How To Replace Samsung Refrigerator Water Filter

Replace the water filter in your Samsung refrigerator

In 2001, A.O. Smith acquired the company. Water heaters for a variety of different manufacturers were formerly made by the company.

  1. After turning off the water, identify the filter and clean it as needed. If you are unclear of where it is, please refer to your user handbook for assistance. Once you have unlocked the old water filter, remove its lid and swivel it counterclockwise to reinstall it. Afterwards, just pull it straight out of the filter housing to remove it. Prior to placing the new filter in the system, remove the protective cover from the top of the existing filter. Afterwards, insert it directly into the filter housing and turn it counter-clockwise
  2. Examine to ensure that the lock symbol corresponds to the indication line.

Types of HAFCU1 filters include:

  1. After turning off the water, identify the filter and clean it as needed. If you are unclear of where it is, please refer to your user handbook for assistance. Using a left-handed twist, you can remove the old filter. This will allow you to access it
  2. Afterwards, pull it downward to remove it from the filter housing. The replacement filter should be inserted by pushing it up into the filter housing and then turning it to the right. Check to ensure that the notch at the top of the filter corresponds to the arrow on the filter’s housing. Replace your filter and then flush it thoroughly with a few liters of water to wash out any contaminants or air that may have gotten into it. Then, make sure that the water filter light on your refrigerator is turned back on. Please refer to the following sections for further information.

After turning off the water, locate the filter and clean it as necessary. You should reference your user manual if you are unclear of where it is located. Using a left-hand twist, you may remove the old filter. Upon doing so, it will be unlocked. Afterwards, pull it down to release it from the filter housing. Using your fingers, press the new filter upwards and then to the right; this will ensure that it is properly installed. To avoid clogging the filter, make sure it has a notch at the top that matches the arrow on the housing.

Then, make sure that the water filter light on your refrigerator is turned off and back on again.

  1. If theFilter Resetbutton is accessible on the control panel, locate it and press it. In some cases, it is a secondary function of another button on the panel
  2. Once identified, press and hold the proper button for 3 seconds until the light turns out
  3. The filter symbol will either turn off or return to its usual color when the light is turned off. This restarts the timer for the next six months.

Please keep in mind that some models may require you to press two buttons at the same time in order to reset the light. Touch screen models will instead make use of on-screen menus. Consult your refrigerator’s owner’s handbook for detailed operating instructions. The water filter light and timer on your Family Hub refrigerator may be reset by following the instructions outlined below.

  1. Start by selecting Apps from the Home screen, followed by Fridge Manager
  2. Then choose Water Filter from the Home screen, followed by Reset and then Proceed. The filter light and timer will be reset as a result of this. If you require a Samsung water filter, you may purchase one by pressing the Buy Filter button after tapping the water filter symbol.

On models RF4289 and RSG309, you may also reset the filter light by pressing the reset button.

  1. Then, at the bottom of the screen, navigate to and pick theSettingsicon, and then tapWater Filter to begin. As soon as the Water Filter menu appears, press Next three times in the lower right corner of the screen until you reach page 4/4 of the Water Filter menu. Hold the object with your fingertips. Remove and reinstall the water filter until it changes its status, which may be done in the middle of the display. After the message “Filter Replaced” appears and disappears from the screen, tapSave in the lower right corner of the screen.

Then, at the bottom of the screen, navigate to and pick theSettingsicon, and then tapWater Filter. As soon as the Water Filter menu appears, hit Next three times in the lower right corner of the screen until you reach page 4/4 of the Water Filter menu. Hold the object with your fingertips Remove and reinstall the water filter until it changes its status, which should take around a minute or two. TapSave in the bottom right corner of the display when the message “Filter Replaced” shows and disappears.

  • Filtered to decrease the presence of aesthetically objectionable contaminants like as chlorine and taste/odor

NSF/ANSI 53 is a standard that specifies how a product should be designed, manufactured, and tested.

  • Certified to decrease a pollutant that has a negative impact on health. The following substances have been identified as having negative health effects by the United States Environmental Protection Agency (EPA) and Health Canada: Asbestos, Atrazine, Benzene, 2, 4-D, Carbofuran, Chlorbenzene, Cyst (99.99 percent), Endrin, Ethylbenzene, Lead, Lindane, Mercury, O-Dichlorobenzene, P-Dichlorobenzene, Tetrachloroethylene, Toxaphene

Obtaining certification for the reduction of a pollutant that has a negative impact on health The following contaminants have been identified as having negative health effects according to the Environmental Protection Agency (EPA) and Health Canada: Asbestos, Atrazine, Benzene, 2, 4-D, Carbofuran, Chlorbenzene, Cyst (99.99 percent), Endrin, Ethylbenzene, Lead, Lindane, Mercury, O-Dichlorobenzene, P-Dichlorobenzene, Tetrachloroethylene, Toxaphene,

  • It has been proven to lower one or more of the 15 emerging pollutants in drinking water by at least 50%. Pharmaceuticals and chemicals that are not yet controlled by the Environmental Protection Agency or Health Canada include: atenolol, bisphenol A, carbamazepine, DEET, estrone, linduron, nonylphenol, phenytoin, trimethoprim, and trimethoprim sodium.

Check out our troubleshooting guide for assistance if you are having difficulties installing the water filter in your refrigerator.

Refrigerator Water Filters & Replacements

Make certain that your family has access to pure, clean, and delicious water. With a genuine Samsung water filter, you can eliminate toxins in your household.

Our filters are NSF* certified to remove many contaminants.

You should be aware that Samsung filters out herbicides, pesticides, lead, mercury, asbestos, and even drugs such as ibuprofen, carbamazepine, and a whole host of other difficult-to-pronounce compounds.

in order for you to be able to rest (and drink easy).

Why your filter choice matters

Samsung filters out up to 80 percent more pollutants than other major private label products, according to the manufacturer. Not only will you be able to enjoy fresher and cleaner water, but choosing a Samsung filter will also ensure that you will not have to struggle with water leakage and other difficulties that might occur when using a different brand of filter.

Easy to install. Easy to use.

The last thing you want is to have to deal with a difficult water filter installation. Our water filters are specifically designed for Samsung refrigerators, making them simple to install. – Genuine Samsung water filters are available at a discounted price of $15 per filter for Art, Samsung customers. A 6-month auto renewal guarantees that you receive the best fit every time you purchase. You may make changes to your subscription from your account at any time.

Subscribe and save

Now is the time to subscribe to save 30% a year on water filters and to receive an automated replacement every 6 months—as well as free Samsung assistance throughout your 1-year warranty period.

Support topics

DISCOVER MORE1 Any damage caused by a non-genuine Samsung filter will not be covered by the manufacturer’s warranty. * NSF 42, 53, and 401 certified filters are available.

How to replace the water purifier filter for my refrigerator?

The most recent update was made on September 22, 2020. Samsung refrigerators are fitted with filters that cleanse and deodorize the water they hold. When the maximum usage limit for each filter is reached, a red light will illuminate, signaling that the filters must be replaced. For information on how to change the water purifier filter, see the instructions below. It is also a good idea to consult the owner’s handbook of your refrigerator for further information.

When the water filter indicator is lit on the display panel

When the water filter indicator light reaches five months or 450 gallons, it is programmed to become orange, and when it reaches six months or 500 gallons, it is set to turn red. To reset the water filter indication, remove the filter and then reset the function on the control panel. Replace the filter and try again. The color of the light might vary depending on the type. Green or blue lights are common. Note:

  • Based on the model that you own, the actual design of the display panel may change. Despite the fact that this image is a reference in English, it is also accessible in the language of your choice.

How to replace the water purifier filter

It is suggested that you change the filter as soon as the filter replacement notice shows on the display panel in order to ensure that you always obtain clean and sanitary water or ice. It is advised that you utilize the water after you have poured out more than 500ml after changing the filter. When replacing the water filter, you must first turn off the water supply valve to prevent water from leaking. Once the replacement is complete, be certain that the water supply valve is switched back on.

See also:  What Is The Most Efficient Electric Water Heater?

Step 2: Remove the filter cover and rotate the water filter counterclockwise to clear the sediment.

Place the new filter into the filter case and tighten it with your fingers by turning it clockwise until it locks.

  • This picture is only a sample in English, and the image is also available in the language of your choice
  • When removing the filter cartridge, make sure to keep it horizontal.

Reset the filter indicator light after replacement

Immediately following the replacement of the old filter with a new one, the filter replacement cycle must be reset by pushing and holding the alarm button for three seconds. This ensures that the product performs well and that replacement cycles are followed. When the filter indication is reset, the color of the indicator changes from red to green (or the words Replace Filter will disappear). Please keep in mind that this image is only a preview in English and that the full version is available in the language of your choice.

To determine which filter has to be replaced, look for the serial numbers that relate to each filter for your refrigerator model. The labels on the exterior of all Samsung refrigerators are located in two locations on the product’s exterior.

  • The serial number may be easily seen by opening the upper left door on the front or the lower left door on the side
  • Both doors are located in the top left corner. The label for your refrigerator contains the model name and serial number of your refrigerator

Customer care representatives may provide a list of available filters, and you can also purchase a filter online by entering the refrigerator’s serial number in the search box.

Thank you for your feedback!

Please respond to all of the questions.

Contact Us

There are a variety of various ways to get in touch with us, including Live Chat, Email, Whatsapp, and other methods.

Call

Speak with a member of our knowledgeable and devoted staff.

Face to face Support

Find the Samsung Service Centers in your region that are the most convenient for you.

How to Change the Water Filter on a Samsung Refrigerator

You’ve been ignoring the Change Water Filter Indicator on your Samsung refrigerator for a little bit longer than you should have. If this is the case, don’t waste any more time! Follow these simple step-by-step directions to learn how to replace the water filter in your Samsung refrigerator. It is critical to change your Samsung water filter on a regular basis for the health of your family and your refrigerator! A clean water filter installed in your Samsung french door, four flex, or side-by-side refrigerator may make a significant impact in the quality of your drinking water and food preparation.

Step-by-Step: How to Change the Water Filter on a Samsung Refrigerator

For a while now, you’ve been ignoring the Change Water Filter Indicator on your Samsung refrigerator’s door. If this is the case, don’t waste any more time waiting. Make simple changes to your Samsung refrigerator’s water filter by following these simple step-by-step instructions: Samsung water filters should be changed on a regular basis to ensure the health of your family and the long life of your refrigerator. In your Samsung refrigerator, a clean water filter installed in the french door, four flex, or side-by-side model may make a significant impact in the quality of your drinking water.

Step 1: Purchase the Correct Samsung Water Filter

We strongly advise you to get the Samsung Factory Water Filter. If at all possible, stay away from knock-off brands. Although they are less expensive, the quality is not similar. The Samsung Factory Water Filter may be purchased online through Amazon, with most items shipping the same day on conventional Prime or free 2-hour delivery on Prime Now, depending on the product. We encourage that you sign up for the Amazon Subscribe and Save program in order to save money on future purchases. To ensure that you never have an out-of-date water filter again, schedule your water filter to be delivered automatically every five months.

Step 2: Verify you have the right part!

Refrigerator water filters are model number specific, which means that you must use the exact filter for your refrigerator and not just any water filter. WARNING: Before opening the package, double-check that you have the appropriate filter. It is not possible to return the water filter once it has been installed. The water filter component number DA29-00020B (shown below) is used in the majority of Samsung french door, four flex, and side-by-side refrigerators; nevertheless, it is important to check the refrigerator model number to ensure that you are purchasing the proper filter for your product.

It is recommended that you replace your Samsung water filter after 300 gallons or 6 months. See the following specifications for further information: Your Samsung water filter will be sent with a new water filter, an instruction manual, and sticker reminders for the filter’s expiration date.

Step 3: Locate the Samsung Water Filter on Your Refrigerator.

The position of the water filter is determined by the setup of your Samsung refrigerator. French DoorsFour Flex models have a water filter that is situated between the produce drawers and the French DoorsFour Flex models’ fresh food area (as pictured below). Samsung side-by-side refrigerators are equipped with a water filter, which is positioned on the fresh food side of the bottom drawer on the right-hand side of the unit.

Step 4: Prepare the Filter for Installation

Simple removal of the plastic wrapping and removal of the top cap are all that is required to ready the filter for installation. A well designed filter will look something like this.

Step 5: Install the Samsung Water Filter

Installing the water filter is accomplished by turning the filter knob to the left. It takes approximately 1/4 turn to unlock the filter. If possible, you should be able to remove the filter without having to switch off the water supply. To release the filter, slowly move the refrigerator forward and switch off the main water supply. In order to install the replacement filter, screw it into place with a quarter-clockwise turn. When the filter is locked in place, you may hear a pressure noise, which is completely normal.

Step 6: Purge 1 Gallon of Water

1 gallon of water should be sent through the filter. For the first 3-5 seconds, you may hear some air in the lines. This is quite normal. Remove the water from the container. It’s now time to put your water dispenser to work!

Step 7: Reset the Change Water Filter Indicator

By pressing and holding the Crushed Ice button for three seconds, you may reset the Change Water Filter Indicator light. Do you need assistance with the water dispenser or ice maker on your Samsung refrigerator? For Samsung Certified Care on your refrigerator, get in touch with Unique Repair Services.

Samsung Refrigerator Water Filter – Best Buy

Comment from the top: “Great value for these two waterfilters; no, they are not Samsung filters, but they are insignia filters that fit a Samsung refrigerator; approximately 50 dollars for the pair; if I had gotten a Samsung filter, it would have been 50 dollars for one; so yes, great value; would and will buy again.” I bought two waterfilters, which are not Samsungfilters, but they are insigniafilters that fit a Samsung refrigerator, which cost around $50 for the pair, which would have cost me 50 dollars for one if I had purchased the Samsungfilters.”>Read all user reviews

Product Description

If you want to enhance your health, start with the amount of water you consume on a daily basis. The Best Buy basics are as follows: It filters mercury, lead, and other hazardous impurities from water with the BE-SSHQ532 NSF 42/53 Water Filter Replacement for Select Samsung Refrigerators (2-pack). Each filter is NSF-certified to eliminate chlorine while also maintaining the fresh and clean taste of your water for up to six months or 316 gallons. At the same time, they retain vital minerals that contribute to increased flavor.

Furthermore, it is a more affordable alternative to premium manufacturer brands. Keeping yourself and your family hydrated is made easier with water filters that are safe and healthful. See the full range of Refrigerator Water Filters.

Amazon.com: ICEPURE DA29-00020B Samsung Refrigerator Water Filter Replacement for DA29-00020A/B, HAF-CIN/EXP, RF28HFEDBSR, RF263BEAESR, RF263TEAESG, RF28HDEDBSR, HAF-CIN, RF4287HARS,RF4267HARS ,DA97-08006A 3PACK : Appliances

Since 2001, we’ve been purifying and filtering the planet. IcePURE products are verified and approved by reputable organizations in a number of locations across the world. The importance of safe drinking water cannot be overstated. ICEPURE wants to provide every household with a filtering solution that is both remarkable and cost-effective. Professional Certification on an International Scale

  • In 2021, NSF/ANSI 42 will be approved by the National Sanitation Foundation and the International Association of Potable Water Organizations (IAPMO) for the reduction of chlorine in potable water. NSF/ANSI 42 certification has been obtained for the reduction of chlorine. In 2021, we will provide a superb drinking experience for the entire family. In 2021, NSF/ANSI 372 certified by the IAPMO for lead-free material will be available, providing you with a broad variety of protection. In 2021, WAQ IAPMO will be certified to NSF/ANSI 372 for lead-free material, which will assure material safety while providing you with a clean and dependable drinking experience.
See also:  What To Look For When Buying A Water Heater?

Product Description

Refrigerator water filter models that are compatible with this product include: DA29-00020B, DA29-00020A, DA-97-08006A, HAF-CIN, HAF-CIN-EXP, HAF-CINEXP, HAFCIN, 46-9101, RF28HMEDBSR, RF4287HARS, 46-9101, 469101,9101,4609101000 RWF1011, R-9101, RWF1011, WLF-20BN.WFC1401, AB-5698, WF294, EP-2900020B.WD-DA29-00020B.PL-200.CF7.RWF0700A.EFF-6027A.CWMF021.PF7.R-9101,RWF1011, WLF-20BN.WFC1401.AB-5698, WF294.WD-DA29-00020B.PL -P.

RF4287HARS/XAA, RF263TEAESR, RF23J9011SR, RF323TEDBBC, RF323TEDBSR, RFG298HDRS, RS261, RS265, RF4267HABP, RFG297HDPN, RF22K9581SG, RF22KREDBSG, RF22KREDBSR, RF22M9581SG, RF22KREDBSR, RF Please keep in mind that this is a compatible spare part, and that the manufacturer’s names and part numbers have been used solely for the purpose of providing compatibility information.

Samsung Fridge Filters: Easy-Guide to Replacing, Resetting and Changing.

Samsung is one of the most successful corporations in the world today. The South Korean technology corporation, which has its headquarters in Seoul’s Samsung Town, was initially started as a trade company, but it entered the electronics sector in the 1970s after expanding into other markets. Samsung declared in 2015 that it intended to surpass General Electric as the world’s largest appliance manufacturer. To achieve this, as you might expect, the company had to outperform numerous well-known global corporations, like Whirlpool, Bosch, and Electrolux, among others.

  1. Samsung’s collection of home appliances will feature refrigerators that supplied sparkling as well as still, filtered drinking water, making them far more sophisticated than anything else that other household manufacturers were manufacturing at the time.
  2. Samsung is unquestionably one of the world’s biggest appliance manufacturers, despite the fact that they are not exactly at the top of the scoreboard that has just been established.
  3. One of the reasons water tastes so much better when it comes out of a Samsung refrigerator is due to the superior filtering system that the refrigerator has installed.
  4. It is critical that you update your Samsung water filter on a regular basis if you want to continue drinking wonderful water at home.
  5. This will result in terrible tasting drinks that you will be embarrassed to give your friends and family.

We’ve put together a simple tutorial on everything you need to know about replacing your Samsung fridge filter at home so that you can continue to be proud of your great beers, clean water, and crystal-clear ice.

1. How to replace RSG5UCRS Samsung Fridge Filter:

One of the largest corporations in the world, Samsung is headquartered in Seoul, South Korea. The South Korean technology corporation, which has its headquarters in Seoul’s Samsung Town, was initially started as a trade company, but it entered the electronics sector in the 1970s after acquiring a majority stake in a semiconductor company. Aiming to become the world’s largest appliance manufacturer, Samsung declared its intentions in 2015. To achieve this, as you might expect, the company had to outperform numerous well-known multinationals, like Whirlpool, Bosch, and Electrolux, amongst other companies.

  • Samsung’s portfolio of home appliances will include refrigerators that supplied both sparkling and still purified drinking water, which was more sophisticated than anything else that other household manufacturers were manufacturing at the time.
  • Samsung is unquestionably one of the world’s biggest appliance manufacturers, despite the fact that they are not exactly at the top of the scoreboard that has just been formed.
  • One of the reasons water tastes so much better when it comes out of a Samsung refrigerator is due to the superior filtering system that the refrigerator has implemented.
  • Samsung water filters must be replaced at least once a year in order to ensure that wonderful water is consistently available at home.
  • You will be ashamed to serve your guests and family if you do not replace it frequently enough.
  1. The old water filter may be removed by turning it 45 degrees to the left to open it
  2. At this point, gently remove the old water filter and toss it away
  3. The water will stop off automatically at this time. Insert the new water filter into the available area and rotate it 45 degrees to the right
  4. If the padlock symbol on the filter corresponds to the sign on the filter, the filter is in the proper position. Immediately following the installation of the new filter, push the water filter reset button for three seconds to reset the light indicator.

Suggestions for improvement In the event that you are having difficulty removing the water filter, it is possible that there is excessive water pressure behind the filter. Remove the top two refrigerator shelves and use a stronger pull on the filter to get it out. If you are unable to squeeze the new filter into the available area, turn off the water supply valve and dispense a little amount of water. As a result, the pressure will be reduced, making it easier to install the new filter.

All of the steps that follow are for external filters only. In fact, external filters are only found in around 10% of Samsung RSG5UCRS fridge freezers. Instructions on how to change an internal filter may be found further up the page.

  1. Immediately turn off the water supply
  2. Remove the old cartridge from the system and dispose of it properly
  3. The water filter should be positioned such that it flows in the direction of the refrigerator
  4. The inlet and exit tubing should be connected to the proper end of the filter by firmly inserting the tube all the way into the filter until it is snugly shut
  5. Check to see that the tube is square and free of scratches – you may trim it if required. The filter clip should be installed according to the directions in the installation manual. Make sure there are no leaks in the filter by turning on the water. Re-do the installation processes and check again whether there are any leaks. If the leaks continue, remove the filter and contact customer service. Allow water to circulate through the filter for five minutes in order to clean the entire system.

2.How to Replace a DA29-00003F Water Filter

Put a stop to the water flow; Then, disconnect the old cartridge from the system and throw it away. The water filter should be oriented such that it flows in the direction of the refrigerator; The inlet and outlet tubing should be connected to the proper end of the filter by firmly pressing the tubing all the way to the other end until it is tightly sealed. Check the tubing to make sure it is square and free of scratches – you may cut it if required. When it comes to installing the filter clip, refer to the installation manual.

Re-do the installation stages and verify again whether there are any leaks; Removing the filter and contacting assistance is recommended if leaks continue; Allow water to circulate through the filter for five minutes in order to clean the entire system;

  1. The old water filter may be removed by turning it 45 degrees to the left to open it
  2. Gently take it out and throw it away — this will cause the water to cut off automatically
  3. To install the replacement water filter, insert it and rotate it 45 degrees to the right to secure it in place
  4. If the padlock sign on the water filter corresponds to the symbol on the water filter, you have completed the task successfully. To reset the water filter indication, press and hold the water filter reset button for three seconds.

Suggestions for improvement In the event that you are having difficulty removing the water filter, it is possible that there is excessive water pressure behind the filter. Remove the top two refrigerator shelves and use a stronger pull on the filter to get it out. If you are unable to squeeze the new filter into the available area, turn off the water supply valve and dispense a little amount of water. As a result, the pressure will be reduced, making it easier to install the new filter.

3. How to Reset the Water Filter Indicator Light on a Samsung Fridge

In addition to the water filter, every Samsung refrigerator that has one features a water filter indicator that tells you when it’s time to replace the water cartridge. The filter should be replaced once every six months regardless of whether or not the light changes color. This will ensure that you continue to drink the high-quality water that you have come to like. If you don’t change your water filter on a regular basis, it won’t function properly. Instead of drinking great-tasting, clean water, you’ll be forced to drink strange-tasting water that may include unwelcome toxins.

  • Blue indicates that your water filter is performing properly.
  • Red:Your water filter has reached the end of its useful life and it is time to replace it with a new one.
  • By pushing and holding the “Alarm / Hold for 3 seconds to Reset Filter” button for three seconds, you may reset the indicator light.
  • This will return the indicator light to its original blue state.

4. How to Replace a DA29-00003G Samsung Fridge Filter

Instructions for internal filters are provided in the next section. The Samsung DA29-00003G water filter is always installed from inside the device itself.

  1. To remove the old water filter, twist it a quarter turn to the left to free it
  2. Then lift it out. Gently remove the old water filter and throw it away
  3. This will cause the water to be switched off automatically. Insert the new water filter and rotate it by a quarter turn to the right until it is secure. If the padlock sign on the water filter corresponds to the symbol on the water filter, you have successfully installed it. The water filter indication should be reset after installation by pressing the water filter reset button for three seconds after completion.
See also:  How Often To Change Keurig Water Filter?

Suggestions for improvement In the event that you are having difficulty removing the water filter, it is possible that there is excessive water pressure behind the filter. Remove the top two refrigerator shelves and use a stronger pull on the filter to get it out.

If you are unable to squeeze the new filter into the available area, turn off the water supply valve and dispense a little amount of water. As a result, the pressure will be reduced, making it easier to install the new filter.

5. Why You Need to Change Your Fridge Filter Every 6 Months

You might believe that you only need to change your refrigerator filter when the indicator light indicates that you should – but this is not the case. In some cases, waiting until the light goes red might be harmful to your health. A water filter prevents pollutants from flowing through the pipes and into your drinking water supply. When the water filter is no longer functional, all of the impurities that have been caught can now pass through into your drinking water, making it even worse than if you had not used a water filter at all.

Each Samsung water filter contains activated carbon filter material that has been approved for usage with a specific amount of water before the cartridge has to be replaced.

By absorbing impurities from water, activated carbon serves as a filter for such contaminants.

This occurs when there is no more surface area available for the absorption of additional pollutants and the filter’s capacity has been achieved.

How to Replace a Cracked Water Filter Head and Housing in Your Samsung Refrigerator

Though it’s tempting to believe that you only need to replace your refrigerator filter when the indication light indicates that you should, this is not the case. If you keep waiting until the light goes red, it might be hazardous to your health. A water filter prevents pollutants from entering your drinking water from the pipes. Whenever a water filter ceases to be effective, all of the impurities that were previously caught can now leak through into your drinking water, making it even dirtier than if you hadn’t used a water filter at all.

A special activated carbon filter media is used in each Samsung water filter, which is approved for usage with a specific amount of water before the cartridge has to be replaced.

By absorbing pollutants from water, activated carbon serves as a water filter.

The filter’s capacity is achieved when there is no more surface area available for the absorption of additional pollutants.

How to Access The Water Filter Head and Housing in Your Samsung Refrigerator

Located at the bottom of the fresh food compartment of your Samsung refrigerator, the water filter head and housing are made of stainless steel. To gain access to the part, open the refrigerator door and take the shelves and bins out of the way. Upon completion of the fresh food area, you’ll be able to see the dwelling, which is located close to its floor and along one of the compartment’s right-side walls.

You may now examine the housing to see if there is any obvious damage to it. If you discover any cracks, you may begin the process of replacing them.

How to Uninstall The Water Filter Head and Housing in Your Samsung Refrigerator

First, you’ll need to take out the water filter from the front of the component before you can remove the screws that hold the housing to the refrigerator. Remove the filter by rotating it counter-clockwise until it pops out, then pulling it forward to remove it from its position. When moving the water filter, make sure to maintain it upright; otherwise, you’ll wind up with water leaking all over your floor. Using your Phillips screwdriver to loosen the screw that holds the housing of your refrigerator’s filter to its side wall, you may now remove the filter housing from the refrigerator’s wall.

  • You’ll need to remove the kick plate off the front of your refrigerator at this point by unthreading the screws that keep it in place.
  • The water lines that lead to the water and ice dispensers, as well as the water filter head and housing, are all located behind the kick plate of the refrigerator.
  • Make use of your flat-head screwdriver to take off the safety caps that are attached to the bottom of the couplings.
  • Remove the coupling and take out the water lines that are connected to the filter head and housing by pressing the locking mechanism on the bottom of the coupling.
  • Disconnect the water lines that go to the water inlet valve, which is situated beneath the refrigerator’s rear access panel.
  • After you’ve completed this step, you may remove the rear access panel from the vehicle.
  • The first step is to release the nut that holds the water line in place on top of the inlet valve.
  • It is necessary to remove the water inlet valve from the refrigerator in order to separate the other two water lines from the refrigerator.
  • Remove the locking rings that are located between the valve and the water lines in order to disconnect the water lines from the valve.
  • If the water lines are protected by tubing, remove it by sliding it off the lines.

The water lines that are linked to the back of the housing should be able to easily slide out of the hole in the rear wall, and the water lines that are connected to the ice maker and water dispenser should be able to readily slide out of the opening in the floor of the housing.

How to Install a New Water Filter Head and Housing in Your Samsung Refrigerator

Begin by feeding the water lines through the holes in the rear wall and floor of your refrigerator to complete the installation. Then, pressing the filter head and housing against the wall, reattach the screw that keeps the filter head and housing together. The water lines at the front of your appliance should be connected to the lines that supply water to the ice maker and water dispenser. Make care to begin by re-attaching the safety caps to the lines before proceeding. After that, connect the water lines to the couplings that are already connected to the ice maker and water dispenser lines.

  1. Reinstall the kick plate to complete the project.
  2. Install the cover and brackets that you removed during the dismantling procedure and then fasten the lines to the back of your refrigerator by placing them on the rear of the refrigerator in the right sequence.
  3. Then, connect the lines to the water inlet valve and close the valve.
  4. Once the lines are properly secured, reconnect the locking collars to ensure that the lines do not come undone during transportation.
  5. Reattach the remaining water line to the top of the inlet valve once the inlet valve has been properly installed.
  6. Make your way to the front of your refrigerator and place the water filter into its housing.
  7. Finally, replace your refrigerator shelf before reconnecting the appliance to the wall and turning on the water supply to the appliance.

Samsung Refrigerator Water Filters – Buy Samsung Filter Replacements

Technology industry leader Samsung has been manufacturing high-quality electronics and white goods for decades. The firm continues to innovate and develop products that are focused on the needs of its customers to make their lives simpler. Samsung refrigerators are equipped with the most up-to-date technological advances and gadgets that help to keep your produce fresher and your water pure. Water filters manufactured by Samsung employ high-grade activated carbon block filtration, which not only eliminates bacteria, viruses, and other impurities but also removes chlorine tastes and smells, resulting in consistently clean and fresh water.

This allows you to drink with confidence knowing that your drinking water is of the highest quality.

Among the Samsung filters we provide are those that employ carbon block filtration and can create up to half a gallon of pure, fresh water every minute, ensuring that your family has access to clean drinking water whenever they need it.

Samsung is always developing and improving its products.

These filters may be used to replace any older-style filters from previous model refrigeration systems, allowing you to be confident that your filter is always operating at peak performance.

Lastly, in order to fit the diverse range of designs and design elements found in Samsung refrigerators and freezers, we offer a selection of the most up to current top-mounted refrigerator water filters, which can provide an astonishing 0.75 gallons of water per minute.

In the event that your Samsung refrigerator water filter has to be replaced, you’ve come to the perfect spot. We have the greatest selection of Samsung water filters here at Water Filters Fast, ensuring that you can continue to enjoy fresh, clean water.

Leave a Reply

Your email address will not be published.