Forest River Surveyor Review – (2021) Info Guide
The Forest River Surveyor trailer, which has great construction and a slew of incredible amenities, is one of the finest values in the business.The layout has been elegantly designed to be both functional and visually appealing while also ensuring that you enjoy the finest camping experience possible.However, even though it is the smallest bunkhouse variant, the Surveyor Legend 19BHLE is sturdy enough to weather the long voyage.This vehicle, which has sleeping accommodations for up to six people, will undoubtedly assist you in creating lasting moments!
- We’ve gone into great depth about the Forest River Surveyor in order to assist you in making an educated selection.
- Make sure you read the complete review before making your final decision on whether or not to purchase!
Forest River Surveyor Legend 19BHLE
Forest River Surveyor Specs and Dimensions
- Listed height and weight are 10′ 3″ and 3814 pounds respectively.
- It can accommodate six people at a time.
- Azdel and fiberglass were used for the exterior of the building.
- Four-hundred-and-fifty-pound towing capacity
- GVWR (gross vehicle weight rating) of 4805 pounds
Forest River Surveyor Layout
A total of six persons may be accommodated in this type.The kitchen and living room are both positioned in the middle of the trailer, and both have vinyl flooring installed.The living room contains a U-shaped dinette, which may be used for memorable dinners or competitive game evenings with your friends and family.The dinette may also be transformed into a bed, allowing for sleeping accommodations for up to two individuals.
- The kitchen is equipped with a sink, a refrigerator, a convection microwave, and two oven burners, allowing you to whip up a great breakfast before you begin your day’s work or travel.
- Keep your favorite drinks and snacks in the refrigerator so that you may enjoy them during your journey.
- In the front of the RV, there is a bedroom with a queen-sized bed that can accommodate two people.
If you want to unwind after a hard day at work, you may install an entertainment center where you can watch your favorite movie in bed.Towards the back of the apartment, you’ll find the bathroom and bunk beds.Vinyl flooring, a sink, a plastic toilet, a medicine cabinet, a mirror, and a basic fan system are all included in the price of the bathroom.
The bathroom also has a shower with a curtain so that you may shower in complete privacy, as well as a cupboard to put all of your clothing.Finally, the trailer has multiple overhead storage compartments as well as pass-through storage, which you can utilize to store all of your major camping goods in one place.
Does the Forest River Surveyor Come With Appliances?
The Forest River Surveyor is equipped with a number of different equipment.A 13,500 BTU air conditioner, a 22,000 BTU furnace, and a digital wall thermostat are all included to ensure that you are comfortable in any weather situation.In addition, buyers have the choice of selecting between an electric or gas water heater, as well as between an electric or gas flush mount refrigerator.During the chilly winter evenings, you can quickly take a warm shower thanks to the hot water heater, and the refrigerator with eight cubic feet of space allows you to have all of your favorite foods on hand.
- It also has a convection microwave and a two-burner range top, so you can whip up or heat up delicious meals whenever the mood strikes you.
- A USB charging port and radio are also included, with an optional HDTV entertainment center available as an option.
- If you want to catch up on all your favorite programs while on the road, this TV is mounted above the queen bed.
However, it can also be rotated to face the dinette area.
Who is the Forest River Surveyor Best For?
The Forest River Surveyor is a vehicle built for families that like outdoor activities.It has luxurious features and an efficient design that allows it to seat up to six people while also increasing comfort, resulting in an exciting camping adventure.Furthermore, this model is pet-friendly and has leash connectors as well as pet dishes, allowing you to bring your four-legged buddy along on your journey!You should consider the Forest River Surveyor as your camping destination if you desire a calm and enjoyable camping experience.
- You will travel in supreme comfort thanks to the trailer’s bunk beds, couch bed that can be converted into a queen bed, and queen bed.
Popular Features
This Forest River model is ideal for individuals looking for a bungalow on wheels since it is lighter, shorter, and lets users to enjoy an on-the-go lifestyle without sacrificing comfort. Some of its most well-liked characteristics are as follows:
Comfortable Bedding
In the front of the room, there is a magnificent 60 x 80 queen bed that is the right size and guarantees that customers receive a good night’s sleep.The convertible sofa bed has been created in an innovative way that makes efficient use of the available couch space.Its ‘Latch & Catch’ mechanism makes it exceptionally simple to use.In addition, the property includes exceptionally comfortable Platinum furniture as well as enough bedroom storage, including big storage units behind the queen bed and under the bed.
Large Storage Space
The Forest River Surveyor has a lot of storage capacity, thanks to its various overhead compartments and pass-through storage, which you can use to store all of your larger camping items.Ample storage space is provided in the huge washroom, where you can keep your clothing and toiletries organized.Finally, the kitchen is outfitted with shaker-style cabinets with domestic wood drawers that are guided by ball bearings.
Spacious Washroom
In the back of the trailer, the washroom is equipped with vinyl flooring, a plastic toilet, a sink and medicine cabinet, as well as a mirror and a standard ventilation system. After a long and exhausting day of action, you may clean up comfortably in the 38″ shower room and then relax beneath the awning with your family while enjoying the fresh air.
Included Safety Features
In the rear of the trailer, the washroom is equipped with vinyl flooring, a plastic toilet, a sink and medicine cabinet, as well as a mirror and a conventional vent. The 38″ shower room allows you to clean up comfortably after a long and exhausting day of action before relaxing beneath the awning with your family.
Quality Construction
Models in this class that are both lightweight and luxury are constructed with aluminum cages, which provide the strongest structural integrity possible. In order to give optimum endurance, it has a completely walkable roof, 16″ aluminum trusses, and 3/8″ decking, while its fiberglass exterior provides good sound absorption and a quieter trailer overall.
Azdel Exterior
The Azdel exterior of this trailer is completely water-resistant and has double the insulating value of a standard trailer’s exterior.To name a few advantages, Azdel composite panels provide great insulation while being much lighter than wood and rot-resistant.Moreover, they are not destroyed by thawing and freezing, nor are they impacted by variations in relative humidity.The fiber-based structure of Azdel also offers a robust layer that resists punctures and tempers impacts, resulting in a trailer that is very durable and flexible.
Additional Safety Equipment
Some additional safety equipment is included with the trailer, such as a fire distinguisher, an LP leak detector, a smoke detector, and a carbon monoxide detector, among other things. A ground fault electrical circuit, a deadbolt door lock, tinted safety glass windows, heavy-duty safety chains, and a breakaway switch are all included in the package.
Aspects to Improve
Every coin has two sides, just as every other object. In a similar vein, the Forest River Surveyor has various shortcomings and characteristics that might be addressed, such as the following:
Quality Control
Since the majority of customers reported small difficulties, such as the TV mount not being screwed into the frame and the curtain rods being a little twisted, Forest River should work on improving their quality control.The curtain rod, on the other hand, may be simply changed.Some users also reported that the trailer smelled a little septic at first, but that the smell subsided and restored to normal after a while.
Warranty
The majority of consumers complained that their warranty concerns were not resolved quickly and that it was nearly hard to get in touch with Forest River for help. One customer said that it took a month before their dealer would accept repair work, so make sure you acquire your vehicle from a trustworthy dealer before making your decision.
Refrigerator Quality
The Surveyor Legend might benefit from the inclusion of a higher-quality refrigerator. Some customers complained that their refrigerator had lighting issues and was a little noisy, while another said that it turned on but didn’t cool down when it should have. All of these faults, on the other hand, may be readily resolved under the warranty.
Comparison Overview
Despite the fact that the Forest River Surveyor Legend represents outstanding value for money, there are a few alternative models that are worth considering. Several different travel trailers were compared to the Surveyor in order to guarantee that you make the best option possible:
Forest River Coachmen vs. Surveyor
Both the Forest River Coachmen and the Surveyor feature floorplans that are essentially identical, consisting of a kitchen, a bathroom, and a front bedroom.All of the models include an aluminum frame and an Azdel substrate, which offers long-term durability as well as flexibility and dependability in use.Nonetheless, the Coachmen has some concerns with tongue weight, which may be resolved by keeping additional items in the bedroom.It also has an aluminum skin, whereas the Surveyor has a fiberglass skin, among other differences.
- Legend of the Forest River Surveyor 19BHLE
Keystone Cougar vs. Forest River Surveyor
The Keystone provides larger storage capacity and more features than the Forest River Surveyor, including additional power outlets, which makes it a better choice for long-term storage.In addition, the Cougar offers a number of choices that make the trailer more pleasant to ride in.It also includes a configuration that provides more privacy for the parents while still providing separate room for the children.The Surveyor, on the other hand, has an open concept floor design and claims substantially higher durability and high-quality construction than the other two models.
Bottom Line
The Forest River Surveyor Legend 19BHLE, which can accommodate up to six people, requires a tow vehicle with a towing capacity of at least 4500 pounds.Adult-sized bunk beds, a huge washroom with additional storage, a convection microwave oven, a deep dinette slide-out, and a queen bed positioned beneath the ‘Stargazer’ front window, this unit is built to last and is ideal for creating lifelong experiences with your family and friends.It is small and light, making it exceptionally easy to tow, and it features excellent craftsmanship throughout the inside.Forest River Surveyor is an excellent choice for those seeking a camping experience that is superior to all others.
People Also Ask
The process of selecting the trailer that best meets your needs may be quite complex and time-consuming, especially if you’re doing so on your own for the first time. We’ve answered some of the most often asked questions regarding the Surveyor to make sure you don’t wind up squandering your money:
What Size Are the Mattresses in a Surveyor By Forest River Travel Trailer?
Each of the beds in the Forest River Surveyor is 75 inches in length and 60 inches in width. A travel trailer’s mattress thickness is determined by the quantity of accessible space inside the vehicle’s interior.
Where Are Forest River Surveyor RVs Manufactured?
Forest River purchased the Dynamax Corporation in 2011, a company that specializes in the manufacturing of luxury motorhomes. Its operations were expanded by the addition of manufacturing facilities in Hemet, California; White Pigeon, Michigan; and Silverton, Oregon; all of which were completed in 2014.
How Long is the Forest River Surveyor?
The Forest River Surveyor is available in a variety of lengths, depending on the model. Depending on the model, the shortest model is 23’4″ long and the longest model is 37 feet long.
How to Turn on Gas Water Heater For the Forest River Surveyor
Using these simple instructions, you can turn on your gas water heater:
- Refer to the user handbook for your RV to find the location of the gas water heater
- Check to see that the bypass valve is in the correct position.
- Activate the valve and enable the water to flow into the primary storage tank
- Fill the freshwater tank with water and turn on the hot water faucet.
- Allow the water to fill until it reaches the fill line, and then turn on the natural gas water heater.
How to Turn on Docking Lights the Forest River Surveyor
Because the switch for the docking lights is positioned in a different location in each model, you’ll need to consult your user manual for specifics. The docking lights, on the other hand, are powered by the safety light connection that is located in the seven-way connector.
What is the Forest River Surveyor Arctic Package?
The Forest River Surveyor Arctic Package comprises of heating pads installed on the elbows of sewage drains, as well as on water and holding tanks, among other things. These heating pads are activated when the temperature drops below freezing and maintain a temperature of around 45 degrees Fahrenheit.
How Big Are Slide Outs On the Forest River Surveyor?
The size of the slide-out is determined on the model of Forest River Surveyor being used. All slide-out systems, on the other hand, are electrically powered, employ an electrical ball screw, and are guided by a rack and pinion system.
Where is the Fuse For the Electric Trailer Hitch On a Forest River Surveyor?
In your Forest River Surveyor, the electrical breakers and fuses should be situated in the unit’s electrical compartment, which should be easily accessible.There should be a storage compartment for this item in one of the trailer’s external storage compartments; it is most likely to be found in the front compartment beneath the hood.Make sure, however, that you consult your user manual for the precise position of the button.
How Tall is the Forest River Surveyor?
The Forest River Surveyor’s height varies depending on the model being used. When it comes to height, the smallest trailer stands at 10’3″ and the tallest trailer stands at 11’5″.
What Type of Roof Does Forest River Put on the Surveyor?
Each Forest River Surveyor is built with a totally walkable roof made of 3/8″ decking and 16″ aluminum trusses to provide maximum durability and long-lasting performance. The trailer also includes an Azdel exterior, which is water-resistant and provides great sound attenuation for the passengers.
Where is the Forest River Surveyor Black Tank Vent?
The Forest River Surveyor’s black tank vent is positioned on the top of the black tank, towards the top of the tank. It expands and leads all the way up to the ceiling of the RV from the tank. On top of that, it has a cap that can be removed.
How to Fill a Fresh Water Tank on a Forest River Surveyor Camper
It is possible to fill the fresh water tank on your camper by doing the following steps:
- Select a fresh water hose and connect one end of the hose to the fresh water or city water supply intake valve
- Connect the second end of the hose to the water spigot.
- Keep an eye on the tank indications so that you can see when the tank is getting close to being completely empty.
- Start by turning on the water hose from the source and allowing it to fill the tank.
Where Are Forest River Surveyor Campers Built?
Although Forest River Inc.’s headquarters are in Elkhart, Indiana, the company has manufacturing plants in White Pigeon, Michigan, Silverton, Oregon, and Hemet, California, as well as other locations around the United States.
Operating hot water heater – Forest River Forums
07-11-2011, 05:33 PM | 1 |
Junior Member Join Date: Jul 2011 Posts: 2 | Operating hot water heater It’s been awhile since I operated by Forester 2005 hot water heater. My brother has the RV now in Virginia and needs to know the steps to take. Can anyone out there help me out. 7/11/11 GJohnson |
07-11-2011, 06:03 PM | 2 |
Senior Member Join Date: Dec 2007 Location: Eastern Oklahoma, USA Posts: 2,618 | The following instructions are for a Surburban DSI water heater with gas/electric option. Gas Operation 1st. Make sure the heater tank is full. 2nd. Open the propane tanks slowly. 3rd. Turn on switch inside trailer marked Water Heater. A red light will come on. The light will stay on until the water heater lights. The water heater will make three attempts to light then it will need to be recycled. Lighting the stove first will help purge the gas line of any air which will help the water heater light faster. 4th. Wait about 20-30 minutes and enjoy hot water! Electric 1st. Make sure the heater tank is full. 2nd. Check to make sure the breaker inside trailer marked water heater is on. 3rd. Outside the trailer, behind the access panel there is a small black rocker on/off switch. Usually located behind some tubing in the lower left. There may be a pin in the switch locking it closed. Remove the pin and turn switch to the on position. 4th. Wait about 30 minutes and enjoy hot water! You may use the gas or electric seperately or both at the same time, which will help with a faster recover time when taking showers, etc. Hope this helps. |
07-11-2011, 07:12 PM | 3 |
Site Team – Lou Join Date: Oct 2009 Location: South Eastern PA Posts: 23,212 | And if THAT does not work (and it certainly should!) here is the manual. WARNING: This photo shows a recipe for disaster since the AC power switch is on and the anode is out. If there is power on this guy’s camper he will be buying a new AC heating element. Attached Thumbnails Lou, Laura, & Freya the wonder dog 2008 GMC Sierra 3000HD Crewcab SB Allison Duramax 2019 Flagstaff 8529FLS – Pullrite 3300 HAM CALLSIGN – KC3FFW |
01-27-2012, 10:28 PM | 4 |
Senior Member Join Date: Jan 2012 Location: Smyrna, Tennessee Posts: 445 | Sitting here thinking about what I don’t know about on my new used TT. I thought, oh, the hot water heater. I got a quick walk through at the dealer’s before I towed out the other day, I know where the little red switch is, the breaker for the AC, and how to get to the bypass valves. I didn’t ask a question about the operation of it. So.I found what I need to know on this thread. I downloaded the instructions onto my laptop into a file. We didn’t fire up the hot water heater on the walk through because it being winterized. Now I know how. On the way home I noticed my access door hanging down. I had lost the fastener to it. I went to Lowe’s, got a screw, pal nut, washer and a wingnut. Problem solved. 2009 Palomino Puma 25RS 2007 Chevrolet Silverado Prodigy P2 Brake Controller |
01-27-2012, 11:31 PM | 5 |
Senior Member Join Date: Jan 2012 Location: Smyrna, Tennessee Posts: 445 | I haven’t been out to check what model etc. I have, know I have a red switch.now question: Quote: You may use the gas or electric seperately or both at the same time, which will help with a faster recover time when taking showers, etc. Question.on the switch to use the option mentioned above.does the switch still have to be in the on postion? I am going to look at my unit tomorrow from the outside.back later. 2009 Palomino Puma 25RS 2007 Chevrolet Silverado Prodigy P2 Brake Controller |
01-28-2012, 12:26 AM | 6 |
Senior Member Join Date: Oct 2011 Location: NEPA Posts: 1,471 | I think you’re confusing yourself. The red switch with the light inside is to turn the water heater on with propane only. The black switch outside on the body of the heater is to turn it on using electric only. You can use either separately, or use them both together to make your water heat faster. 2015 XLR Hyperlite 30HFS5 (mods being performed regularly) 2009 Salem LA 292fkds (gone) Nights- (’12)23 (’13)23 (’14)15 (’15)31 (’16)27 (’17) 20 (�18)21 (�19)23 2019 Honda CRV (camping support vehicle) 2014 Harley Davidson FLHX (XLR cargo) 2011 Ram 2500 CC 4X4 CTD, B&W Companion (toy hauler hauler) |
01-28-2012, 09:32 AM | 7 |
Senior Member Join Date: Jan 2012 Location: Smyrna, Tennessee Posts: 445 | Thank you, think I got it figured now. If it is raining.I will use the one inside, if I don’t want to go outside to get wet. If I get to worrying about my propane useage, I will go outside and flip the switch to use the AC. I know that I won’t use that much propane anyway.thanks so much. I can’t wait to dewinterize it and get in a campground. I drove to one near our house yesterday and just walked around the campsites. I talked to one lady who was setting up her pup for the weekend. It made me want to go home and hook up to my TT. This forum has saved me from having to go up to the dealer’s and bugging the repairman for these questions. 2009 Palomino Puma 25RS 2007 Chevrolet Silverado Prodigy P2 Brake Controller |
01-28-2012, 12:11 PM | 8 |
Senior Member Join Date: Jan 2012 Location: Smyrna, Tennessee Posts: 445 | I went out and checked my hotwater heater, found the model number, etc. It is a 6W6 DE. I found the switch on the left side.has an off and on, so simple. The dealers had it in the off position. I know when we did the walk through with the service man I opened the converter box and flipped the breaker to off so I wouldn’t inadvertently have it going with no water in it. I don’t guess then I had noticed the little switch in the outside panel. 2009 Palomino Puma 25RS 2007 Chevrolet Silverado Prodigy P2 Brake Controller |
01-28-2012, 01:59 PM | 9 |
Site Team Join Date: Jan 2007 Location: Camano Island, Washington Posts: 27,477 | just realize that it takes longer using electric, over propane, to heat the water. just like the fridge. a lot of us first heat the water with propane and then switch to electric to maintain it, if you have hookups. since we rarely have hookups, we use propane almost all the time and it uses very little propane, unlike the furnace. Dan-Retired California Firefighter/EMT Shawn-Musician/Entrepreneur/Wine Expert and Zoe the Wonder Dog(R.I.P.) 2016 PrimeTime TracerAIR 255, pushing a 2014 Ford F150 SCREW XTR 4×4 3.5 Ecoboost w/Max Tow Package 4pt Equal-i-zer WDH and 1828lbs of payload capacity |
Posting Rules |
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On code is On HTML code is OffTrackbacks are Off Pingbacks are Off Refbacks are Off Forum Rules |
Forest River Water Heater Bypass: Where Is The Bypass Valve?
The game of hide and seek appears to be the most popular among RV makers.That is where they conceal the critical components, and you will have to spend hours searching for them.What makes the game even worse is that the company and the owner’s manual do not always inform you where the various components are located in the game.What is the location of the water heater bypass valve?
- The bypass valve for your water heater may be situated under your stove in certain models.
- To get to it, you must first remove the panel by unscrewing the screws holding it in place.
- Whether the panel does not contain screws, you will need to remove the two drawers adjacent to the stove to see if you can gain access to the panel that way.
Accessing vital components in recreational vehicles might be difficult at times, but keep reading our post since it contains some important pieces of information that will make your search simpler and faster.pause for a few moments to consider if the forthcoming facts will assist you in resolving your game of hide and seek.Bypassing the RV Water Heater (No.
101)
How does a Hot Water Bypass Valve Work?
This valve functions in the same way as any other valve that handles water or other liquids.It must be rotated in such a way that water may travel through it without entering the water heater itself.Alternatively, it must be closed in order for the water heater to work normally.In some models, the bypass valve is located immediately next to the water heater, while others are located behind it or outside the unit, where you must reach the bypass valve through an access panel in order to operate it.
- The valve is operated manually, and you must physically turn it in order to open or close the system.
- When you have this valve open, you must also close the cold and hot water valves on your plumbing system.
- Once you’ve done that, the water heater in your RV will be disconnected from the rest of the plumbing system and will no longer receive water.
Then you don’t have to rely on this valve all of the time.Typically, it is employed throughout the process of winterizing or storing your recreational vehicle.Using the valve, you may drain the tank and store your RV for the winter.
To re-use your RV, you just flush away the anti-freeze first, then close the bypass valve and open the other two valves so that you can have hot water once again from the system.
Why Bypass the RV Water Heater?
The solution to this question is straightforward and straightforward.Water expands as it freezes, as you may be aware.The water in your water heater will freeze and expand if it is not properly insulated throughout the winter.If you do not remove the water from your water heater and it is not properly insulated, it will harm the device.
- It prevents water from entering the heater, allowing you to empty it and preserve the component from any potential harm that might occur.
- When ice forms in the water heater, the valve helps to redirect the water supply while also ensuring that all components of the water heater are protected from harm.
- The fact that you have to be careful about this when purchasing an RV is something you should be aware of when purchasing an RV.
There are so many of these extra activities that you must complete that you would not typically have to complete with a residential water heater or other components.A checklist should be created for when you are preparing to winterize or store your recreational vehicle (RV).As a result, you will not neglect or ignore any of the important components that require specific attention, such as the water heater.
Double-check your checklist to ensure that everything has been completed so that you may have a little piece of mind during those long, cold months when you are not using your RV or camper.
Where is the Water Heater Bypass Valve on an RV?
That is an excellent question.Every manufacturer has a specific location in mind for these valves, and they are not universally applicable.The location of an RV is entirely up to the discretion of the particular RV manufacturer, who has a plethora of options for hiding them.Then don’t anticipate to discover those valves in the same spot as you would have found them in a prior model you may have purchased.
- Because of advancements in RV production, it is possible that subsequent models may be manufactured in other regions.
- In most cases, however, the water valves are located near the water heater.
- One piece of advice: check your owner’s handbook to see whether the firm has already provided you with the location information.
Because various manuals do not always specify everything and their location, this might be a hit or miss experience for some people.When it comes to this issue, the second most important question is how to get access to them.Some models require you to remove the panel under the stove before they can work.
That means you’ll have to crawl down on your hands and knees and remove the screws before removing the panel itself.After that, you can try to see if you can get close enough to them.Other variants may necessitate the removal of two drawers adjacent to the stove in order to get access.The only difference between this access and the prior access is that you do not have to remove screws, merely drawers, like you did with the previous access.If you’re lucky, the valves may be located outside, near other controls, making access to them a breeze.
All that would be required would be the removal of the access panel and the manipulation of the valves.In order to access those valves, one individual recommended knowing how to crawl beneath your RV, having long arms, and having enough of light available.The position of the valves will be determined mostly by the size of your recreational vehicle.Its overall design, as well as the number of built-in functions.
Access, on the other hand, is a whole other situation.
Forest River Water Heater Bypass
This is a difficult question to answer since the response is ″it depends.″ Forest River RV models and floor designs are available in a variety of configurations.Despite the fact that they are all manufactured by the same manufacturer, the specific position may vary across models.Those valves may be situated near the rear of the water heater in one configuration.It would be necessary to go down on your hands and knees.
- Then take off any panels or drawers and use your hands to navigate your way around.
- If you manage to track them down, you’re in luck.
- In other Forest River vehicles, the valves are located on a manifold that can be accessed from the exterior of the vehicle.
It will be easier to operate them as a result of this.You may also be the victim of a nasty trick that is perpetrated on you.Some Forest River and other manufacturer’s recreational vehicles (RVs) do not have a bypass valve installed.
It is possible to spend hours searching for something that is not there.That is why certain recreational vehicles (RVs) are equipped with a bypass valve, which is not mentioned in the owner’s handbook pages.RV manufacturers put their clients through a fantastic game in order to gain their business.However, it is reasonable given the large number of options available in RVs.The enterprises have just a little amount of available space to operate with.
RV hot Water Heater Valve Position
This is not often a difficult situation to cope with.When it comes to the location of the bypass valve on the waterline, it should be placed prior to the water heater as shown.The issue is, what factors do RV manufacturers take into consideration when installing a water heater?This might be in front of the unit, behind the unit, or outside of the RV unit.
- The annoying part is that you may have to take off doors, drawers, and panels before you discover the appropriate one for your needs.
- When you’re finished, make a note of where you put it so you can find it more quickly the next time you need to use the bypass valve.
- The position for engaging and disengaging the valve may alter depending on which one is being used.
The valve may be of the push-button variety, in which case you must press in to engage it and then push again to disconnect it from the system.Alternatively, it might be a straightforward typical valve design in which you spin it to either cut off or open the bypass.It is closed if it is perpendicular to the line, whereas it is open if it is parallel to the line.
We are unable to provide specifics in this area because the designs are not universal and the same for every recreational vehicle.There are other models of Forest River, as well as other models, that you may examine to see what they did in your situation.Once you’ve seen the system, you should be able to figure out what to do because it is a fundamental system that is employed in all situations.
How do you Get a Water Heater out of Bypass Mode?
The work is straightforward and straightforward to do.Your 5-year-old should be able to do the task with little difficulty.The first step would be to block the bypass valve, which would prevent water from flowing around the water heater and into the house.Next, open the cold water valve that has been closed and allow the water to begin filling the heater as it has been closed.
- While the water is doing its thing, turn on the hot water valve to conserve energy.
- When the cold water has finished heating, it may be used in your shower or faucets without being restricted.
- The difficult aspect is determining if you have a one-, two-, or three-valve system.
Occasionally, the bypass valve is positioned on the cold water line, where it connects to the bypass hose, although this is not always the case.That is the system with a single valve.It features two valves, one at the cold water inflow point and another at the bypass line, which are connected together.
With a three-valve system, there are three valves, with two of them located in the same location as the two-valve system and one additional valve located on the hot water line.It is, once again, really simple to complete.You turn the appropriate valve or valves to stop the system while simultaneously re-opening the ordinary operation of your hot water heater.
How to Bypass RV Water Pump
To avoid being overly simplistic, the most effective approach to bypass your water pump is to get a water pump bypass kit.These kits are intended to provide you with the hoses and valves you need to skirt around your water pump when the situation calls for it.The hazard of utilizing these kits is that many of them come with plastic valves, which can cause serious injury or death.While it may be less expensive to purchase and faster to install, it is also a highly ineffective method of bypassing your water pump.
- Plastic valves and fittings tend to wear out and break more quickly than brass ones.
- Consider purchasing one of the kits that includes brass fittings, if possible.
- This will save you a lot of money in the long run in terms of replacement work.
The majority of businesses that sell RV parts and accessories will have these kits available for purchase.Some water pumps are equipped with built-in bypass mechanisms, which make life a whole lot easier for the user.Consult with your dealer or a reputable mechanic to determine the best course of action to take in this situation.
They will have the necessary tools and skills to walk you through the process and ensure that the correct parts are placed in the proper manner.
How to Bypass RV Water Filter
It is critical that a bypass system be installed in conjunction with this component.What the bypass will do is prevent any anti-freeze from accessing this area of the system that you may have pumped through your RV for winter storage.What we’ve discovered are what are referred to as bypass plates.These are simple to install and prevent the flow of anti-freeze, ensuring that the liquid travels in the direction you wish.
- According to the manufacturer, these plates are constructed of stainless steel and should last you a lifetime if properly cared for.
- They are intended to suit both 10-inch and 5-inch housings, and they should be simple to install without the use of any special equipment.
- A gasket has been supplied to ensure a more secure fit.
Afterwards, if you do not intend to use your water filter, you may simply place this plate and forget about it.You will only need to delete it when you wish to utilize the filter, which is rarely.Unscrewing and putting the filter and gasket within the housing, followed by screwing the housing back on, is required for installation of the plate (see illustration).
Simply said, that’s all there is to it.When a style works well and provides you with a variety of possibilities, it is difficult to top simplicity.
How to Install RV Water Heater Bypass Kit
That is something you should take into consideration.In the event that your RV’s water heater does not have a bypass system, you should consider installing one.They can save you a lot of money on anti-freeze because it will take more gallons of the product to fill your water heater than it does with regular anti-freeze.Then you won’t have to spend money on replacing any burst or broken water pipes, or even on replacing the tank itself.
- If your RV does not already have a bypass system, here are two extremely compelling arguments in favor of having one installed.
- If you are proficient with tools and have experience working with plumbing, installing it should not be too difficult.
- Fortunately, you will not be dealing with any power in this location.
Anyone can learn how to perform this operation safely and without causing oneself injury.Following the purchase of the appropriate bypass kit, the following actions must be completed: Disconnect all of the current water lines and fittings from the water heater.2.
Do not forget to indicate which line is cold and which line is hot on the diagram.If they haven’t previously been labeled.Using Teflon tape, secure the male end of the fittings to the fittings’ female end.There is no way to skip this step since the Teflon tape will creep into the grooves and obstruct the water’s escape route.3.
Replace the old fittings with the new ones in the same location.Valve installation is straightforward, and you should make certain that the screws are tightened down sufficiently.You don’t want them too tight, but you also don’t want them too loose.As soon as you are finished, check to see that the bypass male ends on both valves are facing in the same direction.
4.There is no need to use Teflon tape on the male bypass ends of the bypass cable.Install the bypass hose on either side of the new bypass route by screwing it in place on each side.
To properly tighten, simply crank the nut one half turn past finger tight.5.Reinstall the old water heater fittings and link the water lines to the water heater.Once it is completed, you will be ready to proceed.
When it’s time to winterize, simply shut off the valves and open the bypass valve, and you’ll have saved money.It is recommended that you carefully study the instructions included with the kit package to ensure that you understand exactly where to place the old fittings.Even though these should be universally applicable, be prepared in the event that they are not.These bypass kits should be available for purchase anywhere plumbing supplies are sold, as well as at RV accessory retailers in your area.
Prices should be compared for the best deal.
Some Final Words
Owning and touring in an RV may be a great deal of enjoyment.You get to go to areas you’ve always wanted to see while saving money by not having to pay for hotel accommodations.Those same joys, on the other hand, can cause a great deal of frustration.The hassles might arise while trying to locate critical components when storing or using your recreational vehicle.
- The water heater bypass system is an example of this.
- Although it is a straightforward system, it may prove to be the most difficult component to locate.
- RV manufacturers hope you have a good time enjoying children’s activities like hide and seek.
electric water heater on and off switch
03-31-2018, 06:20 PM | 1 |
Member Join Date: Jul 2012 Location: ma. Posts: 53 | electric water heater on and off switch I picked up a 2018 cedar creek silverback 35IK a few days ago. The water heater works on gas, but not on electric. When I called the dealer he told me there was a switch on the heater and also a switch somewhere inside. The only switch I have found inside the unit is for the gas water heater. You can call me blind but please tell me where I can find the switch. Thanks for your help! |
03-31-2018, 06:23 PM | 2 |
Senior Member Join Date: Jan 2011 Posts: 948 | electric water heater on and off switch Go out and remove the black water heater access panel, in the bottom left hand side you should see an on and off switch. Make sure the heater is full of water before turning it on, otherwise, you will burn out your heating element. Lowbubba What could go wrong? |
03-31-2018, 08:53 PM | 3 |
Senior Member Join Date: Jun 2013 Location: Between Pickles Gap and Toad Suck, AR Posts: 6,070 | Quote: Originally Posted by jeffscuda I picked up a 2018 cedar creek silverback 35IK a few days ago. The water heater works on gas, but not on electric. When I called the dealer he told me there was a switch on the heater and also a switch somewhere inside. The only switch I have found inside the unit is for the gas water heater. You can call me blind but please tell me where I can find the switch. Thanks for your help! Dealer wrong. Electric on/off switch only on face of WH (Unless you want to get on the floor and turn off the circuit breaker to it, but no switch). It’s behind the WH plate outside. Inside is propane on/off switch. Both can be on at same time. Both can be off at same time. Either can be on by itself. Propane switch has DSI/FLT light so if it stays lit, your propane didn’t fire and isn’t on. ″Next to prayer, fishing is the most personal relationship of man″ Herbert Hoover ″American by Birth, Southern by the Grace of God″Lewis Grizzard FROG AR-0019-242 2016 GMC Denali 3500Dually-2017 CC 36CKTS |
03-31-2018, 09:39 PM | 4 |
Senior Member Join Date: Jun 2012 Posts: 10,907 | If you have a Suburban, your outside switch is here: You most likely do NOT have an inside switch. If you did, it would be next to the gas switch, something like this: although they could be on your control panel with all the other stuff (tank heaters, slide controls, etc.) rather than a separate panel like the one pictured. 1988 Coleman Sequoia – popup (1987-2009) – outlasted 3 Dodge Grand Caravans! 2012 Roo19 – hybrid (2012-2015) 2016 Mini Lite 2503S – tt (2015 -?) 2011 Traverse LT, 3.6L, FWD 2009 Silverado 1500 Ext Cab, 5.3L, 4×4, 3.73 2016 Silverado 2500HD Dbl Cab, 6.0L 4×4, 4.10 |
04-01-2018, 04:14 AM | 5 |
Site Team Join Date: Nov 2010 Location: Northeast Louisiana Posts: 28,280 | If you have a Suburban dual power source tank type water heater in your RV, we keep a very detailed operational FAQ on the SWDE and SWDEL models at this link below: Hope it helps 2011 Flagstaff 831 RLBSS When I was young, I was poor. But after many years of hard work, I am no longer young. |
04-01-2018, 11:54 AM | 6 |
Junior Member Join Date: May 2014 Posts: 1 | I have a 2017 Silverback 31RK. I bought it off the lot brand new. When I got to our RV park, my water heater had the same symptoms as yours; no hot water on electric but the propane side worked. I did some trouble shooting thinking I had a burned out element. That tested good. I had to drive it back to the dealer, Grrr, for them to work on. They found the thermostat on the heater was bad. They had to replace it. All under warranty but a hassle none the less. The factory had also installed the stove vent in backwards so the air blew down on the stove extinguishing the stove burners. The dealer also fixed that. And I was told Cedar Creek was near the top of Forest River�s products. |
04-01-2018, 01:48 PM | 7 |
Senior Member Join Date: Feb 2013 Location: Pfafftown NC Posts: 2,353 | Quote: Originally Posted by schwabmt . And I was told Cedar Creek was near the top of Forest River�s products. Top of the needs most repairs after you take it home list! |
04-01-2018, 02:04 PM | 8 |
Just as confused as you Join Date: Aug 2013 Location: south central Wisconsin Posts: 5,108 | jeffscuda, check the high temperature limit resets. There is one each for gas and electric under the black square cover at the upper left of rockfordroo’s picture. Just push the center of the round things. Richard & Jill 2014 Flagstaff 832IKBS Classic Super Lite 2018 Silverado 1500 Crew Cab Z71 4WD All Star Edition Camping since 1989, Seasonal since 2000. Car Shredder Op/Tech, Scrap Metal Recycling – retired |
04-01-2018, 04:12 PM | 9 |
Senior Member Join Date: Nov 2017 Location: Dayton Ohio Posts: 2,436 | Just got back from the maiden voyage in our cc 34re. There is an on off switch for the gas in the coach panel. Electric switch left of the drain plug. Not sure if both will run at the same time. Note above the electric switch are the two reset buttons. Ours is 12 gallons. Plenty for two. |
04-01-2018, 04:18 PM | 10 |
Senior Member Join Date: Oct 2012 Posts: 187 | Quote: Originally Posted by Evereddie Top of the needs most repairs after you take it home list! So totally negative. We are in our third Cedarcreek and have loved all three of them. I would never keep an RV that I didn’t really like. Lawrence, JD and Bear 2017 Champagne 38EL Our Rolling Earthquake |
04-01-2018, 04:38 PM | 11 |
Senior Member Join Date: Aug 2015 Location: Springfield, MO Posts: 455 | Quote: Originally Posted by tomkatb Just got back from the maiden voyage in our cc 34re. There is an on off switch for the gas in the coach panel. Electric switch left of the drain plug. Not sure if both will run at the same time. Note above the electric switch are the two reset buttons. Ours is 12 gallons. Plenty for two. tomkatb, yes you can use electric and propane at the same time if you need quicker recovery 2014 Chevy CC Duramax 4X4 Long Bed 2017 Cedar Creek 36CKTS MORryde independent suspension with disc brakes |
04-01-2018, 04:47 PM | 12 |
Senior Member Join Date: Aug 2015 Location: Springfield, MO Posts: 455 | Quote: Originally Posted by schwabmt I have a 2017 Silverback 31RK. I bought it off the lot brand new. When I got to our RV park, my water heater had the same symptoms as yours; no hot water on electric but the propane side worked. I did some trouble shooting thinking I had a burned out element. That tested good. I had to drive it back to the dealer, Grrr, for them to work on. They found the thermostat on the heater was bad. They had to replace it. All under warranty but a hassle none the less. The factory had also installed the stove vent in backwards so the air blew down on the stove extinguishing the stove burners. The dealer also fixed that. And I was told Cedar Creek was near the top of Forest River�s products. WOW, 2 items wrong with a 2017 and you are complaining? Not to mention the water heater thermostat was a Suburban problem. 2014 Chevy CC Duramax 4X4 Long Bed 2017 Cedar Creek 36CKTS MORryde independent suspension with disc brakes |
04-01-2018, 07:21 PM | 13 |
Senior Member Join Date: Jun 2013 Location: Between Pickles Gap and Toad Suck, AR Posts: 6,070 | Quote: Originally Posted by schwabmt I have a 2017 Silverback 31RK. I bought it off the lot brand new. When I got to our RV park, my water heater had the same symptoms as yours; no hot water on electric but the propane side worked. I did some trouble shooting thinking I had a burned out element. That tested good. I had to drive it back to the dealer, Grrr, for them to work on. They found the thermostat on the heater was bad. They had to replace it. All under warranty but a hassle none the less. The factory had also installed the stove vent in backwards so the air blew down on the stove extinguishing the stove burners. The dealer also fixed that. And I was told Cedar Creek was near the top of Forest River�s products. You ought to sell it and get a better one. ″Next to prayer, fishing is the most personal relationship of man″ Herbert Hoover ″American by Birth, Southern by the Grace of God″Lewis Grizzard FROG AR-0019-242 2016 GMC Denali 3500Dually-2017 CC 36CKTS |
04-01-2018, 07:35 PM | 14 |
Member Join Date: Oct 2017 Location: Howe, OK Posts: 65 | Hot water switch All kidding aside when we purchased our special order 2013 Cedar Creek Touring Addition we could not get hot water, low and behold they forgot to wire it up. |
04-02-2018, 03:52 AM | 15 |
Senior Member Join Date: Dec 2015 Location: Savannah, GA Posts: 185 | The same happened to us when we took delivery of our CC34RL2. Most likely the water heater is not plugged in to it’s outlet. Access the back of the WH and plug it in to the receptacle found there. CC does not ship units winterized with antifreeze. There is and never has been any water in the system unless your dealer added some. Rather, after pressure and integrity testing, CC leaves the system pressurized with air and does not plug in the WH to prevent destroying the electric heating element should the switch be selected to ON without water in the tank. 2017.5 Cedar Creek 34RL2 2018 F-350 Lariat CC SRW PSD 4×4 USMC Fighter Pilot (Ret) |
04-04-2018, 01:08 PM | 16 |
Senior Member Join Date: Jan 2016 Posts: 239 | I never understood why the don’t wire an inside electric wh switch. I know it would add a little cost but it would be worth it. I’ve added an inside switch to our last two trailers. Steve & Jean Furbaby – T.J. RIP Towmotor – 2013 Chevy LT DRW Duramax/Allison 5er – 2013 Cedar Creek 36CKTS Classic Champagne Touring Edition |
04-04-2018, 01:21 PM | 17 |
Denver To Yuma In 90 Days Join Date: Mar 2018 Location: Yuma, Arizona Posts: 3,882 | The two lighted switches are for the hot water heater in my rig. The one on the gauges is the gas switch. Attached Thumbnails |
04-04-2018, 01:24 PM | 18 |
Senior Member Join Date: Jan 2016 Posts: 239 | That’s good. I wish Cedar Creeks had that from the factory. Steve & Jean Furbaby – T.J. RIP Towmotor – 2013 Chevy LT DRW Duramax/Allison 5er – 2013 Cedar Creek 36CKTS Classic Champagne Touring Edition |
04-04-2018, 01:41 PM | 19 |
Senior Member Join Date: May 2014 Location: Alberta – East of the Rockies, West of the Rest Posts: 1,785 | Quote: Originally Posted by JohnD10 The two lighted switches are for the hot water heater in my rig. The one on the gauges is the gas switch. That’s the way to do it, run the wire from the breaker through the switch to the hot water tank 2018 RAM 5500 Laramie CC Sold: Riverstone Legacy 38RE, 960 Watt Solar, 6×6 Volt AGM Battery Bank, Freedom SW 3012 Inv/Charger Ordered: 2021. |
04-06-2018, 09:20 AM | 20 |
Senior Member Join Date: Dec 2016 Posts: 321 | This whole hot water is perplexing, we have the gas/electric unit and have experienced the same issues as posted. It was solved when we understand the issue. Sadly, one of my areas of expertise happens to be the man-machine interface, also known as the human interface if you are a computer engineer like I am. We have an electric switch, outside of the 5th wheel on an external wall, not in plain view, not with any clear labeling. The gas switch is inside on the control panel. Had you worked for me and brought that schematic in for review and approval, chances are you would not be working for me a lot longer. Our control which is countersunk in the wall and with a door covering it, its at its very best near worthless, its so dark we had to put a light in, IIRC I think only one switch was lighted. The switches are labeled with some kind of lettering that is meaningless to anyone unless you are a code breaker. We pulled all of our switches and installed lighted ones. I have seriously considered coming out of retirement and going to work as a CEO of a RV mfg. I will work for free if they agree to pay me a bonus of 10% of the increased sales and cost savings from better designed and built to equal fewer warrant claims. I can go back over my last 3 RV’s and I am amazed at how much warranty costs there are to companies. First thing I would do would be change the business model from the 50’s model to today’s. Put QC back in the model at origin and not depend solely upon the selling agent to warranty the unit. That would be a start. Don US Army Infantry Retired Texas Hill Country Cedar Creek Silverback 29RE ’19 F 350 CC, LB King Ranch Ultimate |
Posting Rules |
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On code is On HTML code is OffTrackbacks are Off Pingbacks are Off Refbacks are Off Forum Rules |