Siemens Controlotron logo

The ultrasonic technology of the Siemens, formerly Controlotron, SITRANS 1010 clamp-on flowmeter provides highly accurate measurement of liquids and gases. With no pressure drop, a wide turn-down ratio and no need to cut the pipe or stop the flow, installation is easy and maintenance is minimal.

 
Flow: Clamp-on Ultrasonic

The Siemens ultrasonic technology employs three main types: Transit-Time, WideBeam Transit-Time and Doppler signal processing. Transit-Time provides an innovative direct ultrasound transmission technique that ensures reliable and accurate signal detection for a wide range of processes. WideBeam Transit-Time is the preferred choice when the best accuracy is desired for both liquid and gas applications. Doppler technology makes it possible to measure liquids which contain very high levels of aeration or suspended solids.

 


Download PDF Data Sheet

SITRANS FUS1010

SITRANS FUS1010 (Liquid Flow) is the most versatile clamp-on ultrasonic flowmeter available. Because it can operate in either WideBeam Transit Time or Doppler mode there is no need to change the meter when operating conditions change. This makes it suitable for virtually any liquid, even those with high aeration or suspended solids. The meter is available in single, dual channel/dual path and optional four channel/four path configurations.

  • Suitable for a wide variety of liquid applications
  • Optional four channels allow measurement of four independent pipes at the same time, reducing overall ownership costs
 


Download PDF Data Sheet

SITRANS FUP1010 Portable

SITRANS FUP1010 (Portable) clamp-on non-intrusive ultrasonic flowmeter offers maximum versatility plus battery power for portable field use. It can operate in either WideBeam transit time or Doppler mode, making it suitable for virtually any liquid. The meter is ideal for general flow survey work where high accuracy is required and is available in single and dual channel or dual path configurations.

  • Rugged plastic waterproof case enables it to withstand rough treatment that would destroy most other meters
  • Choice of single or dual channel models minimizes total cost
  • Zeromatic Path automatically sets zero without stopping flow and reduces zero drift, even at low flow conditions
 


Download PDF Data Sheet

SITRANS FUH1010

SITRANS FUH1010 (Oil) are ideal for applications carrying crude oil, refined petroleum or liquefied gas. There are meters for two application areas: viscosity compensated volumetric flowmeters and standard volume (net) mass flowmeters.

  • Pipe Sizes From 0.25" to 360"
  • Accuracy From ±0.5 to 1%
  • Repeatability From ±0.05% to ±0.1% of actual volume
 


Download PDF Data Sheet

SITRANS FUG1010

SITRANS FUG1010 (Gas) flowmeters suit most natural and process gas applications, including checkmetering, allocation, flow survey verification, lost and unaccounted for (LAUF) gas analysis, production and storage.

  • Tolerant of most wet gas conditions
  • Immune to most pressure reducing valve noise
  • Optional rugged stainless steel transducer enclosure permits permanent and direct burial installations
 


Download PDF Data Sheet

SITRANS FUT1010 ULTRASONIC SPOOL

The Siemens FUT1010 spool based ultrasonic flowmeter is ideal for applications within the liquid and gas hydrocarbon industry. With the newly developed permanent TransLoc™ mounting system, the sensors are permanently mounted on the outside of the pipe, eliminating any contact with the medium.

  • Superior Accuracy
  • Completely cavity free design
  • Automatically corrects for zero drift with no interruption of flow
  • Large bi-directional flow range
  • Dynamic Reynolds Number compensation
 


Download PDF Data Sheet

SITRANS FUE1010 Energy Meter

SITRANS FUE1010 (Energy) meters are ideally suited to thermal energy/power industry applications such as chilled & hot water sub-metering, condenser water, potable water and glycol and brine solution, thermal storage.

  • Measures energy rate and total consumption with high accuracy
  • Accurately measures at both low flow rates and low differential temperatures
  • Dual mode allows for transit time and Doppler operation at the same time on the same pipe
 


Download PDF Data Sheet

SITRANS FUH1010 Interface Detector (IFD)

SITRANS FUH1010 (Interface Detection) meter is ideal for oil applications where a differentiation between various liquids, or product cut, in a pipeline is needed.

  • Outputs liquid density and API No. as a direct replacement for intrusive densitometers
  • Exceptional repeatability is maintained, independent of changes in temperature, pressure or viscosity
  • No cutting of pipe required, reducing potentially hazardous leak points

 


Download PDF Data Sheet

SITRANS F US

SITRANS F US Thickness Gauge utilized to calculate the pipe wall thickness of the pipe being measured should be paired with clamp-on meters to ensure precise results.

  • Measures the wall thickness of any pipe
  • Measures pipe thickness from 0.03 to 7.9 inches (0.1 to 200 mm)
  • Works on various metallic and non-metallic pipe materials such as steel, aluminum, titanium, plastics and ceramics
  • Results are shown in either inches or millimeters
 





quotebutton