Replace the water filter in your Samsung refrigerator
There are three different types of Samsung water filters, so you’ll want to be sure you’re getting the right one for your refrigerator before purchasing one. Replacement filters are available for purchase on ouraccessories page if needed. To begin, identify the filter in your refrigerator’s model. You should refer to your user handbook if you are unclear about the location. Then, on the filter itself, look for the model number printed on it. This will inform you of which of the following filter types you will require for your application.
If you’re not sure whether or not you need to replace the filter, look for an indication light on your refrigerator.
If you are about to replace the filter, the light will become purple to indicate that it is time.
You should alter the filter as soon as possible at this point.
- After turning off the water, identify the filter and clean it as needed. If you are unclear of where it is, please refer to your user handbook for assistance. Once you have unlocked the old water filter, remove its lid and swivel it counterclockwise to reinstall it. Afterwards, just pull it straight out of the filter housing to remove it. Prior to placing the new filter in the system, remove the protective cover from the top of the existing filter. Afterwards, insert it directly into the filter housing and turn it counter-clockwise
- Examine to ensure that the lock symbol corresponds to the indication line.
Types of HAFCU1 filters include:
- After turning off the water, identify the filter and clean it as needed. If you are unclear of where it is, please refer to your user handbook for assistance. Using a left-handed twist, you can remove the old filter. This will allow you to access it
- Afterwards, pull it downward to remove it from the filter housing. The replacement filter should be inserted by pushing it up into the filter housing and then turning it to the right. Check to ensure that the notch at the top of the filter corresponds to the arrow on the filter’s housing. Replace your filter and then flush it thoroughly with a few liters of water to wash out any contaminants or air that may have gotten into it. Then, make sure that the water filter light on your refrigerator is turned back on. Please refer to the following sections for further information.
After turning off the water, locate the filter and clean it as necessary. You should reference your user manual if you are unclear of where it is located. Using a left-hand twist, you may remove the old filter. Upon doing so, it will be unlocked. Afterwards, pull it down to release it from the filter housing. Using your fingers, press the new filter upwards and then to the right; this will ensure that it is properly installed. To avoid clogging the filter, make sure it has a notch at the top that matches the arrow on the housing.
Then, make sure that the water filter light on your refrigerator is turned off and back on again.
- If theFilter Resetbutton is accessible on the control panel, locate it and press it. In some cases, it is a secondary function of another button on the panel
- Once identified, press and hold the proper button for 3 seconds until the light turns out
- The filter symbol will either turn off or return to its usual color when the light is turned off. This restarts the timer for the next six months.
If the Filter Resetbutton is accessible on the control panel, locate it and press it. In certain cases, it is a secondary function of another button on the panel; once identified, press and hold the proper button for 3 seconds until the light turns off; the filter symbol will either turn off or return to its usual color when the light is turned off. Essentially, this resets the timer for six months.
- Start by selecting Apps from the Home screen, followed by Fridge Manager
- Then choose Water Filter from the Home screen, followed by Reset and then Proceed. The filter light and timer will be reset as a result of this. If you require a Samsung water filter, you may purchase one by pressing the Buy Filter button after tapping the water filter symbol.
On models RF4289 and RSG309, you may also reset the filter light by pressing the reset button.
- Then, at the bottom of the screen, navigate to and pick theSettingsicon, and then tapWater Filter to begin. As soon as the Water Filter menu appears, press Next three times in the lower right corner of the screen until you reach page 4/4 of the Water Filter menu. Hold the object with your fingertips. Remove and reinstall the water filter until it changes its status, which may be done in the middle of the display. After the message “Filter Replaced” appears and disappears from the screen, tapSave in the lower right corner of the screen.
In order to define what is filtered by a water filter, the National Sanitation Foundation (NSF) and the American National Standards Institute (ANSI) have developed a variety of standards. Samsung’s water filters are Carbon Filters that meet the requirements of the NSF/ANSI 42, NSF/ANSI 53, and NSF/ANSI 401 standards, among other requirements. NSF/ANSI 42 is a standard for food safety and sanitation.
- Filtered to decrease the presence of aesthetically objectionable contaminants like as chlorine and taste/odor
NSF/ANSI 53 is a standard that specifies how a product should be designed, manufactured, and tested.
- Certified to decrease a pollutant that has a negative impact on health. The following substances have been identified as having negative health effects by the United States Environmental Protection Agency (EPA) and Health Canada: Asbestos, Atrazine, Benzene, 2, 4-D, Carbofuran, Chlorbenzene, Cyst (99.99 percent), Endrin, Ethylbenzene, Lead, Lindane, Mercury, O-Dichlorobenzene, P-Dichlorobenzene, Tetrachloroethylene, Toxaphene
NSF/ANSI 401 is a standard for food safety and sanitation.
- It has been proven to lower one or more of the 15 emerging pollutants in drinking water by at least 50%. Pharmaceuticals and chemicals that are not yet controlled by the Environmental Protection Agency or Health Canada include: atenolol, bisphenol A, carbamazepine, DEET, estrone, linduron, nonylphenol, phenytoin, trimethoprim, and trimethoprim sodium.
Check out our troubleshooting guide for assistance if you are having difficulties installing the water filter in your refrigerator.
How to replace the water purifier filter for my refrigerator?
The most recent update was made on September 22, 2020. Samsung refrigerators are fitted with filters that cleanse and deodorize the water they hold. When the maximum usage limit for each filter is reached, a red light will illuminate, signaling that the filters must be replaced. For information on how to change the water purifier filter, see the instructions below. It is also a good idea to consult the owner’s handbook of your refrigerator for further information.
When the water filter indicator is lit on the display panel
When the water filter indicator light reaches five months or 450 gallons, it is programmed to become orange, and when it reaches six months or 500 gallons, it is set to turn red. To reset the water filter indication, remove the filter and then reset the function on the control panel. Replace the filter and try again. The color of the light might vary depending on the type. Green or blue lights are common. Note:
- Based on the model that you own, the actual design of the display panel may change. Despite the fact that this image is a reference in English, it is also accessible in the language of your choice.
How to replace the water purifier filter
Based on the model that you have, the actual design of the display screen may change. This graphic serves as a reference in English, but it is also accessible in the language of your choice; nonetheless,
- This picture is only a sample in English, and the image is also available in the language of your choice
- When removing the filter cartridge, make sure to keep it horizontal.
Reset the filter indicator light after replacement
This picture is only a sample in English, and the image is also available in the language of your choice. When removing the filter cartridge, make sure it is horizontal.
- The serial number may be easily seen by opening the upper left door on the front or the lower left door on the side
- Both doors are located in the top left corner. The label for your refrigerator contains the model name and serial number of your refrigerator
Customer care representatives may provide a list of available filters, and you can also purchase a filter online by entering the refrigerator’s serial number in the search box.
Thank you for your feedback!
Please respond to all of the questions.
Contact Us
There are a variety of various ways to get in touch with us, including Live Chat, Email, Whatsapp, and other methods.
Call
Speak with a member of our knowledgeable and devoted staff.
Face to face Support
Find the Samsung Service Centers in your region that are the most convenient for you.
Refrigerator Water Filters & Replacements
Make certain that your family has access to pure, clean, and delicious water. With a genuine Samsung water filter, you can eliminate toxins in your household.
Our filters are NSF* certified to remove many contaminants.
You should be aware that Samsung filters out herbicides, pesticides, lead, mercury, asbestos, and even drugs such as ibuprofen, carbamazepine, and a whole host of other difficult-to-pronounce compounds. in order for you to be able to rest (and drink easy).
Why your filter choice matters
Samsung filters out up to 80 percent more pollutants than other major private label products, according to the manufacturer. Not only will you be able to enjoy fresher and cleaner water, but choosing a Samsung filter will also ensure that you will not have to struggle with water leakage and other difficulties that might occur when using a different brand of filter.
Easy to install. Easy to use.
The last thing you want is to have to deal with a difficult water filter installation. Our water filters are specifically designed for Samsung refrigerators, making them simple to install.
– Genuine Samsung water filters are available at a discounted price of $15 per filter for Art, Samsung customers. A 6-month auto renewal guarantees that you receive the best fit every time you purchase. You may make changes to your subscription from your account at any time.
Subscribe and save
Now is the time to subscribe to save 30% a year on water filters and to receive an automated replacement every 6 months—as well as free Samsung assistance throughout your 1-year warranty period.
Support topics
Now is the time to subscribe to save 30% a year on water filters and to receive an automatic replacement every 6 months—plus, free Samsung support for the duration of your 1-year guarantee.
How to Change the Water Filter on a Samsung Refrigerator
You’ve been ignoring the Change Water Filter Indicator on your Samsung refrigerator for a little bit longer than you should have. If this is the case, don’t waste any more time! Follow these simple step-by-step directions to learn how to replace the water filter in your Samsung refrigerator. It is critical to change your Samsung water filter on a regular basis for the health of your family and your refrigerator! A clean water filter installed in your Samsung french door, four flex, or side-by-side refrigerator may make a significant impact in the quality of your drinking water and food preparation.
Step-by-Step: How to Change the Water Filter on a Samsung Refrigerator
If you don’t have technical skills, changing your water filter is a breeze thanks to a Samsung design. You can begin by following the steps outlined in this document.
Step 1: Purchase the Correct Samsung Water Filter
We strongly advise you to get the Samsung Factory Water Filter. If at all possible, stay away from knock-off brands. Although they are less expensive, the quality is not similar. The Samsung Factory Water Filter may be purchased online through Amazon, with most items shipping the same day on conventional Prime or free 2-hour delivery on Prime Now, depending on the product. We encourage that you sign up for the Amazon Subscribe and Save program in order to save money on future purchases. To ensure that you never have an out-of-date water filter again, schedule your water filter to be delivered automatically every five months.
Step 2: Verify you have the right part!
The Samsung Factory Water Filter is a product that we recommend purchasing. If at all possible, stay away from knockoff brands. Despite the fact that they are less expensive, their quality is inferior. On Amazon, you can order the Samsung Factory Water Filter for a low price and receive it the following day with conventional Prime or free 2-hour delivery with Prime Now, depending on availability. We urge that you sign up for the Amazon Subscribe and Save program in order to save money on your purchases in the future.
Local businesses such as Lowe’s, Home Depot, or an appliance parts store near you may also have the part you want.
Step 3: Locate the Samsung Water Filter on Your Refrigerator.
The position of the water filter is determined by the setup of your Samsung refrigerator. French DoorsFour Flex models have a water filter that is situated between the produce drawers and the French DoorsFour Flex models’ fresh food area (as pictured below).
Samsung side-by-side refrigerators are equipped with a water filter, which is positioned on the fresh food side of the bottom drawer on the right-hand side of the unit.
Step 4: Prepare the Filter for Installation
Simple removal of the plastic wrapping and removal of the top cap are all that is required to ready the filter for installation. A well designed filter will look something like this.
Step 5: Install the Samsung Water Filter
Simply remove the filter’s plastic wrapper and unscrew the top cap to get it ready for installation. The following is an example of a prepared filter:
Step 6: Purge 1 Gallon of Water
1 gallon of water should be sent through the filter. For the first 3-5 seconds, you may hear some air in the lines. This is quite normal. Remove the water from the container. It’s now time to put your water dispenser to work!
Step 7: Reset the Change Water Filter Indicator
By pressing and holding the Crushed Ice button for three seconds, you may reset the Change Water Filter Indicator light. Do you need assistance with the water dispenser or ice maker on your Samsung refrigerator? For Samsung Certified Care on your refrigerator, get in touch with Unique Repair Services.
Samsung Refrigerator Water Filter – Best Buy
Comment from the top: “Great value for these two waterfilters; no, they are not Samsung filters, but they are insignia filters that fit a Samsung refrigerator; approximately 50 dollars for the pair; if I had gotten a Samsung filter, it would have been 50 dollars for one; so yes, great value; would and will buy again.” I bought two waterfilters, which are not Samsungfilters, but they are insigniafilters that fit a Samsung refrigerator, which cost around $50 for the pair, which would have cost me 50 dollars for one if I had purchased the Samsungfilters.”>Read all user reviews
Product Description
If you want to enhance your health, start with the amount of water you consume on a daily basis. The Best Buy basics are as follows: It filters mercury, lead, and other hazardous impurities from water with the BE-SSHQ532 NSF 42/53 Water Filter Replacement for Select Samsung Refrigerators (2-pack). Each filter is NSF-certified to eliminate chlorine while also maintaining the fresh and clean taste of your water for up to six months or 316 gallons. At the same time, they retain vital minerals that contribute to increased flavor.
Furthermore, it is a more affordable alternative to premium manufacturer brands.
See the full range of Refrigerator Water Filters.
Samsung Fridge Filters: Easy-Guide to Replacing, Resetting and Changing.
Samsung is one of the most successful corporations in the world today. The South Korean technology corporation, which has its headquarters in Seoul’s Samsung Town, was initially started as a trade company, but it entered the electronics sector in the 1970s after expanding into other markets. Samsung declared in 2015 that it intended to surpass General Electric as the world’s largest appliance manufacturer. To achieve this, as you might expect, the company had to outperform numerous well-known global corporations, like Whirlpool, Bosch, and Electrolux, among others.
- Samsung’s collection of home appliances will feature refrigerators that supplied sparkling as well as still, filtered drinking water, making them far more sophisticated than anything else that other household manufacturers were manufacturing at the time.
- Samsung is unquestionably one of the world’s biggest appliance manufacturers, despite the fact that they are not exactly at the top of the scoreboard that has just been established.
- One of the reasons water tastes so much better when it comes out of a Samsung refrigerator is due to the superior filtering system that the refrigerator has installed.
- It is critical that you update your Samsung water filter on a regular basis if you want to continue drinking wonderful water at home.
- This will result in terrible tasting drinks that you will be embarrassed to give your friends and family.
We’ve put together a simple tutorial on everything you need to know about replacing your Samsung fridge filter at home so that you can continue to be proud of your great beers, clean water, and crystal-clear ice.
1. How to replace RSG5UCRS Samsung Fridge Filter:
When it comes to replacing your RSG5UCRS Samsung Fridge Filter, we have some good news for you: it’s more simpler than you would imagine. When the filter indicator light becomes orange or pink, it indicates that a new filter should be purchased. When the filter indicator becomes red, it is time to replace it. If six months have passed and the indication light has not gone red, we nonetheless recommend that you replace the filter in order to preserve the excellent quality of your drinking water at all times.
Only internal filters should be replaced according to the procedures provided below.
- The old water filter may be removed by turning it 45 degrees to the left to open it
- At this point, gently remove the old water filter and toss it away
- The water will stop off automatically at this time. Insert the new water filter into the available area and rotate it 45 degrees to the right
- If the padlock symbol on the filter corresponds to the sign on the filter, the filter is in the proper position. Immediately following the installation of the new filter, push the water filter reset button for three seconds to reset the light indicator.
Suggestions for improvement In the event that you are having difficulty removing the water filter, it is possible that there is excessive water pressure behind the filter. Remove the top two refrigerator shelves and use a stronger pull on the filter to get it out. If you are unable to squeeze the new filter into the available area, turn off the water supply valve and dispense a little amount of water. As a result, the pressure will be reduced, making it easier to install the new filter. All of the steps that follow are for external filters only.
Instructions on how to change an internal filter may be found further up the page.
- Immediately turn off the water supply
- Remove the old cartridge from the system and dispose of it properly
- The water filter should be positioned such that it flows in the direction of the refrigerator
- The inlet and exit tubing should be connected to the proper end of the filter by firmly inserting the tube all the way into the filter until it is snugly shut
- Check to see that the tube is square and free of scratches – you may trim it if required. The filter clip should be installed according to the directions in the installation manual. Make sure there are no leaks in the filter by turning on the water. Re-do the installation processes and check again whether there are any leaks. If the leaks continue, remove the filter and contact customer service. Allow water to circulate through the filter for five minutes in order to clean the entire system.
2.How to Replace a DA29-00003F Water Filter
The DA29-00003F water filter is a replacement for the DA29-00003G, DA29-00003B, and DA29-00003A water filters, among others. In no way is it a substitute for the superior DA29-00003G filter, nor is it compatible with that more sophisticated filter. The replacement of an internalDA29-00003F water filter is described in the following instructions.
- The old water filter may be removed by turning it 45 degrees to the left to open it
- Gently take it out and throw it away — this will cause the water to cut off automatically
- To install the replacement water filter, insert it and rotate it 45 degrees to the right to secure it in place
- If the padlock sign on the water filter corresponds to the symbol on the water filter, you have completed the task successfully. To reset the water filter indication, press and hold the water filter reset button for three seconds.
Suggestions for improvement In the event that you are having difficulty removing the water filter, it is possible that there is excessive water pressure behind the filter. Remove the top two refrigerator shelves and use a stronger pull on the filter to get it out. If you are unable to squeeze the new filter into the available area, turn off the water supply valve and dispense a little amount of water. As a result, the pressure will be reduced, making it easier to install the new filter.
3. How to Reset the Water Filter Indicator Light on a Samsung Fridge
In addition to the water filter, every Samsung refrigerator that has one features a water filter indicator that tells you when it’s time to replace the water cartridge. The filter should be replaced once every six months regardless of whether or not the light changes color. This will ensure that you continue to drink the high-quality water that you have come to like. If you don’t change your water filter on a regular basis, it won’t function properly. Instead of drinking great-tasting, clean water, you’ll be forced to drink strange-tasting water that may include unwelcome toxins.
Blue indicates that your water filter is performing properly.
Red:Your water filter has reached the end of its useful life and it is time to replace it with a new one.
By pushing and holding the “Alarm / Hold for 3 seconds to Reset Filter” button for three seconds, you may reset the indicator light.
If your model has an inside control panel, press and hold the “Power Cool” and “Fridge” buttons for three seconds at the same time. This will return the indicator light to its original blue state.
4. How to Replace a DA29-00003G Samsung Fridge Filter
Instructions for internal filters are provided in the next section. The Samsung DA29-00003G water filter is always installed from inside the device itself.
- To remove the old water filter, twist it a quarter turn to the left to free it
- Then lift it out. Gently remove the old water filter and throw it away
- This will cause the water to be switched off automatically. Insert the new water filter and rotate it by a quarter turn to the right until it is secure. If the padlock sign on the water filter corresponds to the symbol on the water filter, you have successfully installed it. The water filter indication should be reset after installation by pressing the water filter reset button for three seconds after completion.
Suggestions for improvement In the event that you are having difficulty removing the water filter, it is possible that there is excessive water pressure behind the filter. Remove the top two refrigerator shelves and use a stronger pull on the filter to get it out. If you are unable to squeeze the new filter into the available area, turn off the water supply valve and dispense a little amount of water. As a result, the pressure will be reduced, making it easier to install the new filter.
5. Why You Need to Change Your Fridge Filter Every 6 Months
Suggestions for further reading Having trouble removing the water filter? It might be due to a buildup of water pressure behind the filter that needs to be addressed. Remove the top two refrigerator shelves and use a stronger pull to get the filter out of the way. Closing the water supply valve and dispensing a small amount of water may be necessary if the new filter will not fit in the existing space Because of this, the pressure will be reduced, which will make it easier to install the new water filter.
How To Change Your Samsung Fridge Water Filter
Samsung refrigerators are among the most popular models on the Australian market. Homeowners like the built-in usefulness of their cabinets because of the diverse selection of functions and styles available. On a daily basis, the Samsung refrigerator filter supplies your family with clean, fresh, filtered water and ice. Each Samsung water filter has a lifespan of around six months, however some may need to be replaced sooner if they are used often or if the water is exceptionally harsh. The fact that your Samsung refrigerator’s filter indication light has begun to illuminate indicates that it is time for you to replace your old filter with a new one.
Where Is the Water Filter on My Samsung Fridge?
In order to purchase a new Samsung water filter, you must first determine the model of Samsung water filter you currently own. You will be able to purchase the appropriate replacement because of this. Discount Fridge Filters assists clients in locating the appropriate filter for their refrigerators depending on the model number of the refrigerator. Other brands of refrigerator filters may be used to replace the filter in a Samsung refrigerator and perform just as well; however, you must know the model number of your refrigerator in order to obtain suitable fridge filters.
If you are having trouble identifying the model number of your Samsung water filter, you may watch the video below.
It is possible for your water filter to be installed in three different locations.
In some versions, the water filter will be located on the top right inside or at the back of the refrigerator. If you are unable to locate your water filter or identify the model number of your refrigerator, you can always get in touch with us at Discount Fridge Filters for assistance.
Do You Have To Turn Water Off To Change Your Samsung Refrigerator Filter?
In order to purchase a new Samsung water filter, you must first determine the type of Samsung water filter you currently possess. The ability to purchase the proper replacement is made possible by this. Using their refrigerator model number, we at Discount Fridge Filters assist consumers in finding the best match for their refrigerators. The filter in a Samsung refrigerator may be replaced with one from another manufacturer and function just as well, but you must first identify your refrigerator model in order to obtain fridge filters that are compatible with your refrigerator model.
You can simply determine the model number of your Samsung water filter by watching the video below.
It is possible for your water filter to be installed in one of three locations: You will most likely find the water filter between the crisper and freezer doors in the refrigerator section if you have a French door refrigerator.
If you are unable to locate your water filter or identify the model number of your refrigerator, you can always get in touch with us at Discount Fridge Filters for help.
How To Change An Internal Water Filter on a Samsung Refrigerator
Determine the placement of the water filter in your refrigerator. 2. Remove the old filter by lifting the protective cover (if your filter type has one) and turning it counter-clockwise to dislodge it. Alternatively, if it is difficult to lift, it is possible that pressure has built up; dispense some water and try to relax it before tugging it again. 3. Take your new filter out of the packing and remove the protective cover from it. 4. Press in the new filter and spin it clockwise until its lock symbol is aligned with the arrow.
- Replace the old filter.
- Replace the filter cap, if your filter type has one, and run several litres of water to confirm that the water has been adequately filtered and that any air has been drained out of the line.
- This assures that there will be no leaks in the future.
- Reset the filter-indicator light on the inside of your refrigerator.
- The indicator light should return to its original state of green.
- You may also go to the user manual that came with your Samsung refrigerator for complete instructions on how to change the water filter and reset the indication light on the refrigerator.
How To Change An External Water Filter on a Samsung Refrigerator
1. Locate the isolation valve, which should be situated somewhere along the water supply line to the refrigerator. Turn it off if it’s on. Using the water outlet located near the refrigerator, depressurize the system by drawing a large glass of water. 2. Have a bucket and a towel handy in case there is a tiny amount of water spilled throughout the operation. The old filter should be removed by depressing the locking collars at either end of the filter with your thumb nail (or something similar) while simultaneously pulling out the water supply line from the filter.
- It is possible to hold down the locking collar with your fingers or with a solid edged item, which will allow the hose to slip out with relative ease.
- We recommend that you use a sharp object, such as a Stanley knife.
- 4.
- For this, you may either place the filter under a running faucet and let the water to flow directly into a sink, or you can submerge the filter in a bucket or other container of water.
- 5.
- The line will go in approximately 5 – 10mm and you will be able to fully put the filter into place.
- After you’ve placed the filter in the bucket, switch on the water supply and allow approximately 5 litres of water to run through the filter and into the container.
After you have turned off the water supply, connect the line that flows into the refrigerator.
7.
8.
If the filter light on your Samsung refrigerator does not come back on, press and hold the “Ice Type” or “Moisture Control” buttons as well as the Child Lock button for three seconds.
Avoid holding the buttons for an excessive amount of time, since this may force the procedure to restart, requiring you to release all of the buttons and hold them again until the light changes to green again.
You may also go to the user manual that came with your Samsung refrigerator for complete instructions on how to change the water filter and reset the indication light on the refrigerator.
Can I Run My Samsung Refrigerator Without the Water Filter?
Water filters are designed to eliminate toxins such as lead, mercury, chlorine, and other contaminants from your drinking water and ice, among other things. The majority of Samsung refrigerators may still work well even if they do not have a water filter installed. In spite of the fact that rotary valves in your refrigerator may bypass the water filter and provide you with water even when there isn’t a water filter installed, this does not imply that you should continue to use your Samsung refrigerator in this manner.
At first, you may be unsure about how to replace your water filter.
In the event that you do not change your old filter after 6 months, you may face mineral buildup, which may result in your refrigerator experiencing costly malfunctions.
Tips on How to Change Your Samsung 3G 3F Filter Head Alignment
A misaligned head of a Samsung 3G 3F water filter might cause difficulties if the filter is used. If you have a Samsung 3G 3F water filter, you may face problems if the head gets misaligned. We have covered the basics of this straightforward repair procedure in a few steps. You may quickly correct the alignment of your water filter by watching the video provided below.
Where Can I Buy a Samsung Refrigerator Water Filter?
At Discount Fridge Filters, we can assist you in selecting the appropriate filter and ensuring that it is compatible with the Samsung refrigerator model that you have purchased. On the market, there are many different types of water filters to choose from, and you can save money by selecting one from our extensive inventory. Please do not hesitate to contact us at any time if you want assistance in selecting the appropriate water filter. We would be pleased to answer any questions you may have and to provide you with guidance on how to go about installing it.
Amazon.com: SAMSUNG – DA29-00020B-2P Samsung Electronics HAF-CIN Refrigerator Water Filter, white, (Pack of 2) , Packaging May vary : Appliances
a rating of one out of five stars Product that is a forgery. The Walmart product I purchased in-store was genuine! On March 21, 2020, a review was conducted in the United States. Don’t buy anything from Amazon since it is a phony. Read the paragraphs and pay close attention to the font size and style. The one on the right is the genuine article. I’ve always thought of it as being similar to the one that came with the refrigerator. Walmart has never failed to deliver on its promises. (It’s hard to tell from the photographs.) “Their” printer is a jerk!
It’s a phony product, to be honest. I couldn’t believe Amazon would allow this to happen. At the very least, get a printer that produces labels at a resolution of 300dpi. Even the most obvious signs are often overlooked by average customers. I’m not going to let my $3.5k smart fridge go to waste!
Top reviews from the United States
the rating is one out of five Product that is a counterfeit of the original. I purchased a genuine Walmart goods in store. On March 21, 2020, the United States will conduct a review of this document. Buy from a legitimate retailer rather than from Amazon. Pay close attention to the writings and the typeface. This is the genuine article. I’ve always thought of it as being similar to the one that came with my refrigerator. With Walmart, there’s never been a dud. Despite the fact that it is not obvious in the photographs, They have a terrible printer!
Amazon enables this in some way, I couldn’t believe it.
Ordinary customers will always overlook the most obvious indications.
Top reviews from other countries
5.0 stars out of 5 for this product Authentic. On September 2, 2019, a reviewer in the United Kingdom expressed satisfaction with their purchase. It’s the perfect size and shape for my refrigerator. 5.0 stars out of 5 for this product This is a genuine item. On February 10, 2019, a reviewer in the United Kingdom expressed satisfaction with their purchase. This is a genuine item that works in my refrigerator. 4.0 stars out of 5 for this product The same as the original, but at a better price On May 25, 2016, a reviewer in the United Kingdom stated that they had made a verified purchase.
When compared to purchasing directly from the manufacturer, this filter offers substantial savings.
5.0 stars out of 5 for this product Exceptional value Purchased on February 23, 2020 in the United Kingdom and reviewed on February 23, 2020 4.0 stars out of 5 for this product Samsung Water Filtration Systems On May 6, 2020, a reviewer in the United Kingdom expressed satisfaction with their purchase.