How To Replace Samsung Water Filter

Replace the water filter in your Samsung refrigerator

There are three different types of Samsung water filters, so you’ll want to be sure you’re getting the right one for your refrigerator before purchasing one. Replacement filters are available for purchase on ouraccessories page if needed. To begin, identify the filter in your refrigerator’s model. You should refer to your user handbook if you are unclear about the location. Then, on the filter itself, look for the model number printed on it. This will inform you of which of the following filter types you will require for your application.

If you’re not sure whether or not you need to replace the filter, look for an indication light on your refrigerator.

If you are about to replace the filter, the light will become purple to indicate that it is time.

You should alter the filter as soon as possible at this point.

  1. After turning off the water, identify the filter and clean it as needed. If you are unclear of where it is, please refer to your user handbook for assistance. Once you have unlocked the old water filter, remove its lid and swivel it counterclockwise to reinstall it. Afterwards, just pull it straight out of the filter housing to remove it. Prior to placing the new filter in the system, remove the protective cover from the top of the existing filter. Afterwards, insert it directly into the filter housing and turn it counter-clockwise
  2. Examine to ensure that the lock symbol corresponds to the indication line.

Types of HAFCU1 filters include:

  1. After turning off the water, identify the filter and clean it as needed. If you are unclear of where it is, please refer to your user handbook for assistance. Using a left-handed twist, you can remove the old filter. This will allow you to access it
  2. Afterwards, pull it downward to remove it from the filter housing. The replacement filter should be inserted by pushing it up into the filter housing and then turning it to the right. Check to ensure that the notch at the top of the filter corresponds to the arrow on the filter’s housing. Replace your filter and then flush it thoroughly with a few liters of water to wash out any contaminants or air that may have gotten into it. Then, make sure that the water filter light on your refrigerator is turned back on. Please refer to the following sections for further information.

After turning off the water, locate the filter and clean it as necessary. You should reference your user manual if you are unclear of where it is located. Using a left-hand twist, you may remove the old filter. Upon doing so, it will be unlocked. Afterwards, pull it down to release it from the filter housing. Using your fingers, press the new filter upwards and then to the right; this will ensure that it is properly installed. To avoid clogging the filter, make sure it has a notch at the top that matches the arrow on the housing.

Then, make sure that the water filter light on your refrigerator is turned off and back on again.

  1. If theFilter Resetbutton is accessible on the control panel, locate it and press it. In some cases, it is a secondary function of another button on the panel
  2. Once identified, press and hold the proper button for 3 seconds until the light turns out
  3. The filter symbol will either turn off or return to its usual color when the light is turned off. This restarts the timer for the next six months.

Please keep in mind that some models may require you to press two buttons at the same time in order to reset the light. Touch screen models will instead make use of on-screen menus. Consult your refrigerator’s owner’s handbook for detailed operating instructions. The water filter light and timer on your Family Hub refrigerator may be reset by following the instructions outlined below.

  1. Start by selecting Apps from the Home screen, followed by Fridge Manager
  2. Then choose Water Filter from the Home screen, followed by Reset and then Proceed. The filter light and timer will be reset as a result of this. If you require a Samsung water filter, you may purchase one by pressing the Buy Filter button after tapping the water filter symbol.

On models RF4289 and RSG309, you may also reset the filter light by pressing the reset button.

  1. Then, at the bottom of the screen, navigate to and pick theSettingsicon, and then tapWater Filter to begin. As soon as the Water Filter menu appears, press Next three times in the lower right corner of the screen until you reach page 4/4 of the Water Filter menu. Hold the object with your fingertips. Remove and reinstall the water filter until it changes its status, which may be done in the middle of the display. After the message “Filter Replaced” appears and disappears from the screen, tapSave in the lower right corner of the screen.

In order to define what is filtered by a water filter, the National Sanitation Foundation (NSF) and the American National Standards Institute (ANSI) have developed a variety of standards. Samsung’s water filters are Carbon Filters that meet the requirements of the NSF/ANSI 42, NSF/ANSI 53, and NSF/ANSI 401 standards, among other requirements. NSF/ANSI 42 is a standard for food safety and sanitation.

  • Filtered to decrease the presence of aesthetically objectionable contaminants like as chlorine and taste/odor

NSF/ANSI 53 is a standard that specifies how a product should be designed, manufactured, and tested.

  • Certified to decrease a pollutant that has a negative impact on health. The following substances have been identified as having negative health effects by the United States Environmental Protection Agency (EPA) and Health Canada: Asbestos, Atrazine, Benzene, 2, 4-D, Carbofuran, Chlorbenzene, Cyst (99.99 percent), Endrin, Ethylbenzene, Lead, Lindane, Mercury, O-Dichlorobenzene, P-Dichlorobenzene, Tetrachloroethylene, Toxaphene

NSF/ANSI 401 is a standard for food safety and sanitation.

  • It has been proven to lower one or more of the 15 emerging pollutants in drinking water by at least 50%. Pharmaceuticals and chemicals that are not yet controlled by the Environmental Protection Agency or Health Canada include: atenolol, bisphenol A, carbamazepine, DEET, estrone, linduron, nonylphenol, phenytoin, trimethoprim, and trimethoprim sodium.

Check out our troubleshooting guide for assistance if you are having difficulties installing the water filter in your refrigerator.

How to replace the water purifier filter for my refrigerator?

The most recent update was made on September 22, 2020. Samsung refrigerators are fitted with filters that cleanse and deodorize the water they hold. When the maximum usage limit for each filter is reached, a red light will illuminate, signaling that the filters must be replaced. For information on how to change the water purifier filter, see the instructions below. It is also a good idea to consult the owner’s handbook of your refrigerator for further information.

When the water filter indicator is lit on the display panel

When the water filter indicator light reaches five months or 450 gallons, it is programmed to become orange, and when it reaches six months or 500 gallons, it is set to turn red. To reset the water filter indication, remove the filter and then reset the function on the control panel. Replace the filter and try again. The color of the light might vary depending on the type. Green or blue lights are common. Note:

  • Based on the model that you own, the actual design of the display panel may change. Despite the fact that this image is a reference in English, it is also accessible in the language of your choice.

How to replace the water purifier filter

It is suggested that you change the filter as soon as the filter replacement notice shows on the display panel in order to ensure that you always obtain clean and sanitary water or ice. It is advised that you utilize the water after you have poured out more than 500ml after changing the filter. When replacing the water filter, you must first turn off the water supply valve to prevent water from leaking. Once the replacement is complete, be certain that the water supply valve is switched back on.

Step 2: Remove the filter cover and rotate the water filter counterclockwise to clear the sediment.

Place the new filter into the filter case and tighten it with your fingers by turning it clockwise until it locks.

  • The filter should be replaced promptly when the filter replacement notice shows on the display panel in order to ensure that you always obtain clean and hygienic water or ice. It is advised that you utilize the water after changing the filter if you have poured out more than 500ml of it before doing so. Whenever you replace a water filter, be sure that you turn off the water supply valve first. Check that the water supply valve is operational again once you have completed the change. Step 1. To reset the filter, press and hold the Ice Type/Filter Change button on the control panel for three seconds. To begin, open and rotate the water filter counterclockwise by turning the filter cover. Step 2. The water filter should be taken out of the container. Place the new filter into the filter case and tighten it with your fingers by turning it clockwise. Note:
See also:  What Samsung Water Filter Do I Need?

Reset the filter indicator light after replacement

Immediately following the replacement of the old filter with a new one, the filter replacement cycle must be reset by pushing and holding the alarm button for three seconds. This ensures that the product performs well and that replacement cycles are followed. When the filter indication is reset, the color of the indicator changes from red to green (or the words Replace Filter will disappear). Please keep in mind that this image is only a preview in English and that the full version is available in the language of your choice.

To determine which filter has to be replaced, look for the serial numbers that relate to each filter for your refrigerator model.

  • The serial number may be easily seen by opening the upper left door on the front or the lower left door on the side
  • Both doors are located in the top left corner. The label for your refrigerator contains the model name and serial number of your refrigerator

Customer care representatives may provide a list of available filters, and you can also purchase a filter online by entering the refrigerator’s serial number in the search box.

Thank you for your feedback!

Please respond to all of the questions.

Contact Us

Thank you for your time in answering all of the questions.

Call

Speak with a member of our knowledgeable and devoted staff.

Face to face Support

Find the Samsung Service Centers in your region that are the most convenient for you.

Refrigerator Water Filters & Replacements

Make certain that your family has access to pure, clean, and delicious water. With a genuine Samsung water filter, you can eliminate toxins in your household.

Our filters are NSF* certified to remove many contaminants.

Water that is pure, clean, and delicious is essential for your family’s health. Using a genuine Samsung water filter, you may eliminate toxins in your own house.

Why your filter choice matters

Ensure that your family has access to pure, clean, and delicious water. Remove pollutants from your drinking water at home with an authentic Samsung water filter.

Easy to install. Easy to use.

The last thing you want is to have to deal with a difficult water filter installation. Our water filters are specifically designed for Samsung refrigerators, making them simple to install. – Genuine Samsung water filters are available at a discounted price of $15 per filter for Art, Samsung customers. A 6-month auto renewal guarantees that you receive the best fit every time you purchase. You may make changes to your subscription from your account at any time.

Subscribe and save

Now is the time to subscribe to save 30% a year on water filters and to receive an automated replacement every 6 months—as well as free Samsung assistance throughout your 1-year warranty period.

Support topics

DISCOVER MORE1 Any damage caused by a non-genuine Samsung filter will not be covered by the manufacturer’s warranty. * NSF 42, 53, and 401 certified filters are available.

How to Change the Water Filter on a Samsung Refrigerator

You’ve been ignoring the Change Water Filter Indicator on your Samsung refrigerator for a little bit longer than you should have. If this is the case, don’t waste any more time! Follow these simple step-by-step directions to learn how to replace the water filter in your Samsung refrigerator. It is critical to change your Samsung water filter on a regular basis for the health of your family and your refrigerator! A clean water filter installed in your Samsung french door, four flex, or side-by-side refrigerator may make a significant impact in the quality of your drinking water and food preparation.

Step-by-Step: How to Change the Water Filter on a Samsung Refrigerator

If you don’t have technical skills, changing your water filter is a breeze thanks to a Samsung design. You can begin by following the steps outlined in this document.

Step 1: Purchase the Correct Samsung Water Filter

We strongly advise you to get the Samsung Factory Water Filter. If at all possible, stay away from knock-off brands. Although they are less expensive, the quality is not similar. The Samsung Factory Water Filter may be purchased online through Amazon, with most items shipping the same day on conventional Prime or free 2-hour delivery on Prime Now, depending on the product. We encourage that you sign up for the Amazon Subscribe and Save program in order to save money on future purchases.

To ensure that you never have an out-of-date water filter again, schedule your water filter to be delivered automatically every five months. You may also check local retailers such as Lowe’s, Home Depot, or an appliance parts store in your area for replacement components.

Step 2: Verify you have the right part!

Refrigerator water filters are model number specific, which means that you must use the exact filter for your refrigerator and not just any water filter. WARNING: Before opening the package, double-check that you have the appropriate filter. It is not possible to return the water filter once it has been installed. The water filter component number DA29-00020B (shown below) is used in the majority of Samsung french door, four flex, and side-by-side refrigerators; nevertheless, it is important to check the refrigerator model number to ensure that you are purchasing the proper filter for your product.

See the following specifications for further information: Your Samsung water filter will be sent with a new water filter, an instruction manual, and sticker reminders for the filter’s expiration date.

Step 3: Locate the Samsung Water Filter on Your Refrigerator.

The position of the water filter is determined by the setup of your Samsung refrigerator. French DoorsFour Flex models have a water filter that is situated between the produce drawers and the French DoorsFour Flex models’ fresh food area (as pictured below). Samsung side-by-side refrigerators are equipped with a water filter, which is positioned on the fresh food side of the bottom drawer on the right-hand side of the unit.

Step 4: Prepare the Filter for Installation

Simple removal of the plastic wrapping and removal of the top cap are all that is required to ready the filter for installation. A well designed filter will look something like this.

Step 5: Install the Samsung Water Filter

Installing the water filter is accomplished by turning the filter knob to the left. It takes approximately 1/4 turn to unlock the filter. If possible, you should be able to remove the filter without having to switch off the water supply. To release the filter, slowly move the refrigerator forward and switch off the main water supply. In order to install the replacement filter, screw it into place with a quarter-clockwise turn. When the filter is locked in place, you may hear a pressure noise, which is completely normal.

Step 6: Purge 1 Gallon of Water

1 gallon of water should be sent through the filter. For the first 3-5 seconds, you may hear some air in the lines. This is quite normal. Remove the water from the container. It’s now time to put your water dispenser to work!

Step 7: Reset the Change Water Filter Indicator

By pressing and holding the Crushed Ice button for three seconds, you may reset the Change Water Filter Indicator light. Do you need assistance with the water dispenser or ice maker on your Samsung refrigerator? For Samsung Certified Care on your refrigerator, get in touch with Unique Repair Services.

How to Change Water Filter on Samsung Refrigerator

Purchasing the proper water filter for your Samsung refrigerator can be a difficult task, and you may be unclear of how to go about installing the filter correctly. Change your Samsung Water filter at least once every six months in order to ensure the health of you and your family members. Is it difficult for you to understand how to change the filter on your Samsung refrigerator? You will no longer be perplexed by the situation. Want to know “how to change a Samsung water filter”? Look no further!

A full explanation of “how to change a water filter on a Samsung refrigerator?” has been provided by Swift Green Filters.

Additionally, we’ll explain all you need to know about replacing the water filter on a Samsung refrigerator before you purchase aSamsung Refrigerator Water Filter Replacement in this blog post.

Find the Correct Samsung Refrigerator WaterFilter Part Number for your Samsung Refrigerator

When it comes to replacing the Samsung water filter, the first and most important step is to identify the exact filter part number for your Samsung refrigerator. In order to accommodate different Samsung refrigerator models, several types of water filters are used. Samsung refrigerator water filters are divided into several groups based on their sizes and forms. Among these categories are: It is necessary to first identify the right water filter for your Samsung refrigerator before attempting to replace the water filter on the Samsung refrigerator.

See also:  How To Fill Camper Hot Water Heater?

Alternatively, if you are unfamiliar with any of these terms, you may quickly locate your appropriate Samsung refrigerator water filter by visiting this page:

Step by Step Solution to Learn How to Change the Water Filter on your Samsung Refrigerator

Swift Green Filters has simplified the process for you if you are faced with the question of “how to change Samsung water filter.” In order to make things as simple as possible for you, we will walk you through the process of locating the Samsung refrigerator water filter, removing the Samsung refrigerator water filter, and finally installing the Samsung water filter. You don’t need any technological knowledge to complete this task on your own.

  1. The following is the right replacement filter for your Samsung refrigerator: You may choose from a variety of appropriate water filters on the market that are designed to work with your Samsung refrigerator. While making a purchase, you may search for a certain filter part number or refrigerator model number. Make certain that you are selecting the appropriate filter for your Samsung refrigerator. Find the finest replacement water filter for your Samsung refrigerator. Examine your part to ensure you have the correct one: Each Samsung Refrigerator may utilize a unique model numberfilter part number. It implies that you must have the proper water filter for your refrigerator–not just any water filter will suffice
  2. And Locate the Samsung Water Filter on your refrigerator by following these steps: Finding the position of the Samsung refrigerator water filter is not a difficult task, but it might range from one Samsung refrigerator to another depending on the design
  3. Nonetheless, Prepare the filter for installation by doing the following: The following stage in the installation of a Samsung water filter is to prepare the filter for installation. To do this, you must first remove the plastic wrapping from the bottle and then unscrew the top cap. Make careful to switch off the water supply before removing the old Samsung refrigerator water filter so that the pressure does not become a hindrance during the removal process. Depending on the filter model you’re using, you’ll need to spin it counterclockwise, clockwise, or pull it straight out of the housing. Replacement of Samsung Water Filter: When replacing the old filter with a new one, make sure you follow the instructions in the handbook exactly. Simply pressing and holding down the water selector switch for three seconds will reset the Change Water Filter Indicator.

The following is a list of the most popular replacements for Samsung Refrigerator Water Filters that we sell. If you are currently using one of the refrigerator water filters listed below and would want to replace it, purchase the water filter that is most suitable with your Samsung refrigerator. In addition to DA2900020B,RF4287HARS,RF263BEAESR, HAFCIN, DA2900003B, DA29-00003F, and DA29-0002B, DA97-06317A, ES-1, and 9101 are also included in the list of DA2900020AH. ere, we’ve attempted to clarify all of the stages in a straightforward manner.

If you are still having difficulties replacing the water filter in your Samsung refrigerator, please do not hesitate to contact Swift Green Filters for more assistance or advice.

Shop By Category

Swift Green Filters provides a large selection of filtering products. This product is a suitable Replacement Water Filter for your existing water filter. The above-mentioned brands have neither commissioned or supported the development of this filter. Swift does not represent any of the brands mentioned above. All of the brand names and part numbers that have been mentioned have been used solely for the purpose of reference. Swift Green Filters is an independently owned and operated company.

The maximum liability is equal to two times the cost of the goods.

Samsung Fridge Filters: Easy-Guide to Replacing, Resetting and Changing.

Samsung is one of the most successful corporations in the world today. The South Korean technology corporation, which has its headquarters in Seoul’s Samsung Town, was initially started as a trade company, but it entered the electronics sector in the 1970s after expanding into other markets. Samsung declared in 2015 that it intended to surpass General Electric as the world’s largest appliance manufacturer. To achieve this, as you might expect, the company had to outperform numerous well-known global corporations, like Whirlpool, Bosch, and Electrolux, among others.

  • Samsung’s collection of home appliances will feature refrigerators that supplied sparkling as well as still, filtered drinking water, making them far more sophisticated than anything else that other household manufacturers were manufacturing at the time.
  • Samsung is unquestionably one of the world’s biggest appliance manufacturers, despite the fact that they are not exactly at the top of the scoreboard that has just been established.
  • One of the reasons water tastes so much better when it comes out of a Samsung refrigerator is due to the superior filtering system that the refrigerator has installed.
  • It is critical that you update your Samsung water filter on a regular basis if you want to continue drinking wonderful water at home.
  • This will result in terrible tasting drinks that you will be embarrassed to give your friends and family.

We’ve put together a simple tutorial on everything you need to know about replacing your Samsung fridge filter at home so that you can continue to be proud of your great beers, clean water, and crystal-clear ice.

1. How to replace RSG5UCRS Samsung Fridge Filter:

When it comes to replacing your RSG5UCRS Samsung Fridge Filter, we have some good news for you: it’s more simpler than you would imagine. When the filter indicator light becomes orange or pink, it indicates that a new filter should be purchased. When the filter indicator becomes red, it is time to replace it. If six months have passed and the indication light has not gone red, we nonetheless recommend that you replace the filter in order to preserve the excellent quality of your drinking water at all times.

Only internal filters should be replaced according to the procedures provided below.

  1. The old water filter may be removed by turning it 45 degrees to the left to open it
  2. At this point, gently remove the old water filter and toss it away
  3. The water will stop off automatically at this time. Insert the new water filter into the available area and rotate it 45 degrees to the right
  4. If the padlock symbol on the filter corresponds to the sign on the filter, the filter is in the proper position. Immediately following the installation of the new filter, push the water filter reset button for three seconds to reset the light indicator.

Suggestions for improvement In the event that you are having difficulty removing the water filter, it is possible that there is excessive water pressure behind the filter. Remove the top two refrigerator shelves and use a stronger pull on the filter to get it out. If you are unable to squeeze the new filter into the available area, turn off the water supply valve and dispense a little amount of water. As a result, the pressure will be reduced, making it easier to install the new filter. All of the steps that follow are for external filters only.

Instructions on how to change an internal filter may be found further up the page.

  1. Immediately turn off the water supply
  2. Remove the old cartridge from the system and dispose of it properly
  3. The water filter should be positioned such that it flows in the direction of the refrigerator
  4. The inlet and exit tubing should be connected to the proper end of the filter by firmly inserting the tube all the way into the filter until it is snugly shut
  5. Check to see that the tube is square and free of scratches – you may trim it if required. The filter clip should be installed according to the directions in the installation manual. Make sure there are no leaks in the filter by turning on the water. Re-do the installation processes and check again whether there are any leaks. If the leaks continue, remove the filter and contact customer service. Allow water to circulate through the filter for five minutes in order to clean the entire system.

2.How to Replace a DA29-00003F Water Filter

The DA29-00003F water filter is a replacement for the DA29-00003G, DA29-00003B, and DA29-00003A water filters, among others. In no way is it a substitute for the superior DA29-00003G filter, nor is it compatible with that more sophisticated filter. The replacement of an internalDA29-00003F water filter is described in the following instructions.

  1. The old water filter may be removed by turning it 45 degrees to the left to open it
  2. Gently take it out and throw it away — this will cause the water to cut off automatically
  3. To install the replacement water filter, insert it and rotate it 45 degrees to the right to secure it in place
  4. If the padlock sign on the water filter corresponds to the symbol on the water filter, you have completed the task successfully. To reset the water filter indication, press and hold the water filter reset button for three seconds.
See also:  How Much Is A 50 Gallon Water Heater

Suggestions for improvement In the event that you are having difficulty removing the water filter, it is possible that there is excessive water pressure behind the filter. Remove the top two refrigerator shelves and use a stronger pull on the filter to get it out. If you are unable to squeeze the new filter into the available area, turn off the water supply valve and dispense a little amount of water. As a result, the pressure will be reduced, making it easier to install the new filter.

3. How to Reset the Water Filter Indicator Light on a Samsung Fridge

In addition to the water filter, every Samsung refrigerator that has one features a water filter indicator that tells you when it’s time to replace the water cartridge. The filter should be replaced once every six months regardless of whether or not the light changes color. This will ensure that you continue to drink the high-quality water that you have come to like. If you don’t change your water filter on a regular basis, it won’t function properly. Instead of drinking great-tasting, clean water, you’ll be forced to drink strange-tasting water that may include unwelcome toxins.

Blue indicates that your water filter is performing properly.

Red:Your water filter has reached the end of its useful life and it is time to replace it with a new one.

By pushing and holding the “Alarm / Hold for 3 seconds to Reset Filter” button for three seconds, you may reset the indicator light.

If your model has an inside control panel, press and hold the “Power Cool” and “Fridge” buttons for three seconds at the same time. This will return the indicator light to its original blue state.

4. How to Replace a DA29-00003G Samsung Fridge Filter

Instructions for internal filters are provided in the next section. The Samsung DA29-00003G water filter is always installed from inside the device itself.

  1. To remove the old water filter, twist it a quarter turn to the left to free it
  2. Then lift it out. Gently remove the old water filter and throw it away
  3. This will cause the water to be switched off automatically. Insert the new water filter and rotate it by a quarter turn to the right until it is secure. If the padlock sign on the water filter corresponds to the symbol on the water filter, you have successfully installed it. The water filter indication should be reset after installation by pressing the water filter reset button for three seconds after completion.

Suggestions for improvement In the event that you are having difficulty removing the water filter, it is possible that there is excessive water pressure behind the filter. Remove the top two refrigerator shelves and use a stronger pull on the filter to get it out. If you are unable to squeeze the new filter into the available area, turn off the water supply valve and dispense a little amount of water. As a result, the pressure will be reduced, making it easier to install the new filter.

5. Why You Need to Change Your Fridge Filter Every 6 Months

You might believe that you only need to change your refrigerator filter when the indicator light indicates that you should – but this is not the case. In some cases, waiting until the light goes red might be harmful to your health. A water filter prevents pollutants from flowing through the pipes and into your drinking water supply. When the water filter is no longer functional, all of the impurities that have been caught can now pass through into your drinking water, making it even worse than if you had not used a water filter at all.

Each Samsung water filter contains activated carbon filter material that has been approved for usage with a specific amount of water before the cartridge has to be replaced.

By absorbing impurities from water, activated carbon serves as a filter for such contaminants.

This occurs when there is no more surface area available for the absorption of additional pollutants and the filter’s capacity has been achieved.

How To Replace The Samsung Food Showcase Water Filter

Water and ice dispensers are included in the Samsung Food Showcase refrigerator, and the dispensers are fitted with an impressive filtering function. It improves the flavor, eliminates the odor, and removes particles from the food. This guarantees that every pore in your body receives clean and fresh taste water. The filter indication light on the refrigerator panel allows you to keep track of how much filter is being used. Whenever the filter indicator is either blue or green, this indicates that your filter has at least 90 percent of its usable life left in it.

  • This warning indicates that you should change your water filter before the signal turns red.
  • When it comes time to install a new water filter, the HAF-CIN Refrigerator Water Filter (HAF-CIN/EXP) should be used instead of the standard water filter.
  • Make sure that the water supply to your refrigerator is turned off before you begin removing the old water filter.
  • A cloth or dish will come in helpful when you need to remove the filter from the machine.
  • Remove the old cartridge by slowly turning it counter clockwise a quarter of the way and removing it.
  • Insert the replacement filter cartridge so that the lock sign is pointing to the left on the side of the machine.
  • When you’ve finished filling the cartridge, press the stop and lock icon.
  • Replenish the water supply and dispense the water for approximately 6 minutes, or approximately 3 gallons, to thoroughly flush the system.
  • The last step is to open up the refrigerator door and check for any leaks around the filter area.

You’re now ready to drink clean, refreshing water whenever you want. We recommend that you only use authentic Samsung replacement water filters, which can be acquired at authorized Samsung service locations, to ensure the highest quality.

Amazon.com: SAMSUNG – DA29-00020B-2P Samsung Electronics HAF-CIN Refrigerator Water Filter, white, (Pack of 2) , Packaging May vary : Appliances

a rating of one out of five stars Product that is a forgery. The Walmart product I purchased in-store was genuine! On March 21, 2020, a review was conducted in the United States. Don’t buy anything from Amazon since it is a phony. Read the paragraphs and pay close attention to the font size and style. The one on the right is the genuine article. I’ve always thought of it as being similar to the one that came with the refrigerator. Walmart has never failed to deliver on its promises. (It’s hard to tell from the photographs.) “Their” printer is a jerk!

I couldn’t believe Amazon would allow this to happen.

Even the most obvious signs are often overlooked by average customers.

Top reviews from the United States

the rating is one out of five Product that is a counterfeit of the original. I purchased a genuine Walmart goods in store. On March 21, 2020, the United States will conduct a review of this document. Buy from a legitimate retailer rather than from Amazon. Pay close attention to the writings and the typeface. This is the genuine article. I’ve always thought of it as being similar to the one that came with my refrigerator. With Walmart, there’s never been a dud. Despite the fact that it is not obvious in the photographs, They have a terrible printer!

Amazon enables this in some way, I couldn’t believe it.

Ordinary customers will always overlook the most obvious indications.

Top reviews from other countries

a rating of one star out of five Product that is not authentic. The Walmart product I purchased in-store was legitimate! The review will take place in the United States on March 21, 2020. Don’t purchase anything from Amazon since it is a phony. Take time to read the texts and pay close attention to the typeface. The right one is the genuine article. I’ve always thought of it as being similar to the one that came with the fridge. Walmart has never let me down. (It’s difficult to tell from the photographs.) “Their” printer is a piece of junk!

Is it possible that Amazon enables this in some way?

Even the most obvious indications will be missed by frequent buyers.

Leave a Reply

Your email address will not be published.