How To Hide Water Heater

How to Hide Your Ugly Water Heater

Please note that the water heater featured in this post is electric. It has been brought to my attention that this might cause a fire hazard with gas water heaters. I’m not familiar with gas water heaters or the safety measures that should be taken while using one of these appliances. As a result, before embarking on this project, seek expert advice to determine whether it is appropriate for your particular use. Compliments are always appreciated, don’t you think? They have the ability to completely alter the course of events.

“Who do you think I am?

*flips it around the back of my neck* * Why, thank you very much!

Has anybody ever expressed appreciation for your hot water heater?

  • Really?
  • Do you think it’s because it’s a tiny bit little sort of possibly.um.UGLY, or something else?
  • I mean, it’s simply in the nature of the beast.
  • The fact is, neither I nor you have a very attractive one.
  • (Even though the tankless ones are far more appealing than the huge ones with tanks.they are also significantly more expensive.) As a matter of fact, my middle name is “cheap.” No, not in the traditional sense.
  • However, it could as well be inexpensive.) Despite their obnoxious appearance, we must take a moment to appreciate what a water heater is capable of accomplishing.
  • That’s a big thing, to be honest.

Most people didn’t have access to electricity, and the ground was completely coated in ice.

After three days, I’d had enough and needed to take a shower regardless of whether or not there was hot water available.

That’ll make you love your water heater even more.

We can’t just throw them away because they’re unattractive.

Moreover, guess what?

Here’s how to create a water heater cover from scratch.

It’s easily detachable for rapid access in the event of a leak that requires immediate attention.

I’m afraid I won’t be able to provide you specific measurements because everything will depend on your individual application.

My water heater is a tall and slender figure.

The images below were taken during the time I produced that particular piece.

First, I cut four 1x4s for the “legs” of the structure.

After that, I cut four short pieces of 14-inch plywood.

Using your Kreg Jig –affiliate link–, you will need to drill pocket holes in them, just like the photo below illustrates.

After that, I grabbed some luan (which is essentially inexpensive 1″ plywood) and cut two pieces to fit inside the frames using a miter saw.

It is necessary to have some overlap in order to staple or nail them down.

If you choose, you can substitute cloth for the luan if you so desire.

Either option is acceptable for concealing the heater.

I used pocket screws to attach the two panels together on the wall.

At this moment, you have two choices in front of you.

However, if you have the room for an additional leg, I would recommend putting it in for support.

To make the extra leg, I cut another 14 that was the same length as the other legs, as well as a shorter 14 that was the same length as the frames.

You may now finish by adding the top.

Use plywood or boards to support the extra leg if you were successful in doing so.

For the top, I used a nail to secure them in place.

It’s now ready to be painted or stained, or you can simply leave it unfinished.

Everything is as simple as setting it in position.

By simply placing it in position, it makes it simple to remove in the event that you need to get to your heater.

(PS: If you like what you see here, make sure to check out my whole laundry room renovation).

As a matter of fact, it’s become one of my favorite spaces in the house. Then, what exactly are you waiting for?! Get into the building—you’ve got a water heater to conceal! Do not forget to save this for later!

4 Ways to Hide Your Water Heater (& 3 Outdoor Options)

Are you looking for ways to conceal an unsightly water heater? A tank-style gas or electric water heater has a life expectancy of between 8 and 12 years, depending on the manufacturer’s recommended service life. That’s a long period of time to be forced to gaze at an unattractive water heater! As a result, it would be ideal if you had a dedicated storage space for it. Furthermore, some hot water heaters are not particularly aesthetically beautiful, which might detract from the overall appearance of your home.

This includes the following:

  • Install a decorative screen or room divider to conceal it
  • Place your water heater in a closet
  • Or construct a cabinet enclosure to conceal it.

The size of the water heater will determine which option you will select. They may contain anything from 20 to 120 gallons of water, with the majority of houses having a 50-gallon water heater. You will learn how to conceal your water heater in the next sections of this article.

How to Enclose a Water Heater?

When it comes to enclosing your water heater, you must decide whether you want a total enclosure or whether you prefer a partial or moderate amount of coverage.

1. Curtains are a Budget-Friendly Option

Choosing between a complete enclosure and a partial or moderate covering choice for your water heater is important when enclosing your water heater.

2. Incorporate a Screen or Room Divider

Due to the fact that they do not completely surround the water heater, these solutions are more like coverings. Generally speaking, there are two types of water heater covers. Curtains or screens are used to cover the windows. A simple screen may do wonders in terms of keeping the water heater out of sight from the general public. Because ornamental displays might draw attention, you might choose a more straightforward screen. Contrary to curtains, which people associate with seclusion, elegant screens draw attention and compel others to examine them since they appear to be a part of the furniture itself.

Room dividers and screens are simple to install and reasonably priced.

3. Build a Closet

Water heaters are housed in customized closets that provide a complete unit enclosure. Create a customized closet based on the measurements of the unit you are working with. The closet will undoubtedly appear out of place if it is located in a high-traffic area of your home, and this must be taken into consideration. It is possible for the closet to appear planned and contrived. Don’t forget that the main idea of concealing your water heater is to make it more discrete and in keeping with the general design of your room.

In the laundry room, basement, or even in the kitchen are some examples of where you may put it. It is more durable to utilize a closet, and you may lock it to prevent the heater from posing a danger to anybody in the house.

4. Build a Custom Cabinet

Cabinets are more discrete than closets since they are smaller. They become a little more adaptable in terms of where they may be placed without being an eyesore as a result. An unfinished basement or a kitchen are both suitable locations for cabinets, which can be either recessed or freestanding. Although a hardwood cabinet is available for purchase, many individuals choose to utilize an all-metal unit instead. They are long-lasting, and they make greater use of available space. You may even build a water heater cabinet that you can store in a closet for further security and safety.

Other Options to Make Your Water Heater Less Noticeable

In comparison to closets, cabinets are smaller and less noticeable. The fact that they are smaller allows you to put them in more places without them seeming out of place. An unfinished basement or a kitchen are both suitable locations for cabinets, which can be either recessed or free-standing. Although a hardwood cabinet is available for purchase, many people choose to utilize an all-metal version since it is more durable. Durable and efficient in terms of space use, they are a good choice.

  1. Cabinet enclosure for the home or office Enclosure for outdoor cabinet It is possible to have the heater incorporated into the wall in order to keep it out of sight.
  2. This is a notion that is recognizable to those who work in commercial buildings or hotels.
  3. The primary difficulty with this scenario is that any damage to the heater might cause the wall to become unstable without you even realizing it.
  4. Consider this a reverse closet, in which the water heater is housed in an internal closet but the door is located on the exterior of the building.
  5. Outdoor tankless water heaters operate on a gas-fueled burner system that heats water immediately when the faucet is turned on.
  6. Consequently, cold water enters the tank by a dip tube, where it is heated and stored until the hot water tap is turned on.
  7. A tankless water heater is an excellent choice for a small area.

What to Consider When Hiding Your Water Heater

When it comes to concealing an unattractive water heater, it’s always vital to think about the aesthetics of the situation first.

You should take care to verify that the enclosure is not visible, poor, or untidy before using it.

2. Safety

If you’re attempting to conceal an unattractive water heater, it’s always necessary to start with the aesthetics. If the enclosure is visible, poor, or unclean, you should take precautions to avoid being sued.

3. Plumbing

Perform sure that the pipes going to the water heater are disguised but yet easily accessible in case you need to make plumbing repairs if you decide to create a bespoke enclosure.

4. Cost

Choose a pre-fabricated enclosure that is strong enough to resist the weather if you do not want to build one from scratch. Outdoor enclosures are often more expensive than interior enclosures, mostly due to the fact that the materials used to construct the enclosure must be weather-resistant. The good news is that concealing an unsightly water heater does not have to be a costly endeavor. Choose a curtain or screen rather than an enclosure and you will save a significant amount of money on your project costs.

You can build a screen at a reasonable price using inexpensive panels.

A closet or cabinet does not have to be expensive to be functional.

5. Accessibility

When concealing a water heater, it is vital that it be easily accessible. In the event that you are without hot water, you should be able to get to it for water heater maintenance or to make repairs.

6. Location

Another significant element to consider is the location of the business. A water heater may not be permitted to be installed within a condominium complex, for example. Because most condominiums do not require huge tanks, low-boy design tanks are commonly used. Low-boy type units may also be used in kitchens and laundry rooms since they fit under the cabinetry. Choose a position that is close to the kitchen and bathrooms so that hot water can be delivered to these areas as quickly as possible.

7. Durability

The material you chose should provide you with a reasonable number of years of service. That is one of the reasons why most homeowners prefer outside steel enclosures. It is recommended that you use treated or decay-resistant wood when constructing an outdoor wood enclosure, as well as to paint the enclosure.

Conclusion

Keeping the water heater hidden It’s acceptable if you do it with the proper materials, in the proper location, and with the assistance of a professional. However, because many people do not adhere to construction code standards or utilize low-cost materials, the procedure is frequently viewed as a curse by others. When some people decide to take on a DIY project, they often end up ruining it and being stuck with an eyesore of a cabinet or closet in the most visible locations. It is generally recommended that you hire a professional to correctly enclose your water heaters.

Sources: Some Practical Guidelines for Hiding Your Water Heater in Your Home How to Install a Water Heater Enclosure DISCLAIMER: The information provided on HomeInspectionInsider.com is not intended to be professional advice.

It is owned and operated by Hubert Miles who is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by placing advertisements and links on their websites that direct traffic to Amazon.com (hereinafter referred to as “Amazon.com” or “Amazon.com Associates Program”).

As an affiliate, HomeInspectionInsider.com participates in a variety of affiliate programs with other websites. Hubert Miles receives a commission for recommending visitors and commerce to these businesses.

Hide a Hot Water Heater

Several years ago, I renovated my laundry room and devised a plan for concealing our hot water heater, which I shared with my husband. However, users are continuously searching for the information on my blog and requesting that I re-post it as our family has now sold our house, and I have updated my site as a result. So, here is an extremely shortened version of the laundry room redesign that I completed for the Spring 2017 One Room Challenge, which includes my DIY water heater cover that I created.

See also:  What Size Water Heater Do I Need For A Jacuzzi Tub?

If you want to remain in your house for an extended period of time, you may want to consider getting a tankless hot water heater or relocating your existing hot water tank.

Ideas for Hiding a Hot Water Heater

  1. Add a Closet to Your Home If you have the necessary room, you may hire a contractor to put up drywall and install a door for you. In the event that your home requires plumbing maintenance, one advantage of having a closet is that you will always be able to reach the hot water heater quickly and conveniently. This is also the most likely choice for reselling your property in the future. If you don’t want to pay a contractor, the blogTwelve on Mainhas a great instructions for building a beautiful shiplap closet that you can follow yourself. Even though this closet takes up less space than a dry wall closet, it provides the convenience of a door for access. Make a Hot Water Cover or a Hot Water Cabinet. If you want something that is less permanent than a closet, building a cabinet is an excellent solution. Step-by-step instructions for building a wooden cabinet to conceal your hot water heater may be found on the blog Woodshop Diaries
  2. Curtains should be hung Though this is a cost-effective alternative, it is not always a good match for the décor
  3. Nonetheless, there are some instances where it may be a good match for the decor. Make use of a screen or a room divider. After conducting some research, I came up with the idea of using a simple screen to conceal my hot water heater. It was important to me that the solution be quick, simple, and affordable because I am not particularly skilled with tools.

How to Hide a Hot Water Heater with a DIY Screen

The very first thing I did was gather all of my materials and equipment. I had nails, a hammer, staples, and a staple gun on hand to complete the project. After that, I made the following purchases: a total of six furring strips, which are essentially pieces of wood measuring 1 2 3 4 inches by 8 inches by 8, fabric, two hinges, and white spray paint I was pleasantly delighted to see that I was able to construct the screen for less than $20! If you use a low-cost fabric for this craft, it will be fairly inexpensive overall.

  1. After cutting the furring strips, I sprayed them with white spray paint.
  2. It was unnecessary for me to utilize pocket holes because I am novice with power tools and DIY projects.
  3. Last but not least, I used hinges to join each frame together.
  4. This proved to be really beneficial because we had multiple situations were plumbers were required to switch off our water immediately.
  5. I would also recommend consulting with a number of pros regarding your unique project in order to prevent creating a danger that might cause a fire.
  6. I utilized it from 2017 till 2019, when my family and I moved out of our house.

Spring 2017 One Room Challenge

In case you’re unfamiliar with the One Room Challenge, it is a biennial event when 20 prominent designers and hundreds of guest bloggers come together to fully change a room in 6 weeks.

My laundry room needed to be transformed into a more usable place, so I set myself the task in the spring of 2017.

Before

While I was quite grateful to have a functional laundry room, there were numerous features of the area that I had had been different in my opinion.

  1. I wanted to put a cover over my hot water heater, but I couldn’t. My laundry room needed more space for hampers so that I could arrange my dirty clothes and divide them into loads
  2. I wanted to paint the yellow walls white
  3. I wanted to replace the carpet.

ORC Week 2

The first thing I did was just clear out the laundry room and paint it a bright white color to start off with. It had already made a significant difference.

ORC Week 3

The first thing I did was just clear out the laundry room and paint it a bright white color to start with. In and of itself, it was a significant step forward.

ORC Week 4

Over the course of the fourth week, I concealed my hot water heater with the ornamental water heater cover that I previously mentioned.

ORC Week 5

During the fifth week, I removed the old vinyl flooring and replaced it with new white vinyl floor tiles. Besides that, I bought a woven vinyl rug and gathered decorative objects for the final week of the project.

ORC Week 6

The space behind the washer and dryer has been blocked off with a ledge that I created during the previous week. Plants and containers for washing detergent and dryer sheets were added to the mix. Aside from that, I made a DIY letter board and hung one of my fave Elisabeth Elliot statements on work on it:)

ORC Laundry Room Reveal Pictures

The space behind the washer and dryer has been blocked off with a ledge that I constructed during the previous week. Plants and containers for washing detergent and dryer sheets were added to my home decor. Along with that, I made a DIY letter board and framed it with one of my favorite Elisabeth Elliot statements on work.

DIY Ways to Hide Your Ugly Water Heater

Yes, it is true that your water heater is not the most visually appealing item in your home. Your family, on the other hand, is really grateful for it when it comes to its utilization. Why not look for methods to make the room more visually attractive while also eliminating the eyesore? There are a plethora of do-it-yourself options for concealing your unsightly water heater! Keep in mind that items should never be placed too near to water heaters, as this can block ventilation and create a potential fire hazard.

Curtain Covers

You can cover your unsightly water heater with this simple solution that takes only a few minutes to complete. Simply install a curtain rod and a curtain that is long enough to reach from floor to ceiling and touch. If servicing is required, you won’t have to worry about being unable to use your computer because of this rapid patch.

Faux Cabinets

If you already have cabinetry near your water heater, you can simply add a few false cabinets to extend the length of the cabinetry past the water heater. This will allow for optimal mobility throughout your room and will also eliminate the eye ache completely! Even if you don’t already have cabinets nearby, it’s simple to construct a fictitious cabinet to go around it. You may stain or paint the cabinet to fit the color scheme of the space!

Room Dividers

Room dividers are an extremely simple and virtually painless option to conceal an unsightly water heater.

Simply installing a stylish room divider can do the trick in minutes. The items mentioned above may be found at practically any home or design store. Simple as taking the divider out of the box and putting it up on its own, voila! It’s simple and painless!

Plantation Shutters

Plantation shutters are a simple and inexpensive method to add texture and beauty to any room in your home. Shutters can be hinged and custom-built to fit certain openings. The use of hinged shutters also ensures that the space remains conveniently accessible. In addition to ensuring that the space is still accessible, the gaps in the shutters will also ensure that sufficient air movement is maintained.

Pallets

Pallet this and pallet that are now popular on Pinterest. So why not use a little bit of it to cover over an unsightly water heater? In terms of hiding this enormous piece of equipment, there are several pallet solutions available on Pinterest. A beautiful shelf and other creative items, such as those seen in the image below, can be added as well. Hopefully, after seeing a few different DIY water heater concealment options, you’ll feel more confidence in implementing some of them in your own house!

BELOMAN has been in business in the Metro East for more than 60 years.

In Illinois, we are the most trusted name in home comfort.

Hide An Unsightly Water Heater

When I was planning my laundry room redesign, there was one thing that was at the top of my priority list: a new sink. Hide a water heater that is unattractive. I suppose you could say that while we were building our house, we could have done a better job of planning ahead of time. We had this unsightly tankless water heater hanging out in the center of the wall before we even realized it. My laundry room was filled with nothing but that awful stuff every time I glanced in there. I suppose I should be happy that it was a tankless water heater rather than a traditional one.

Hide an unsightly water heater:

THE PLAN: We needed to find a solution to disguise our water heater and water softener, so we devised a plan. I considered a few various options, like hanging a curtain and constructing a pegboard screen, but none of them achieved the permanent and inconspicuous appearance I was aiming for. I want for them to vanish completely. I wanted to make sure they were sufficiently hidden so that anyone entering the room would not be able to tell there was any screening or concealing materials in place.

  1. It would give the impression that it was done on purpose, as if it were a natural condition of the room rather than a stealthy concealed compartment.
  2. What’s the deal with that massive water softener?
  3. We began by constructing a wall that would divide the room and serve as a partition between it and the closet.
  4. Using screws, we fastened it to the floor joists in the ceiling, then bored holes in the concrete floor and bolted it in place.
  5. The next stage was to attach plywood to the framed wall to provide additional stability as well as something to which the shiplap could be affixed.
  6. We next moved on to the closet door, which took a little longer to complete.
  7. We didn’t want this door to be too hefty, so we made it a little smaller.

My husband forced me to hold the door open as he screwed it into the wall behind me.

This is one of the very few occasions when I will include myself in a photograph.

In order to hold it up, we utilized these hinges, which are comparable to door hinges.

In order to add a piece of trim that would overhang the wall and create a seamless effect, we purposefully made this mistake.

Here’s a comparison of the before and after of the corner.

Do you believe I was successful in my attempt to conceal an unattractive water heater?

It is precisely as I had hoped it would be when I first imagined it.

He’s just fantastic.

Don’t accept what you believe you are obligated to accept.

All of these activities are doable on a tight budget.

With only three pieces of plywood, eight 2by4 studs, some paint, and hardware, this room was totally changed at a reasonable price.

Thank you for taking the time to come by Twelve On Main and check what was going on there.

Have a wonderful day and keep in mind. If you enjoyed this post, you’ll probably enjoy these as well: Barn Doors Made of Bleached Wood Reveal of the Farmhouse Laundry Room as part of the One Room Challenge! How I Made Reclaimed Wood Shelves (with Pictures)

GET YOUR FREE GUIDE to 30 DIY projects that can be done over the weekend!

By subscribing, you will receive instant access to my FREE guide, which contains 30 DIY projects that can be completed in a single day or over the course of a weekend! In addition, you will receive a weekly email with some of my favorite design tips, tactics, and inspiration.

See also:  How To Remove Water Pump Pulley Without Puller?

How to Hide a Water Heater

Documentation Download Documentation Download Documentation There are several methods to conceal a water heater if it is visible from the rest of your room, but there are a few that are very attractive. In the case of a straightforward solution, a room divider may easily be used to obscure your view of the water heater. Curtains draped from your ceiling can also serve as a light and inexpensive alternative to blinds. Building a cabinet around your water heater not only helps to keep it hidden, but it also provides you with an additional shelf of storage.

  1. 1 Take the height of your water heater into consideration. Start at the bottom of your water heater and stretch your measuring tape all the way up to the top of the water heater to get the whole height of the water heater. If you wish to conceal any pipes that reach up and out from the top of the water heater, make sure to include the height of those pipes as well. To ensure that you do not forget your measurement, write it down as soon as it is taken.
  • Additionally, you may measure the width and depth of the water heater, although these measures are not as critical as the height because you can modify the length of a room divider.
  • Additionally, you may measure the width and depth of the water heater, although these measures are not as critical as the height because you can modify the length of a room divider
  • Nonetheless,
  • If you are unable to locate a room divider that is large enough to entirely conceal the water heater, you may need to purchase more than one. Room dividers may be constructed from a variety of materials and in a variety of styles. Choose the one that best suits your needs and available space.
  1. Advertisement
  2. s3 The room divider should be placed around your water heater. Place the room divider on its side and pull the panels apart to prevent it from falling over. Placing the divider approximately 6 inches (15 cm) in front of the water heater so that one edge of the divider is flush on the wall. Make an extension of the divider by pulling it to the other end and wrapping it around the water heater until you can’t see it any more. You can easily reach the water heater by pushing the partition up against the wall whenever you need to. Warning: Do not place the divider against a gas water heater, as this might result in a fire. Advertisement
  1. Advertisement
  2. s3 Room dividers may be used to create a protective barrier around your hot water heater. Pulling away the panels of the room divider will prevent it from falling down. In order for one edge of the divider to be against the wall, it should be roughly 6 inches (15 cm) in front of the water heater. Make an extension of the divider by pulling it to the other end and wrapping it around the water heater until you can no longer see it. You can easily reach the water heater by pushing the partition up against the wall whenever you need to. A word of caution: Avoid placing the divider against a gas water heater, since this might cause a fire. Advertisement
  • Install your curtain so that it does not come into direct contact with the water heater, since this might provide a fire threat.
  • Calculate the height of your ceiling in steps two and three. To measure from the floor near your water heater to the ceiling, start at the bottom of the tape measure and draw it straight up. Make certain that the measuring tape is absolutely vertical, otherwise your measurement will be incorrect. Make a note of your measurement so that you don’t forget it and so that you know how long your curtain should be. 3 Purchase ceiling curtain track that is the same length as the combined width and depth of the room’s windows. With a curtain track, you may hang a curtain from the ceiling, and it is made of metal. Purchase a piece of track to be installed directly on your ceiling that is the same length and breadth as the measurements you measured before. To have your drape completely wrap around the water heater, make sure to purchase angled corner portions of track as well.
  • Curtain tracks can be purchased at home improvement stores or online. If you are unable to get the precise length that you want, you can cut the track to size with a hacksaw.
  • 4Another option is to screw a piece of curtain track to the ceiling. Placing the end of the first track portion against the wall such that it stretches out past your water heater will be the most effective solution. Check to see that the track on the ceiling is not misaligned before inserting screws into the holes along its length. Make use of an electric screwdriver to tighten the screws and ensure that the track remains in position. When screwing into drywall, use anchors first to prevent the track from falling out of position
  • Otherwise, use screws to hold the track in place. 5 Attach the curtain hooks to the first piece of track by sliding them on. Make certain that the curtain glider hooks you use are the same width as your track. Push the hook’s round end into the track and slide them all the way to the finish. Immediately attach as many curtain hooks as you require for your curtain, as it becomes more difficult to attach hooks to track after you finish the remainder of the track.
  • Curtain glider hooks can be purchased at home improvement stores or on the internet. Hooks are available in a variety of sizes and designs. Purchase hooks that are the same color as the hardware in the rest of your room so that they don’t stick out as much.
  • 6 Complete the installation of the remaining curtain track. Ensure that the tracks on the ceiling completely encircle your water heater before installing them. Hold the track pieces up against the ceiling and insert screws into the holes along their whole lengths to complete the installation. Before using your electric screwdriver to secure the ends of the track in place, make sure they are aligned with the component you previously placed.
  • In the event that your curtain needs to wrap around a corner, you may need to utilize an angled piece of track.
  • In the event that your curtain needs to wrap around a corner, you may need to utilize an angled piece of track
  • Purchase a curtain that is complementary to the other types in your space so that it does not stick out or clash
  • Even if your curtain is a little bit taller than you require, it is quite OK since you can reduce it using hem tape.
  1. 1Take measurements for the water heater’s height, breadth, and depth. Place your tape measure on the floor beneath your water heater and stretch the tape measure all the way up to the top edge of the water heater. Then take a measurement of how far your water heater reaches out from each of the adjacent walls. Add approximately 2–3 inches (5.1–7.6 cm) to each dimension to ensure that you have enough space around the heater to move around. Make a note of your dimensions so that you don’t forget them later. 2 Cut 1 in. x 4 in. (2.5 cm x 10.2 cm) boards to the lengths and widths you want. Get enough 1 in. x 4 in. (2.5 cm x 10.2 cm) timber to cut out 5 pieces that are the same height as your measurement, 3 pieces that are the same width as your measurement, and 2 pieces that are the same depth as your measurement. Place your boards on a strong work surface so that the piece you’re cutting hangs over the edge of the table. Holding the wood in place with your nondominant hand while cutting through the pieces with a handsaw is an excellent technique.
  • Using the example above, if the cabinet’s measurements are 50 by 18 by 18 inches (127 by 46 cm), you’ll need 5 parts that are 50 inches (130 cm) long, 3 pieces that are 18 inches (46 cm), and 2 pieces that are 18 inches (46 cm)
  • This cabinet is intended for use in conjunction with a water heater that is located in the corner. If your water heater isn’t in a corner, you’ll need 6 pieces that are the same height as the water heater, 4 pieces that are the same width as the water heater, and 2 pieces that are the same depth as the water heater.
  • 3 Assemble the boards into two rectangular frames for your cabinet using the glue and nails. 2 boards for the height of your cabinet and 2 boards for the width of your cabinet should be laid out perpendicularly between them. Check to see that the length of the top board is flush with the end of the board on the side of the table. The second board should be 3–4 inches (7.6–10.2 cm) apart from the bottom of the side pieces when they are assembled. To construct a rectangle frame with two legs protruding from the bottom, screw the components together with a screwdriver. Carry on using same procedure for the other frame piece.
  • If you’re using a gas water heater, make sure there’s enough space between the bottom of the board and the floor
  • Otherwise, a buildup of hazardous gas might occur. These frames are designed to fit around a water heater that is located in the corner of a room. If your water heater isn’t in a corner, you’ll need to create three frames instead.
  • 4 Plywood should be used to cover the broad central part. After you’ve finished assembling the frame, measure the inner window of each panel and add 1 inch (2.5 cm) to each side of the measurement. Using a handsaw or an atable saw, cut pieces of 1 4 inch (0.64 cm) plywood to the desired size. Place the panel on one side of the frame and staple it to the plywood along the perimeter of the panel. Maintain the integrity of the edge by placing staples every 2 inches (5.1 cm) throughout the length of the edge
  • If you want your cabinet to have a more beautiful appearance, you may also use fabric.
  • 5 Using the corner screws, join the frames together to form an L-shape. Placing the frames upright on their legs and arranging them so that they create a straight angle is the first step. To ensure that the wood parts do not move, clamp them together using clamps and then screw them together. A screw should be placed every 4–5 inches (10–13 cm) to ensure that the cabinet doesn’t come apart.
  • If your water heater is not in a corner, you may build a U-shape out of your cabinet by adding a third frame to it.
  • If your water heater isn’t in a corner, you may build a U-shape out of your cabinet by adding a third frame to the back of it.
  • Even if you don’t want to use an additional leg, you should avoid storing heavy objects on top of the cabinet. If you’re building a cabinet with three sides, you don’t need to include an additional support leg.
  • 7 Attach plywood or wood planks to the top of the cabinet using nails. Measure the top of your cabinet to determine the measurements of the top piece that will be cut off. Either a series of 1 in. x 4 in. (2.5 cm x 10.2 cm) boards or a single sheet of plywood can be used to construct this structure. Using a circular saw, cut the pieces to size and nail them together every 4 inches (10 cm) along the edge of the cabinet to secure the top piece
  • Make certain that the top of your cabinet does not come into contact with any pipes, otherwise it may not fit well in the area.
  • 8 To conceal your water heater, slide the cabinet over it from above. Make sure the open end of the cabinet is towards the water heater and that the two paneled sides of the cabinet are facing out. Continue to slowly lift your cabinet over the water heater. The boards or plywood you placed on top of the cabinet may be used to create a shelf to hold goods in the room
  • Consider the following scenario: if your water heater cabinet is in the laundry area, you might want to place detergents and washing supplies on the top shelf.
See also:  What Size Breaker For 50 Gallon Water Heater?

Inquire about something There are 200 characters remaining. Include your email address so that you may be notified when this question has been resolved. SubmitAdvertisement Thank you for submitting a suggestion for consideration!

  • Inquire about a problem a total of 200 characters are still available Fill up the blanks with your email address to be notified when your query is answered. SubmitAdvertisement Your suggestion has been received and will be considered.

Advertisement

Things You’ll Need

  • Cutting tape
  • Ceiling curtain track
  • Electric screwdriver
  • Curtain hooks
  • Floor-length curtain
  • Measuring tape
  • Planks of plywood, 1 in x 4 in (2.5 cm x 10.2 cm) boards, a hand saw, a measuring tape, wood screws, a cordless screwdriver, wood staples, a stapler, nails, a hammer

About This Article

Thank you to all writers for contributing to this page, which has been read 51,719 times so far.

Did this article help you?

If we are talking about our homes, water heaters are without a doubt an absolute necessity. These facilities supply hot and clean water for a variety of applications throughout the harsh winter months. When installing a concealed water heater, there are a few considerations that must be taken into consideration. They have the potential to become a major eyesore and detract from the overall attractiveness of your property. Spending hundreds or even thousands of dollars on your finest tankless water heater will be wasted if they wind up being an eyesore in your home.

  • The procedure, however, must be carried out with care so that the efficiency and functioning of the water heaters are not adversely affected.
  • Getting the Fundamentals Right When it comes to concealing your water heater, it’s critical that you get the fundamentals right the first time.
  • Before you purchase a water heater, you should ask yourself a few simple questions.
  • This will assist you in devising the most appropriate strategy for concealing the water heater from plain sight without impairing its efficiency or undermining the reason for which it is being employed.
  • This is something that should be considered before to the construction of the house.
  • A Cloth or a Pegboard Screen Can Be Used If you take a look around, you may find a variety of choices for concealing the water heater.
  • Your approach for hiding the water heater should be failsafe, practical, and workable from an overall perspective over time.

However, in the majority of situations, these suggestions are at best temporary solutions.

A closet might be used for this purpose.

This might be covered in shiplap to make it more in keeping with the general theme of the room.

It may have the appearance of a covert hiding place that youngsters could utilize while they were playing.

Choosing a Tankless Water Heater The next best choice could be to invest in a tankless water heater instead.

Also necessary would be the installation of a cabinet door, without which the space would continue to seem shabby.

This is something you may learn from manyrinnai tankless water heater reviews to help you have a better understanding of.

If at all possible, keep it outside the house.

Even though this may be a costly idea, it may be worthwhile to give it some serious consideration.

The pipe and plumbing system will very definitely require more expenditures, but once completed, the kitchen or bathroom will almost certainly be a considerably more attractive location to be in terms of appearance.

You will, however, need to select the appropriate technology and determine whether you want to use an infrared sauna or a regular sauna as a treatment option.

Make an attempt to construct it within the walls.

However, you might be astonished to find hot water gushing out of the numerous faucets as you go about the house.

This, however, is done with care to guarantee that the heaters may be removed as and when they are required for repairs or even replacement as necessary.

They could have camouflaged walls put on wooden doors, and the finish would be so beautiful that it would be hard to tell that this is the location where the water heater has been repaired with the naked eye.

Keep the following points in mind as you go about your attempt to achieve this goal: It is necessary to be cost-effective as well as practical, and it must not compromise the efficiency of the performance of these water heaters at the end of the day, failing which the primary goal of such camouflaging activities will be defeated.

Every situation is different, and the advantages and disadvantages must be carefully weighed against one another.

Her writing and research interests include a variety of do-it-yourself issues such as home improvement/interior design, health/fitness, and other related topics.

She is also working on her PhD thesis, which focuses on the theme of intelligent houses. A home decor designer who also blogs and has an online home décor business where she sells one-of-a-kind products created by local craftsmen and artists from nations along the old Silk Route.

DIY Water Heater Covers (5 Different Kinds)

You’ve grown tired of staring at your obnoxious water heater. Do you think it detracts from the overall look of your home? Water heaters are a fantastic piece of engineering. Water heaters, on the other hand, do not have a fashionable appearance, unlike many other modern equipment. It was 1868 that the first water heater was invented, and the aesthetics haven’t altered much since then. The environment in which we live should be pleasing to the eye and comfortable to inhabit. However, because we are unable to prevent the installation of an unsightly but necessary water heater, our best alternative is to conceal it.

Five Different DIY Water Heater Covers

We’ve gathered all of the knowledge you’ll need to protect your water heater both successfully and stylishly in our research. The following are the most widely used and successful remedies.

1.Curtains

  • Basements or garages that are exclusively used for storage work best in this situation.
  • Kitchens, completed basements, and bedrooms are the worst places to get mold.

Curtains are the most affordable and straightforward technique of concealing your water heater. They are simple to install and are available in a plethora of designs. Aside from that, if you get dissatisfied with the design, it is simple to swap them out for other ones. All that is required is the purchase and installation of a curtain rod that is appropriate for the area to be covered. If you like a more subdued appearance, use a curtain fabric that complements the surrounding environment. Traditional cloth curtains aren’t the only options available for a window treatment.

Curtains are inexpensive, but they do not necessarily look attractive.

Curtains, on the other hand, are the least expensive option, despite their low aesthetic and durability ratings.

2.Room Dividers

  • It works well in: unfinished basements or a garage that is only used for storage.

Another inexpensive and extremely simple technique for concealing your water heater is to use a room divider. The only thing you have to do is pick the one you want and set it up; everything else is taken care of. The majority of them are imported from Asia, and the variety appears to be limitless. There are many different materials to pick from, including wood, cloth, and glass. In addition, there are portable, fixed, collapsible, and even hanging and roll-up models available to choose from.

Room dividers are inexpensive, but you may not want to put them on display.

3.Pallets

It is due to their extraordinary versatility that pallets have grown increasingly popular in recent years. They can be used as tables, shelves, or organizers, depending on their size. They may, however, also be used to cover a water heater if necessary. Because pallets are constructed of wood, you’ll need to utilize the boards that came with them to construct your cover. Then, using a hammer, pound the boards together to form a barrier in the place you want to conceal. It will have the appearance of a rustic room divider, but it will be far less expensive because pallets may be discovered as free scrap material.

You should avoid placing your pallet screen in the most heavily used areas of the house unless you can find a method to incorporate it with the existing furnishings. Pallets are in the middle of the road in terms of appearance and durability, and they are certainly the most affordable option.

4.Faux Cabinet or Closet

  • As a result of their tremendous versatility, pallets have grown increasingly popular. This type of furniture can function as a table, a shelf, or an organizer. A water heater, on the other hand, may be protected by using them. Due to the fact that pallets are constructed of wood, you will need to construct your cover using the boards. Measure the area you want to conceal and then hammer the planks together to form a divider. This project will have the appearance of a rustic room divider, but it will be far less expensive because pallets may be found as free scrap material. Decorate them with paint or hang plants and photos on the outside of the building. You should avoid placing your pallet screen in the most heavily used areas of the house unless you can find a method to make it fit in with existing furnishings. With regards to appearance and durability, pallets are in the center of the pack. They’re also quite affordable.
  • The worst places to have a leak are unfinished basements or garages that are solely utilized for storage.

A false cabinet or closet is one of the most popular solutions since it is both functional and attractive. If you already have a structure in place, such as a closet, adding an extra door will seem natural. No one will suspect that it is being used to conceal a water heater. If you wish to develop your own version of this solution, you will need some technical knowledge. If you enjoy working with wood, you should give it a shot. It is also a more permanent solution when compared to other options such as curtains or room partitions.

Therefore, you may think of it as a one-time investment.

While imitation cabinets or closets are more attractive and durable than real cabinets or closets, they are more expensive.

5.Plantation Shutters

  • Finished basements, bedrooms, kitchens, or a garage that doubles as a work space are the best places to put this.
  • The worst places to have a leak are unfinished basements or garages that are solely utilized for storage.

Plantation shutters are a type of false cabinet or closet that is similar to real cabinets or closets. They provide a sense of refinement to your home while also increasing its worth. Plantation shutters are another another long-lasting and permanent option to consider. The materials used to construct them include wood, PVC, foamed synthetics, and medium density fiber. You may also pick sliding ones according on your requirements or personal choice. The most popular are those that are manufactured to order.

It would be a waste to utilize them in a garage or an unfinished basement because they are so large.

However, if you are remodeling and only want to make a one-time investment, they may be worth your while.

We’ve Got You Covered

We’ve covered some of the most common techniques for concealing an unattractive water heater in this article. You have the option to select what you want based on your requirements. If you need a fast, temporary solution, you may purchase some inexpensive drapes to conceal your heater. Permanent solutions, on the other hand, may be preferable if you’re conducting extensive renovation and want the most visually acceptable option. To get started, faux closets and plantation shutters would be excellent choices.

Do you have any queries or suggestions on how to cover a water heater that you’d like to share with us?

If so, which ones?

Leave a Reply

Your email address will not be published.