sanitation.

  • It has been proven to lower one or more of the 15 emerging pollutants in drinking water by at least 50%. Pharmaceuticals and chemicals that are not yet controlled by the Environmental Protection Agency or Health Canada include: atenolol, bisphenol A, carbamazepine, DEET, estrone, linduron, nonylphenol, phenytoin, trimethoprim, and trimethoprim sodium.

Check out our troubleshooting guide for assistance if you are having difficulties installing the water filter in your refrigerator.

How to Reset Filter Light on Samsung Fridge [2022]? (Solved)

If you are experiencing difficulty installing the water filter in your refrigerator, please refer to ourtroubleshooting guide for further assistance.

The Operation of the Samsung Water Filter Indicator

In excellent functioning condition, the Samsung water filter will exhibit a blue or green color, depending on the type that you have installed on your system. The hue changes to orange or light pink after 5 months or 450 gallons of water has been added. This hue shift is typically a sign that it is time to upgrade the water filtration system in your home or business. After 6 months or 500 gallons of water have been utilized, the water filter indicator will turn red on your water filter. When you see this red light, it indicates that it is time to replace the water filter.

Furthermore, if you reside in a place where there is an excessive amount of limescale in the water supply, you will need to change your water filter more frequently than every six months.

Indicator for the presence of a water filter

After five months or 450 gallons of water, the water filter indicator light must first become orange, and then red after six months or 500 gallons of water. After turning orange, the light must next turn red. The hue of the light is determined on the model that you have purchased. It might be either green or blue in color. Identifying the multi-function button or buttons on your display that control the water filter indicator is required in order to restore the water filter indication to its default state.

Exemplifications of Various Models

Please keep in mind that the models shown in the images below are merely a few examples of the many different designs available. Take a look at the digital display panel on your refrigerator and look for traits that are similar to these.

What you need to know about how to reset the filter light on a Samsung refrigerator (steps to follow on different models)

Holding down the FILTER RESETbutton for about two seconds is required while operating a Samsung refrigerator to turn off the red filter symbol located on the door of the refrigerator. Consult your refrigerator’s owner’s handbook if you are unable to locate the FILTER RESET button, which is usually placed on the dispenser controls (on the front of your refrigerator). Other versions can only be operated by pressing and holding down either the “WATER FILTER” button or the “ICE/WATER” button for three seconds at a time.

To assist you in getting back on track, we’ve discussed the right Samsung refrigerator water filter reset strategy for each model in the following sections, as the Samsung refrigerator water filter reset technique varies depending on model (typical steps).

Samsung refrigerator model RF28K9070SR has a filter reset.

Holding down the FILTER RESETbutton for about two seconds is required while operating a Samsung refrigerator to turn off the red filter symbol located on the door of the appliance. If you are unable to locate the FILTER RESET button on your refrigerator – which is usually placed on the dispenser controls – go to your owner’s handbook for guidance (on the front of your refrigerator). You must press and hold down either the “WATER FILTER” button or the “ICE/WATER” button for three seconds in order to use the other models.

Resetting the filter light on a Samsung model RF23J9011SG/AA – instructions

It is necessary to hold down the CRUSHED/HOLD button on your RF23J9011SG/AA for three seconds in order to reset the water filter light on your device. Instead of remaining on, the color of its indicator should go from red to OFF instead of remaining on. The following are the steps to follow in order to reset the water filter on a Samsung refrigerator with a French door style. There are Samsung refrigerators available, such as the Samsung refrigerator RF260/BEAESR/AA. Samsung refrigerators are also available.

You should bear in mind that, in order to activate the internal controls on devices with internal controls, you must simultaneously press and hold the buttons FRIDGE+POWER COOL for a total of three seconds.

Model DA29-00003G of the Samsung refrigerator has a filter reset light.

The ALARM/HOLD button must be held down for three seconds while the replacement warning light is turned off to reset it.

Model number RF24R7201SR/AA of the Samsung refrigerator.

It is recommended that you push and hold the FILTER RESET button (for 3 seconds) if you have just replaced the filter in your Samsung RF24R7201SR/AA refrigerator to turn off the reset signal on the refrigerator.

Samsung refrigerator water filter reset RF28K9070SR/AA

In order to clear the water filter message, the CRUSHED ICE button must be pushed and held down for three seconds.

RF23J9011SR is the Samsung refrigerator filter reset code.

The water filter alarm on a Samsung refrigerator with model number RF23J9011SR may be reset by pressing and holding the button “CRUSHED/HOLD” for three seconds.

RF263BEAESR is the Samsung refrigerator filter reset code.

If your RF263BEAESRSSamsung refrigerator water filter does not reset automatically, the following process should be followed: Press and hold the ICE TYPE/WATER button on the controller for three seconds to activate it.

Instructions for resetting the Samsung RF28R7351SG water filter (applies for most 4 doors Samsung refrigerators)

In order to reset the warning signal, the CRUSHED LIGHT INDICATOR button must be pushed and held down for three seconds.

If the reset light signal does not turn off, there are some other options to attempt.

Briefly said, if replacing the filter does not result in the red light going off, you can also try the following steps:

  • Check to determine whether any of the buttons are currently locked
  • Please double-check that the buttons are actually “unlocked,” or else the Samsung refrigerator filter reset process will not work properly.
See also:  How To Check Hot Water Heater Elements?

Alternatively, you may refer to your guide book once again for the procedures on how to unlock the controls if you desire them. It is conceivable that the filter alert light is still flashing because the freshly fitted filter was not put in the right location.

Open the door, take a look at the fitting, and check sure everything is in its proper place.

  • It is conceivable that the filter alert light is still flashing because the freshly fitted filter was not put in the appropriate location. Examine the fitting and make certain that it is perfectly in place before closing the door.

OUR FINAL THOUGHTS

You should now be able to comprehend how to reset the filter light on a Samsung refrigerator, which we hope has been helpful (and probably you have already gotten rid of the warning). Just one more issue to mention: the majority of Samsung refrigerator models are equipped with a “LOCK” button, which is used to lock the settings, and it is commonly this button that is faulty when the Samsung fridge water filter light does not dim when you attempt to switch it off. For the water filter light to be correctly reset, it will be required for you to unlock the controls; thus, try holding down the flashing LOCK button for 3 seconds and then retrying the procedure.

If the steps indicated above do not work, consult your guidebook to determine the proper way.

FREQUENTLY ASK QUESTIONS

Pressing and holding down either of the buttons on the side of the refrigerator for three seconds each is the most common method of resetting the Samsung refrigerator water filter. The FILTER RESET button may be found on the right-hand side of the screen, at the bottom. It is possible to use either the “WATER FILTER” button or the “ICE/WATER” button. If, on the other hand, your Samsung refrigerator filter light does not reset, then check to see if the buttons have been locked and then unlock them before attempting to reset the light again.

What is the procedure for turning off the filter light on my Samsung?

Identifying the multi-function button or buttons on your display that control the water filter indicator is important in order to restore the water filter indication to its default state. Once you have done this, press and hold the button(s) for a few seconds until the light turns green.

What is causing my Samsung refrigerator’s filter light to not reset?

If the light does not turn off after many efforts, call a professional to have the filtration system repaired or serviced. It should be possible to restore the indicator light to its previous blue color and functionality after the filter has been changed. Unless you manually reset the red filter indication on your Samsung refrigerator, it will remain illuminated at all times. Hello, my name is Khelly. Count on me to be your go-to tech specialist for all of your Samsung Products and Information need.

Allow me to assist you with that!?

Samsung Fridge Filters: Easy-Guide to Replacing, Resetting and Changing.

Samsung is one of the most successful corporations in the world today. The South Korean technology corporation, which has its headquarters in Seoul’s Samsung Town, was initially started as a trade company, but it entered the electronics sector in the 1970s after expanding into other markets. Samsung declared in 2015 that it intended to surpass General Electric as the world’s largest appliance manufacturer. To achieve this, as you might expect, the company had to outperform numerous well-known global corporations, like Whirlpool, Bosch, and Electrolux, among others.

  • Samsung’s collection of home appliances will feature refrigerators that supplied sparkling as well as still, filtered drinking water, making them far more sophisticated than anything else that other household manufacturers were manufacturing at the time.
  • Samsung is unquestionably one of the world’s biggest appliance manufacturers, despite the fact that they are not exactly at the top of the scoreboard that has just been established.
  • One of the reasons water tastes so much better when it comes out of a Samsung refrigerator is due to the superior filtering system that the refrigerator has installed.
  • It is critical that you update your Samsung water filter on a regular basis if you want to continue drinking wonderful water at home.
  • This will result in terrible tasting drinks that you will be embarrassed to give your friends and family.

We’ve put together a simple tutorial on everything you need to know about replacing your Samsung fridge filter at home so that you can continue to be proud of your great beers, clean water, and crystal-clear ice.

1. How to replace RSG5UCRS Samsung Fridge Filter:

When it comes to replacing your RSG5UCRS Samsung Fridge Filter, we have some good news for you: it’s more simpler than you would imagine. When the filter indicator light becomes orange or pink, it indicates that a new filter should be purchased. When the filter indicator becomes red, it is time to replace it. If six months have passed and the indication light has not gone red, we nonetheless recommend that you replace the filter in order to preserve the excellent quality of your drinking water at all times.

Only internal filters should be replaced according to the procedures provided below.

  1. The old water filter may be removed by turning it 45 degrees to the left to open it
  2. At this point, gently remove the old water filter and toss it away
  3. The water will stop off automatically at this time. Insert the new water filter into the available area and rotate it 45 degrees to the right
  4. If the padlock symbol on the filter corresponds to the sign on the filter, the filter is in the proper position. Immediately following the installation of the new filter, push the water filter reset button for three seconds to reset the light indicator.

Suggestions for improvement In the event that you are having difficulty removing the water filter, it is possible that there is excessive water pressure behind the filter. Remove the top two refrigerator shelves and use a stronger pull on the filter to get it out. If you are unable to squeeze the new filter into the available area, turn off the water supply valve and dispense a little amount of water. As a result, the pressure will be reduced, making it easier to install the new filter. All of the steps that follow are for external filters only.

Instructions on how to change an internal filter may be found further up the page.

  1. Immediately turn off the water supply
  2. Remove the old cartridge from the system and dispose of it properly
  3. The water filter should be positioned such that it flows in the direction of the refrigerator
  4. The inlet and exit tubing should be connected to the proper end of the filter by firmly inserting the tube all the way into the filter until it is snugly shut
  5. Check to see that the tube is square and free of scratches – you may trim it if required. The filter clip should be installed according to the directions in the installation manual. Make sure there are no leaks in the filter by turning on the water. Re-do the installation processes and check again whether there are any leaks. If the leaks continue, remove the filter and contact customer service. Allow water to circulate through the filter for five minutes in order to clean the entire system.

2.How to Replace a DA29-00003F Water Filter

The DA29-00003F water filter is a replacement for the DA29-00003G, DA29-00003B, and DA29-00003A water filters, among others. In no way is it a substitute for the superior DA29-00003G filter, nor is it compatible with that more sophisticated filter. The replacement of an internalDA29-00003F water filter is described in the following instructions.

  1. The old water filter may be removed by turning it 45 degrees to the left to open it
  2. Gently take it out and throw it away — this will cause the water to cut off automatically
  3. To install the replacement water filter, insert it and rotate it 45 degrees to the right to secure it in place
  4. If the padlock sign on the water filter corresponds to the symbol on the water filter, you have completed the task successfully. To reset the water filter indication, press and hold the water filter reset button for three seconds.

Suggestions for improvement In the event that you are having difficulty removing the water filter, it is possible that there is excessive water pressure behind the filter. Remove the top two refrigerator shelves and use a stronger pull on the filter to get it out. If you are unable to squeeze the new filter into the available area, turn off the water supply valve and dispense a little amount of water. As a result, the pressure will be reduced, making it easier to install the new filter.

3. How to Reset the Water Filter Indicator Light on a Samsung Fridge

In addition to the water filter, every Samsung refrigerator that has one features a water filter indicator that tells you when it’s time to replace the water cartridge. The filter should be replaced once every six months regardless of whether or not the light changes color. This will ensure that you continue to drink the high-quality water that you have come to like. If you don’t change your water filter on a regular basis, it won’t function properly. Instead of drinking great-tasting, clean water, you’ll be forced to drink strange-tasting water that may include unwelcome toxins.

Blue indicates that your water filter is performing properly.

Red:Your water filter has reached the end of its useful life and it is time to replace it with a new one.

By pushing and holding the “Alarm / Hold for 3 seconds to Reset Filter” button for three seconds, you may reset the indicator light.

If your model has an inside control panel, press and hold the “Power Cool” and “Fridge” buttons for three seconds at the same time. This will return the indicator light to its original blue state.

4. How to Replace a DA29-00003G Samsung Fridge Filter

Instructions for internal filters are provided in the next section. The Samsung DA29-00003G water filter is always installed from inside the device itself.

  1. To remove the old water filter, twist it a quarter turn to the left to free it
  2. Then lift it out. Gently remove the old water filter and throw it away
  3. This will cause the water to be switched off automatically. Insert the new water filter and rotate it by a quarter turn to the right until it is secure. If the padlock sign on the water filter corresponds to the symbol on the water filter, you have successfully installed it. The water filter indication should be reset after installation by pressing the water filter reset button for three seconds after completion.

Suggestions for improvement In the event that you are having difficulty removing the water filter, it is possible that there is excessive water pressure behind the filter. Remove the top two refrigerator shelves and use a stronger pull on the filter to get it out. If you are unable to squeeze the new filter into the available area, turn off the water supply valve and dispense a little amount of water. As a result, the pressure will be reduced, making it easier to install the new filter.

5. Why You Need to Change Your Fridge Filter Every 6 Months

Suggestions for further reading Having trouble removing the water filter? It might be due to a buildup of water pressure behind the filter that needs to be addressed. Remove the top two refrigerator shelves and use a stronger pull to get the filter out of the way. Closing the water supply valve and dispensing a small amount of water may be necessary if the new filter will not fit in the existing space Because of this, the pressure will be reduced, which will make it easier to install the new water filter.

How To Reset The Water Filter Indicator On a Samsung Fridge.

There are currently no goods available in this category. The Water Filter Light Can Be Reset On Page 1 of 2 The water filter indication light on your refrigerator is illuminated. Normally, the indication light has a bright blue color. The color of the indicator light changes every 6 months, or after about 400 gallons of water have passed through the dispenser. It will eventually turn purple or crimson. Remember that if the indication light on your dispenser changes but the ice maker or water pressure from the dispenser continues to function properly, you do not need to replace the filter.

See also:  Where Can I Dispose Of An Old Water Heater?

It is important to note that if the light is already off or blue, there is no need to reset the indicator light.

For instructions on how to reset the water filter indication light, see the procedures below: To reset your filter, look for the button on your display panel that has the words “Hold 3 sec for filter reset” printed on it.

It is the button in the middle of the control panel on the left side of the screen.

Resetting The Water Filter Indicator

Unless the ice production and/or water pressure are abnormal, and the indicator is illuminated, it is not necessary to replace the filter. Just bear in mind that when ice production and water pressure begin to deteriorate, it is necessary to replace the water filter. Perform the following steps to reset the water filter indication light: 1.

Find the Alarm button on the control panel and press it. It is the button in the middle of the control panel on the left side of the screen. 2. Press and hold the button for a few seconds until the indication light turns off (approximately 5 seconds).

Will the Water Dispenser on the French Door Refrigerator Work Without a Water Filter Installed?

As an Amazon associate, we receive a commission on any qualifying purchases made via our links. Using this post, you will learn how to reset the Samsung fridge water filter light, as well as the steps to take if the light continues to illuminate even after you have completed the Samsung fridge water filter replacement process. Keep in mind that the filter reset light will only activate when the filter needs to be replaced (otherwise, it will not be illuminated). Let’s get this party started:

How to reset the filter light on a Samsung refrigerator (steps to follow on different models)

When using a Samsung refrigerator, you must hold down the FILTER RESET button for about two seconds in order to turn off the red filter icon on the door. If you are unable to locate the FILTER RESET button on your refrigerator – which is often located on the dispenser controls – consult your owner’s handbook for assistance (on the front of your refrigerator). Other models, on the other hand, require you to press and hold down either the “WATER FILTER” button or the “ICE/WATER” button – for a total of three seconds.

Samsung fridge water filter reset – step by step instructions for specific Samsung fridge models

To reset the filter on your RF28K9070SR model, press and hold the ICE-MAKER button for about 3 seconds after turning it off. The filter indication will be reset as a result of this action.

Samsung model RF23J9011SG/AA filter light reset – directions

The CRUSHED/HOLD button on your RF23J9011SG/AA must be held down for three seconds in order to reset the water filter light. The color of its indicator should transition from red to OFF instead of staying on.

Samsung fridge water filter reset – steps for French door style Samsung refrigerators including Samsung refrigerator RF260/BEAESR/AA

After installing a new water filter, press and hold down the ALARM/HOLD option for three seconds to turn off the red warning light that has shown. Please keep in mind that, for devices with internal controls, you must push and hold down the buttons FRIDGE+POWER COOL (at the same time) for a total of three seconds.

Samsung refrigerator filter reset light -DA29-00003G model

To reset a replacement warning light, press and hold the ALARM/HOLD button for three seconds while the light is off.

Samsung refrigerator model RF24R7201SR/AA

If you have recently replaced the filter in your Samsung RF24R7201SR/AA refrigerator, pushing and holding the FILTER RESET button (for 3 seconds) should turn off the reset signal on the refrigerator.

Samsung refrigerator filter reset RF28K9070SR/ Samsung refrigerator water filter reset RF28K9070SR/AA

The CRUSHED ICE button must be pressed and held down for three seconds in order to clear the water filter message.

Samsung refrigerator filter reset RF23J9011SR

Using the Samsung refrigerator RF23J9011SR model, press and hold the button “CRUSHED/HOLD” for three seconds to reset the water filter alarm on your Samsung refrigerator.

Samsung refrigerator filter reset RF263BEAESR

The following procedure should be followed if your RF263BEAESR Samsung refrigerator water filter does not reset automatically: For three seconds, press and hold the ICE TYPE/WATER button on the controller.

Samsung RF28R7351SG water filter reset directions (applies for most 4 door Samsung refrigerators)

The following steps should be followed if your RF263BEAESR Samsung refrigerator water filter does not reset automatically: To use the ice type/water button, press and hold it down for three seconds.

Samsung SRF719DLS filter light reset

Once again, this is a model in which pressing the CRUSHED/HOLD button for three seconds will turn off the water filter indicator light.

Samsung refrigerator filter reset RF28R7201SR

The following steps will show you how to reset the filter on your Samsung refrigerator RF28R7201SR: Hold down the ICEMAKER symbol for three seconds after selecting it. The filter reminder light will be turned off as a result of this action.

Samsung RF22K9381SR filter reset

To reset the filter on your Samsung refrigerator RF28R7201SR, follow the steps below: Take a long, deep breath and press the ICEMAKER symbol for three seconds to activate it. The filter reminder light will be turned off as a result of this procedure.

What to do if the filter warning light is still red (even after the installation of a new water filter and trying the outlined procedure)

The following is a list of other things you may do if your Samsung refrigerator filter light does not reset after you follow the procedures above (soon after you have installed a new filter).

Other steps worth trying if reset light indicator won’t go out

In a nutshell, if replacing a new filter does not result in the red light turning off, you can also attempt the following:

· Check if the buttons are locked

Make certain that the buttons are truly “unlocked,” or else the Samsung refrigerator filter reset operation will not function properly. For the methods on how to unlock the controls, you can refer to your handbook book once again if you require them.

· Check the filter seating

It is possible that the filter alert light is still blinking because the freshly fitted filter was not properly placed. Open the door, look at the fitting, and make sure it’s exactly in place.

· Check if the correct filter was installed

If you did not use a legitimate product, the light indication may not go away, and you may need to switch out the new filter to get it to work again (as a last resort).

How to reset the filter light on a Samsung refrigerator– Frequently asked questions (FAQs)

The majority of the time, the technique to do a Samsung refrigerator water filter reset consists of pushing and holding down either of these buttons for three seconds each.

  • To do a Samsung refrigerator water filter reset, the majority of the time, pushing and holding either of these buttons for 3 seconds is all that’s required.

However, if the filter light on your Samsung refrigerator does not reset, then check to see if the buttons have been locked and then unlock them before retrying.

Final words

We hope you have gained a better understanding of how to reset the filter light on a Samsung refrigerator (and probably you have already gotten rid of the warning). Final point: Most Samsung refrigerator models are equipped with a “LOCK” button, which is used to lock the controls, and it is frequently this button that is to fault when the water filter light on your Samsung refrigerator does not turn off when you try to turn it off. It will be necessary for you to unlock the controls in order for the water filter light to be correctly reset; thus, attempt to hold down the flashing LOCK button for 3 seconds and then restart the process.

AS WELL, READ: Samsung Twin Cooling Refrigerator Refrigerator Freezer Not Working.

The Red Filter Indicator on My Samsung Refrigerator Won’t Turn Off

If the light does not reset after many attempts, contact a professional to service the filtration system. The most likely cause of the problem is a short between the cables connecting the filter and the console. If you have a Samsung refrigerator, a filter indicator light will illuminate to alert you when it’s time to replace the water filter. The light begins in a blue hue, indicating that a new filter has been installed. When the filter has been in place for five months, the light turns purple.

Once you have replaced the filter with a new one, the indicator light should return to its original blue color and function properly. The red filter indication on your Samsung refrigerator will not turn off until you reset it manually.

Step 1

Ensure that the filter is properly placed by opening the refrigerator door and looking inside. This means that the filter should be completely contained within the housing located in the bottom right corner of the refrigerator. To remove the old filter, turn it 90 degrees counterclockwise and pull it out. Install the new one by rotating it 90 degrees clockwise once it has been removed. It does not matter if the filter is fully seated or not; the indicator will not identify a newly installed filter.

Step 2

If the red warning light on the control panel is still lighted, look for the “Child Lock” and “Ice Type” push buttons on the panel.

Step 3

Press and hold both buttons at the same time for three seconds to complete the task at hand. It is expected that the indicator light will be illuminated in a blue hue.

Family Hub Refrigerator

  • Change the temperature of the fridge
  • Change the temperature of the freezer
  • Change the temperature of your Flex Zone
  • Power cool and power freeze.
  • Installation
  • Navigating the Family Hub
  • Connecting to Wi-Fi
  • Setting the clock
  • Setting reminders and seeing the interior
  • Internet
  • Whiteboard
  • Photo album
  • TV mirroring and timer
  • Shopping list. Initial Set Up. Changing the volume
  • Changing the brightness
  • WaterIce Dispenser
  • Ice Making On/Off
  • Replacing and Resetting the Water Filter
  • Display Reset
  • Using Tempered Glass Shelves
  • Using Tempered Glass Shelves Taking out the ice bucket
  • Taking out the door bins
  • Taking out the drawers
  • Using a mobile device to view the contents of the refrigerator
  • Uploading photos from a mobile device

How To Reset The Filter Light On Your Samsung Refrigerator

The majority of Samsung refrigerators are equipped with filter light indications, which alert the user when the water filter needs to be changed. It also implies that after replacing the filter in the Samsung refrigerator, you will need to reset the filter light in the appliance. But why is this the case? Generally speaking, the maximum number of months that a water filter may be used is six. However, depending on the type of water that passes through the waterline, it may be necessary to replace the waterline.

You will not be able to determine that your filter needs to be replaced until you notice a difference in flavor, which you would not notice without the filter light.

How Samsung Water Filter Indicator Works

The majority of Samsung refrigerators are equipped with filter light indications, which alert the user when the water filter needs to be replaced or cleaned. Moreover, it implies that, following the replacement of the filter, you must reset the filter light in the Samsung refrigerator to its default setting. But why is this the case, you may wonder. Water filters are often only effective for a maximum of six months at a time. However, depending on the type of water that passes through the waterline, it may be necessary to replace the pipe.

A change in flavor is the only way to know whether your filter needs to be changed, and the filter light will not indicate that this is the case.

How to Reset the Filter Light on Your Samsung Refrigerator

The following are some methods for resetting the filter light on your Samsung refrigerator: Option 1: Press and hold the Alarm button on your Samsung refrigerator for 3 to 5 seconds until the alarm sounds. Option 2: Press and hold the Ice Type/Water button for 3 to 5 seconds to activate the ice. 3. Hold down the Ice/Water button for 3 to 5 seconds. Option 3: Option 4: Press and hold down both the Ice Type and Child lock buttons for 3 to 5 seconds to unlock the device. Option 5: Press and hold the Crushed Ice button for 3 to 5 seconds until the ice is crushed.

See also:  Why Would A Tankless Water Heater Stop Working?

That’s all there is to it when it comes to understanding how to reset the filter light on your refrigerator.

It includes detailed instructions for resetting the filter light on the Samsung RF4289 and RSG309 refrigerators.

However, for a comprehensive resource on resetting your Samsung refrigerator, see this article: How To Reset Your Samsung Refrigerator (PDF). Alternatively, you may watch the video below to find out more information:

Video: How To Reset Filter Light On Samsung Refrigerator

To reset the filter light on your Samsung refrigerator, you can use one of the methods listed below: The first option is to press and hold the Alarm button on your Samsung refrigerator for 3 to 5 seconds. Option 2: 2. Hold down the Ice Type/Water button for 3 to 5 seconds after pressing the button for Option 1. Option 2. 3. Hold the Ice/Water button down for 3 to 5 seconds. Option 3: 4. Hold down the Ice Type and Child lock buttons for 3 to 5 seconds after pressing them both at the same time.

  1. In most cases, performing any of the aforementioned actions will reset the filter light, restoring it to its default configuration.
  2. To understand more about filter light reset, check out this article from Samsung.
  3. In addition, you may want to learn more about how to replace the water filter in your Samsung refrigerator, particularly if the existing water filter has exceeded its filtration capacity or has been in use for an extended period of time.
  4. Alternately, you may watch the video below to find out more information:

Get Instant Help — Ask An Experienced Verified Appliance Technician

Do you require professional assistance? If you need to speak with a verified appliance technician right now, click here to use the chat box on this page. There is no need for costly in-home service visits. There are no appointments. There is no waiting.

Samsung refrigerator filter reset step by step ( rf28r7351sr, rf23j9011sr, rf28k9070sr, rf28r7201sr, rf22k9381sr, rf28k9380sr/aa, rf28r7351sg )

Make sure you have the correct filter for your Samsung refrigerator. Discover where on the fridge a filter has been fitted and mark it. Replace the old filter with a new one after removing the old one. Fill reservoirs with one gallon of water each and purify the water via a filter to remove any contaminants. Finally, the indication for changing the water filter should be reset. How to Reset the Samsung Refrigerator Filter in Step by Step Instructions Please follow the steps in this instruction to methodically reset the refrigerator filter and to begin using the filter in normal circumstances.

  • In most cases, the indication or notification system is mounted on the refrigerator’s front door or on the side of the refrigerator.
  • Step 1: Locate the previous filter.
  • Find the location and carefully study the instructions on the handle that are written on the door.
  • Step 2: Replace the existing filter.
  • Check to see that you have purchased the correct model of filter for your refrigerator.
  • Step 3: Reset the button’s settings.
  • Locate the button that says “Reset filter option.” Please push and hold the button for a few seconds after pressing it carefully.

Please continue to hold the button down until the notification light goes out and your filter indicates that the reset has been completed.

Fill the reservoir with one gallon of water and turn on the machine to let the water to filter itself.

The infection would have been contained in the first few drinks.

As a result, refrain from consuming it and instead wait for the water to become clean.

The water filter will last approximately six months after it has been replaced.

Do not avoid alarm noises at any costs.

Once the blockage has grown to a significant size, the water filter will no longer be able to flow the water through it.

In addition, it alters the flavor of water and causes water to smell foul after a while.

Do not avoid alarm noises at any costs.

If you just press the button again without changing the filter, there is a chance that the filter will begin to send polluted water through it again.

It will have a negative influence on the wellness of your body.

If necessary, consult the instructions. Reset options are available on all Samsung refrigerators through a single button press. Some may require you to complete extra steps before you may reset the button. Most of the time, though, everything is the same and functions completely great.

How to process Samsung refrigerator filter reset rf28r7351sr?

The Samsung refrigerator filter has an automated mechanism that allows consumers to reset the system with a single touch of a button on the side of the refrigerator. The reset button may be found on the refrigerator’s front panel, with the other settings, near the ice maker. It signifies that the filter has been reset, and you will be able to begin using the filter once more after clicking on it. The notice will be turned off if you locate and hold down the reset button for three consecutive seconds.

How to proceed to Samsung refrigerator filter reset rf23j9011sr?

With the Samsung refrigerator filter, customers can easily reset the system with a single push button, thanks to an automated feature that is included. Locate the reset button, which is among the other settings on the front screen of the refrigerator. It signifies that the filter has been reset, and you will be able to begin using the filter once more after clicking on this button. The notification will be turned off if you locate and hold down the reset button for 3 seconds. After the notification has been restored to normal, the reset operation is complete.

How to conduct a Samsung refrigerator filter reset rf28k9070sr?

When the filter begins to display a message on a screen suggesting that a reset is required, it is important to replace the filter completely in order to maintain your refrigerator operating properly. For the best results, please push and hold the button located on the front screen of the refrigerator for a few seconds, as stated on the display. Soon, your refrigerator’s filter will be reset, and you will be able to begin drinking the filtered water it has produced.

How to perform Samsung refrigerator filter reset rf28r7201sr?

In order to maintain your refrigerator running properly, it is necessary to change the filter completely when the filter begins to display a message on a screen indicating that a reset is required. For the best results, please push and hold the button located on the refrigerator’s front screen for a few seconds, as instructed on the screen. Within a few days, your refrigerator filter will be reset, and you will be able to use the filtered water once more.

What is needed for Samsung refrigerator filter reset rf22k9381sr?

It is simple to replace the filter with a few simple steps. Navigate to the filter settings and delete the previous filter before replacing it with the newly created one. The new filter will be ready to be reset after it has been installed. Locate the display in front of the refrigerator at this point. On the screen, you’ll see a button that says “auto-reset option.” Find the button and hold it down for a few seconds. It will be reset, and you will be able to use the filter to drink pure water once more after that.

Ways to Samsung refrigerator filter reset rf28k9380sr/aa?

You will be prompted to reset the Samsung refrigerator after about six months. To determine the state of the filter, look at the water indicator. If you receive a message that the filter has to be reset, download the new filter and replace it with an existing one.

Locate the reset button and push and hold it for a few seconds—for a short period of time after you have secured the new filter in place. The filter will be ready to use at this point.

Why do you need to perform a Samsung refrigerator filter reset rf28r7351sg?

A message to reset the Samsung refrigerator will appear after approximately six months. To determine the state of the filter, look at the water indicator. – If an alert is received that the filter needs to be reset, download and install the new filter before replacing the old one. After locating the reset button, push and hold it for a few seconds—for a short period of time after you have successfully installed the new filter. This will now make the filter ready for usage.

How do you reset a Samsung filter indicator?

Locate the multi-functional button on the refrigerator’s control panel. Keep pressing the button for a few seconds until the red light goes off. After that, the filter will be reset, and you will be able to begin using the Samsung filter water immediately after that.

What to do when you see a Samsung refrigerator filter reset the light?

The notice serves as a signal that the Samsung filter has been reset. When you see the light, it is time to turn off the filter and turn it back on. After changing the filter, press and hold the refrigerator filter reset button for 3 seconds after replacing the filter. Once this is done, the water filter can once again be used. Resetting the filter is simple.

How many times can you reset the refrigerator filter?

It is an indicator that the Samsung filter has been reset, and the notice confirms this. The filter should be re-set as soon as you see the light. To reactivate your refrigerator filter after replacing it, press and hold the reset button for three seconds. You will be able to use the water filter once again when the filter has been reset.

How do you reset a refrigerator after changing the water filter?

Modern refrigerator water filters are fitted with a simple reset mechanism that is simple to use. Press the notification button that reads “Reset the water filter” after you have replaced the water filter with a new one once you have done so. The water filter will be reset in three seconds, and you will be able to use the filter once more after that time.

What to do when you cannot reset the refrigerator water filter indicator light?

It becomes a problem if the refrigerator’s water filter indication is not working properly. If the indication is still flashing, press and hold the filter reset button for 3 seconds, then release it after the notice has stopped blinking. It is possible that the surgery will not be successful in some instances. Test whether the system is unlocked using the ice maker reset procedure. Press and hold the ice maker’s reset button for a few seconds, then release it when the notice indicates that it has been reset.

If the problem consists, it suggests that the reset mechanism of a filter has failed and has to be replaced.

In such case, contact the support center and request that a specialist reset the Samsung filter.

Samsung Refrigerator Water Filter Reset

When the refrigerator’s water filter indication is locked, a problem might occur. If the indication is still flashing, press and hold the filter reset button for 3 seconds, then release it after the blinking notice has stopped. It is possible that the surgery will not be successful in some circumstances. Test whether the system is unlocked by doing an Ice Maker Reset on it. Long-term use of this button is recommended; once the reset notice appears, it should be turned off. Both of the indicators may have been reset by now, and you will be able to utilize the Samsung water filter in average condition once more in the near future.

It is possible that the filter’s reset mechanism has failed, in which case the fault is indicated by the word “consists.” If the problem persists, you may need to fix it yourself. In order to reset the Samsung filter, contact the support center and request a specialist.

Leave a Reply

Your email address will not be published.