Replace the water filter in your Samsung refrigerator
There are three different types of Samsung water filters, so you’ll want to be sure you’re getting the right one for your refrigerator before purchasing one. Replacement filters are available for purchase on ouraccessories page if needed. To begin, identify the filter in your refrigerator’s model. You should refer to your user handbook if you are unclear about the location. Then, on the filter itself, look for the model number printed on it. This will inform you of which of the following filter types you will require for your application.
If you’re not sure whether or not you need to replace the filter, look for an indication light on your refrigerator.
If you are about to replace the filter, the light will become purple to indicate that it is time.
You should alter the filter as soon as possible at this point.
- After turning off the water, identify the filter and clean it as needed. If you are unclear of where it is, please refer to your user handbook for assistance. Once you have unlocked the old water filter, remove its lid and swivel it counterclockwise to reinstall it. Afterwards, just pull it straight out of the filter housing to remove it. Prior to placing the new filter in the system, remove the protective cover from the top of the existing filter. Afterwards, insert it directly into the filter housing and turn it counter-clockwise
- Examine to ensure that the lock symbol corresponds to the indication line.
Types of HAFCU1 filters include:
- After turning off the water, identify the filter and clean it as needed. If you are unclear of where it is, please refer to your user handbook for assistance. Using a left-handed twist, you can remove the old filter. This will allow you to access it
- Afterwards, pull it downward to remove it from the filter housing. The replacement filter should be inserted by pushing it up into the filter housing and then turning it to the right. Check to ensure that the notch at the top of the filter corresponds to the arrow on the filter’s housing. Replace your filter and then flush it thoroughly with a few liters of water to wash out any contaminants or air that may have gotten into it. Then, make sure that the water filter light on your refrigerator is turned back on. Please refer to the following sections for further information.
After turning off the water, locate the filter and clean it as necessary. You should reference your user manual if you are unclear of where it is located. Using a left-hand twist, you may remove the old filter. Upon doing so, it will be unlocked. Afterwards, pull it down to release it from the filter housing. Using your fingers, press the new filter upwards and then to the right; this will ensure that it is properly installed. To avoid clogging the filter, make sure it has a notch at the top that matches the arrow on the housing.
Then, make sure that the water filter light on your refrigerator is turned off and back on again.
- If theFilter Resetbutton is accessible on the control panel, locate it and press it. In some cases, it is a secondary function of another button on the panel
- Once identified, press and hold the proper button for 3 seconds until the light turns out
- The filter symbol will either turn off or return to its usual color when the light is turned off. This restarts the timer for the next six months.
Please keep in mind that some models may require you to press two buttons at the same time in order to reset the light. Touch screen models will instead make use of on-screen menus. Consult your refrigerator’s owner’s handbook for detailed operating instructions. The water filter light and timer on your Family Hub refrigerator may be reset by following the instructions outlined below.
- Start by selecting Apps from the Home screen, followed by Fridge Manager
- Then choose Water Filter from the Home screen, followed by Reset and then Proceed. The filter light and timer will be reset as a result of this. If you require a Samsung water filter, you may purchase one by pressing the Buy Filter button after tapping the water filter symbol.
On models RF4289 and RSG309, you may also reset the filter light by pressing the reset button.
- Then, at the bottom of the screen, navigate to and pick theSettingsicon, and then tapWater Filter to begin. As soon as the Water Filter menu appears, press Next three times in the lower right corner of the screen until you reach page 4/4 of the Water Filter menu. Hold the object with your fingertips. Remove and reinstall the water filter until it changes its status, which may be done in the middle of the display. After the message “Filter Replaced” appears and disappears from the screen, tapSave in the lower right corner of the screen.
In order to define what is filtered by a water filter, the National Sanitation Foundation (NSF) and the American National Standards Institute (ANSI) have developed a variety of standards. Samsung’s water filters are Carbon Filters that meet the requirements of the NSF/ANSI 42, NSF/ANSI 53, and NSF/ANSI 401 standards, among other requirements. NSF/ANSI 42 is a standard for food safety and sanitation.
- Filtered to decrease the presence of aesthetically objectionable contaminants like as chlorine and taste/odor
NSF/ANSI 53 is a standard that specifies how a product should be designed, manufactured, and tested.
- Certified to decrease a pollutant that has a negative impact on health. The following substances have been identified as having negative health effects by the United States Environmental Protection Agency (EPA) and Health Canada: Asbestos, Atrazine, Benzene, 2, 4-D, Carbofuran, Chlorbenzene, Cyst (99.99 percent), Endrin, Ethylbenzene, Lead, Lindane, Mercury, O-Dichlorobenzene, P-Dichlorobenzene, Tetrachloroethylene, Toxaphene
NSF/ANSI 401 is a standard for food safety and sanitation.
- It has been proven to lower one or more of the 15 emerging pollutants in drinking water by at least 50%. Pharmaceuticals and chemicals that are not yet controlled by the Environmental Protection Agency or Health Canada include: atenolol, bisphenol A, carbamazepine, DEET, estrone, linduron, nonylphenol, phenytoin, trimethoprim, and trimethoprim sodium.
Check out our troubleshooting guide for assistance if you are having difficulties installing the water filter in your refrigerator.
How to Reset Filter Light on Samsung Fridge [2022]? (Solved)
It is standard on the vast majority of Samsung refrigerators to include filter light indicators, which inform users when it is time to replace the water filter. Moreover, after changing the filter in your Samsung refrigerator, you will have to reset the filter light on the appliance. What, though, is the reason behind this? Generally speaking, a water filter may be used for a maximum of six months before it has to be replaced. Waterline replacement could be essential, though, depending on what sort of water is passing through the waterline in question.
Unless and until you detect a difference in flavor that you would not have noticed without the filter light, you will be unable to identify whether or not your filter requires replacement.
You may also be interested in:How to Reset Your Samsung Refrigerator When you open the door of your Samsung refrigerator, the noise stops.
The Operation of the Samsung Water Filter Indicator
In excellent functioning condition, the Samsung water filter will exhibit a blue or green color, depending on the type that you have installed on your system. The hue changes to orange or light pink after 5 months or 450 gallons of water has been added. This hue shift is typically a sign that it is time to upgrade the water filtration system in your home or business. After 6 months or 500 gallons of water have been utilized, the water filter indicator will turn red on your water filter. When you see this red light, it indicates that it is time to replace the water filter.
Furthermore, if you reside in a place where there is an excessive amount of limescale in the water supply, you will need to change your water filter more frequently than every six months.
Indicator for the presence of a water filter
After five months or 450 gallons of water, the water filter indicator light must first become orange, and then red after six months or 500 gallons of water. After turning orange, the light must next turn red. The hue of the light is determined on the model that you have purchased. It might be either green or blue in color. Identifying the multi-function button or buttons on your display that control the water filter indicator is required in order to restore the water filter indication to its default state.
Exemplifications of Various Models
Please keep in mind that the models shown in the images below are merely a few examples of the many different designs available.
Take a look at the digital display panel on your refrigerator and look for traits that are similar to these.
What you need to know about how to reset the filter light on a Samsung refrigerator (steps to follow on different models)
Holding down the FILTER RESETbutton for about two seconds is required while operating a Samsung refrigerator to turn off the red filter symbol located on the door of the refrigerator. Consult your refrigerator’s owner’s handbook if you are unable to locate the FILTER RESET button, which is usually placed on the dispenser controls (on the front of your refrigerator). Other versions can only be operated by pressing and holding down either the “WATER FILTER” button or the “ICE/WATER” button for three seconds at a time.
Samsung refrigerator model RF28K9070SR has a filter reset.
If you have an RF28K9070SR model, you may reset the filter by pressing and holding the ICE-MAKER button for roughly 3 seconds after turning it off. As a result of performing this step, the filter indicator will be reset.
Resetting the filter light on a Samsung model RF23J9011SG/AA – instructions
It is necessary to hold down the CRUSHED/HOLD button on your RF23J9011SG/AA for three seconds in order to reset the water filter light on your device. Instead of remaining on, the color of its indicator should go from red to OFF instead of remaining on. The following are the steps to follow in order to reset the water filter on a Samsung refrigerator with a French door style. There are Samsung refrigerators available, such as the Samsung refrigerator RF260/BEAESR/AA. Samsung refrigerators are also available.
You should bear in mind that, in order to activate the internal controls on devices with internal controls, you must simultaneously press and hold the buttons FRIDGE+POWER COOL for a total of three seconds.
Model DA29-00003G of the Samsung refrigerator has a filter reset light.
This button must be pressed and held down for three seconds on your RF23J9011SG/AA in order to reset the water filter light. Rather than remaining illuminated, the color of its indication should go from red to OFF. The following are the steps to follow in order to reset the water filter on a Samsung refrigerator with a French door. Available models include the Samsung refrigerator RF260/BEAESR/AA and the Samsung refrigerator RF260/BEAESR/AA. To turn off the red warning light that has shown after installing a new water filter, press and hold down the ALARM/HOLD option for three seconds.
Model number RF24R7201SR/AA of the Samsung refrigerator.
It is recommended that you push and hold the FILTER RESET button (for 3 seconds) if you have just replaced the filter in your Samsung RF24R7201SR/AA refrigerator to turn off the reset signal on the refrigerator.
Samsung refrigerator water filter reset RF28K9070SR/AA
In order to clear the water filter message, the CRUSHED ICE button must be pushed and held down for three seconds.
RF23J9011SR is the Samsung refrigerator filter reset code.
The water filter alarm on a Samsung refrigerator with model number RF23J9011SR may be reset by pressing and holding the button “CRUSHED/HOLD” for three seconds.
RF263BEAESR is the Samsung refrigerator filter reset code.
If your RF263BEAESRSSamsung refrigerator water filter does not reset automatically, the following process should be followed: Press and hold the ICE TYPE/WATER button on the controller for three seconds to activate it.
Instructions for resetting the Samsung RF28R7351SG water filter (applies for most 4 doors Samsung refrigerators)
In order to reset the warning signal, the CRUSHED LIGHT INDICATOR button must be pushed and held down for three seconds.
If the reset light signal does not turn off, there are some other options to attempt.
Briefly said, if replacing the filter does not result in the red light going off, you can also try the following steps:
- Check to determine whether any of the buttons are currently locked
- Please double-check that the buttons are actually “unlocked,” or else the Samsung refrigerator filter reset process will not work properly.
Alternatively, you may refer to your guide book once again for the procedures on how to unlock the controls if you desire them. It is conceivable that the filter alert light is still flashing because the freshly fitted filter was not put in the right location. Open the door, take a look at the fitting, and check sure everything is in its proper place.
- Double-check to make sure the correct filter was installed. As a final option, if you did not use an authorized product, the light notification might not go and you might have to switch out the new filter in order for the system to function properly again.
OUR FINAL THOUGHTS
You should now be able to comprehend how to reset the filter light on a Samsung refrigerator, which we hope has been helpful (and probably you have already gotten rid of the warning). Just one more issue to mention: the majority of Samsung refrigerator models are equipped with a “LOCK” button, which is used to lock the settings, and it is commonly this button that is faulty when the Samsung fridge water filter light does not dim when you attempt to switch it off. For the water filter light to be correctly reset, it will be required for you to unlock the controls; thus, try holding down the flashing LOCK button for 3 seconds and then retrying the procedure.
If the steps indicated above do not work, consult your guidebook to determine the proper way.
FREQUENTLY ASK QUESTIONS
Pressing and holding down either of the buttons on the side of the refrigerator for three seconds each is the most common method of resetting the Samsung refrigerator water filter. The FILTER RESET button may be found on the right-hand side of the screen, at the bottom. It is possible to use either the “WATER FILTER” button or the “ICE/WATER” button. If, on the other hand, your Samsung refrigerator filter light does not reset, then check to see if the buttons have been locked and then unlock them before attempting to reset the light again.
What is the procedure for turning off the filter light on my Samsung?
Identifying the multi-function button or buttons on your display that control the water filter indicator is important in order to restore the water filter indication to its default state. Once you have done this, press and hold the button(s) for a few seconds until the light turns green.
What is causing my Samsung refrigerator’s filter light to not reset?
If the light does not turn off after many efforts, call a professional to have the filtration system repaired or serviced. It should be possible to restore the indicator light to its previous blue color and functionality after the filter has been changed. Unless you manually reset the red filter indication on your Samsung refrigerator, it will remain illuminated at all times.
Hello, my name is Khelly. Count on me to be your go-to tech specialist for all of your Samsung Products and Information need. Finding a solution to your digital difficulties shouldn’t be as difficult as it is in everyday life. Allow me to assist you with that!?
Samsung Fridge Filters: Easy-Guide to Replacing, Resetting and Changing.
If the light does not turn off after many efforts, call a professional to have the filtration system repaired or replaced. Once you have replaced the filter with a new one, the indicator light should revert to its natural blue color and begin to work normally again. This means that until you reset the red filter indication on your Samsung refrigerator, it will remain on. Khelly here to introduce myself. I am your go-to tech specialist for any and all of your Samsung Products and Information requirements.
How about you let me aid in your endeavors?!?!
1. How to replace RSG5UCRS Samsung Fridge Filter:
If the light does not reset after many tries, call a professional to have the filtering system serviced. It should be possible to restore the indicator light to its original blue color and function once you have changed the filter. Unless you manually reset the red filter indication on your Samsung refrigerator, it will remain illuminated. Hello there, my name is Khelly. In terms of Samsung Products and Information, I am your go-to tech specialist. Finding a solution to your IT difficulties shouldn’t be complex, because life is complicated enough as it is.
- The old water filter may be removed by turning it 45 degrees to the left to open it
- At this point, gently remove the old water filter and toss it away
- The water will stop off automatically at this time. Insert the new water filter into the available area and rotate it 45 degrees to the right
- If the padlock symbol on the filter corresponds to the sign on the filter, the filter is in the proper position. Immediately following the installation of the new filter, push the water filter reset button for three seconds to reset the light indicator.
Twist it 45 degrees to the left to open it, and then remove the old water filter. Gently remove the old water filter and throw it away; the water will cut off on its own at this point, so be careful. The replacement water filter should be pushed into the available area and turned 45 degrees to the right; A lock sign that corresponds to a symbol on a filter indicates that a lock has been placed in the proper location. Immediately following the installation of the replacement filter, push the water filter reset button for three seconds to reset the light indicator;
- Immediately turn off the water supply
- Remove the old cartridge from the system and dispose of it properly
- The water filter should be positioned such that it flows in the direction of the refrigerator
- The inlet and exit tubing should be connected to the proper end of the filter by firmly inserting the tube all the way into the filter until it is snugly shut
- Check to see that the tube is square and free of scratches – you may trim it if required. The filter clip should be installed according to the directions in the installation manual. Make sure there are no leaks in the filter by turning on the water. Re-do the installation processes and check again whether there are any leaks. If the leaks continue, remove the filter and contact customer service. Allow water to circulate through the filter for five minutes in order to clean the entire system.
2.How to Replace a DA29-00003F Water Filter
Put a stop to the water flow; Then, disconnect the old cartridge from the system and throw it away. The water filter should be oriented such that it flows in the direction of the refrigerator; The inlet and outlet tubing should be connected to the proper end of the filter by firmly pressing the tubing all the way to the other end until it is tightly sealed. Check the tubing to make sure it is square and free of scratches – you may cut it if required. When it comes to installing the filter clip, refer to the installation manual.
Re-do the installation stages and verify again whether there are any leaks; Removing the filter and contacting assistance is recommended if leaks continue; Allow water to circulate through the filter for five minutes in order to clean the entire system;
- The old water filter may be removed by turning it 45 degrees to the left to open it
- Gently take it out and throw it away — this will cause the water to cut off automatically
- To install the replacement water filter, insert it and rotate it 45 degrees to the right to secure it in place
- If the padlock sign on the water filter corresponds to the symbol on the water filter, you have completed the task successfully. To reset the water filter indication, press and hold the water filter reset button for three seconds.
Suggestions for improvement In the event that you are having difficulty removing the water filter, it is possible that there is excessive water pressure behind the filter. Remove the top two refrigerator shelves and use a stronger pull on the filter to get it out.
If you are unable to squeeze the new filter into the available area, turn off the water supply valve and dispense a little amount of water. As a result, the pressure will be reduced, making it easier to install the new filter.
3. How to Reset the Water Filter Indicator Light on a Samsung Fridge
In addition to the water filter, every Samsung refrigerator that has one features a water filter indicator that tells you when it’s time to replace the water cartridge. The filter should be replaced once every six months regardless of whether or not the light changes color. This will ensure that you continue to drink the high-quality water that you have come to like. If you don’t change your water filter on a regular basis, it won’t function properly. Instead of drinking great-tasting, clean water, you’ll be forced to drink strange-tasting water that may include unwelcome toxins.
- Blue indicates that your water filter is performing properly.
- Red:Your water filter has reached the end of its useful life and it is time to replace it with a new one.
- By pushing and holding the “Alarm / Hold for 3 seconds to Reset Filter” button for three seconds, you may reset the indicator light.
- This will return the indicator light to its original blue state.
4. How to Replace a DA29-00003G Samsung Fridge Filter
Instructions for internal filters are provided in the next section. The Samsung DA29-00003G water filter is always installed from inside the device itself.
- To remove the old water filter, twist it a quarter turn to the left to free it
- Then lift it out. Gently remove the old water filter and throw it away
- This will cause the water to be switched off automatically. Insert the new water filter and rotate it by a quarter turn to the right until it is secure. If the padlock sign on the water filter corresponds to the symbol on the water filter, you have successfully installed it. The water filter indication should be reset after installation by pressing the water filter reset button for three seconds after completion.
Twist the old water filter a quarter turn to the left to free it, and then pull it out; Removing and discarding the old water filter will cause the water to be switched off automatically. Insert the new water filter and rotate it by a quarter turn to the right to activate it. Ensure that the padlock sign on the water filter corresponds to the symbol on the water filter; otherwise, you have not successfully installed it. The water filter indication should be reset after installation by pressing the water filter reset button three times in quick succession.
5. Why You Need to Change Your Fridge Filter Every 6 Months
You might believe that you only need to change your refrigerator filter when the indicator light indicates that you should – but this is not the case. In some cases, waiting until the light goes red might be harmful to your health. A water filter prevents pollutants from flowing through the pipes and into your drinking water supply. When the water filter is no longer functional, all of the impurities that have been caught can now pass through into your drinking water, making it even worse than if you had not used a water filter at all.
Each Samsung water filter contains activated carbon filter material that has been approved for usage with a specific amount of water before the cartridge has to be replaced.
By absorbing impurities from water, activated carbon serves as a filter for such contaminants.
This occurs when there is no more surface area available for the absorption of additional pollutants and the filter’s capacity has been achieved. As a result, a large number of pollutants in the water will simply pass through the filter and into your drinking water.
How To Reset The Water Filter Indicator On a Samsung Fridge.
There are currently no goods available in this category. The Water Filter Light Can Be Reset On Page 1 of 2 The water filter indication light on your refrigerator is illuminated. Normally, the indication light has a bright blue color. The color of the indicator light changes every 6 months, or after about 400 gallons of water have passed through the dispenser. It will eventually turn purple or crimson. Remember that if the indication light on your dispenser changes but the ice maker or water pressure from the dispenser continues to function properly, you do not need to replace the filter.
It is important to note that if the light is already off or blue, there is no need to reset the indicator light.
For instructions on how to reset the water filter indication light, see the procedures below: To reset your filter, look for the button on your display panel that has the words “Hold 3 sec for filter reset” printed on it.
It is the button in the middle of the control panel on the left side of the screen.
Resetting The Water Filter Indicator
Unless the ice production and/or water pressure are abnormal, and the indicator is illuminated, it is not necessary to replace the filter. Just bear in mind that when ice production and water pressure begin to deteriorate, it is necessary to replace the water filter. Perform the following steps to reset the water filter indication light: 1. Find the Alarm button on the control panel and press it. It is the button in the middle of the control panel on the left side of the screen. 2. Press and hold the button for a few seconds until the indication light turns off (approximately 5 seconds).
Will the Water Dispenser on the French Door Refrigerator Work Without a Water Filter Installed?
No need to replace the filter when ice production and/or water pressure are normal yet the light remains on. Maintaining the proper filter replacement schedule is important when the ice production and water pressure begin to decline. If you want to reset the water filter indication light, follow these steps. 1. On the control panel, look for the Alarm button. It is located in the middle of the control panel on the left side. To turn off the indicator light, press and hold the button for several seconds (approximately 5 seconds).
How to reset the filter light on a Samsung refrigerator (steps to follow on different models)
When using a Samsung refrigerator, you must hold down the FILTER RESET button for about two seconds in order to turn off the red filter icon on the door. If you are unable to locate the FILTER RESET button on your refrigerator – which is often located on the dispenser controls – consult your owner’s handbook for assistance (on the front of your refrigerator). Other models, on the other hand, require you to press and hold down either the “WATER FILTER” button or the “ICE/WATER” button – for a total of three seconds.
Now, because the Samsung refrigerator water filter reset technique is not the same for every model, we’ve outlined the right Samsung refrigerator water filter reset procedure for each model in the following sections (typical steps).
Samsung fridge water filter reset – step by step instructions for specific Samsung fridge models
To reset the filter on your RF28K9070SR model, press and hold the ICE-MAKER button for about 3 seconds after turning it off. The filter indication will be reset as a result of this action.
Samsung model RF23J9011SG/AA filter light reset – directions
The CRUSHED/HOLD button on your RF23J9011SG/AA must be held down for three seconds in order to reset the water filter light. The color of its indicator should transition from red to OFF instead of staying on.
Samsung fridge water filter reset – steps for French door style Samsung refrigerators including Samsung refrigerator RF260/BEAESR/AA
After installing a new water filter, press and hold down the ALARM/HOLD option for three seconds to turn off the red warning light that has shown. Please keep in mind that, for devices with internal controls, you must push and hold down the buttons FRIDGE+POWER COOL (at the same time) for a total of three seconds.
Samsung refrigerator filter reset light -DA29-00003G model
To reset a replacement warning light, press and hold the ALARM/HOLD button for three seconds while the light is off.
Samsung refrigerator model RF24R7201SR/AA
If you have recently replaced the filter in your Samsung RF24R7201SR/AA refrigerator, pushing and holding the FILTER RESET button (for 3 seconds) should turn off the reset signal on the refrigerator.
Samsung refrigerator filter reset RF28K9070SR/ Samsung refrigerator water filter reset RF28K9070SR/AA
The CRUSHED ICE button must be pressed and held down for three seconds in order to clear the water filter message.
Samsung refrigerator filter reset RF23J9011SR
Using the Samsung refrigerator RF23J9011SR model, press and hold the button “CRUSHED/HOLD” for three seconds to reset the water filter alarm on your Samsung refrigerator.
Samsung refrigerator filter reset RF263BEAESR
The following procedure should be followed if your RF263BEAESR Samsung refrigerator water filter does not reset automatically: For three seconds, press and hold the ICE TYPE/WATER button on the controller.
Samsung RF28R7351SG water filter reset directions (applies for most 4 door Samsung refrigerators)
The CRUSHED LIGHT INDICATOR button must be pressed and held down for three seconds in order to reset the warning signal.
Samsung SRF719DLS filter light reset
Once again, this is a model in which pressing the CRUSHED/HOLD button for three seconds will turn off the water filter indicator light.
Samsung refrigerator filter reset RF28R7201SR
The following steps will show you how to reset the filter on your Samsung refrigerator RF28R7201SR: Hold down the ICEMAKER symbol for three seconds after selecting it. The filter reminder light will be turned off as a result of this action.
Samsung RF22K9381SR filter reset
For three seconds, press and hold the FILTER RESET button on your device.
What to do if the filter warning light is still red (even after the installation of a new water filter and trying the outlined procedure)
The following is a list of other things you may do if your Samsung refrigerator filter light does not reset after you follow the procedures above (soon after you have installed a new filter).
Other steps worth trying if reset light indicator won’t go out
The following is a list of other things you may do if your Samsung refrigerator filter light does not reset after you follow the procedures above (soon after you have installed a new filter).
· Check if the buttons are locked
Make certain that the buttons are truly “unlocked,” or else the Samsung refrigerator filter reset operation will not function properly. For the methods on how to unlock the controls, you can refer to your handbook book once again if you require them.
· Check the filter seating
It is possible that the filter alert light is still blinking because the freshly fitted filter was not properly placed. Open the door, look at the fitting, and make sure it’s exactly in place.
· Check if the correct filter was installed
If you did not use a legitimate product, the light indication may not go away, and you may need to switch out the new filter to get it to work again (as a last resort).
How to reset the filter light on a Samsung refrigerator– Frequently asked questions (FAQs)
The majority of the time, the technique to do a Samsung refrigerator water filter reset consists of pushing and holding down either of these buttons for three seconds each.
- The FILTER RESET button
- The “WATER FILTER” button or the “ICE/WATER” button
- And the “WATER FILTER” button.
However, if the filter light on your Samsung refrigerator does not reset, then check to see if the buttons have been locked and then unlock them before retrying.
Final words
We hope you have gained a better understanding of how to reset the filter light on a Samsung refrigerator (and probably you have already gotten rid of the warning). Final point: Most Samsung refrigerator models are equipped with a “LOCK” button, which is used to lock the controls, and it is frequently this button that is to fault when the water filter light on your Samsung refrigerator does not turn off when you try to turn it off. It will be necessary for you to unlock the controls in order for the water filter light to be correctly reset; thus, attempt to hold down the flashing LOCK button for 3 seconds and then restart the process.
AS WELL, READ: Samsung Twin Cooling Refrigerator Refrigerator Freezer Not Working.
The Red Filter Indicator on My Samsung Refrigerator Won’t Turn Off
If the light does not reset after many attempts, contact a professional to service the filtration system. The most likely cause of the problem is a short between the cables connecting the filter and the console. If you have a Samsung refrigerator, a filter indicator light will illuminate to alert you when it’s time to replace the water filter. The light begins in a blue hue, indicating that a new filter has been installed. When the filter has been in place for five months, the light turns purple.
Once you have replaced the filter with a new one, the indicator light should return to its original blue color and function properly.
Step 1
Ensure that the filter is properly placed by opening the refrigerator door and looking inside. This means that the filter should be completely contained within the housing located in the bottom right corner of the refrigerator. To remove the old filter, turn it 90 degrees counterclockwise and pull it out. Install the new one by rotating it 90 degrees clockwise once it has been removed. It does not matter if the filter is fully seated or not; the indicator will not identify a newly installed filter.
Step 2
If the red warning light on the control panel is still lighted, look for the “Child Lock” and “Ice Type” push buttons on the panel.
Step 3
Press and hold both buttons at the same time for three seconds to complete the task at hand. It is expected that the indicator light will be illuminated in a blue hue.
How To Reset The Filter Light On Your Samsung Refrigerator
The majority of Samsung refrigerators are equipped with filter light indications, which alert the user when the water filter needs to be changed. It also implies that after replacing the filter in the Samsung refrigerator, you will need to reset the filter light in the appliance. But why is this the case? Generally speaking, the maximum number of months that a water filter may be used is six. However, depending on the type of water that passes through the waterline, it may be necessary to replace the waterline.
Consider that if the water is hard in your area, you may need to replace the filter within 3 to 4 months of installing it. You will not be able to determine that your filter needs to be replaced until you notice a difference in flavor, which you would not notice without the filter light.
How Samsung Water Filter Indicator Works
When the Samsung water filter is still in excellent working order, it will display a blue or green hue, depending on the model you have. When it has been in the water for 5 months or 450 gallons, the color turns to orange or light pink. This color shift is frequently an indicator that it is time to replace the water filtration system. Your water filter indicator will turn red after 6 months or 500 gallons of water have been used. When you notice this red light, it’s time to replace the water filter.
However, you will need to replace your water filter sooner than 6 months if you live in a region where there is an excessive amount of limescale in the water.
Click here to view and purchase the filter.
How to Reset the Filter Light on Your Samsung Refrigerator
When the Samsung water filter is still in excellent working order, it will display a blue or green hue depending on the model you have. When it has been in the water for 5 months or 450 gallons, it becomes orange or light pink. This color shift is frequently an indicator that the water filter needs to be replaced. Your water filter indicator will turn red after 6 months or 500 gallons of usage. The water filter should be changed as soon as you notice this red light. Waiting any longer may result in the appearance of particles in your drinking water.
Amazon has the 2-Pack Samsung DA29-00020B Refrigerator Water Filter available for purchase.
Video: How To Reset Filter Light On Samsung Refrigerator
Take a look at these other in-depth articles and reviews. How Much Propane Does a Recreational Vehicle Refrigerator Consume? Detailed Review of the ARB 12V Weatherproof Fridge/Freezer with Electronic Lock Review of the Kalamera 18-Bottle Wine Cooler in Detailed What to Do When Transporting a Refrigerator When it comes to the price of a Sub-Zero refrigerator, it is hard to beat the competition. A Comprehensive Review of the Whynter 34-Bottle Wine Cooler
Get Instant Help — Ask An Experienced Verified Appliance Technician
Do you require professional assistance? If you need to speak with a verified appliance technician right now, click here to use the chat box on this page. There is no need for costly in-home service visits. There are no appointments. There is no waiting.
Samsung refrigerator filter reset step by step ( rf28r7351sr, rf23j9011sr, rf28k9070sr, rf28r7201sr, rf22k9381sr, rf28k9380sr/aa, rf28r7351sg )
Make sure you have the correct filter for your Samsung refrigerator. Discover where on the fridge a filter has been fitted and mark it. Replace the old filter with a new one after removing the old one. Fill reservoirs with one gallon of water each and purify the water via a filter to remove any contaminants. Finally, the indication for changing the water filter should be reset. How to Reset the Samsung Refrigerator Filter in Step by Step Instructions Please follow the steps in this instruction to methodically reset the refrigerator filter and to begin using the filter in normal circumstances.
- In most cases, the indication or notification system is mounted on the refrigerator’s front door or on the side of the refrigerator.
- Step 1: Locate the previous filter.
- Find the location and carefully study the instructions on the handle that are written on the door.
- Step 2: Replace the existing filter.
- Check to see that you have purchased the correct model of filter for your refrigerator.
- Step 3: Reset the button’s settings.
- Locate the button that says “Reset filter option.” Please push and hold the button for a few seconds after pressing it carefully.
Please continue to hold the button down until the notification light goes out and your filter indicates that the reset has been completed.
Fill the reservoir with one gallon of water and turn on the machine to let the water to filter itself.
The infection would have been contained in the first few drinks.
As a result, refrain from consuming it and instead wait for the water to become clean.
The water filter will last approximately six months after it has been replaced.
Do not avoid alarm noises at any costs.
Once the blockage has grown to a significant size, the water filter will no longer be able to flow the water through it.
In addition, it alters the flavor of water and causes water to smell foul after a while.
Do not avoid alarm noises at any costs.
If you just press the button again without changing the filter, there is a chance that the filter will begin to send polluted water through it again.
It will have a negative influence on the wellness of your body.
If necessary, consult the instructions. Reset options are available on all Samsung refrigerators through a single button press. Some may require you to complete extra steps before you may reset the button. Most of the time, though, everything is the same and functions completely great.
How to process Samsung refrigerator filter reset rf28r7351sr?
The Samsung refrigerator filter has an automated mechanism that allows consumers to reset the system with a single touch of a button on the side of the refrigerator. The reset button may be found on the refrigerator’s front panel, with the other settings, near the ice maker. It signifies that the filter has been reset, and you will be able to begin using the filter once more after clicking on it. The notice will be turned off if you locate and hold down the reset button for three consecutive seconds.
How to proceed to Samsung refrigerator filter reset rf23j9011sr?
With the Samsung refrigerator filter, customers can easily reset the system with a single push button, thanks to an automated feature that is included. Locate the reset button, which is among the other settings on the front screen of the refrigerator. It signifies that the filter has been reset, and you will be able to begin using the filter once more after clicking on this button. The notification will be turned off if you locate and hold down the reset button for 3 seconds. After the notification has been restored to normal, the reset operation is complete.
How to conduct a Samsung refrigerator filter reset rf28k9070sr?
When the filter begins to display a message on a screen suggesting that a reset is required, it is important to replace the filter completely in order to maintain your refrigerator operating properly. For the best results, please push and hold the button located on the front screen of the refrigerator for a few seconds, as stated on the display. Soon, your refrigerator’s filter will be reset, and you will be able to begin drinking the filtered water it has produced.
How to perform Samsung refrigerator filter reset rf28r7201sr?
To begin, obtain a replacement filter depending on the model number. Locate the spot where the filter is installed, gently turn the lock mechanism to unlock the filter, and then remove the filter from the system. Now, replace the old filter with the new filter and re-set the indication to the previous setting. You have completed the filter reset process.
What is needed for Samsung refrigerator filter reset rf22k9381sr?
It is simple to replace the filter with a few simple steps. Navigate to the filter settings and delete the previous filter before replacing it with the newly created one. The new filter will be ready to be reset after it has been installed. Locate the display in front of the refrigerator at this point. On the screen, you’ll see a button that says “auto-reset option.” Find the button and hold it down for a few seconds. It will be reset, and you will be able to use the filter to drink pure water once more after that.
Ways to Samsung refrigerator filter reset rf28k9380sr/aa?
You will be prompted to reset the Samsung refrigerator after about six months. To determine the state of the filter, look at the water indicator. If you receive a message that the filter has to be reset, download the new filter and replace it with an existing one. Locate the reset button and push and hold it for a few seconds—for a short period of time after you have secured the new filter in place. The filter will be ready to use at this point.
Why do you need to perform a Samsung refrigerator filter reset rf28r7351sg?
It would be preferable if you had a filter model that was appropriate for the situation.
Remove the old filter from the refrigerator and replace it with the new one. The technique for resetting is straightforward. After you have finished replacing the filter, go to the settings menu and select the reset option. The filter will then be ready to be used.
How do you reset a Samsung filter indicator?
Locate the multi-functional button on the refrigerator’s control panel. Keep pressing the button for a few seconds until the red light goes off. After that, the filter will be reset, and you will be able to begin using the Samsung filter water immediately after that.
What to do when you see a Samsung refrigerator filter reset the light?
The notice serves as a signal that the Samsung filter has been reset. When you see the light, it is time to turn off the filter and turn it back on. After changing the filter, press and hold the refrigerator filter reset button for 3 seconds after replacing the filter. Once this is done, the water filter can once again be used. Resetting the filter is simple.
How many times can you reset the refrigerator filter?
The majority of refrigerator filters are designed to last for six months or more. Some filters, on the other hand, may lose their effectiveness prematurely if they are subjected to an excessive amount of hard water passing through them. As a result, the filter would need to be replaced sooner rather than later. Choose a replacement water based on the taste and smell of the water. In most cases, an indicator will also display a notification that the filter needs to be replaced. In order to avoid unpleasant water taste, follow the instructions and get your filter replaced and reset as soon as possible.
How do you reset a refrigerator after changing the water filter?
Modern refrigerator water filters are fitted with a simple reset mechanism that is simple to use. Press the notification button that reads “Reset the water filter” after you have replaced the water filter with a new one once you have done so. The water filter will be reset in three seconds, and you will be able to use the filter once more after that time.
What to do when you cannot reset the refrigerator water filter indicator light?
It becomes a problem if the refrigerator’s water filter indication is not working properly. If the indication is still flashing, press and hold the filter reset button for 3 seconds, then release it after the notice has stopped blinking. It is possible that the surgery will not be successful in some instances. Test whether the system is unlocked using the ice maker reset procedure. Press and hold the ice maker’s reset button for a few seconds, then release it when the notice indicates that it has been reset.
If the problem consists, it suggests that the reset mechanism of a filter has failed and has to be replaced.
In such case, contact the support center and request that a specialist reset the Samsung filter.
How to reset the water filter and filter light on a Samsung refrigerator
This will demonstrate how to reset Samsung’s cooling water filter light and how to do so if the light does not go away even after you have completed the procedure of changing your Samsung cooling water filter as described in the previous section. It is important to note that when the filter is changed, the filter reset signal just becomes red instead of turning green (otherwise, it will not be illuminated).
Samsung Refrigerator How to reset the filter light (steps to follow on different models)
With the majority of Samsung coolers. It is necessary to hold down the FILTER RESET button for roughly one second in order to turn off a red filter indicator. If it is not feasible to follow the FILTER RESET instructions on your refrigerator, see your owner’s manual. It is always focused on supply chain management (on the front of your refrigerator). Other models, on the other hand, require you to press the “WATER FILTER” or “ICE/WATER” buttons and holding them down for 3 seconds, accordingly.
Now since the refrigeration process for Samsung water filters is not the same for every model, it is important to note that In the following table, the correct Samsung refrigerating filter reset light phases for the various models are indicated in red (typical steps).
Samsung Refrigerator Water Filter Reset – step by step guidelines for Samsung Refrigerator models
To reset the filter on your RF28K9070SR model, press and hold the ICE-MAKER button for about 3 seconds while holding the button down. As a result of performing this step, the filter indication is reset.
Filter light reset on Samsung model RF23J9011SG/AA – instructions
Touch and hold the CRUSHED/HOLD button on your RF23J9011SG/AA for three seconds to turn off the water filter light. The color of the indicator should go from red to off.
How to Reset the Water Filter in a Samsung Refrigerator – French Door Style
Samsung refrigerators, such as the RF260/BEAESR/AA Samsung refrigerator, are designed to be energy efficient. In order to turn off the red warning light after replacing a water filter, press and hold the ALARM/HOLD option for 3 seconds after it has been installed. Then push and hold down the FRIDGE+POWER COOL (simultaneously) buttons for another 3 seconds if your unit has interior controls.
Model DA29-00003G Samsung refrigerator filter reset light
In order to reset the replacement warning light, press and hold the ALARM/HOLD button for three seconds.
RF24R7201SR/AA is a Samsung refrigerator model
In order to turn off the reset indicator on your RF24R7201SR/AA Samsung refrigerator after replacing the filter, press and hold the FILTER RESET button (for 3 seconds) for 3 seconds.
RF28K9095SR/AA reset filter for the Samsung cooling system | Samsung cooling system
The water filter notice will be cleared if you press and hold the CRUSHED ICE button for three seconds.
Reset Samsung Filter Refrigerator RF23J9011SR
If you have a Samsung refrigerator with model number RF23J9011SR, press and hold the “CRUSHED/HOLD” button for three seconds to reset the refrigerator’s refrigerative water filter alarm.
Filter reset RF263BEAESR Samsung refrigerator
The following procedure should be followed if your Samsung water filter is not automatically reset by your RF263BEAESR refrigerator: Press and hold the ICE TYPE/WATER button for three seconds.
Water filter reset addresses Samsung RF28R7351SG (applies for most 4 door Samsung refrigerators)
The INDICATOR button CRUSHED LIGHT must be held down for three seconds in order to reset the warning notice.
Reset the light filter Samsung SRF719DLS
This is yet another model in which the water filter light is not activated when the CRUSHED/HOLD button is held down for three seconds.
RF28R7201SR reset Samsung refrigerator filter
The following is the procedure for resetting the Samsung Refrigerator Filter RF28R7201SR: Navigate to the symbol ICEMAKER and hold it for three seconds. This makes room for the filter by clearing the light.
Reset filter from Samsung RF22K9381SR
Hold the FILTER RESET button down for three seconds after pressing it.
What if the warning light filter is still red. (even after a new filter has been installed and the described procedure has been attempted)
For three seconds, press and hold the FILTER RESET button.
How to reset the filter light on a Samsung fridge – Questions often asked (FAQs)
What does my Samsung refrigerator do in order to turn off the filter light, exactly? Pushing and holding down one of the buttons for three seconds is the most common method of doing a Samsung refrigerator water filter reset.
- THE BUTTON FILTER RESET
- THE BUTTON ‘WATER FILTER’
- THE BUTTON “ICE/WATER”
- THE BUTTON “FILTER RESET”
However, before retrying, make sure that the light filters in your Samsung refrigerator have not been reset and that the buttons have not been locked.
Last Words
If you have a Samsung coolerEye Candy Apps, we’d want to see you reset the filter light on it now. It’s likely that you have already removed the warning from your computer. Last but not least, the majority of Samsung cooler models are equipped with a “LOCK” button that is used to lock the check and is frequently to blame when the light from the Cooler does not switch from Samsungoff after many attempts. In order to effectively reset the water filter light, it is critical that you unlock the controls and hold down the LOCK flashing button for three seconds before attempting the reset a second time, as described above.
Many models have excessively distinct unlock techniques, thus please check that your handbook does not operate correctly for the right guidelines before proceeding.