How Much Is A Tankless Water Heater Installed

Learn how much it costs to Install a Tankless Water Heater.

Published on the 10th of January, 2022. Cati O’Keefe, Expert Home BuildingSustainability Contributor, has reviewed this article. HomeAdvisor has contributed to this article.

Tankless Water Heater Cost

Installation of a tankless water heater costs around $2,317, or between $1,196 and $3,446, depending on labor rates. Tankless model costs vary according on the manufacturer, model type, and flow rate. Comparing estimates from local contractors is the most efficient approach to plan a budget for a new tankless water heater. Inquire with your local professional to see whether your tankless system qualifies for a tax refund. If these devices are installed and linked appropriately, they have the potential to save you money in the long term.

They will have the knowledge and skills to accelerate the installation while also ensuring that it is done correctly.

Tankless Water Heater Cost Calculator

Let’s run some numbers to see what the costs are. What part of the world are you in? What part of the world are you in?

National Average $2,317
Typical Range $1,196 – $3,446
Low End – High End $350 – $5,200

Let’s run some numbers to see what it will cost. I’m curious as to where you are. I’m curious as to where you are.

Tankless Water Heater Installation Cost

A professional might charge either an hourly rate or a flat price, depending on the services provided to the customer. Installing a tankless water heater will cost you between $45 and $150 per hour on average, depending on how long it takes. Final labor costs range from $100 and $450 on average.

Cost Factors

A professional might charge either an hourly rate or a flat price, depending on the services provided to the client. The typical hourly charge for a plumber to install a tankless water heater is from $45.00 and $150.00 per hour on the job. On average, final labor costs range from $100 to $450 per hour of work performed

  • Termination vent kits range in price from $40 to $100
  • Gas connector kits range in price from $20 to $35
  • And a two-piece lead-free brass valve set ranges in price from $60 to 110. Fittings and mounting hardware range from $10 to $30
  • Insulation and pipe are priced at $10 per foot.

Gas connection kits cost between $20 and $35, while a two-piece lead-free brass valve set costs between $60 and 110 dollars. Termination vent kits are available for between $40 and $100 dollars. $0 to $30 for fittings and mounting hardware; $0 to $10 per foot for insulation and piping

Get a Quote for Your Tankless System

The sort of equipment you choose will have a significant impact on the overall cost of your project. Single-point electric units cost around $150 apiece, and a high-end gas model for the entire house may cost more than $1,500.

Tankless Type Average Unit Cost
Natural Gas or Propane $1,000 – $1,500
Electric $500 – $1,500
Solar $1,400 – $6,000

First and foremost, you must determine what sort of unit you will require.

  • Noritz gas tankless unit with a BTU output of 199,000: A typical family with many bathrooms will be able to get by with this amount. It might take up to ten hours to complete the installation. Installation of suitable ventilation to avoid carbon monoxide poisoning, as well as the modification of the size of gas lines and fittings, will be more expensive in terms of labor. Model with an electric motor and a point-of-use interface: This is something that can be fitted under the sink. Installation takes an average of about two hours. It is necessary to have an electric timer, an outlet, and supply lines.

Whole House or Single Point

Tankless systems that are installed at a single point, or at a “point of use,” are those that are installed expressly by and for individual appliances and faucets that require them. They are quite simple to install and range in price from $100 to $300 per unit. They will be more efficient than utilizing a single one for the entire home because the water will only travel a small distance and will thus be wasted less frequently. The fact that they work independently of one another makes these single point systems particularly helpful in homes with several bathrooms and appliances.

However, one whole-house unit will be plenty for an average-sized home with consistent consumption throughout the day. Village Plumbing, LLC is based in Henderson, Nevada. In Las Vegas, gas tankless water heaters cost on average between $800 and $1,500.

Natural Gas or Propane Water Heaters

Installation of natural gas and propane models often costs between $1,000 and $1,500. While all of these types of gas will feed your system in a similar manner, there are some significant variations in the costs of purchase and operation between the two. propane must be purchased separately from natural gas since it is dependent on a utility supply line to be available. If you reside within a specific distance of a natural gas pipeline, you may be obliged to connect to it to heat your home. This isn’t a problem for the vast majority of homeowners.

Propane, on the other hand, is a more environmentally friendly and energy-efficient fuel that has a larger BTU capacity than natural gas.

They are also available in a variety of outputs ranging from 140,000 BTUs to 380,000 BTUs and in both residential and commercial categories.

Electric Tankless Water Heater Prices

It costs around $1,000 to $1,500 to build a natural gas or propane fireplace. These two types of gas will both feed your system in the same manner, but the costs of purchase and operation are significantly different. In contrast to natural gas, propane must be purchased separately and is dependent on a utility supply line. If you reside within a particular distance of a natural gas line, you may be forced to connect to it to keep your home running. This isn’t an issue for the majority of people who own their own homes.

In contrast to natural gas, propane is a more environmentally friendly and energy-efficient fuel that produces more BTUs.

Also available in residential and commercial grades, they have a variety of outputs ranging from 140,000 BTUs to 380,000 BTUs.

  • Electric hybrid water heaters are initially more expensive than ordinary electric ones, but they heat water more quickly than conventional electric models. Despite the fact that they are not considered tankless, they have many of the characteristics of a tankless system: They do not require any ventilation and are extremely cost-effective. However, they are only available in versions with a maximum BTU output of 8,700. Electric Models for Point-of-Use: $100 to $300 per unit- These have a number of appealing characteristics, including as their price and ease of installation. Aside from that, they are quite easy to use beneath sinks and in compact spaces, including near washing machines. This is a fantastic alternative for folks who want compact units for campers, boats, and other modest restroom requirements. They are non-corrosive, insulating, visually appealing, and light-weight in design. They contribute to water conservation by easily heating and delivering it swiftly
Find a Pro to Get Your Heater Installed

Solar heaters range in price from $1,700 to $5,000 to install. Prices have been reported to go as high as $13,000. These approaches, on the other hand, produce some of the biggest returns. First and foremost, they are eligible for the 30 percent tax credit. For a $6,000 installation, that equates to $1,800 in return. Second, studies have shown that they may save water heating costs by 50 percent to 80 percent, depending on the model. Tankless heaters can be used in conjunction with solar power systems to maximize energy savings.

Solar water tanks can be used to store hot water collected by solar collectors, which can then be utilized by the tankless water heater in the residence. The solar-energy components will have a high initial outlay of money.

Tax Credits

It costs between $1,700 to $5,000 to install a solar water heater (or warmer). Some reports indicate that prices can reach $13,000. These styles, on the other hand, provide some of the best returns. The 30 percent tax credit is the first benefit they receive. $1,800 is returned for a $6,000 installation. They also save money on water heating costs, according to studies that indicate a 50 to 80 percent reduction. If you want to save the most money on energy, tankless heaters can be used in conjunction with solar systems.

Water heated by solar collectors can be stored in solar tanks and utilized by the tankless water heater in the house.

Popular Tankless Heater Brands

Tankless Prices by Brand
A.O. Smith $600 – $4,000
Bradford White $500 – $2,000
EcoSmart $150 – $6,000
Rheem $200 – $2,000
Rinnai $500 – $4,300
Takagi $500 – $7,000

Choosing the Right Tankless Water Heater

“The advantage of using a tankless water heater is that you are avoiding any liability from leaks. We receive calls on a regular basis from customers whose conventional tank heaters have failed. Even the new ones fail since they are only capable of carrying 50, 40, or 100 gallons of water each. That leak might cause substantial harm if you’re on vacation and it happens to you. The advantage of using a tankless system is that you won’t have to worry about it.” Twin Home Experts is owned and operated by Jim Schuelke in Phoenix, Arizona.

So, how can customers choose which one is the best fit for their needs and preferences?

The flow rate is measured by counting the number of gallons that are produced every minute (gpm).

Check out the table below to determine which tankless water heater capacity is most appropriate for you: 1.

Average Water Usage for Common Household Features

  • Washing machine flow rates are 1.5-3.0 gpm
  • Shower flow rates are 1.0-2.0 gpm
  • Bathroom faucet flow rates are 0.5-1.5 gpm
  • Dishwasher flow rates are 1.0-2.5 gpm
  • Kitchen flow rates are 3.0-9.0 gpm.
Compare Quotes For You Tankless Heater Installation
  • Installation that is more time-consuming and expensive
  • Prices are higher
  • Units take up more space
  • They are better for larger places.

Pros of Tankless Units

This is not a project that the ordinary do-it-yourself homeowner should attempt. Many homes will need to be modified in order to suit this system, which may need the installation of new wiring or gas lines, the installation of new plumbing and fittings, and the rebuilding of drywall. This task must be conducted by a qualified professional in some areas, which is required by law. This is due to building rules governing carbon monoxide emissions, heat resistance, ventilation, and state-specific codes, such as seismic straps in California, among other things.

Additionally, they may make certain that you have the proper equipment for your property.

Using a professional ensures that the job is completed quickly and accurately, preventing your house from becoming flooded while you wait for a plumbing permit. Get the Job Done Right the First Time. Locate a Professional in Your Area

FAQs

The payback time for these products is rather lengthy. Despite the fact that they are expected to endure for 20 years, it will take around 20 years for your energy savings to match your initial outlay. So the value of these models is determined by their use to you and their potential utility in attracting future home purchasers to your neighborhood. By selecting the most appropriate model for your consumption requirements, you may increase the return on your investment.

Are tankless hot water heaters better?

The advantages of these models over conventional models are numerous. They save water by heating as they go, and they can help you save money on your energy bills. As a result, they are more durable and require less maintenance than conventional tanks since they do not store water, which may erode tank material and create leaks.

Do tankless hot water heaters work without electricity?

In the event of a power failure, these units will not function. Even gas versions require power to operate their spark igniter, which is a common problem with gas models.

What temperature should you set a tankless water heater?

The Consumer Product Safety Commission recommended that products be stored at 120 degrees Fahrenheit for the greatest amount of safety and efficiency. Do not set your unit to a temperature higher than 140 degrees Fahrenheit under any circumstance.

What is the best rated tankless water heater?

Rheem and EcoSmart are two brands that have received great ratings. In spite of this, the business is always changing and each home and family will have its own set of requirements. It’s advisable to speak with a professional to determine which option is best for you.

How much water does a 20-minute shower use?

A typical shower consumes 2.5 to 3.0 gallons per minute, resulting in a 20-minute shower consuming 50 to 60 gallons of water. In most cases, these water heaters are capable of producing 4 to 8 gallons of hot water per minute.

Thinking of upgrading to a tankless water heater? Before doing so, learn the pros and cons of installing one

Are you considering making the switch to a tankless water heater? Before doing so, educate yourself about the advantages and disadvantages of installing one, including the cost, needs, and upkeep. It is possible that you are considering installing a tankless water heater in your house if it is time to replace your current water heater. We’ll explain how tankless water heaters function and point out some of its pros and downsides to assist you in making the best decision about which kind to install.

Do you require an expert right away?

To make a reservation, please click here.

The services available differ depending on the market.

How Tankless Water Heaters Work

Known variously as demand type, on-demand, or instantaneous water heaters, these appliances heat water directly, eliminating the need to store water. A flow detecting device is installed in a tankless heater, and it is triggered anytime the hot water tap is opened. A gas burner or an electric element is used to heat the water, which is then sent to the various locations in your home where it is needed.

You won’t have to worry about running out of hot water because there isn’t a tank that has to be filled. When you turn off the hot water faucet, the machine detects that the flow of water has ceased and automatically turns off the heating element.

Advantages Of Tankless Water Heaters

  • They are more compact than typical storage heaters, are wall-mounted, and do not take up any floor space when not in use. As a result of their size, they can be particularly appealing in houses where space is limited
  • They can also help you save money on your energy bills. According to the United States Department of Energy, heating water accounts for around 30% of a family’s total energy use. It is possible to save up to 50% on these expenditures by installing a tankless water heater, resulting in an average yearly savings of $80. Tankless water heaters are also more durable and less likely to malfunction, resulting in potentially disastrous flooding in your house. Compared to traditional water heaters, tankless systems have a lifespan that is about twice as long – 20 years or more.
See also:  Why Would A Tankless Water Heater Stop Working?

Disadvantages Of Tankless Water Heaters

  • They are more compact than typical storage heaters, are wall-mounted, and do not take up any floor space when in operation. When it comes to homes where square footage is limited, their size may make them particularly appealing
  • They can also assist you in lowering your energy expenditures. Energy expenses for heating water account for around 30% of a family’s total energy bills, according to the United States Department of Energy. It is possible to save up to 50% on these expenditures by installing a tankless water heater, resulting in an annual savings of around $80. Tankless water heaters are also more durable and less likely to malfunction, resulting in potentially disastrous flooding in your house. Compared to traditional water heaters, tankless water heaters have a lifespan that is about twice as long – 20 years or longer.

Gas or Electric

Electric tankless water heaters are significantly less expensive than their gas counterparts. Installation is less complicated and less expensive, and they are often less difficult to maintain than gas-powered ones. Only a few handful, however, have the capability of serving many locations at the same time. Gas units are available in a wide range of types and sizes for both residential and commercial applications, with outputs ranging from 130,000 to 380,000 BTUs in certain cases. More BTUs equate to more heating capacity.

  • As a result, your home’s gas pipe, meter, and main line to the meter may not be correctly proportioned, necessitating a costly reconfiguration and installation of new equipment.
  • The total energy efficiency of a tankless water heater is assessed using an energy factor (EF) rating, which is available for both gas and electric types.
  • Tankless water heater energy factors now range between.64 and.91 for gas-fired devices, and up to.99 for electric versions, depending on the manufacturer.
  • For a home of one or two persons, a tankless electric unit will most likely be more than sufficient.

Water Heater Protection

Whatever method you use to fulfill your household’s hot water requirements, you’ll want to make sure that the investment you’ve made in your water heater is protected. That entails completing the preventative water heater maintenance advised by the manufacturer, as well as routinely emptying the tank (or lines) to remove potentially harmful silt and scale. Consider obtaining an American Home Shield® Water Heater Home Warranty to help reduce the expenses involved with the repair and replacement of your water heater even more.

It is particularly stated that AHS takes no responsibility, and expressly disclaims all liability, in connection with your use of any and all material included on this website.

WE HAVE OPTIONS BECAUSE WE CARE.

Read This Before You Buy a Tankless Water Heater

Consider the following: The method used by the majority of houses in this nation to heat water is ridiculously inefficient. Every year, we fill up large storage tanks of 40- to 50-gallon capacity with water and then continuously pump energy into them to ensure that we have hot water available anytime we want it. But, unfortunately, this is not always the case. The wait for the tank to reheat might be lengthy if a teenager is taking a long shower or the spouse is enjoying a long soak in the tub.

Then there are the niggling concerns such as: Is it clogged with silt that consumes energy? Is there a chance of a leak? Both of these worries are fair given the fact that tanks often fail between 8 and 12 years.

Tankless Water Heater Installation: Is It Worth It?

Investing in a tankless water heater has a number of benefits, as detailed above. It creates hot water just when you use it and for as long as you require it, resulting in a reduction of 27 to 50% in fuel expenses when compared to tank-type heaters. (A typical gas-fired tank wastes 40 to 50% of the fuel it burns, according to the manufacturer.) As a result, there is virtually little danger of a catastrophic leak occurring because there is no tank to collapse. Furthermore, since their introduction in the United States in the 1990s, tankless heaters have become increasingly sophisticated, with features such as built-in recirculating pumps (which provide “instant” hot water) and wireless connectivity, which alerts you via smartphone when a unit requires servicing.

Our tankless water heater guide will explain how they function, what you should know before purchasing one (and before the installation comes), and the idiosyncrasies of how they operate so that you won’t be caught off guard if you decide to go tankless.

How Does a Tankless Water Heater Work?

A tankless water heater has several advantages, and these are the arguments in favor of purchasing one. The heater only provides hot water when you need it and just for the amount of time you need it, saving you 27 to 50% on fuel expenditures as compared to tank-type heaters. (A typical gas-fired tank loses 40 to 50% of the fuel it burns, according to industry standards.) Furthermore, because there is no tank to fail, there is essentially little likelihood of a catastrophic leak occurring in this configuration.

Our tankless water heater buying guide is provided below.

Download the guide today.

  1. It all starts with the first turn of the hot-water faucet (1). A flow sensor (2) detects the presence of water entering the heater and sends a signal to the control panel, causing the heater to begin generating hot water. During operation of a natural-gas-fueled unit, thecontrol panel (3) activates thefan (4), which pulls in outside air, opens the gas valve (5), which allows the gas to flow into the unit, and ignites the burner (6). In order to transmit heat from the flames to water passing through the exchanger’s tubing, a heat exchanger (number 7) is used. The mixing valve (8) regulates the temperature of the superheated water that exits the exchanger. Whenever the temperature sensor (9) detects water temperatures that are too high or too low for the intended setting, the panel will modify the gas valve, the mixing valve, and the flow-regulating water valve (10) in accordance with the results. Ventilation is provided by a sealedvent (11) (or a couple of vents) via a roof or exterior wall, which removes exhaust gases and supplies combustion air to the burner.

Several people were thanked for their contributions: Phillip Maxwell, Residential Product Manager, Rheem; Eric Manzano, Product Training Supervisor, Noritz; Joe Holliday, Senior Vice President, Product and Business Development, Rinnai; and Fred Molina, Water Heater Products Manager, Bosch Thermotechnology

What to Know About Tankless Water Heaters

Thanks to Noritz for the use of his photo.

How Much Does a Tankless Water Heater Cost?

Prices range from approximately $170 for modest gas-fired units to more than $2,000 for high-output heaters that can serve two showers at the same time; $1,000 is a reasonable starting point for most buyers.

Electric heaters without a tank range in price from $90 to $900. The expenses of a first-time installation are higher than the price of a simple tank replacement. Electric tankless water heater installation (see item below headed “Installing an Electric Tankless Water Heater”).

How to Install a Tankless Water Heater

This is a work that should be left to the professionals, since it entails creating leak-free water, vent, and gas connections in the case of gas or propane units, or upgrading the wiring and circuit-breaker panel in the case of electric units, and it is best left to the professionals.

Tankless Water Heater Maintenance

Sign up to have a professional do an annual service that includes cleaning or replacing water and air filters, as well as inspecting the burner’s operation. The use of a vinegar flush every 500 hours in places with hard water prevents mineral accumulation, known as scale, from blocking the heat exchanger. That 20-minute task may be completed by a professional or by a homeowner.

How Long Do Tankless Water Heaters Last?

It is expected that gas-burning tankless water heaters would last 20 years or longer, which is two to three times longer than tank-type heaters. Tankless electric units have shorter life lifetimes, ranging from 7 to 10 years, compared to conventional units.

Where Can I Buy One?

They may be found at plumbing supply stores, big-box stores, and internet sellers, among other places. Alternatively, you may order one via your plumber.

Pros and Cons of Tankless Water Heaters

Thanks to Noritz for the use of his photo.

PRO: They’re Compact

As a result of new federal requirements requiring stronger insulation to decrease standby heat loss, the size of newer tank-type water heaters has increased. Consequently, they may not be able to fit into locations where an older heater with the same capacity might. Tankless gas heaters are approximately the size of a suitcase and are mounted on the wall.

PRO: They’re Safer

A tank-type heater, on the other hand, may leak and spill gallons of water if it springs a leak, but it will not house Legionella germs or topple over in an earthquake. The air supply and exhaust vents are also closed to prevent backdrafting, which would otherwise allow carbon monoxide to enter the house.

PRO: They’re Easy to Winterize

Owners of vacation homes are well aware of how long it takes to drain a water-heating tank prior to closing up a house for the season. An electric compressor may drain a tankless heater in a matter of seconds, after which it can simply be unplugged.

CON: They’re Sensitive to Slow Flow

These devices automatically shut off if there is too much scale accumulation in the pipes, or if the aerators in the faucets and showerheads get blocked, or if a turned-down faucet limits water flow to around 0.3 gpm.

CON: The Payback Takes Awhile

An annual savings of only around $100 for a household using a $1,000 tankless gas heater vs a $400 tank-type heater is possible, depending on how efficient the heater is and how much hot water is utilized. The savings, however, begin to accrue after six years, when many tanks are reaching the end of their useful lives due to the extended lifespan of tankless gas systems.

New Tankless Water Heater Technology

Thanks to Noritz for the use of his photo. The advancement of tankless technology is ongoing. Here are a few of the most recent enhancements:

Higher Efficiency

Thanks to Noritz for providing this image. The advancement of tankless technology is ongoing. A few of the most recent improvements are as follows:

Instant Hot Water

Despite the fact that tankless water heaters heat water in around 15 seconds, you must still wait for the hot water to reach your shower head or faucet, just as you would with a tank-type heater. The recirculation pump should be used when the distance between the heater and the fixture is greater than 50 feet. This will conserve water and minimize the amount of time spent waiting. It is this pump that pushes the cold water in the pipes back through the heater.

The pump can be activated by a timer, a push button, a motion sensor, a smart speaker, or a smartphone (see illustration above). The pump shuts off after approximately a minute, and you may start using hot water immediately after opening the faucet.

Wi-Fi Compatible

Tankless systems with digital connectivity let you to control the temperature as well as monitor gas and hot-water use from your mobile device. Furthermore, the device is capable of identifying the cause of a problem. Please communicate this information to your plumber so that he or she may arrive on the job site knowing exactly what has to be done. This function also eliminates the need for any guessing when it comes to determining when it is time to descale.

Tankless Water Heater Rebates: A Great Way to Save

Temperature control and monitoring of gas and hot-water use are possible with tankless systems that have digital connection. The device is also capable of identifying the cause of a problem. Provide that information to your plumber, and he or she will be able to arrive on the job site knowing exactly what is required. Having that function also takes the guesswork out of knowing when it’s time to descale your aquarium.

What Size Tankless Water Heater Do I Need?

Here’s how the specialists ensure that your water heater produces adequate hot water: 1. A large burst of BTUs is required for a tankless heater to convert cold water into hot water in a matter of seconds. However, if a heater’s Btu output is insufficient to meet demand, it will reduce the flow rate or, in the worst scenario, offer tepid water. A plumber considers three aspects when determining whether or not a heater will be able to satisfy the demands of a household:

  • The temperature of the water that enters the heater
  • The maximum demand for hot water expressed in gallons per minute (gpm)
  • The efficiency of the heater, as shown by its Uniform Energy Factor, which may be found in the product specifications
  1. The first step is as follows: A professional determines how many Btus per gallon of water heater is required to increase the incoming water temperature to 120 degrees (see the map on the next slide)
  2. Flow rates for all of the appliances and fixtures that may be consuming hot water at the same time are added together to form peak demand, which is calculated as follows: (These rates are detailed in the next slide.) As a result of not bathing or washing in 120-degree water, we save around 20% on our overall use. Water-saving fixtures and appliances, as well as delaying laundry while the shower is in use, can help you minimize peak consumption. In the calculation, the total Btu production is computed by inserting the Btus-per-gallon and peak-demand amounts in at different points along the way. If the difference in output is between two models, go with the one with the greater Btu rating to save money. You’ll also need two smaller units that function in tandem if your output is greater than 198,000 Btus, which is the limit for domestic gas heaters.
See also:  Why Is My Water Heater Not Working

Btus Output Estimate

Not interested in completing the calculations? Make a rough estimate of how much heater output you’ll want using these statistics.

  • The following figures are for one bathroom for one to two people: 140,000 Btus
  • Two bathrooms for two to three people: 190,000 Btus
  • Three bathrooms for three to five people: 380,000 Btus

Btus Per Gallon by Region

  • The following figures are for one bathroom for one to two people: 140,000 Btus
  • Two bathrooms for two to three people: 190,000 Btus
  • Three bathrooms for three to five people: 380,000 Btus

How to Determine gpm?

The following figures are for one bathroom for one to two people: 140,000 Btus; two bathrooms for two to three people: 190,000 Btus; three bathrooms for three to five people: 380,000 Btus.

Electric Tankless Water Heater Facts

Thanks to Stiebel and Eltron for their assistance. In addition to gas lines and propane tanks, tankless water heaters operated by electricity can provide the benefits of on-demand hot water to homes that do not have them. Compared to gas or propane tankless heaters, these systems, which heat water using thick copper rods, are significantly quieter and roughly a third smaller in size. And because they do not require vents, they can be fitted practically anyplace, even beneath sinks and in small closets, without compromising performance.

In locations with warm groundwater, that amount of hot water may be sufficient to feed a whole house; but, in colder climates, they are better suited to point-of-use service, where the demand for hot water does not become excessive.

Furthermore, electric heaters have a lifespan that is approximately half that of gas heaters: Warranty periods typically range from three to five years.

As soon as the heating elements fail, it is frequently more expensive to replace the complete heater than it is to simply replace the heating elements.

Tankless Water Heater Installation

Doug Adams created the illustration. What you and your plumber should look for before the installation day is as follows:

Gas Line

Doug Adams has created this illustration. You and your plumber must evaluate the following items before to the installation date:

Venting

Tankless gas heaters that do not condense employ stainless-steel vents that can resist high exhaust temperatures. Condensing systems feature a cooler exhaust and use PVC pipes, which are less costly than other types of exhaust. Installing a concentric vent, which has an exhaust pipe inside a larger air-intake pipe, is easier than installing a traditional vent since only one hole in the wall needs to be made. As a point of reference, vent runs have traditionally been limited to a maximum of 10 feet.

Water Hardness

Heat transmission is slowed and water flow is restricted when scale deposits accumulate in a heat exchanger (or on electric heating components) over time. If you currently have whole-house water softening, scale will not be an issue for you. However, if your water is not being softened and its hardness surpasses 120 milligrams per liter, it is worthwhile to invest in a treatment system to remove the hardness. For your information, a specific, point-of-use cartridge, such as the TAC-ler water conditioner (Stiebel Eltron), can be used to change the hardness of water without the use of salt or other chemicals.

Outdoor Tankless Water Heater

Heat transmission is slowed and water flow is restricted when scale deposits accumulate in a heat exchanger (or on an electric heating element). If you currently have whole-house water softening, scale won’t be an issue in your household. However, if your water is not being softened and its hardness surpasses 120 milligrams per liter, it is worthwhile to invest in a treatment system to reduce the hardness of your water. Note: A specific point-of-use cartridge such as the TAC-ler water conditioner (Stiebel Eltron) can be used to change the hardness of water without the need to add salt or other chemicals to the water supply.

  • Saves space: You won’t have to create place for another appliance in your home as a result of this. Installation is straightforward: Because of the built-in exhaust vent, there is no need to drill a large hole (or two) through the side of the building. Service is simple: A plumber may come to your home at any time, whether or not you are there. However, take in mind the following: Regulations governing construction: If you want to install it outside, you may require approval from your local building department. Weather conditions that are cold: Even at temperatures as low as 22 degrees Fahrenheit, internal heaters keep components warm, but exposed water lines must be insulated and covered with heat tape that activates automatically in freezing conditions. Southern states are less concerned about frozen pipes than those located north of the Mason-Dixon Line.

Tankless Water Heater Venting

Carl Tremblay captured this image. Are you in need of assistance with repairs around your home? A house warranty may be of assistance. The This Old House Reviews team has put up some in-depth guidelines that you can read here:

  • Home warranty providers that are the best
  • Reviews of American Home Shield, AFC Home Club, Select Home Warranty, and Choice Home Warranty are all available.

Cost to Install or Replace Tankless Water Heaters

Tankless water heaters are popular among homeowners because they are energy efficient, provide rapid hot water, and will never cause 40 gallons of water to flood your home. The only disadvantage is that they require a significant upfront cost to be installed. The experienced plumbers at Reliant Plumbing have put together this website to assist you in better understanding the expenses associated with your construction or remodeling project.

Please keep in mind that all pricing on this page is based on typical costs we’ve seen in the Austin, Texas area. Your expenses may vary based on the cost of plumbing labor and materials in your local region at the time of the estimate.

Cost to Install a Gas Tankless Water Heater

In the Austin, Texas region, the typical cost to have a qualified plumber install a gas tankless water heater is around $7,250– based on current costs for plumbing services. See the table below for a breakdown of the costs: When you are installing a tankless water heater for the first time, you will need to make a number of modifications to your home to suit the new unit. The reason for this is because the cost of installation varies greatly based on your current arrangement. Following are some of the steps that will need to be completed during the installation of your new tankless unit:

  • Reposition the water lines and circulation line
  • Install a condensate drain
  • Install a wall-mounted pan drain
  • And more. Temperature Pressure Relief Valve should be repositioned. A bracket and wall support should be installed to hang the tankless water heater. In the case of the gas line leading to the water heater, the pipe size should be increased. Converting metal venting to PVC is an option. Install flashing to guarantee that there are no leaks in the gas pipe (this may necessitate the use of a roofer)
  • To control the igniter temperature control panel, connect a 110-volt electrical outlet to the wall.

Move water lines and the circulation line; install a condensate drain; install a wall-mounted pan drain. Reposition the Temperature Pressure Relief valve; install a bracket and make sure there is enough wall support to hang the tankless water heater; In the case of the gas line leading to the water heater, the pipe diameter should be increased. Converting metal venting to PVC is an excellent idea. To guarantee that there are no leaks in the gas pipe, flashing should be installed (this may necessitate the hiring of a roofer).

Cost to Install an Electric Tankless Water Heater

Reposition the water pipes and circulation line; install a condensate drain; install a wall-mounted pan drain; Reposition the Temperature Pressure Relief valve; install a bracket and provide enough wall support for the tankless water heater; In the case of the gas line going to the water heater, the pipe size should be increased. Convert metal venting to PVC venting; Install flashing to guarantee that there are no leaks in the gas pipe (this may necessitate the hiring of a roofer); To manage the igniter temperature control panel, install a 110-volt electrical outlet.

Cost to Replace a Gas Tankless Water Heater

In the Austin, Texas region, the typical cost to have a professional plumber replace a gas tankless water heater is roughly $4,700– based on current prices for plumbing services. It is far less expensive to replace a tankless water heater because your location has already been set up to accommodate tankless water heaters. These water heaters, on the other hand, should endure for at least 15 years before needing to be replaced. If you’re experiencing troubles with your tankless water heater, take a look at these often encountered issues.

See the following table for replacement expenses of a gas tankless water heater:

Cost to Replace an Electric Tankless Water Heater

In the Austin, Texas region, the typical cost to have a qualified plumber replace an electric tankless water heater is around $4,200– based on current prices for this service. It is far less expensive to replace a tankless water heater because your location has already been set up to accommodate tankless water heaters. These water heaters, on the other hand, should endure for at least 15 years before needing to be replaced. If you’re experiencing troubles with your tankless water heater, take a look at these often encountered issues.

It is recommended that if you are certain that you need to replace your electric tankless water heater, you consider converting it to a gas one instead.

Because of their quality and dependability, we favor gas tankless heaters.

If you decide to go with a gas tankless water heater instead of an electric one, your costs will be more in line with the cost of installing a gas tankless water heater described above. The following is a summary of the expenses associated with replacing an electric tankless water heater:

How to Get an Estimate for Your Tankless Water Heater

Due to the wide range of differences between each property, it is impossible to estimate the cost of plumbing improvements. Frequently, when we arrive on a project site, we discover that the existing plumbing must be brought up to code before we can begin working. When hiring a plumber, you should always negotiate price with them up front. They should come to your home to assess the scope of your renovation and give an estimate. This is not going to be free, so be prepared! The time it takes for a plumber to come out to your house is considerable, and they frequently need to do some diagnostics before providing you with an estimate.

Do they charge for labor on an hourly basis or do they charge a set rate?

The condition of your water heater is critical to the operation of many of your home’s plumbing fixtures.

If you live in or around the Austin region, we would be delighted to assist you with your tankless water heater installation!

Learn More About Tankless Water Heaters

Right now, our plumbing professionals are here to take care of your repair needs. They’ll assess your situation, propose a solution at a reasonable fee up front, and then get to work!

Upfront Pricing

There are no hidden fees.

Quality Work

There are no additional fees.

24/7 Service

There are no hidden fees or charges.

Tankless Water Heater Cost: Installation & Unit Prices

The price of a tankless water heater ranges from $250 to $6,500 dollars. Get quotations from as many as three professionals! Enter your zip code below to get matched with top-rated professionals in your area. In the event that you’ve ever had to take a chilly shower throughout a frigid winter, you’ll understand how terrible it might be to go into the shower. Many households have switched to tankless water heaters in order to avoid this unpleasant experience. Although tankless water heaters are expensive up front, with a national average cost of $2,200, the energy savings and convenience they provide may make them a worthwhile investment in the long run.

How Much Does It Cost to Install a Tankless Water Heater by Size?

Prices for tankless water heaters range from $250 and $6,500. Get bids from as many as three professionals at the same time. To find top-rated professionals in your area, enter your zip code below. In the event that you’ve ever had to take a chilly shower throughout a frigid winter, you’ll understand how awful it might be. Many homes have switched to tankless water heaters in order to avoid this problem. These water heaters are not cheap, with a national average price of $2,200. However, considering the energy savings and convenience they provide, they may be well worth the investment in the long run.

See also:  What Does A Bad Water Pump Do?

How Much Does It Cost to Install a Tankless Water Heater Near You?

Installation of a tankless water heater might be quite expensive depending on where you reside in the United States.

The following table shows the average cost for ten popular cities in the United States:

  • Among the most expensive cities to live in are Austin ($2,360), Boston ($2700), Chicago ($2,100), Denver ($2,600), Miami ($1,040), Nashville ($2,400), New York ($2,200), San Francisco ($2,600), Salt Lake City ($3,600), and Seattle ($2,180).

Other elements that may influence your overall expenditures include whether you reside in a rural or urban region, as well as the natural rise and decrease of average going rates over a certain time period.

What Tankless Water Heater Can I Get on My Budget?

Not all tankless heaters are suitable for every household’s financial situation. Here is a list of what you can receive for your money:

$300

Not all tankless heaters are suitable for every household’s financial situation, though. Following is an example of what you can receive for your money:

$1,000

If you want to invest in a system for the entire house but still want to save money, electric ones are your best bet. They are also the least expensive. You may have an effective, whole-house system that is vent-free, high-performance, and energy-efficient for a price ranging between $800 and $1,500.

$3,000

Both natural gas and propane water heaters are priced between $1,000 and $1,500, but you must also consider the expense of operating these heaters on a year-round basis. Natural gas costs around $200 per year, whereas propane costs approximately $350 per year.

$5,000

Solar panel water heater installation is the most expensive form of tankless water heater, with costs ranging from $1,700 to $5,000 for a typical installation. The good news is that, according to Energy Star, the Consolidated Appropriations Act of 2021 will provide you with a 30 percent tax credit for owning a renewable energy system. Even with this credit in mind, it’s a good idea to set aside some money for the up-front expenditures before making a purchase.

$10,000+

Solar panel water heater installation is the most expensive sort of tankless water heater, and it may cost anywhere from $1,700 to $5,000. Good news: According to the Energy Star, under the Consolidated Appropriations Act of 2021, you will be eligible for a 30 percent tax credit for owning a renewable energy system. In spite of this credit, it’s a good idea to set aside money for the upfront expenditures before making a purchase decision.

How Much Does It Cost to Install a Tankless System Yourself?

While it is possible to install a tankless water heater yourself, you must have prior knowledge in order to save money and do so in a safe and efficient manner. It is strongly recommended that you should not attempt to accomplish this job on your own. This might result in significant harm or property damage to you or your loved ones. An inexperienced handyperson may cause an explosion or discharge carbon monoxide into the air if a tankless water heater is installed or repaired. Not to mention that if a system is not installed by a professional, many warranties will be worthless, and your house will be at a higher risk of not being up to code if you ever decide to sell your property.

How Much Does It Cost to Install a Tankless Water Heater by Type?

Are you curious about how much money you can save (or spend!) by switching to a tankless water heater?

One of the most accurate ways to estimate your costs is to consider the type of heater you pick. There are four different types of tankless heaters to take into consideration:

1. Electric Tankless Water Heaters

Installing an electric model is the most economical alternative, with costs typically ranging between $800 and $1,500. Keep in mind that, unlike other more expensive solutions, you will not be required to spend additional funds on ventilation systems or upkeep.

2. Natural Gas Tankless Water Heaters

Installing an electric model is the most economical alternative, with costs ranging between $800 and $1,500 on average. Keep in mind that, unlike other more expensive solutions, you will not be required to spend additional money on ventilation systems or upkeep.

3. Propane Tankless Water Heaters

Although propane water heaters are the same price as natural gas water heaters for installation ($1,000 to $1,500), the cost of the fuel itself may add up, with propane costing approximately$350 per year to operate.

4. Solar Tankless Water Heaters

Solar heaters are the most expensive choice, with prices ranging from $1,800 to $6,000, though some may cost more than $13,000. Keep in mind that solar water heaters provide a larger return because they qualify for a 30% tax credit as well as a 50 percent to 80 percent reduction in your water heating bills due to the 30 percent tax credit.

What Factors Influence the Cost of a Tankless Water Heater?

Adobe Stock / Wavebreak3 / Wavebreak3 The cost of a typical tankless water heater is influenced by a variety of factors, including:

  • Kind: The type of tankless water heater you choose has an impact on the cost, with electric being the most economical option, followed by gas and finally solar, in that order. These expenses range from $800 to $6,000, depending on the situation. The cost of a single point or whole-house point system can range from as low as $100 to as much as $6,000, depending on the size of the system you pick. Number of heaters: If you are purchasing a single-point tankless water heater, you may find yourself having to purchase numerous heaters to fit different rooms. These heaters are typically priced between $100 to $300 per unit. Quality: You get what you pay for
  • If you want to use the heater on a regular basis, it is worthwhile to invest a little extra money on a higher-quality model. Expect to pay $1,000–$3,000 more for a high-quality tankless water heater than you would for a lower-quality tankless water heater. On-site issues: If you have a bathroom that is too tiny for a plumber and a helper to work side by side, your installation expenses may increase. Expertise of the installer: An experienced HVAC expert or plumber and his or her assistant will do the task fast, but they will charge more than a handyman service.

Labor Costs

Tankless water heaters are installed by plumbers and HVAC specialists in your neighborhood. The cost of labor will range from $40 to $175 per hour for your project. Local supply and demand, as well as any discounts or offers offered by a contractor or plumber, all have an impact on how much you will pay for services. Removal and installation of a typical tankless water heater, with no hidden issues, takes around three hours. As a result, total labor rates to remove an old water heater and install a new tankless system might range from $120 to $525.

Hidden Costs to Consider

When calculating the price of a tankless water heater, remember to include any hidden costs associated with the equipment, installation, and use. Example: If you require accessories to connect the tankless water heater to your plumbing system, the cost of the equipment may increase. If your home’s water pressure is inadequate, one regular and unexpected expense is the cost of adapting it. If your house pressure is low, a plumber may be required to repair a pressure regulator, clean clogged pipes, or install a bigger pressure tank (if you are on a well) in order to restore proper pressure.

This also helps to avoid disappointment if you anticipate that the tankless heater would save you a significant amount of money on fuel expenditures, which it will not.

FAQs About the Cost of a Tankless Water Heater

To figure out how much your tankless water heater will cost, take into consideration the cost of the heater itself as well as the price of installation using an installation calculator.

What should I consider when installing a tankless water heater?

After much deliberation, you’ve decided on a tankless water heater that meets your needs. Consider the amount of labor that will be required to remove an old, conventional water heater and replace it with a new tankless water heater before investing in the installation procedure.

What other projects should I do at the same time?

After much deliberation, you’ve decided on the sort of tankless water heater you want to purchase. Be sure to factor in the amount of labor that will be required to remove an old, conventional water heater and replace it with a new tankless water heater before you commit to the installation procedure.

How Much Does A New Tankless Water Heater Cost?

We at Bankrate are dedicated to assisting you in making more informed financial decisions. Despite the fact that we adhere to stringent guidelines, this post may include references to items offered by our partners. Here’s what you need to know about There are few things in life that are more unpleasant than taking a hot shower only to be met with water that is so cold it seems like it has come straight from a melting glacier. A tankless water heater is one method to ensure that you never again have to take a cold shower when you least expect it.

The entire cost is determined on the model selected as well as whether or not your home requires retrofitting.

Tankless vs. traditional

Understand the differences between tankless and regular water heaters may be easier if you look at this chart. A typical water heater warms and stores water in a tank with a capacity of 30 to 50 gallons, depending on the manufacturer. The heated water remains in the tank until it is required, and when it is consumed, the tank is refilled and the preheating process is repeated. A tankless water heater heats water on demand by using either electricity or natural gas as a fuel source. As a result, as soon as you switch on the dishwasher or step into the shower, the water that is required is heated at the source and is instantly available for use.

Check out our guide to obtaining the best rate on a home equity line of credit.

Electric or gas?

It may be helpful to understand the differences between tankless and regular water heaters. Water is heated and stored in a tank, which typically has a capacity of 30 to 50 gallons, using a conventional water heater. The hot water remains in the tank until you require it, and when you do, the tank is refilled and the preheating process begins all over again. A tankless water heater heats water on demand by using either electricity or natural gas.

When making home upgrades such as installing a tankless water heater, a home equity line of credit (HELOC) is an excellent option. For further information, please see our guide to obtaining the best possible rate on a HELOC.

  • There is a one-time fee. For $500-$700, you can have an electric model, while for $1,000-$1,200, you can get a gas model. Cost of installation: The cost of installing the device and upgrading utility hookups is between $1,000 and $2,000, depending on local expenses and the amount of work that has to be done. Gas versions require the installation of a safe ventilation system, whereas electric ones do not, making the installation of gas models more expensive. Cost of utilities: Gas may be less expensive to run than electricity depending on the cost of utilities in your location. Gas-powered machines require yearly maintenance, but electric-powered units are not required. An electric tankless water heater has no negative influence on the environment since it emits no greenhouse gases and is easy to recycle at the end of its useful life.

Benefits of a tankless water heater

A tankless water heater consumes 30 to 50 percent less energy than a traditional water heater, resulting in annual savings of more than $100 for the average household on heating bills. Instead of wasting 30 percent of its energy, a tankless water heater wastes just 5 percent, according to Energy Star. Although you may have to wait a few seconds for the water to heat up at the source, a tankless water heater ensures that you will never run out of hot water in your home. A tankless water heater is more compact and takes up less space than a standard water heater.

Lastly, a standard water heater has an average lifespan of eight to ten years, but the average lifespan of a tankless water heater is closer to twenty years.

Disadvantages of a tankless water heater

It is more expensive to purchase and install a tankless water heater upfront than it is to purchase and install a regular water heater. In fact, depending on the unit and the amount of retrofitting your home required, it might cost up to twice as much as a standard unit. It might take up to ten hours to complete the installation due to the level of skill required. The time it takes for hot water to be heated and supplied is longer. You may encounter what is known as a “cold water sandwich,” which occurs when the hot water is switched on but does not have enough time to heat up properly.

The final word

It is possible to use a tankless water heater when rebuilding your house or building a new one, or while staying at home on a part-time basis and do not want to be concerned about a leaky hot water heater while you are gone. Unless you have professional-level installation abilities, installing a tankless water heater is not a do-it-yourself effort. Despite the fact that they can be purchased online or at your local home improvement shop, it is better to leave installation to the professionals because it may be necessary to adapt your home in order for the water heater to function effectively.

It is possible that a tankless water heater will be less expensive in the long term when yearly energy savings and the fact that you will only have to replace it half as frequently as a standard unit are taken into consideration.

Leave a Reply

Your email address will not be published.