Brooks GT1000

Brooks GT1000 glass tube rotameters provide 2% FS accuracy (1% optional) in a rugged construction suitable for a wide range of applications. Its O-ring seal design minimizes process downtime by allowing for convenient in-line removal of the glass tube for cleaning and maintenance. Available with FM/CSA/NRTL/C alarms for Div 1 intrinsically safe, and Div 2 applications.

• Flanged or NPT connections
• Horizontal or vertical connections
• Horizontal end fittings 360 degrees rotatable
• Fluid resistant O-ring design allows tube removal without removal from the process piping
• Panel mounting options available

Brooks GT1100

Brooks GT1100 glass tube rotameters provide 2% FS accuracy (1% optional) in a wide variety of configurations to meet a broad range of metering applications. Its packing gland seal design provides long-term, leak-free, reliable flow measurement. Available with FM/CSA/NRTL/C alarms for Div 1 intrinsically safe, and Div 2 applications.

• Wide choice of application-specific materials and connections
• Reliable, externally-adjustable packing glands for ease of maintenance
• Flanged or NPT connections with horizontal or vertical inlet and outlet orientation
• Connections rotatable 360° at 90° intervals

Brooks GT1305

Brooks GT1305 glass tube rotameter provides 10% FS accuracy (5% optional) for low-cost measurement in general installations where the operating pressure is within the limitations imposed by the use of borosilicate glass tubes. These instruments are provided with O-ring seals and can be supplied with brass or 316 SS female threaded end fittings.

• Capacity ranges 0.8 to 50 gpm; 3 to 50 scfm
• O-ring seal construction
• Sturdy bolted side-plate construction
• Vertical inlets and outlets standard, horizontal outlet with alarm
• Alarm switch adjustable for high or low flow indication

Brooks 1350 and 1355 Series

Brooks Sho-Rate 1350 and 1355 series of low flow indicators provides a cost-effective means of flow indication for both 10% (Model 1350) and 5% (Model 1355) accuracy requirements. Options include the integral needle control valves, as well as flow controllers on the inlet or outlet.

• Ten-to-one rangeability
• Wide range of scales on the metering tube with contrasting background for easy readability
• Tubes sealed on compression gasket by threaded seal spindle
• Interchangeable tubes and floats removable without disconnecting instrument

Brooks Model GT1510 LFC™

Brooks Model GT1510 LFC™ glass tube flowmeters provide cost effective flow indication where accuracy requirements are not severe (10% FS). Meters are constructed of 316 SS with ten-to-one rangeability and include a wide range of scales on the metering tube with contrasting background for easy readability.

• Ten-to-one rangeability
• All wetted parts 316 stainless steel
• Tube sealed on compression gasket by threaded 316 stainless steel seal spindle
• Interchangeable tubes and floats removable without disconnecting instrument
• 316 stainless steel check valve in outlet fitting

SIEMENS SITRANS FUS1010

SITRANS FUS1010 (Liquid Flow) is the most versatile clamp-on ultrasonic flowmeter available. Because it can operate in either WideBeam Transit Time or Doppler mode there is no need to change the meter when operating conditions change. This makes it suitable for virtually any liquid, even those with high aeration or suspended solids. The meter is available in single, dual channel/dual path and optional four channel/four path configurations.

• Suitable for a wide variety of liquid applications
• Optional four channels allow measurement of four independent pipes at the same time, reducing overall ownership costs

SIEMENS SITRANS FUP1010

SITRANS FUP1010 (Portable) clamp-on non-intrusive ultrasonic flowmeter offers maximum versatility plus battery power for portable field use. It can operate in either WideBeam transit time or Doppler mode, making it suitable for virtually any liquid. The meter is ideal for general flow survey work where high accuracy is required and is available in single and dual channel or dual path configurations.

• Rugged plastic waterproof case enables it to withstand rough treatment that would destroy most other meters
• Choice of single or dual channel models minimizes total cost
• Zeromatic Path automatically sets zero without stopping flow and reduces zero drift, even at low flow conditions

SIEMENS SITRANS FUH1010

SITRANS FUH1010 (Oil) are ideal for applications carrying crude oil, refined petroleum or liquefied gas. There are meters for two application areas: viscosity compensated volumetric flowmeters and standard volume (net) mass flowmeters.

• Pipe Sizes From 0.25" to 360"
• Accuracy From ±0.5 to 1%
• Repeatability From ±0.05% to ±0.1% of actual volume

SIEMENS SITRANS FUH1010

SITRANS FUH1010 (Interface Detection) meter is ideal for oil applications where a differentiation between various liquids, or product cut, in a pipeline is needed.
Outputs of liquid density and API Number as a direct replacement for intrusive densitometers
Exceptional repeatability is maintained, independent of changes in temperature, pressure or viscosity
No cutting of pipe required, reducing potentially hazardous leak points.

SIEMENS SITRANS FUG1010

SITRANS FUG1010 (Gas) flowmeters suit most natural and process gas applications, including check-metering, allocation, flow survey verification, lost and unaccounted for (LAUF) gas analysis, production and storage.

• Tolerant of most wet gas conditions
• Immune to most pressure reducing valve noise
• Optional rugged stainless steel transducer enclosure permits permanent and direct burial installations

SIEMENS SITRANS FUE1010

SITRANS FUE1010 (Energy) meters are ideally suited to thermal energy/power industry applications such as chilled & hot water sub-metering, condenser water, potable water and glycol and brine solution, thermal storage.

• Measures energy rate and total consumption with high accuracy
• Accurately measures at both low flow rates and low differential temperatures
• Dual mode allows for transit time and Doppler operation at the same time on the same pipe

SIEMENS SITRANS FUE1010

SITRANS F US Thickness Gauge utilized to calculate the pipe wall thickness of the pipe being measured should be paired with clamp-on meters to ensure precise results.

• Measures the wall thickness of any pipe
• Measures pipe thickness from 0.03 to 7.9 inches (0.1 to 200 mm)
• Works on various metallic and non-metallic pipe materials such as steel, aluminum, titanium, plastics and ceramics
• Results are shown in either inches or millimeters

Brooks BM Oval Gear Meters

Brooks BM Oval Gear Meters are low flow positive displacement flow meters designed for applications requiring the high accuracy measurement of clean liquids with viscosities less than 1000 Cp. Units are available with a pulse output from a Reed switch or solid state Hall effect switch for remote registration and/or totalization.

• Sizes:1/4" to 2” 
• Flow Range:0.53 GPH - 92.5 GPM
• Accuracy:±0.5% - 1% or better
• Repeatability: ±0.03%

Brodie BiRotor Plus™

Brodie BiRotor Plus™ meter is a volumetric flow measuring device designed for the accurate measurement of petroleum liquids in a variety of applications. This double case meter combines the rugged durability and long service life of the traditional BiRotor meter with the improved accuracy and pulse output associated with today’s most sophisticated devices.

• Sizes:3", 4" and 6"
• Flow Range:65 GPM - 1000 GPM Normal, 40 GPM - 1200 GPM Extended
• Accuracy:±0.075% or better over 30:1 Flow Range
• Linearity: ±0.10% over 13:1 flow range on 3”
• ±0.075% or better over 30:1 flow range on 4”
• Repeatability: ±0.01%

Brodie 9400 & 9800 Oval Gear Meters

Brodie 9400 & 9800 Oval Gear Meters ranging from ½” to 3” are particularly well suited to Chemical, Food & Beverage, and Pharmaceutical industries. The oval gears in these meters are virtually unaffected by changes in viscosity, maintaining their accuracy even when handling low viscosity products at low flow rates.

• Flow Range: 0.4 GPM - 396 GPM
• Accuracy: ±0.25% over 10:1 Flow Range for Viscosity > 5cP
• ±0.05% over 10:1 Flow Range for Viscosity < 5cP
• Repeatability: ±0.05% over 10:1 Flow Range

BRODIE 790 Series Vane Meter

790 Series Vane Meter by Brodie is designed for waterflood service and oil service. It is compact and reliable, having only one moving part. The register is a hermetically sealed unit with magnetic drive and is protectively sealed against moisture and dirt. No stuffing box, no wetted gear train, and dependable accuracy help make this meter the most reliable unit in its field.

GPI Turbine Meters

Turbine meters can be relied on for use on waterflood secondary recovery, fuel metering systems, LPG, and petroleum products. We offer these products with process connections from ¼” NPT to 3” 150# ANSI-flanged connections. The GPI turbine meter line has a proven track record in the industrial market. GPI Stainless Steel Meters are extremely rugged and undoubtedly dependable.